rt-thread-official/bsp/hc32/libraries/hc32f448_ddl/ChangeLog.md

# Update History
------
## V1.1.0  Dec 15, 2023
#### documents
#### drivers
- ##### bsp/components
  - **24cxx**
    - Add null pointer check
  - **gt9xx**
    - Add null pointer check
  - **nt35510**
    - Add null pointer check
  - **tca9539**
    - Add null pointer check
  - **w25qxx**
    - Add null pointer check
- ##### bsp/ev_hc32f448_lqfp80
  - Add API BSP_XTAL32_Init()
  - Optimize function BSP_I2C_Init()
  - Update EXCLK clock frequency: 100MHz -> 50MHZ in function BSP_CLK_Init()
  - Add include file named hc32_ll_fcm.h and add declaration of BSP_XTAL32_Init()
  - Modify I2C baudrate: 400000 -> 100000
  - Modify the timing: EXCLK 100MHz -> 40MHz
- ##### cmsis/Device
  - Optimize TMR4_OCMRxx
  - Rename EMB_CTL1 register bit: SRAMERREN -> SRAMECCERREN
- ##### hc32_ll_driver
  - **adc**
    - Modify typo
    - API fixed: ADC_DeInit()
    - Add declaration of API ADC_MxChCmd(), ADC_ConvDataAverageMxChCmd(), and add defgroup ADC_Mx_Channel
    - Add declaration of API ADC_GetResolution()
    - Add API ADC_MxChCmd(),ADC_ConvDataAverageMxChCmd
    - Add API ADC_GetResolution()
  - **clk**
    - Modify comment
    - Refine API CLK_XtalStdInit. and add API CLK_XtalStdCmd, CLK_SetXtalStdExceptionType
    - Modify API CLK_Xtal32Cmd(), CLK_MrcCmd() and CLK_LrcCmd(), use DDL_DelayUS() to replace CLK_Delay()
  - **cmp**
    - Modify typo
  - **ctc**
    - Modify typo
  - **dac**
    - Refine data validation
    - Add assert for set DAC source and modify IS_AMP_CTRL_ALLOWED()
  - **dbgc**
    - Remove API DBGC_GetChipID()
    - Add macro definition DBGC_Trace_Mode
    - Add declaration of API DBGC_TraceIoCmd,DBGC_TraceModeConfig
    - Remove API DBGC_GetChipID()A
    - Add assert to DBGC_PeriphCmd & DBGC_Periph2Cmd
    - Add assert IS_DGBC_TRACE_MD and add API DBGC_TraceIoCmd,DBGC_TraceModeConfig
  - **dcu**
    - Modify typo
    - Modify function DCU_IntCmd() for misra
  - **dma**
    - Add API DMA_SetDataWidth()
    - Delete group DMA_AHB_HPROT_Config
    - Delete API DMA_AHB_HProtPrivilegeCmd()
    - Modify API input param type:u16->u32
    - Add structure stc_dma_rc_nonseq_init_t
    - Add API DMA_ReconfigNonSeqStructInit() & DMA_ReconfigNonSeqInit()
    - Optimize set blocksize & repeat count process
    - Add DMA Repeat size assert
    - Use macros replace immediate data, modify IS_DMA_NON_SEQ_TRANS_CNT
  - **efm**
    - Rename EFM_DataCacheResetCmd() as EFM_CacheRamReset() and modify comment
    - Optimized macro group EFM_Remap_Size definitions
    - Add structure of stc_efm_location_t and declaration of API EFM_GetWaferID(), EFM_GetLocation(), EFM_GetLotID()
    - Modify typo
    - Remove address assert from EFM_ReadByte()
    - Refine EFM_SequenceProgram() & EFM_ChipErase(), and put them in RAM
    - Add API EFM_GetWaferID(), EFM_GetLocation(), EFM_GetLotID()
    - Modify flash sector number defined and API EFM_SequenceSectorOperateCmd()
  - **emb**
    - Update EMB_CTL1_CMPEN0~3 to EMB_CTL1_CMPEN1~4
    - Add stc_emb_monitor_sys_t to combine osc, sram, lockup, lvd
    - Replace macro: EMB_CTL1_SRAMERREN -> EMB_CTL1_SRAMECCERREN
    - Add marco EMB_FLAG_CLR_ALL
    - Function EMB_TMR4_Init don't call EMB_DeInit
    - Function EMB_TMR6_Init don't call EMB_DeInit
    - Modify stc_emb_monitor_sys_t structure relevant code
    - Modify API EMB_ClearStatus assert
  - **gpio**
    - Modify GPIO_SetFunc()
    - Rename GPIO_ExIntCmd() as GPIO_ExtIntCmd
    - Optimize API: GPIO_Init(), GPIO_SetFunc(), GPIO_SubFuncCmd(), GPIO_InputMOSCmd(), GPIO_AnalogCmd(), GPIO_ExtIntCmd()
    - Add assert for GPIO register lock status in API GPIO_AnalogCmd(), GPIO_ExtIntCmd()
  - **i2c**
    - Move macro define I2C_SRC_CLK to head file and add marco I2C_WIDTH_MAX_IMME
    - Rename I2C_FIFO_FLAG_xx as I2C_FLAG_xx_FIFO_xx, I2C_INT_RFREQ as I2C_INT_RX_FIFO_REQ
    - Adjust I2C_FLAG_ALL & I2C_FLAG_CLR_ALL & I2C_INT_ALL
    - Add I2C_Flag_Clear def group
    - Remove API I2C_FIFO_ClearRequestStatus() & I2C_FIFO_GetStatus
    - Fix I2C_Deinit
    - Move macro define I2C_SRC_CLK to head file
    - Modify I2C_Restart()
    - Refine I2C Flag & API I2C_SlaveAddrConfig/I2C_SlaveMaskAddrConfig
  - **icg**
    - Modify macro defineICG_SWDT_LPM_CNT_CONTINUE -> ICG_SWDT_LPM_CNT_CONT
  - **interrupts**
    - Add declaration of API INTC_GetIntSrcState()
    - Remove space line
    - Add API INTC_GetIntSrcState()
  - **mcan**
    - Removed definitions related to BEC and BEU.
    - Optimized driver:
    - 1. Integrated stc_mcan_classic_config_t and stc_mcan_fd_config_t into stc_mcan_bit_time_config_t
    - 2. Integrated u32FdIso into u32FrameFormat.
    - 3. Removed API MCAN_SetFdIsoOperation(), added API MCAN_SetFrameFormat().
    - 4. Optimized the handling of the parameter stc_mcan_filter_t.u32FilterIndex
    - 5. Add 5 APIs for better get protocol status(register PSR):
    - MCAN_GetTdcValue(), MCAN_GetDataLastErrorCode(), MCAN_GetLastErrorCode(),
    - MCAN_GetComState(), MCAN_GetProtocolFlagStatus()
    - 6. Changed u8Activity of stc_mcan_protocol_status_t to u8ComState.
    - 7. Changed MCAN_Comm_State to MCAN_Com_State and optimized the macros definitions.
    - 8. Changed u8MsgStorageIndex of stc_mcan_hpm_status_t to u8MsgIndex. Optimized MCAN_HPM_Storage macros definitions.
    - 7. Changed u8MsgStorageIndex of stc_mcan_hpm_status_t to u8MsgIndex.
    - 8. Optimized local function MCAN_FilterInitConfig()
    - 9. When the frame to be transmitted is a remote frame, do not write the data field to the message RAM.
    - When the received frame is a remote frame, do not read the data field from the message RAM.
    - Optimized comments.
  - **mpu**
    - Add structure stc_mpu_unit_init_t, and declaration of MPU_UnitInit(), MPU_UnitStructInit()
    - Refine def group MPU_Flag
    - Optimize MPU_ClearStatus function
    - Add API MPU_UnitInit(), MPU_UnitStructInit()
  - **pwc**
    - Modify group PWC_Stop_Type
    - Add function PWC_LVD_DeInit
    - Modify the PWC_LVD_Detection_Voltage_Sel comment
    - Modify PWC_RAM_PD_CAN1 as PWC_RAM_PD_MCAN
    - Refine API PWC_SLEEP_Enter()
    - Remove redundant assert
    - Modify API PWC_PD_Enter() #use assert to replace the unlock, and add return value
    - Modify API PWC_WKT_SetCompareValue()
    - Refine PWC_SLEEP_Enter()
    - Add API PWC_PD_SetIoState() & PWC_PD_SetMode()
  - **qspi**
    - Optimize QSPI_ClearStatus function
  - **spi**
    - Rename SPI_FLAG_OVERLOAD as SPI_FLAG_OVERRUN, SPI_FLAG_UNDERLOAD as SPI_FLAG_UNDERRUN
    - Modify some assert
    - Rename some API SPI_xxxConfig as SPI_Setxxx
    - Add Send restriction in SPI_TxRx function
  - **sram**
    - Modify typo
    - Refine def group SRAM_ECC_Mode, and refine def group SRAM_Err_Mode as SRAM_Exception_Type
    - Remove wait cycle relevant code
    - API fixed: SRAM_ClearStatus()
    - Refine SRAM_SetEccMode, and refine SRAM_SetErrorMode() as SRAM_SetExceptionType
  - **swdt**
    - Modify macro define: SWDT_LPM_CNT_CONTINUE -> SWDT_LPM_CNT_CONT
    - Optimize SWDT_ClearStatus function timeout
  - **tmr6**
    - Modify macro define for group TMR6_Emb_Ch_Define
    - Modify for headfile update: CM_TMR6CR -> CM_TMR6_COMMON
    - Modify typo
  - **usart**
    - Remove u32StopBit param from stc_usart_smartcard_init_t structure
    - Add the declaration of API USART_GetFuncState()
    - Modify return type of function USART_DeInit()
    - Modify USART_SmartCard_Init() for stc_usart_smartcard_init_t has modified(u32StopBit has removed)
    - Fix bug: did not enable MP while USART_MultiProcessor_Init()
    - API refined: USART_SetBaudrate()
    - Add API USART_GetFuncState()
  - **utility**
    - Modify register USART DR to USART TDR
    - Prohibit DDL_DelayMS and DDL_DelayUS functions from being optimized
  - **wdt**
    - Modify macro define: WDT_LPM_CNT_CONTINUE -> WDT_LPM_CNT_CONT
    - Optimize WDT_ClearStatus function timeout
#### midwares
#### projects
- ##### ev_hc32f448_lqfp80/applications
  - **functional_safety/iec60730_class_b**
    - Initialize XTAL32 using BSP_XTAL32_Init
  - **iap/iap_boot**
    - Removed SRAM wait cycle relevant code
  - **iap/iap_ymodem_boot**
    - Removed SRAM wait cycle relevant code
- ##### ev_hc32f448_lqfp80/examples
  - **adc/adc_awd**
    - Set XTAL as system clock source
  - **adc/adc_base**
    - Set XTAL as system clock source
  - **adc/adc_buffer_mode**
    - Set XTAL as system clock source
  - **adc/adc_channel_remap**
    - Set XTAL as system clock source
  - **adc/adc_dma**
    - Set XTAL as system clock source
  - **adc/adc_hard_trigger**
    - Set XTAL as system clock source
  - **adc/adc_internal_analog_channel**
    - Set XTAL as system clock source
  - **adc/adc_over_sample**
    - Set XTAL as system clock source
  - **adc/adc_sync_mode**
    - Removed SRAM wait cycle relevant code
  - **aes/aes_base**
    - Set XTAL as system clock source
  - **clk/clk_switch_sysclk**
    - Modify XTAL32 initialize process
    - Removed SRAM wait cycle relevant code
  - **clk/clk_xtalstop_detect**
    - Use CLK_XtalStdInit() to replace XtalStopDetctInit()
    - Modify XTAL_STOP_IrqCallback
  - **ctc/ctc_ctcref_single_trimming**
    - Initialize XTAL32 using BSP_XTAL32_Init
  - **ctc/ctc_xtal32_trimming**
    - Initialize XTAL32 using BSP_XTAL32_Init
  - **dmac/dmac_base**
    - Optimize DMA2_Error_Handler()
  - **dmac/dmac_non_sequence**
    - Fixed bug #revert test code.
  - **efm/efm_chip_erase**
    - Fixed bug # release write protect before sector erase
  - **efm/efm_dbus**
    - Set API DBUS_Protect_test optimization level
  - **efm/efm_sequence_program**
    - Re-structure
  - **efm/efm_swap**
    - Use EFM_GetSwapStatus to judge
  - **emb/emb_cmp_brake_timer4**
    - Fix magic number
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_cmp_brake_timer6**
    - Fix magic number
  - **emb/emb_lockup_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
    - Optimize comments: HardFault_Generate and HardFault_Handler
  - **emb/emb_lockup_brake_timer6**
    - Optimize comments: HardFault_Generate and HardFault_Handler
  - **emb/emb_lvd_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_osc_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_port_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_pwm_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_sram_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
    - Optimize the 2nd data in SRAM_GenerateError()
  - **emb/emb_sram_brake_timer6**
    - Optimize the 2nd data in SRAM_GenerateError()
  - **emb/emb_sw_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **event_port/ep_inout**
    - Comment revise
  - **exmc/exmc_smc_lcd_nt35510**
    - Re-implement BSP_CLK_Init()
  - **exmc/exmc_smc_sram_is61lv6416**
    - Fix typos and modify file brief
    - Fix memory address printf value
    - Re-implement BSP_CLK_Init()
  - **exmc/exmc_smc_sram_is61lv6416_dma**
    - Add exmc_smc_sram_is61lv6416_dma example
  - **hash/hash_base**
    - Set XTAL as system clock source
  - **i2c/i2c_master_dma**
    - Add definition I2C_ADDR_MD as address condition select
    - Configure DMA interrupt disable in I2C_DMA_Initialize() function
  - **i2c/i2c_master_polling**
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_master_polling_fifo**
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_slave_dma**
    - Remove redundant process for slave address commands
    - Add definition I2C_ADDR_MD as address condition select
    - Configure DMA interrupt disable in I2C_DMA_Initialize() function
  - **i2c/i2c_slave_int**
    - Remove redundant process for slave address commands
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_slave_polling**
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_slave_polling_fifo**
    - Remove redundant process for slave address commands
    - Add definition I2C_ADDR_MD as address condition select
  - **icg/icg_wdt_interrupt_hw_startup**
    - Add delay before WDT_GetStatus function
  - **intc/intc_nmi_xtalstop**
    - optimize function NMI_Xtal_Init
  - **mcan/mcan_classical**
    - Updates related to MCAN driver optimization.
    - Peripheral SRAMC not used, removed related code.
    - Code and comments optimized.
  - **mcan/mcan_fd**
    - Updates related to MCAN driver optimization.
    - Peripheral SRAMC not used, removed related code.
    - Code and comments optimized.
  - **mcan/mcan_loopback**
    - Optimized the example.
  - **mpu/mpu_core_write_protect**
    - Fixed parameters error of Core_MPU_Region_Size
    - Modify trigger condition for RTC protection
    - Optimize RTC init sequence
  - **mpu/mpu_dma_write_protect**
    - Remove key jitter
  - **mpu/mpu_ip_read_protect**
    - Optimize RTC init sequence
  - **pwc/pwc_lpc**
    - Disable HRC when enter sleep mode
  - **pwc/pwc_stop_wake**
    - Delete redundant code
  - **qspi/qspi_base**
    - Add read function of direct communication mode
  - **rtc/rtc_alarm**
    - Optimize RTC init sequence
    - Replace XTAL32_ClkInit to BSP_XTAL32_Init
  - **rtc/rtc_calendar**
    - Optimize RTC init sequence
  - **rtc/rtc_calibration_output**
    - Optimize RTC init sequence
    - Replace XTAL32_ClkInit to BSP_XTAL32_Init
  - **rtc/rtc_low_power**
    - Optimize RTC init sequence
  - **sram/sram_error_check**
    - sample code changed according to driver change
  - **timer0/timer0_basetimer**
    - Replace XTAL32_Config to BSP_XTAL32_Init
  - **timer4/timer4_pwm_through**
    - Modify the initial configuration to achieve 0% or 100% duty cycle
  - **timer6/timer6_cmp_deadtime**
    - Remove redundant code
  - **timer6/timer6_cmp_sawtooth**
    - Remove redundant code
  - **timer6/timer6_cmp_sawtooth_dual_buf**
    - Remove redundant code
    - Modify compare register buffer initialization value
  - **timer6/timer6_cmp_triangular_buf**
    - Remove redundant code
    - Modify compare register buffer initialization value
  - **timer6/timer6_pwm_dynamic_dutycycle**
    - Add timer6_pwm_dynamic_dutycycle example
  - **timer6/timer6_valid_period**
    - Modify compare register buffer initialization value
  - **timera/timera_capture**
    - Set XTAL as system clock source
  - **timera/timera_compare_value_buffer**
    - Set XTAL as system clock source
  - **timera/timera_position_overflow_count**
    - Set XTAL as system clock source
  - **trng/trng_base**
    - TRNG_Handler add __DSB for Arm Errata 838869
    - Add TRNG_Cmd function
    - Set XTAL as system clock source
  - **usart/usart_clocksync_dma**
    - Fix bug: possible null pointer for ClockSync_DMAConfig parameter pstcHandle
  - **usart/usart_smartcard_atr**
    - Remove u32StopBit from stcSmartCardInit structure
  - **usart/usart_uart_dma**
    - Optimize function: USART_TxComplete_IrqCallback
  - **usart/usart_uart_multiprocessor**
    - Optimize the RX process
  - **wdt/wdt_interrupt_sw_startup**
    - Add delay before WDT_GetStatus function
#### utils
------
## V1.0.0  May 31, 2023
- Initial release.