2009-12-25 22:39:36 +08:00
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
// i2s.c - Driver for the I2S controller.
|
|
|
|
//
|
2010-11-26 08:42:21 +08:00
|
|
|
// Copyright (c) 2008-2010 Texas Instruments Incorporated. All rights reserved.
|
2009-12-25 22:39:36 +08:00
|
|
|
// Software License Agreement
|
|
|
|
//
|
2010-11-26 08:42:21 +08:00
|
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
|
|
// laws. You may not combine this software with "viral" open-source
|
|
|
|
// software in order to form a larger program.
|
2009-12-25 22:39:36 +08:00
|
|
|
//
|
2010-11-26 08:42:21 +08:00
|
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
2009-12-25 22:39:36 +08:00
|
|
|
//
|
2010-11-26 08:42:21 +08:00
|
|
|
// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
|
2009-12-25 22:39:36 +08:00
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! \addtogroup i2s_api
|
|
|
|
//! @{
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
|
|
|
|
#include "inc/hw_i2s.h"
|
|
|
|
#include "inc/hw_ints.h"
|
|
|
|
#include "inc/hw_memmap.h"
|
|
|
|
#include "inc/hw_types.h"
|
|
|
|
#include "driverlib/debug.h"
|
|
|
|
#include "driverlib/i2s.h"
|
|
|
|
#include "driverlib/interrupt.h"
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Enables the I2S transmit module for operation.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function enables the transmit module for operation. The module
|
|
|
|
//! should be enabled after configuration. When the module is disabled,
|
|
|
|
//! no data or clocks will be generated on the I2S signals.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxEnable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the tx FIFO service request.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXISM) = I2S_TXISM_FFM;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read-modify-write the enable bit.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_TXEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Disables the I2S transmit module for operation.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function disables the transmit module for operation. The module
|
|
|
|
//! should be disabled before configuration. When the module is disabled,
|
|
|
|
//! no data or clocks will be generated on the I2S signals.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxDisable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read-modify-write the enable bit.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) &= ~I2S_CFG_TXEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Writes data samples to the I2S transmit FIFO with blocking.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulData is the single or dual channel I2S data.
|
|
|
|
//!
|
|
|
|
//! This function writes a single channel sample or combined left-right
|
|
|
|
//! samples to the I2S transmit FIFO. The format of the sample is determined
|
|
|
|
//! by the configuration that was used with the function I2STxConfigSet().
|
|
|
|
//! If the transmit mode is I2S_MODE_DUAL_STEREO then the \e ulData parameter
|
|
|
|
//! contains either the left or right sample. The left and right sample
|
|
|
|
//! alternate with each write to the FIFO, left sample first. If the transmit
|
|
|
|
//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the
|
|
|
|
//! \e ulData parameter contains both the left and right samples. If the
|
|
|
|
//! transmit mode is I2S_MODE_SINGLE_MONO then the \e ulData parameter
|
|
|
|
//! contains the single channel sample.
|
|
|
|
//!
|
|
|
|
//! For the compact modes, both the left and right samples are written at
|
|
|
|
//! the same time. If 16-bit compact mode is used, then the least significant
|
|
|
|
//! 16 bits contain the left sample, and the most significant 16 bits contain
|
|
|
|
//! the right sample. If 8-bit compact mode is used, then the lower 8 bits
|
|
|
|
//! contain the left sample, and the next 8 bits contain the right sample,
|
|
|
|
//! with the upper 16 bits unused.
|
|
|
|
//!
|
|
|
|
//! If there is no room in the transmit FIFO, then this function will wait
|
|
|
|
//! in a polling loop until the data can be written.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxDataPut(unsigned long ulBase, unsigned long ulData)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Wait until there is space.
|
|
|
|
//
|
|
|
|
while(HWREG(ulBase + I2S_O_TXLEV) >= 16)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the data to the I2S.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFO) = ulData;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Writes data samples to the I2S transmit FIFO without blocking.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulData is the single or dual channel I2S data.
|
|
|
|
//!
|
|
|
|
//! This function writes a single channel sample or combined left-right
|
|
|
|
//! samples to the I2S transmit FIFO. The format of the sample is determined
|
|
|
|
//! by the configuration that was used with the function I2STxConfigSet().
|
|
|
|
//! If the transmit mode is I2S_MODE_DUAL_STEREO then the \e ulData parameter
|
|
|
|
//! contains either the left or right sample. The left and right sample
|
|
|
|
//! alternate with each write to the FIFO, left sample first. If the transmit
|
|
|
|
//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the
|
|
|
|
//! \e ulData parameter contains both the left and right samples. If the
|
|
|
|
//! transmit mode is I2S_MODE_SINGLE_MONO then the \e ulData parameter
|
|
|
|
//! contains the single channel sample.
|
|
|
|
//!
|
|
|
|
//! For the compact modes, both the left and right samples are written at
|
|
|
|
//! the same time. If 16-bit compact mode is used, then the least significant
|
|
|
|
//! 16 bits contain the left sample, and the most significant 16 bits contain
|
|
|
|
//! the right sample. If 8-bit compact mode is used, then the lower 8 bits
|
|
|
|
//! contain the left sample, and the next 8 bits contain the right sample,
|
|
|
|
//! with the upper 16 bits unused.
|
|
|
|
//!
|
|
|
|
//! If there is no room in the transmit FIFO, then this function will return
|
|
|
|
//! immediately without writing any data to the FIFO.
|
|
|
|
//!
|
|
|
|
//! \return The number of elements written to the I2S transmit FIFO (1 or 0).
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
long
|
|
|
|
I2STxDataPutNonBlocking(unsigned long ulBase, unsigned long ulData)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Check for space to write.
|
|
|
|
//
|
|
|
|
if(HWREG(ulBase + I2S_O_TXLEV) < 16)
|
|
|
|
{
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFO) = ulData;
|
|
|
|
return(1);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Configures the I2S transmit module.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulConfig is the logical OR of the configuration options.
|
|
|
|
//!
|
|
|
|
//! This function is used to configure the options for the I2S transmit
|
|
|
|
//! channel. The parameter \e ulConfig is the logical OR of the following
|
|
|
|
//! options:
|
|
|
|
//!
|
|
|
|
//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format,
|
|
|
|
//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or
|
|
|
|
//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format.
|
|
|
|
//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock.
|
|
|
|
//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or
|
|
|
|
//! \b I2S_CONFIG_MODE_MONO for single channel mono format.
|
|
|
|
//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether
|
|
|
|
//! the I2S transmitter is the clock master or slave.
|
|
|
|
//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per sample.
|
|
|
|
//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per word that are transferred on the data
|
|
|
|
//! line.
|
|
|
|
//! - \b I2S_CONFIG_EMPTY_ZERO or \b I2S_CONFIG_EMPTY_REPEAT to select whether
|
|
|
|
//! the module transmits zeroes or repeats the last sample when the FIFO is
|
|
|
|
//! empty.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxConfigSet(unsigned long ulBase, unsigned long ulConfig)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK |
|
|
|
|
I2S_CONFIG_EMPTY_MASK | I2S_CONFIG_CLK_MASK |
|
|
|
|
I2S_CONFIG_SAMPLE_SIZE_MASK |
|
|
|
|
I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Check to see if a compact mode is used.
|
|
|
|
//
|
|
|
|
if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// If compact 8 mode is used, then need to adjust some bits
|
|
|
|
// before writing the config register. Also set the FIFO
|
|
|
|
// config register for 8 bit compact samples.
|
|
|
|
//
|
|
|
|
ulConfig &= ~I2S_CONFIG_MODE_MONO;
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFOCFG) = I2S_TXFIFOCFG_CSS;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// If compact 8 mode is not used, then set the FIFO config
|
|
|
|
// register for 16 bit. This is okay if a compact mode is
|
|
|
|
// not used.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFOCFG) = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the configuration register. Since all the fields are
|
|
|
|
// specified by the configuration parameter, it is not necessary
|
|
|
|
// to do a read-modify-write.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXCFG) = ulConfig;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Sets the FIFO level at which a service request is generated.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulLevel is the FIFO service request limit.
|
|
|
|
//!
|
|
|
|
//! This function is used to set the transmit FIFO fullness level at which
|
|
|
|
//! a service request will occur. The service request is used to generate
|
|
|
|
//! an interrupt or a DMA transfer request. The transmit FIFO will
|
|
|
|
//! generate a service request when the number of items in the FIFO is
|
|
|
|
//! less than the level specified in the \e ulLevel parameter. For example,
|
|
|
|
//! if \e ulLevel is 8, then a service request will be generated when
|
|
|
|
//! there are less than 8 samples remaining in the transmit FIFO.
|
|
|
|
//!
|
|
|
|
//! For the purposes of counting the FIFO level, a left-right sample pair
|
|
|
|
//! counts as 2, whether the mode is dual or compact stereo. When mono
|
|
|
|
//! mode is used, internally the mono sample is still treated as a sample
|
|
|
|
//! pair, so a single mono sample counts as 2. Since the FIFO always deals
|
|
|
|
//! with sample pairs, the level must be an even number from 0 to 16. The
|
|
|
|
//! maximum value is 16, which will cause a service request when there
|
|
|
|
//! is any room in the FIFO. The minimum value is 0, which disables the
|
|
|
|
//! service request.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT(ulLevel <= 16);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the FIFO limit
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXLIMIT) = ulLevel;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Gets the current setting of the FIFO service request level.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function is used to get the value of the transmit FIFO service
|
|
|
|
//! request level. This value is set using the I2STxFIFOLimitSet()
|
|
|
|
//! function.
|
|
|
|
//!
|
|
|
|
//! \return Returns the current value of the FIFO service request limit.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
unsigned long
|
|
|
|
I2STxFIFOLimitGet(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read and return the FIFO limit
|
|
|
|
//
|
|
|
|
return(HWREG(ulBase + I2S_O_TXLIMIT));
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Gets the number of samples in the transmit FIFO.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function is used to get the number of samples in the transmit
|
|
|
|
//! FIFO. For the purposes of measuring the FIFO level, a left-right sample
|
|
|
|
//! pair counts as 2, whether the mode is dual or compact stereo. When mono
|
|
|
|
//! mode is used, internally the mono sample is still treated as a sample
|
|
|
|
//! pair, so a single mono sample counts as 2. Since the FIFO always deals
|
|
|
|
//! with sample pairs, normally the level will be an even number from 0 to
|
|
|
|
//! 16. If dual stereo mode is used and only the left sample has been
|
|
|
|
//! written without the matching right sample, then the FIFO level will be an
|
|
|
|
//! odd value. If the FIFO level is odd, it indicates a left-right sample
|
|
|
|
//! mismatch.
|
|
|
|
//!
|
|
|
|
//! \return Returns the number of samples in the transmit FIFO, which will
|
|
|
|
//! normally be an even number.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
unsigned long
|
|
|
|
I2STxFIFOLevelGet(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read and return the transmit FIFO level.
|
|
|
|
//
|
|
|
|
return(HWREG(ulBase + I2S_O_TXLEV));
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Enables the I2S receive module for operation.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function enables the receive module for operation. The module
|
|
|
|
//! should be enabled after configuration. When the module is disabled,
|
|
|
|
//! no data will be clocked in regardless of the signals on the I2S interface.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SRxEnable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the tx FIFO service request.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_RXISM) = I2S_RXISM_FFM;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read-modify-write the enable bit.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_RXEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Disables the I2S receive module for operation.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function disables the receive module for operation. The module
|
|
|
|
//! should be disabled before configuration. When the module is disabled,
|
|
|
|
//! no data will be clocked in regardless of the signals on the I2S interface.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SRxDisable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read-modify-write the enable bit.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) &= ~I2S_CFG_RXEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Reads data samples from the I2S receive FIFO with blocking.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param pulData points to storage for the returned I2S sample data.
|
|
|
|
//!
|
|
|
|
//! This function reads a single channel sample or combined left-right
|
|
|
|
//! samples from the I2S receive FIFO. The format of the sample is determined
|
|
|
|
//! by the configuration that was used with the function I2SRxConfigSet().
|
|
|
|
//! If the receive mode is I2S_MODE_DUAL_STEREO then the returned value
|
|
|
|
//! contains either the left or right sample. The left and right sample
|
|
|
|
//! alternate with each read from the FIFO, left sample first. If the receive
|
|
|
|
//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the
|
|
|
|
//! returned data contains both the left and right samples. If the
|
|
|
|
//! receive mode is I2S_MODE_SINGLE_MONO then the returned data
|
|
|
|
//! contains the single channel sample.
|
|
|
|
//!
|
|
|
|
//! For the compact modes, both the left and right samples are read at
|
|
|
|
//! the same time. If 16-bit compact mode is used, then the least significant
|
|
|
|
//! 16 bits contain the left sample, and the most significant 16 bits contain
|
|
|
|
//! the right sample. If 8-bit compact mode is used, then the lower 8 bits
|
|
|
|
//! contain the left sample, and the next 8 bits contain the right sample,
|
|
|
|
//! with the upper 16 bits unused.
|
|
|
|
//!
|
|
|
|
//! If there is no data in the receive FIFO, then this function will wait
|
|
|
|
//! in a polling loop until data is available.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SRxDataGet(unsigned long ulBase, unsigned long *pulData)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Wait until there is data available.
|
|
|
|
//
|
|
|
|
while(HWREG(ulBase + I2S_O_RXLEV) == 0)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read data from the I2S receive FIFO.
|
|
|
|
//
|
|
|
|
*pulData = HWREG(ulBase + I2S_O_RXFIFO);
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Reads data samples from the I2S receive FIFO without blocking.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param pulData points to storage for the returned I2S sample data.
|
|
|
|
//!
|
|
|
|
//! This function reads a single channel sample or combined left-right
|
|
|
|
//! samples from the I2S receive FIFO. The format of the sample is determined
|
|
|
|
//! by the configuration that was used with the function I2SRxConfigSet().
|
|
|
|
//! If the receive mode is I2S_MODE_DUAL_STEREO then the received data
|
|
|
|
//! contains either the left or right sample. The left and right sample
|
|
|
|
//! alternate with each read from the FIFO, left sample first. If the receive
|
|
|
|
//! mode is I2S_MODE_COMPACT_STEREO_16 or I2S_MODE_COMPACT_STEREO_8, then the
|
|
|
|
//! received data contains both the left and right samples. If the
|
|
|
|
//! receive mode is I2S_MODE_SINGLE_MONO then the received data
|
|
|
|
//! contains the single channel sample.
|
|
|
|
//!
|
|
|
|
//! For the compact modes, both the left and right samples are read at
|
|
|
|
//! the same time. If 16-bit compact mode is used, then the least significant
|
|
|
|
//! 16 bits contain the left sample, and the most significant 16 bits contain
|
|
|
|
//! the right sample. If 8-bit compact mode is used, then the lower 8 bits
|
|
|
|
//! contain the left sample, and the next 8 bits contain the right sample,
|
|
|
|
//! with the upper 16 bits unused.
|
|
|
|
//!
|
|
|
|
//! If there is no data in the receive FIFO, then this function will return
|
|
|
|
//! immediately without reading any data from the FIFO.
|
|
|
|
//!
|
|
|
|
//! \return The number of elements read from the I2S receive FIFO (1 or 0).
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
long
|
|
|
|
I2SRxDataGetNonBlocking(unsigned long ulBase, unsigned long *pulData)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Check for available samples.
|
|
|
|
//
|
|
|
|
if(HWREG(ulBase + I2S_O_RXLEV) != 0)
|
|
|
|
{
|
|
|
|
*pulData = HWREG(ulBase + I2S_O_RXFIFO);
|
|
|
|
return(1);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
return(0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Configures the I2S receive module.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulConfig is the logical OR of the configuration options.
|
|
|
|
//!
|
|
|
|
//! This function is used to configure the options for the I2S receive
|
|
|
|
//! channel. The parameter \e ulConfig is the logical OR of the following
|
|
|
|
//! options:
|
|
|
|
//!
|
|
|
|
//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format,
|
|
|
|
//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or
|
|
|
|
//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format.
|
|
|
|
//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock.
|
|
|
|
//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or
|
|
|
|
//! \b I2S_CONFIG_MODE_MONO for single channel mono format.
|
|
|
|
//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether
|
|
|
|
//! the I2S receiver is the clock master or slave.
|
|
|
|
//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per sample.
|
|
|
|
//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per word that are transferred on the data
|
|
|
|
//! line.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SRxConfigSet(unsigned long ulBase, unsigned long ulConfig)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK |
|
|
|
|
I2S_CONFIG_CLK_MASK | I2S_CONFIG_SAMPLE_SIZE_MASK |
|
|
|
|
I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Clear out any prior config of the RX FIFO config register.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) = 0;
|
|
|
|
|
|
|
|
//
|
|
|
|
// If mono mode is used, then the FMM bit needs to be set.
|
|
|
|
//
|
|
|
|
if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_MONO)
|
|
|
|
{
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_FMM;
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// If a compact mode is used, then the CSS bit needs to be set.
|
|
|
|
//
|
|
|
|
else if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8)
|
|
|
|
{
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_CSS;
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// The "mono" bits needs to be removed from the configuration word
|
|
|
|
// prior to writing to hardware, because the RX configuration register
|
|
|
|
// does not actually use these bits.
|
|
|
|
//
|
|
|
|
ulConfig &= ~I2S_CONFIG_MODE_MONO;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the configuration register. Since all the fields are
|
|
|
|
// specified by the configuration parameter, it is not necessary
|
|
|
|
// to do a read-modify-write.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_RXCFG) = ulConfig;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Sets the FIFO level at which a service request is generated.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulLevel is the FIFO service request limit.
|
|
|
|
//!
|
|
|
|
//! This function is used to set the receive FIFO fullness level at which
|
|
|
|
//! a service request will occur. The service request is used to generate
|
|
|
|
//! an interrupt or a DMA transfer request. The receive FIFO will
|
|
|
|
//! generate a service request when the number of items in the FIFO is
|
|
|
|
//! greater than the level specified in the \e ulLevel parameter. For example,
|
|
|
|
//! if \e ulLevel is 4, then a service request will be generated when
|
|
|
|
//! there are more than 4 samples available in the receive FIFO.
|
|
|
|
//!
|
|
|
|
//! For the purposes of counting the FIFO level, a left-right sample pair
|
|
|
|
//! counts as 2, whether the mode is dual or compact stereo. When mono
|
|
|
|
//! mode is used, internally the mono sample is still treated as a sample
|
|
|
|
//! pair, so a single mono sample counts as 2. Since the FIFO always deals
|
|
|
|
//! with sample pairs, the level must be an even number from 0 to 16. The
|
|
|
|
//! minimum value is 0, which will cause a service request when there
|
|
|
|
//! is any data available in the FIFO. The maximum value is 16, which
|
|
|
|
//! disables the service request (because there cannot be more than 16
|
|
|
|
//! items in the FIFO).
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SRxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT(ulLevel <= 16);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the FIFO limit
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_RXLIMIT) = ulLevel;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Gets the current setting of the FIFO service request level.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function is used to get the value of the receive FIFO service
|
|
|
|
//! request level. This value is set using the I2SRxFIFOLimitSet()
|
|
|
|
//! function.
|
|
|
|
//!
|
|
|
|
//! \return Returns the current value of the FIFO service request limit.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
unsigned long
|
|
|
|
I2SRxFIFOLimitGet(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read and return the FIFO limit. The lower bit is masked
|
|
|
|
// because it always reads as 1, and has no meaning.
|
|
|
|
//
|
|
|
|
return(HWREG(ulBase + I2S_O_RXLIMIT) & 0xFFFE);
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Gets the number of samples in the receive FIFO.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function is used to get the number of samples in the receive
|
|
|
|
//! FIFO. For the purposes of measuring the FIFO level, a left-right sample
|
|
|
|
//! pair counts as 2, whether the mode is dual or compact stereo. When mono
|
|
|
|
//! mode is used, internally the mono sample is still treated as a sample
|
|
|
|
//! pair, so a single mono sample counts as 2. Since the FIFO always deals
|
|
|
|
//! with sample pairs, normally the level will be an even number from 0 to
|
|
|
|
//! 16. If dual stereo mode is used and only the left sample has been
|
|
|
|
//! read without reading the matching right sample, then the FIFO level will
|
|
|
|
//! be an odd value. If the FIFO level is odd, it indicates a left-right
|
|
|
|
//! sample mismatch.
|
|
|
|
//!
|
|
|
|
//! \return Returns the number of samples in the transmit FIFO, which will
|
|
|
|
//! normally be an even number.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
unsigned long
|
|
|
|
I2SRxFIFOLevelGet(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Read and return the receive FIFO level.
|
|
|
|
//
|
|
|
|
return(HWREG(ulBase + I2S_O_RXLEV));
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Enables the I2S transmit and receive modules for operation.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function simultaneously enables the transmit and receive modules for
|
|
|
|
//! operation, providing a synchronized SCLK and LRCLK. The module should be
|
|
|
|
//! enabled after configuration. When the module is disabled, no data or
|
|
|
|
//! clocks will be generated on the I2S signals.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxRxEnable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the Tx FIFO service request.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXISM) = I2S_TXISM_FFM;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the Rx FIFO service request.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_RXISM) = I2S_RXISM_FFM;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the transmit and receive modules.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) |= I2S_CFG_TXEN | I2S_CFG_RXEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Disables the I2S transmit and receive modules.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function simultaneously disables the transmit and receive modules.
|
|
|
|
//! When the module is disabled, no data or clocks will be generated on the I2S
|
|
|
|
//! signals.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxRxDisable(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Disable the transmit and receive modules.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_CFG) &= ~(I2S_CFG_TXEN | I2S_CFG_RXEN);
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Configures the I2S transmit and receive modules.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulConfig is the logical OR of the configuration options.
|
|
|
|
//!
|
|
|
|
//! This function is used to configure the options for the I2S transmit and
|
|
|
|
//! receive channels with identical parameters. The parameter \e ulConfig is
|
|
|
|
//! the logical OR of the following options:
|
|
|
|
//!
|
|
|
|
//! - \b I2S_CONFIG_FORMAT_I2S for standard I2S format,
|
|
|
|
//! \b I2S_CONFIG_FORMAT_LEFT_JUST for left justified format, or
|
|
|
|
//! \b I2S_CONFIG_FORMAT_RIGHT_JUST for right justified format.
|
|
|
|
//! - \b I2S_CONFIG_SCLK_INVERT to invert the polarity of the serial bit clock.
|
|
|
|
//! - \b I2S_CONFIG_MODE_DUAL for dual channel stereo,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_16 for 16-bit compact stereo mode,
|
|
|
|
//! \b I2S_CONFIG_MODE_COMPACT_8 for 8-bit compact stereo mode, or
|
|
|
|
//! \b I2S_CONFIG_MODE_MONO for single channel mono format.
|
|
|
|
//! - \b I2S_CONFIG_CLK_MASTER or \b I2S_CONFIG_CLK_SLAVE to select whether
|
|
|
|
//! the I2S transmitter is the clock master or slave.
|
|
|
|
//! - \b I2S_CONFIG_SAMPLE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per sample.
|
|
|
|
//! - \b I2S_CONFIG_WIRE_SIZE_32, \b _24, \b _20, \b _16, or \b _8
|
|
|
|
//! to select the number of bits per word that are transferred on the data
|
|
|
|
//! line.
|
|
|
|
//! - \b I2S_CONFIG_EMPTY_ZERO or \b I2S_CONFIG_EMPTY_REPEAT to select whether
|
|
|
|
//! the module transmits zeroes or repeats the last sample when the FIFO is
|
|
|
|
//! empty.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2STxRxConfigSet(unsigned long ulBase, unsigned long ulConfig)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulConfig & (I2S_CONFIG_FORMAT_MASK | I2S_CONFIG_MODE_MASK |
|
|
|
|
I2S_CONFIG_EMPTY_MASK | I2S_CONFIG_CLK_MASK |
|
|
|
|
I2S_CONFIG_SAMPLE_SIZE_MASK |
|
|
|
|
I2S_CONFIG_WIRE_SIZE_MASK)) == ulConfig);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Clear out any prior configuration of the FIFO config registers.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFOCFG) = 0;
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) = 0;
|
|
|
|
|
|
|
|
//
|
|
|
|
// If mono mode is used, then the FMM bit needs to be set.
|
|
|
|
//
|
|
|
|
if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_MONO)
|
|
|
|
{
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_FMM;
|
|
|
|
ulConfig &= ~(I2S_CONFIG_MODE_MONO);
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// If a compact mode is used, then the CSS bit needs to be set.
|
|
|
|
//
|
|
|
|
if((ulConfig & I2S_CONFIG_MODE_MASK) == I2S_CONFIG_MODE_COMPACT_8)
|
|
|
|
{
|
|
|
|
HWREG(ulBase + I2S_O_TXFIFOCFG) |= I2S_TXFIFOCFG_CSS;
|
|
|
|
HWREG(ulBase + I2S_O_RXFIFOCFG) |= I2S_RXFIFOCFG_CSS;
|
|
|
|
}
|
|
|
|
|
|
|
|
//
|
|
|
|
// Write the configuration register. Since all the fields are specified by
|
|
|
|
// the configuration parameter, it is not necessary to do a
|
|
|
|
// read-modify-write.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_TXCFG) = ulConfig;
|
|
|
|
HWREG(ulBase + I2S_O_RXCFG) = ulConfig;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Selects the source of the master clock, internal or external.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulMClock is the logical OR of the master clock configuration
|
|
|
|
//! choices.
|
|
|
|
//!
|
|
|
|
//! This function selects whether the master clock is sourced from the device
|
|
|
|
//! internal PLL, or comes from an external pin. The I2S serial bit clock
|
|
|
|
//! (SCLK) and left-right word clock (LRCLK) are derived from the I2S master
|
|
|
|
//! clock. The transmit and receive modules can be configured independently.
|
|
|
|
//! The \e ulMClock parameter is chosen from the following:
|
|
|
|
//!
|
|
|
|
//! - one of \b I2S_TX_MCLK_EXT or \b I2S_TX_MCLK_INT
|
|
|
|
//! - one of \b I2S_RX_MCLK_EXT or \b I2S_RX_MCLK_INT
|
|
|
|
//!
|
|
|
|
//! \return Returns None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SMasterClockSelect(unsigned long ulBase, unsigned long ulMClock)
|
|
|
|
{
|
|
|
|
unsigned long ulConfig;
|
|
|
|
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulMClock & (I2S_TX_MCLK_EXT | I2S_RX_MCLK_EXT)) == ulMClock);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Set the clock selection bits in the configuation word.
|
|
|
|
//
|
|
|
|
ulConfig = HWREG(ulBase + I2S_O_CFG) &
|
|
|
|
~(I2S_TX_MCLK_EXT | I2S_RX_MCLK_EXT);
|
|
|
|
HWREG(ulBase + I2S_O_CFG) = ulConfig | ulMClock;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Enables I2S interrupt sources.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled.
|
|
|
|
//!
|
|
|
|
//! This function enables the specified I2S sources to generate interrupts.
|
|
|
|
//! The \e ulIntFlags parameter can be the logical OR of any of the following
|
|
|
|
//! values:
|
|
|
|
//!
|
|
|
|
//! - \b I2S_INT_RXERR for receive errors
|
|
|
|
//! - \b I2S_INT_RXREQ for receive FIFO service requests
|
|
|
|
//! - \b I2S_INT_TXERR for transmit errors
|
|
|
|
//! - \b I2S_INT_TXREQ for transmit FIFO service requests
|
|
|
|
//!
|
|
|
|
//! \return Returns None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ |
|
|
|
|
I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the specified interrupts.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_IM) |= ulIntFlags;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Disables I2S interrupt sources.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled.
|
|
|
|
//!
|
|
|
|
//! This function disables the specified I2S sources for interrupt
|
|
|
|
//! generation. The \e ulIntFlags parameter can be the logical OR
|
|
|
|
//! of any of the following values: \b I2S_INT_RXERR, \b I2S_INT_RXREQ,
|
|
|
|
//! \b I2S_INT_TXERR, or \b I2S_INT_TXREQ.
|
|
|
|
//!
|
|
|
|
//! \return Returns None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ |
|
|
|
|
I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the specified interrupts.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_IM) &= ~ulIntFlags;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Gets the I2S interrupt status.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param bMasked is set \b true to get the masked interrupt status, or
|
|
|
|
//! \b false to get the raw interrupt status.
|
|
|
|
//!
|
|
|
|
//! This function returns the I2S interrupt status. It can return either
|
|
|
|
//! the raw or masked interrupt status.
|
|
|
|
//!
|
|
|
|
//! \return Returns the masked or raw I2S interrupt status, as a bit field
|
|
|
|
//! of any of the following values: \b I2S_INT_RXERR, \b I2S_INT_RXREQ,
|
|
|
|
//! \b I2S_INT_TXERR, or \b I2S_INT_TXREQ
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
unsigned long
|
|
|
|
I2SIntStatus(unsigned long ulBase, tBoolean bMasked)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
|
|
// requested.
|
|
|
|
//
|
|
|
|
if(bMasked)
|
|
|
|
{
|
|
|
|
return(HWREG(ulBase + I2S_O_MIS));
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
return(HWREG(ulBase + I2S_O_RIS));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Clears pending I2S interrupt sources.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be cleared.
|
|
|
|
//!
|
|
|
|
//! This function clears the specified pending I2S interrupts. This must
|
|
|
|
//! be done in the interrupt handler to keep the handler from being called
|
|
|
|
//! again immediately upon exit. The \e ulIntFlags parameter can be the
|
|
|
|
//! logical OR of any of the following values: \b I2S_INT_RXERR,
|
|
|
|
//! \b I2S_INT_RXREQ, \b I2S_INT_TXERR, or \b I2S_INT_TXREQ.
|
|
|
|
//!
|
|
|
|
//! \note Since there is a write buffer in the Cortex-M3 processor, it may take
|
|
|
|
//! several clock cycles before the interrupt source is actually cleared.
|
|
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
|
|
//! being immediately reentered (since NVIC still sees the interrupt source
|
|
|
|
//! asserted).
|
|
|
|
//!
|
|
|
|
//! \return Returns None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT((ulIntFlags & (I2S_INT_RXERR | I2S_INT_RXREQ |
|
|
|
|
I2S_INT_TXERR | I2S_INT_TXREQ)) == ulIntFlags);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Clear the requested interrupt sources.
|
|
|
|
//
|
|
|
|
HWREG(ulBase + I2S_O_IC) = ulIntFlags;
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Registers an interrupt handler for the I2S controller.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
|
|
//! interrupt is activated.
|
|
|
|
//!
|
|
|
|
//! This sets and enables the handler to be called when the I2S controller
|
|
|
|
//! generates an interrupt. Specific I2S interrupts must still be enabled
|
|
|
|
//! with the I2SIntEnable() function. It is the responsibility of the
|
|
|
|
//! interrupt handler to clear any pending interrupts with I2SIntClear().
|
|
|
|
//!
|
|
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
|
|
//! handlers.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
ASSERT(pfnHandler);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Register the interrupt handler.
|
|
|
|
//
|
|
|
|
IntRegister(INT_I2S0, pfnHandler);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Enable the I2S interface interrupt.
|
|
|
|
//
|
|
|
|
IntEnable(INT_I2S0);
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
//! Unregisters an interrupt handler for the I2S controller.
|
|
|
|
//!
|
|
|
|
//! \param ulBase is the I2S module base address.
|
|
|
|
//!
|
|
|
|
//! This function will disable and clear the handler to be called when the
|
|
|
|
//! I2S interrupt occurs.
|
|
|
|
//!
|
|
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
|
|
//! handlers.
|
|
|
|
//!
|
|
|
|
//! \return None.
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|
|
|
|
void
|
|
|
|
I2SIntUnregister(unsigned long ulBase)
|
|
|
|
{
|
|
|
|
//
|
|
|
|
// Check the arguments.
|
|
|
|
//
|
|
|
|
ASSERT(ulBase == I2S0_BASE);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Disable the I2S interface interrupt.
|
|
|
|
//
|
|
|
|
IntDisable(INT_I2S0);
|
|
|
|
|
|
|
|
//
|
|
|
|
// Unregister the interrupt handler.
|
|
|
|
//
|
|
|
|
IntUnregister(INT_I2S0);
|
|
|
|
}
|
|
|
|
|
|
|
|
//*****************************************************************************
|
|
|
|
//
|
|
|
|
// Close the Doxygen group.
|
|
|
|
//! @}
|
|
|
|
//
|
|
|
|
//*****************************************************************************
|