rt-thread-official/bsp/nuvoton/libraries/m480/StdDriver/inc/nu_hsotg.h

269 lines
11 KiB
C
Raw Normal View History

/**************************************************************************//**
* @file nu_hsotg.h
* @version V0.10
* @brief M480 Series HSOTG Driver Header File
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
******************************************************************************/
#ifndef __NU_HSOTG_H__
#define __NU_HSOTG_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup HSOTG_Driver HSOTG Driver
@{
*/
/** @addtogroup HSOTG_EXPORTED_CONSTANTS HSOTG Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* HSOTG constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define HSOTG_VBUS_EN_ACTIVE_HIGH (0UL) /*!< USB VBUS power switch enable signal is active high. \hideinitializer */
#define HSOTG_VBUS_EN_ACTIVE_LOW (1UL) /*!< USB VBUS power switch enable signal is active low. \hideinitializer */
#define HSOTG_VBUS_ST_VALID_HIGH (0UL) /*!< USB VBUS power switch valid status is high. \hideinitializer */
#define HSOTG_VBUS_ST_VALID_LOW (1UL) /*!< USB VBUS power switch valid status is low. \hideinitializer */
/*@}*/ /* end of group HSOTG_EXPORTED_CONSTANTS */
/** @addtogroup HSOTG_EXPORTED_FUNCTIONS HSOTG Exported Functions
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* Define Macros and functions */
/*---------------------------------------------------------------------------------------------------------*/
/**
* @brief This macro is used to enable HSOTG function
* @param None
* @return None
* @details This macro will set OTGEN bit of HSOTG_CTL register to enable HSOTG function.
* \hideinitializer
*/
#define HSOTG_ENABLE() (HSOTG->CTL |= HSOTG_CTL_OTGEN_Msk)
/**
* @brief This macro is used to disable HSOTG function
* @param None
* @return None
* @details This macro will clear OTGEN bit of HSOTG_CTL register to disable HSOTG function.
* \hideinitializer
*/
#define HSOTG_DISABLE() (HSOTG->CTL &= ~HSOTG_CTL_OTGEN_Msk)
/**
* @brief This macro is used to enable USB PHY
* @param None
* @return None
* @details When the USB role is selected as HSOTG device, use this macro to enable USB PHY.
* This macro will set OTGPHYEN bit of HSOTG_PHYCTL register to enable USB PHY.
* \hideinitializer
*/
#define HSOTG_ENABLE_PHY() (HSOTG->PHYCTL |= HSOTG_PHYCTL_OTGPHYEN_Msk)
/**
* @brief This macro is used to disable USB PHY
* @param None
* @return None
* @details This macro will clear OTGPHYEN bit of HSOTG_PHYCTL register to disable USB PHY.
* \hideinitializer
*/
#define HSOTG_DISABLE_PHY() (HSOTG->PHYCTL &= ~HSOTG_PHYCTL_OTGPHYEN_Msk)
/**
* @brief This macro is used to enable ID detection function
* @param None
* @return None
* @details This macro will set IDDETEN bit of HSOTG_PHYCTL register to enable ID detection function.
* \hideinitializer
*/
#define HSOTG_ENABLE_ID_DETECT() (HSOTG->PHYCTL |= HSOTG_PHYCTL_IDDETEN_Msk)
/**
* @brief This macro is used to disable ID detection function
* @param None
* @return None
* @details This macro will clear IDDETEN bit of HSOTG_PHYCTL register to disable ID detection function.
* \hideinitializer
*/
#define HSOTG_DISABLE_ID_DETECT() (HSOTG->PHYCTL &= ~HSOTG_PHYCTL_IDDETEN_Msk)
/**
* @brief This macro is used to enable HSOTG wake-up function
* @param None
* @return None
* @details This macro will set WKEN bit of HSOTG_CTL register to enable HSOTG wake-up function.
* \hideinitializer
*/
#define HSOTG_ENABLE_WAKEUP() (HSOTG->CTL |= HSOTG_CTL_WKEN_Msk)
/**
* @brief This macro is used to disable HSOTG wake-up function
* @param None
* @return None
* @details This macro will clear WKEN bit of HSOTG_CTL register to disable HSOTG wake-up function.
* \hideinitializer
*/
#define HSOTG_DISABLE_WAKEUP() (HSOTG->CTL &= ~HSOTG_CTL_WKEN_Msk)
/**
* @brief This macro is used to set the polarity of USB_VBUS_EN pin
* @param[in] u32Pol The polarity selection. Valid values are listed below.
* - \ref HSOTG_VBUS_EN_ACTIVE_HIGH
* - \ref HSOTG_VBUS_EN_ACTIVE_LOW
* @return None
* @details This macro is used to set the polarity of external USB VBUS power switch enable signal.
* \hideinitializer
*/
#define HSOTG_SET_VBUS_EN_POL(u32Pol) (HSOTG->PHYCTL = (HSOTG->PHYCTL & (~HSOTG_PHYCTL_VBENPOL_Msk)) | ((u32Pol)<<HSOTG_PHYCTL_VBENPOL_Pos))
/**
* @brief This macro is used to set the polarity of USB_VBUS_ST pin
* @param[in] u32Pol The polarity selection. Valid values are listed below.
* - \ref HSOTG_VBUS_ST_VALID_HIGH
* - \ref HSOTG_VBUS_ST_VALID_LOW
* @return None
* @details This macro is used to set the polarity of external USB VBUS power switch status signal.
* \hideinitializer
*/
#define HSOTG_SET_VBUS_STS_POL(u32Pol) (HSOTG->PHYCTL = (HSOTG->PHYCTL & (~HSOTG_PHYCTL_VBSTSPOL_Msk)) | ((u32Pol)<<HSOTG_PHYCTL_VBSTSPOL_Pos))
/**
* @brief This macro is used to enable HSOTG related interrupts
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref HSOTG_INTEN_ROLECHGIEN_Msk
* - \ref HSOTG_INTEN_VBEIEN_Msk
* - \ref HSOTG_INTEN_SRPFIEN_Msk
* - \ref HSOTG_INTEN_HNPFIEN_Msk
* - \ref HSOTG_INTEN_GOIDLEIEN_Msk
* - \ref HSOTG_INTEN_IDCHGIEN_Msk
* - \ref HSOTG_INTEN_PDEVIEN_Msk
* - \ref HSOTG_INTEN_HOSTIEN_Msk
* - \ref HSOTG_INTEN_BVLDCHGIEN_Msk
* - \ref HSOTG_INTEN_AVLDCHGIEN_Msk
* - \ref HSOTG_INTEN_VBCHGIEN_Msk
* - \ref HSOTG_INTEN_SECHGIEN_Msk
* - \ref HSOTG_INTEN_SRPDETIEN_Msk
* @return None
* @details This macro will enable HSOTG related interrupts specified by u32Mask parameter.
* \hideinitializer
*/
#define HSOTG_ENABLE_INT(u32Mask) (HSOTG->INTEN |= (u32Mask))
/**
* @brief This macro is used to disable HSOTG related interrupts
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref HSOTG_INTEN_ROLECHGIEN_Msk
* - \ref HSOTG_INTEN_VBEIEN_Msk
* - \ref HSOTG_INTEN_SRPFIEN_Msk
* - \ref HSOTG_INTEN_HNPFIEN_Msk
* - \ref HSOTG_INTEN_GOIDLEIEN_Msk
* - \ref HSOTG_INTEN_IDCHGIEN_Msk
* - \ref HSOTG_INTEN_PDEVIEN_Msk
* - \ref HSOTG_INTEN_HOSTIEN_Msk
* - \ref HSOTG_INTEN_BVLDCHGIEN_Msk
* - \ref HSOTG_INTEN_AVLDCHGIEN_Msk
* - \ref HSOTG_INTEN_VBCHGIEN_Msk
* - \ref HSOTG_INTEN_SECHGIEN_Msk
* - \ref HSOTG_INTEN_SRPDETIEN_Msk
* @return None
* @details This macro will disable HSOTG related interrupts specified by u32Mask parameter.
* \hideinitializer
*/
#define HSOTG_DISABLE_INT(u32Mask) (HSOTG->INTEN &= ~(u32Mask))
/**
* @brief This macro is used to get HSOTG related interrupt flags
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref HSOTG_INTSTS_ROLECHGIF_Msk
* - \ref HSOTG_INTSTS_VBEIF_Msk
* - \ref HSOTG_INTSTS_SRPFIF_Msk
* - \ref HSOTG_INTSTS_HNPFIF_Msk
* - \ref HSOTG_INTSTS_GOIDLEIF_Msk
* - \ref HSOTG_INTSTS_IDCHGIF_Msk
* - \ref HSOTG_INTSTS_PDEVIF_Msk
* - \ref HSOTG_INTSTS_HOSTIF_Msk
* - \ref HSOTG_INTSTS_BVLDCHGIF_Msk
* - \ref HSOTG_INTSTS_AVLDCHGIF_Msk
* - \ref HSOTG_INTSTS_VBCHGIF_Msk
* - \ref HSOTG_INTSTS_SECHGIF_Msk
* - \ref HSOTG_INTSTS_SRPDETIF_Msk
* @return Interrupt flags of selected sources.
* @details This macro will return HSOTG related interrupt flags specified by u32Mask parameter.
* \hideinitializer
*/
#define HSOTG_GET_INT_FLAG(u32Mask) (HSOTG->INTSTS & (u32Mask))
/**
* @brief This macro is used to clear HSOTG related interrupt flags
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref HSOTG_INTSTS_ROLECHGIF_Msk
* - \ref HSOTG_INTSTS_VBEIF_Msk
* - \ref HSOTG_INTSTS_SRPFIF_Msk
* - \ref HSOTG_INTSTS_HNPFIF_Msk
* - \ref HSOTG_INTSTS_GOIDLEIF_Msk
* - \ref HSOTG_INTSTS_IDCHGIF_Msk
* - \ref HSOTG_INTSTS_PDEVIF_Msk
* - \ref HSOTG_INTSTS_HOSTIF_Msk
* - \ref HSOTG_INTSTS_BVLDCHGIF_Msk
* - \ref HSOTG_INTSTS_AVLDCHGIF_Msk
* - \ref HSOTG_INTSTS_VBCHGIF_Msk
* - \ref HSOTG_INTSTS_SECHGIF_Msk
* - \ref HSOTG_INTSTS_SRPDETIF_Msk
* @return None
* @details This macro will clear HSOTG related interrupt flags specified by u32Mask parameter.
* \hideinitializer
*/
#define HSOTG_CLR_INT_FLAG(u32Mask) (HSOTG->INTSTS = (u32Mask))
/**
* @brief This macro is used to get HSOTG related status
* @param[in] u32Mask The combination of user specified source. Valid values are listed below.
* - \ref HSOTG_STATUS_OVERCUR_Msk
* - \ref HSOTG_STATUS_IDSTS_Msk
* - \ref HSOTG_STATUS_SESSEND_Msk
* - \ref HSOTG_STATUS_BVLD_Msk
* - \ref HSOTG_STATUS_AVLD_Msk
* - \ref HSOTG_STATUS_VBUSVLD_Msk
* @return The user specified status.
* @details This macro will return HSOTG related status specified by u32Mask parameter.
* \hideinitializer
*/
#define HSOTG_GET_STATUS(u32Mask) (HSOTG->STATUS & (u32Mask))
/*@}*/ /* end of group HSOTG_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group HSOTG_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_HSOTG_H__ */
/*** (C) COPYRIGHT 2017 Nuvoton Technology Corp. ***/