rt-thread-official/bsp/ls1cdev/drivers/selfboot.h

/*
 * Copyright (c) 2006-2019, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2019-12-04     Jiaxun Yang  Initial version
 */

#ifndef __RT_LS1C_SELFBOOT_H
#define __RT_LS1C_SELFBOOT_H

/* SDRAM PARAM macro */
#define	SD_FREQ	(((APB_CLK / 4) * (PLL_MULT / CPU_DIV)) / SDRAM_PARAM_DIV_NUM)


/* SDRAM ROW */
#define	ROW_1K		0x7
#define	ROW_2K		0x0
#define	ROW_4K		0x1
#define	ROW_8K		0x2
#define	ROW_16K		0x3
/* SDRAM COL */
#define	COL_256		0x7
#define	COL_512		0x0
#define	COL_1K		0x1
#define	COL_2K		0x2
#define	COL_4K		0x3
/* SDRAM WIDTH */
#define	WIDTH_8		0x0
#define	WIDTH_16	0x1
#define	WIDTH_32	0x2

#define	TRCD		3
#define	TCL			3
#define	TRP			3
#define	TRFC		8
#define	TRAS		6
#define	TREF		0x818
#define	TWR			2

#define	DEF_SEL		0x1
#define	DEF_SEL_N	0x0
#define	HANG_UP		0x1
#define	HANG_UP_N	0x0
#define	CFG_VALID	0x1

#include "board.h"

#define	SD_PARA0	(0x7f<<25 | \
					(TRAS << 21) | \
					(TRFC << 17) | (TRP << 14) | (TCL << 11) | \
					(TRCD << 8) | (SDRAM_WIDTH << 6) | (SDRAM_COL << 3) | \
					SDRAM_ROW)

#define	SD_PARA1	((HANG_UP_N << 8) | (DEF_SEL_N << 7) | (TWR << 5) | (TREF >> 7))

#define	SD_PARA1_EN	((CFG_VALID << 9) | (HANG_UP_N << 8) | \
					(DEF_SEL_N << 7) | (TWR << 5) | (TREF >> 7))

#define LS1C_CBUS_FIRST1      0xBFE011C4
#define LS1C_UART2_BASE       0xBFE48000

/* UART register offset*/
#define LS1C_UART_DAT_OFFSET            (0)
#define LS1C_UART_IER_OFFSET            (1)
#define LS1C_UART_IIR_OFFSET            (2)
#define LS1C_UART_FCR_OFFSET            (2)
#define LS1C_UART_LCR_OFFSET            (3)
#define LS1C_UART_MCR_OFFSET            (4)
#define LS1C_UART_LSR_OFFSET            (5)
#define LS1C_UART_MSR_OFFSET            (6)

#define LS1C_UART_LSB_OFFSET            (0)
#define LS1C_UART_MSB_OFFSET            (1)

/* interrupt enable register */
#define	IER_IRxE	0x1
#define	IER_ITxE	0x2
#define	IER_ILE	    0x4
#define	IER_IME	    0x8

/* interrupt identification register */
#define	IIR_IMASK	0xf	/* mask */
#define	IIR_RXTOUT	0xc	/* receive timeout */
#define	IIR_RLS		0x6	/* receive line status */
#define	IIR_RXRDY	0x4	/* receive ready */
#define	IIR_TXRDY	0x2	/* transmit ready */
#define	IIR_NOPEND	0x1	/* nothing */
#define	IIR_MLSC	0x0	/* modem status */
#define	IIR_FIFO_MASK	0xc0	/* set if FIFOs are enabled */

/* fifo control register */
#define	FIFO_ENABLE	0x01	/* enable fifo */
#define	FIFO_RCV_RST	0x02	/* reset receive fifo */
#define	FIFO_XMT_RST	0x04	/* reset transmit fifo */
#define	FIFO_DMA_MODE	0x08	/* enable dma mode */
#define	FIFO_TRIGGER_1	0x00	/* trigger at 1 char */
#define	FIFO_TRIGGER_4	0x40	/* trigger at 4 chars */
#define	FIFO_TRIGGER_8	0x80	/* trigger at 8 chars */
#define	FIFO_TRIGGER_14	0xc0	/* trigger at 14 chars */

/* character format control register */
#define	CFCR_DLAB	0x80	/* divisor latch */
#define	CFCR_SBREAK	0x40	/* send break */
#define	CFCR_PZERO	0x30	/* zero parity */
#define	CFCR_PONE	0x20	/* one parity */
#define	CFCR_PEVEN	0x10	/* even parity */
#define	CFCR_PODD	0x00	/* odd parity */
#define	CFCR_PENAB	0x08	/* parity enable */
#define	CFCR_STOPB	0x04	/* 2 stop bits */
#define	CFCR_8BITS	0x03	/* 8 data bits */
#define	CFCR_7BITS	0x02	/* 7 data bits */
#define	CFCR_6BITS	0x01	/* 6 data bits */
#define	CFCR_5BITS	0x00	/* 5 data bits */

/* modem control register */
#define	MCR_LOOPBACK	0x10	/* loopback */
#define	MCR_IENABLE	0x08	/* output 2 = int enable */
#define	MCR_DRS		0x04	/* output 1 = xxx */
#define	MCR_RTS		0x02	/* enable RTS */
#define	MCR_DTR		0x01	/* enable DTR */

/* line status register */
#define	LSR_RCV_FIFO	0x80	/* error in receive fifo */
#define	LSR_TSRE	0x40	/* transmitter empty */
#define	LSR_TXRDY	0x20	/* transmitter ready */
#define	LSR_BI		0x10	/* break detected */
#define	LSR_FE		0x08	/* framing error */
#define	LSR_PE		0x04	/* parity error */
#define	LSR_OE		0x02	/* overrun error */
#define	LSR_RXRDY	0x01	/* receiver ready */
#define	LSR_RCV_MASK	0x1f


/* External clock frequency */
#define AHB_CLK                 (24000000)
#define APB_CLK                 (AHB_CLK)


/* START_FREQ register bits */
#define M_PLL_SHIFT             (8)
#define M_PLL                   (0xff << M_PLL_SHIFT)
#define FRAC_N_SHIFT            (16)
#define FRAC_N                  (0xff << FRAC_N_SHIFT)
#define DIV_SDRAM_SHIFT         (0)
#define DIV_SDRAM               (0x3  << DIV_SDRAM_SHIFT)

/* CLK_DIV_PARAM register bits */
#define DIV_PIX_EN              (0x1  << 31)
#define DIV_PIX                 (0x7f << 24)
#define DIV_CAM_EN              (0x1  << 23)
#define DIV_CAM                 (0x7f << 16)
#define DIV_CPU_EN              (0x1  << 15)
#define DIV_CPU                 (0x7f << 8)
#define DIV_PIX_VALID           (0x1  << 5)
#define DIV_PIX_SEL             (0x1  << 4)
#define DIV_CAM_VALID           (0x1  << 3)
#define DIV_CAM_SEL             (0x1  << 2)
#define DIV_CPU_VALID           (0x1  << 1)
#define DIV_CPU_SEL             (0x1  << 0)

#define DIV_PIX_SHIFT           (24)
#define DIV_CAM_SHIFT           (16)
#define DIV_CPU_SHIFT           (8)

#endif