rt-thread-official/bsp/synopsys/embarc/device/designware/gpio/dw_gpio.h

146 lines
4.9 KiB
C
Raw Normal View History

/* ------------------------------------------
* Copyright (c) 2016, Synopsys, Inc. All rights reserved.
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1) Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
* 3) Neither the name of the Synopsys, Inc., nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* \version 2016.05
* \date 2014-07-22
* \author Wayne Ren(Wei.Ren@synopsys.com)
--------------------------------------------- */
/**
* \file
* \brief designware gpio driver
* \ingroup DEVICE_DW_GPIO
* \brief Designware GPIO driver header file
*/
#ifndef _DW_GPIO_H_
#define _DW_GPIO_H_
#include "device/device_hal/inc/dev_gpio.h"
#include "inc/arc/arc_exception.h"
#define DW_GPIO_PORT_A (0x00)
#define DW_GPIO_PORT_B (0x01)
#define DW_GPIO_PORT_C (0x02)
#define DW_GPIO_PORT_D (0x03)
#define DW_GPIO_INT_ACT_LOW GPIO_INT_ACTIVE_LOW
#define DW_GPIO_INT_ACT_HIGH GPIO_INT_ACTIVE_HIGH
#define DW_GPIO_INT_LEVEL_TRIG GPIO_INT_LEVEL_TRIG
#define DW_GPIO_INT_EDGE_TRIG GPIO_INT_EDGE_TRIG
#define DW_GPIO_INT_NO_DEBOUNCE GPIO_INT_NO_DEBOUNCE
#define DW_GPIO_INT_DEBOUNCE GPIO_INT_DEBOUNCE
#define DW_GPIO_ALL_ZERO (0x0)
#define DW_GPIO_ALL_ONE (0xffffffff)
#define DW_GPIO_MASK_ALL (0xffffffff)
#define DW_GPIO_INPUT_ALL (0x0)
#define DW_GPIO_OUTPUT_ALL (0xffffffff)
/**
* \name DesignWare GPIO Register Structure
* \brief contains definitions of DesignWare GPIO register structure.
* @{
*/
typedef struct port_ctrl {
uint32_t DR;
uint32_t DDR;
uint32_t CTRL;
} PORT_CTRL;
/* DW GPIO PORTS Registers */
typedef volatile struct dw_gpio_reg {
PORT_CTRL SWPORTS[4];
uint32_t INTEN; /*!< (0x30) */
uint32_t INTMASK; /*!< (0x34) */
uint32_t INTTYPE_LEVEL; /*!< (0x38) */
uint32_t INT_POLARITY; /*!< (0x3c) */
uint32_t INTSTATUS; /*!< (0x40) */
uint32_t RAW_INTSTATUS; /*!< (0x44) */
uint32_t DEBOUNCE; /*!< (0x48) */
uint32_t PORTA_EOI; /*!< (0x4c) */
uint32_t EXT_PORTS[4]; /*!< (0x50) -A
(0x54) -B
(0x58) -C
(0x5c) -D */
uint32_t LS_SYNC; /*!< (0x60) */
uint32_t ID_CODE; /*!< (0x64) */
uint32_t RESERVED_3; /*!< (0x68) */
uint32_t VER_ID_CODE; /*!< (0x6c) */
uint32_t CONFIG_REG2; /*!< (0x70) */
uint32_t CONFIG_REG1; /*!< (0x74) */
} DW_GPIO_REG, *DW_GPIO_REG_PTR;
/** @} */
/** interrupt handler for each port bit */
typedef struct dw_gpio_bit_isr {
uint32_t int_bit_max_cnt; /*!< max bit count for each port */
DEV_GPIO_HANDLER *int_bit_handler_ptr; /*!< interrupt handler pointer */
} DW_GPIO_BIT_ISR, * DW_GPIO_BIT_ISR_PTR;
/**
* \brief DesignWare GPIO control structure definition
* \details implement of dev_gpio_info::gpio_ctrl
*/
typedef struct dw_gpio_port {
uint32_t no; /*!< gpio port number */
DW_GPIO_REG_PTR regs; /*!< gpio port register */
uint32_t intno; /*!< gpio interrupt vector number */
uint32_t valid_bit_mask; /*!< valid bit mask of gpio port */
INT_HANDLER int_handler; /*!< gpio interrupt handler */
DW_GPIO_BIT_ISR_PTR gpio_bit_isr; /*!< gpio bit handler struct */
} DW_GPIO_PORT, *DW_GPIO_PORT_PTR;
#ifdef __cplusplus
extern "C" {
#endif
/**
* \name DesignWare GPIO Function Declaration
* \brief contains declarations of designware gpio functions.
* \details This are only used in gpio object implementation source file
* @{
*/
extern int32_t dw_gpio_open(DEV_GPIO *gpio_obj, uint32_t dir);
extern int32_t dw_gpio_close(DEV_GPIO *gpio_obj);
extern int32_t dw_gpio_read(DEV_GPIO *gpio_obj, uint32_t *val, uint32_t mask);
extern int32_t dw_gpio_write(DEV_GPIO *gpio_obj, uint32_t val, uint32_t mask);
extern int32_t dw_gpio_control(DEV_GPIO *gpio_obj, uint32_t ctrl_cmd, void *param);
extern int32_t dw_gpio_isr_handler(DEV_GPIO *gpio_obj, void *ptr);
#ifdef __cplusplus
}
#endif
/** @} */
#endif /* _DW_GPIO_H_ */