rt-thread-official/bsp/stm32f20x/Drivers/board.h

122 lines
3.9 KiB
C
Raw Normal View History

/*
* File : board.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-09-22 Bernard add board.h to this bsp
*/
// <<< Use Configuration Wizard in Context Menu >>>
#ifndef __BOARD_H__
#define __BOARD_H__
#include <stm32f2xx.h>
/* board configuration */
// <o> SDCard Driver <1=>SDIO sdcard <0=>SPI MMC card
// <i>Default: 1
#define STM32_USE_SDIO 1
/* whether use board external SRAM memory */
// <e>Use external SRAM memory on the board
// <i>Enable External SRAM memory
#define STM32_EXT_SRAM 0
// <o>Begin Address of External SRAM
// <i>Default: 0x68000000
#define STM32_EXT_SRAM_BEGIN 0x68000000 /* the begining address of external SRAM */
// <o>End Address of External SRAM
// <i>Default: 0x68080000
#define STM32_EXT_SRAM_END 0x68080000 /* the end address of external SRAM */
// </e>
// <o> Internal SRAM memory size[Kbytes] <8-128>
// <i>Default: 64
#define STM32_SRAM_SIZE 128
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
// <o> Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3
// <i>Default: 1
#define STM32_CONSOLE_USART 1
// <o> Ethernet Interface: <0=> Microchip ENC28J60
#define STM32_ETH_IF 0
void rt_hw_board_led_on(int n);
void rt_hw_board_led_off(int n);
void rt_hw_board_init(void);
#if STM32_CONSOLE_USART == 0
#define CONSOLE_DEVICE "no"
#elif STM32_CONSOLE_USART == 1
#define CONSOLE_DEVICE "uart1"
#elif STM32_CONSOLE_USART == 2
#define CONSOLE_DEVICE "uart2"
#elif STM32_CONSOLE_USART == 3
#define CONSOLE_DEVICE "uart3"
#endif
#if STM32_USE_SDIO
/**
* @brief SD FLASH SDIO Interface
*/
#define SD_DETECT_PIN GPIO_Pin_0 /* PB.0 */
#define SD_DETECT_GPIO_PORT GPIOB /* GPIOB */
#define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOB
#define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80)
/**
* @brief SDIO Intialization Frequency (400KHz max)
*/
#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
/**
* @brief SDIO Data Transfer Frequency (25MHz max)
*/
#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
#define SD_SDIO_DMA DMA2
#define SD_SDIO_DMA_CLK RCC_AHB1Periph_DMA2
#define SD_SDIO_DMA_STREAM3 3
//#define SD_SDIO_DMA_STREAM6 6
#ifdef SD_SDIO_DMA_STREAM3
#define SD_SDIO_DMA_STREAM DMA2_Stream3
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3
#elif defined SD_SDIO_DMA_STREAM6
#define SD_SDIO_DMA_STREAM DMA2_Stream6
#define SD_SDIO_DMA_CHANNEL DMA_Channel_4
#define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6
#define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6
#define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6
#define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6
#define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6
#endif /* SD_SDIO_DMA_STREAM3 */
void SD_LowLevel_DeInit(void);
void SD_LowLevel_Init(void);
void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize);
void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize);
#endif
void rt_hw_usart_init(void);
/* SD Card init function */
void rt_hw_msd_init(void);
/* ETH interface init function */
#endif
// <<< Use Configuration Wizard in Context Menu >>>