rt-thread-official/bsp/gd32e230k-start/Libraries/GD32E230_standard_peripheral/Include/gd32e230_gpio.h

389 lines
26 KiB
C
Raw Normal View History

/*!
\file gd32e230_gpio.h
\brief definitions for the GPIO
\version 2018-06-19, V1.0.0, firmware for GD32E230
*/
/*
Copyright (c) 2018, GigaDevice Semiconductor Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef GD32E230_GPIO_H
#define GD32E230_GPIO_H
#include "gd32e230.h"
/* GPIOx(x=A,B,C,F) definitions */
#define GPIOA (GPIO_BASE + 0x00000000U)
#define GPIOB (GPIO_BASE + 0x00000400U)
#define GPIOC (GPIO_BASE + 0x00000800U)
#define GPIOF (GPIO_BASE + 0x00001400U)
/* registers definitions */
#define GPIO_CTL(gpiox) REG32((gpiox) + 0x00U) /*!< GPIO port control register */
#define GPIO_OMODE(gpiox) REG32((gpiox) + 0x04U) /*!< GPIO port output mode register */
#define GPIO_OSPD(gpiox) REG32((gpiox) + 0x08U) /*!< GPIO port output speed register */
#define GPIO_PUD(gpiox) REG32((gpiox) + 0x0CU) /*!< GPIO port pull-up/pull-down register */
#define GPIO_ISTAT(gpiox) REG32((gpiox) + 0x10U) /*!< GPIO port input status register */
#define GPIO_OCTL(gpiox) REG32((gpiox) + 0x14U) /*!< GPIO port output control register */
#define GPIO_BOP(gpiox) REG32((gpiox) + 0x18U) /*!< GPIO port bit operation register */
#define GPIO_LOCK(gpiox) REG32((gpiox) + 0x1CU) /*!< GPIO port configuration lock register */
#define GPIO_AFSEL0(gpiox) REG32((gpiox) + 0x20U) /*!< GPIO alternate function selected register 0 */
#define GPIO_AFSEL1(gpiox) REG32((gpiox) + 0x24U) /*!< GPIO alternate function selected register 1 */
#define GPIO_BC(gpiox) REG32((gpiox) + 0x28U) /*!< GPIO bit clear register */
#define GPIO_TG(gpiox) REG32((gpiox) + 0x2CU) /*!< GPIO port bit toggle register */
/* bits definitions */
/* GPIO_CTL */
#define GPIO_CTL_CTL0 BITS(0,1) /*!< pin 0 configuration bits */
#define GPIO_CTL_CTL1 BITS(2,3) /*!< pin 1 configuration bits */
#define GPIO_CTL_CTL2 BITS(4,5) /*!< pin 2 configuration bits */
#define GPIO_CTL_CTL3 BITS(6,7) /*!< pin 3 configuration bits */
#define GPIO_CTL_CTL4 BITS(8,9) /*!< pin 4 configuration bits */
#define GPIO_CTL_CTL5 BITS(10,11) /*!< pin 5 configuration bits */
#define GPIO_CTL_CTL6 BITS(12,13) /*!< pin 6 configuration bits */
#define GPIO_CTL_CTL7 BITS(14,15) /*!< pin 7 configuration bits */
#define GPIO_CTL_CTL8 BITS(16,17) /*!< pin 8 configuration bits */
#define GPIO_CTL_CTL9 BITS(18,19) /*!< pin 9 configuration bits */
#define GPIO_CTL_CTL10 BITS(20,21) /*!< pin 10 configuration bits */
#define GPIO_CTL_CTL11 BITS(22,23) /*!< pin 11 configuration bits */
#define GPIO_CTL_CTL12 BITS(24,25) /*!< pin 12 configuration bits */
#define GPIO_CTL_CTL13 BITS(26,27) /*!< pin 13 configuration bits */
#define GPIO_CTL_CTL14 BITS(28,29) /*!< pin 14 configuration bits */
#define GPIO_CTL_CTL15 BITS(30,31) /*!< pin 15 configuration bits */
/* GPIO_OMODE */
#define GPIO_OMODE_OM0 BIT(0) /*!< pin 0 output mode bit */
#define GPIO_OMODE_OM1 BIT(1) /*!< pin 1 output mode bit */
#define GPIO_OMODE_OM2 BIT(2) /*!< pin 2 output mode bit */
#define GPIO_OMODE_OM3 BIT(3) /*!< pin 3 output mode bit */
#define GPIO_OMODE_OM4 BIT(4) /*!< pin 4 output mode bit */
#define GPIO_OMODE_OM5 BIT(5) /*!< pin 5 output mode bit */
#define GPIO_OMODE_OM6 BIT(6) /*!< pin 6 output mode bit */
#define GPIO_OMODE_OM7 BIT(7) /*!< pin 7 output mode bit */
#define GPIO_OMODE_OM8 BIT(8) /*!< pin 8 output mode bit */
#define GPIO_OMODE_OM9 BIT(9) /*!< pin 9 output mode bit */
#define GPIO_OMODE_OM10 BIT(10) /*!< pin 10 output mode bit */
#define GPIO_OMODE_OM11 BIT(11) /*!< pin 11 output mode bit */
#define GPIO_OMODE_OM12 BIT(12) /*!< pin 12 output mode bit */
#define GPIO_OMODE_OM13 BIT(13) /*!< pin 13 output mode bit */
#define GPIO_OMODE_OM14 BIT(14) /*!< pin 14 output mode bit */
#define GPIO_OMODE_OM15 BIT(15) /*!< pin 15 output mode bit */
/* GPIO_OSPD */
#define GPIO_OSPD_OSPD0 BITS(0,1) /*!< pin 0 output max speed bits */
#define GPIO_OSPD_OSPD1 BITS(2,3) /*!< pin 1 output max speed bits */
#define GPIO_OSPD_OSPD2 BITS(4,5) /*!< pin 2 output max speed bits */
#define GPIO_OSPD_OSPD3 BITS(6,7) /*!< pin 3 output max speed bits */
#define GPIO_OSPD_OSPD4 BITS(8,9) /*!< pin 4 output max speed bits */
#define GPIO_OSPD_OSPD5 BITS(10,11) /*!< pin 5 output max speed bits */
#define GPIO_OSPD_OSPD6 BITS(12,13) /*!< pin 6 output max speed bits */
#define GPIO_OSPD_OSPD7 BITS(14,15) /*!< pin 7 output max speed bits */
#define GPIO_OSPD_OSPD8 BITS(16,17) /*!< pin 8 output max speed bits */
#define GPIO_OSPD_OSPD9 BITS(18,19) /*!< pin 9 output max speed bits */
#define GPIO_OSPD_OSPD10 BITS(20,21) /*!< pin 10 output max speed bits */
#define GPIO_OSPD_OSPD11 BITS(22,23) /*!< pin 11 output max speed bits */
#define GPIO_OSPD_OSPD12 BITS(24,25) /*!< pin 12 output max speed bits */
#define GPIO_OSPD_OSPD13 BITS(26,27) /*!< pin 13 output max speed bits */
#define GPIO_OSPD_OSPD14 BITS(28,29) /*!< pin 14 output max speed bits */
#define GPIO_OSPD_OSPD15 BITS(30,31) /*!< pin 15 output max speed bits */
/* GPIO_PUD */
#define GPIO_PUD_PUD0 BITS(0,1) /*!< pin 0 pull-up or pull-down bits */
#define GPIO_PUD_PUD1 BITS(2,3) /*!< pin 1 pull-up or pull-down bits */
#define GPIO_PUD_PUD2 BITS(4,5) /*!< pin 2 pull-up or pull-down bits */
#define GPIO_PUD_PUD3 BITS(6,7) /*!< pin 3 pull-up or pull-down bits */
#define GPIO_PUD_PUD4 BITS(8,9) /*!< pin 4 pull-up or pull-down bits */
#define GPIO_PUD_PUD5 BITS(10,11) /*!< pin 5 pull-up or pull-down bits */
#define GPIO_PUD_PUD6 BITS(12,13) /*!< pin 6 pull-up or pull-down bits */
#define GPIO_PUD_PUD7 BITS(14,15) /*!< pin 7 pull-up or pull-down bits */
#define GPIO_PUD_PUD8 BITS(16,17) /*!< pin 8 pull-up or pull-down bits */
#define GPIO_PUD_PUD9 BITS(18,19) /*!< pin 9 pull-up or pull-down bits */
#define GPIO_PUD_PUD10 BITS(20,21) /*!< pin 10 pull-up or pull-down bits */
#define GPIO_PUD_PUD11 BITS(22,23) /*!< pin 11 pull-up or pull-down bits */
#define GPIO_PUD_PUD12 BITS(24,25) /*!< pin 12 pull-up or pull-down bits */
#define GPIO_PUD_PUD13 BITS(26,27) /*!< pin 13 pull-up or pull-down bits */
#define GPIO_PUD_PUD14 BITS(28,29) /*!< pin 14 pull-up or pull-down bits */
#define GPIO_PUD_PUD15 BITS(30,31) /*!< pin 15 pull-up or pull-down bits */
/* GPIO_ISTAT */
#define GPIO_ISTAT_ISTAT0 BIT(0) /*!< pin 0 input status */
#define GPIO_ISTAT_ISTAT1 BIT(1) /*!< pin 1 input status */
#define GPIO_ISTAT_ISTAT2 BIT(2) /*!< pin 2 input status */
#define GPIO_ISTAT_ISTAT3 BIT(3) /*!< pin 3 input status */
#define GPIO_ISTAT_ISTAT4 BIT(4) /*!< pin 4 input status */
#define GPIO_ISTAT_ISTAT5 BIT(5) /*!< pin 5 input status */
#define GPIO_ISTAT_ISTAT6 BIT(6) /*!< pin 6 input status */
#define GPIO_ISTAT_ISTAT7 BIT(7) /*!< pin 7 input status */
#define GPIO_ISTAT_ISTAT8 BIT(8) /*!< pin 8 input status */
#define GPIO_ISTAT_ISTAT9 BIT(9) /*!< pin 9 input status */
#define GPIO_ISTAT_ISTAT10 BIT(10) /*!< pin 10 input status */
#define GPIO_ISTAT_ISTAT11 BIT(11) /*!< pin 11 input status */
#define GPIO_ISTAT_ISTAT12 BIT(12) /*!< pin 12 input status */
#define GPIO_ISTAT_ISTAT13 BIT(13) /*!< pin 13 input status */
#define GPIO_ISTAT_ISTAT14 BIT(14) /*!< pin 14 input status */
#define GPIO_ISTAT_ISTAT15 BIT(15) /*!< pin 15 input status */
/* GPIO_OCTL */
#define GPIO_OCTL_OCTL0 BIT(0) /*!< pin 0 output bit */
#define GPIO_OCTL_OCTL1 BIT(1) /*!< pin 1 output bit */
#define GPIO_OCTL_OCTL2 BIT(2) /*!< pin 2 output bit */
#define GPIO_OCTL_OCTL3 BIT(3) /*!< pin 3 output bit */
#define GPIO_OCTL_OCTL4 BIT(4) /*!< pin 4 output bit */
#define GPIO_OCTL_OCTL5 BIT(5) /*!< pin 5 output bit */
#define GPIO_OCTL_OCTL6 BIT(6) /*!< pin 6 output bit */
#define GPIO_OCTL_OCTL7 BIT(7) /*!< pin 7 output bit */
#define GPIO_OCTL_OCTL8 BIT(8) /*!< pin 8 output bit */
#define GPIO_OCTL_OCTL9 BIT(9) /*!< pin 9 output bit */
#define GPIO_OCTL_OCTL10 BIT(10) /*!< pin 10 output bit */
#define GPIO_OCTL_OCTL11 BIT(11) /*!< pin 11 output bit */
#define GPIO_OCTL_OCTL12 BIT(12) /*!< pin 12 output bit */
#define GPIO_OCTL_OCTL13 BIT(13) /*!< pin 13 output bit */
#define GPIO_OCTL_OCTL14 BIT(14) /*!< pin 14 output bit */
#define GPIO_OCTL_OCTL15 BIT(15) /*!< pin 15 output bit */
/* GPIO_BOP */
#define GPIO_BOP_BOP0 BIT(0) /*!< pin 0 set bit */
#define GPIO_BOP_BOP1 BIT(1) /*!< pin 1 set bit */
#define GPIO_BOP_BOP2 BIT(2) /*!< pin 2 set bit */
#define GPIO_BOP_BOP3 BIT(3) /*!< pin 3 set bit */
#define GPIO_BOP_BOP4 BIT(4) /*!< pin 4 set bit */
#define GPIO_BOP_BOP5 BIT(5) /*!< pin 5 set bit */
#define GPIO_BOP_BOP6 BIT(6) /*!< pin 6 set bit */
#define GPIO_BOP_BOP7 BIT(7) /*!< pin 7 set bit */
#define GPIO_BOP_BOP8 BIT(8) /*!< pin 8 set bit */
#define GPIO_BOP_BOP9 BIT(9) /*!< pin 9 set bit */
#define GPIO_BOP_BOP10 BIT(10) /*!< pin 10 set bit */
#define GPIO_BOP_BOP11 BIT(11) /*!< pin 11 set bit */
#define GPIO_BOP_BOP12 BIT(12) /*!< pin 12 set bit */
#define GPIO_BOP_BOP13 BIT(13) /*!< pin 13 set bit */
#define GPIO_BOP_BOP14 BIT(14) /*!< pin 14 set bit */
#define GPIO_BOP_BOP15 BIT(15) /*!< pin 15 set bit */
#define GPIO_BOP_CR0 BIT(16) /*!< pin 0 clear bit */
#define GPIO_BOP_CR1 BIT(17) /*!< pin 1 clear bit */
#define GPIO_BOP_CR2 BIT(18) /*!< pin 2 clear bit */
#define GPIO_BOP_CR3 BIT(19) /*!< pin 3 clear bit */
#define GPIO_BOP_CR4 BIT(20) /*!< pin 4 clear bit */
#define GPIO_BOP_CR5 BIT(21) /*!< pin 5 clear bit */
#define GPIO_BOP_CR6 BIT(22) /*!< pin 6 clear bit */
#define GPIO_BOP_CR7 BIT(23) /*!< pin 7 clear bit */
#define GPIO_BOP_CR8 BIT(24) /*!< pin 8 clear bit */
#define GPIO_BOP_CR9 BIT(25) /*!< pin 9 clear bit */
#define GPIO_BOP_CR10 BIT(26) /*!< pin 10 clear bit */
#define GPIO_BOP_CR11 BIT(27) /*!< pin 11 clear bit */
#define GPIO_BOP_CR12 BIT(28) /*!< pin 12 clear bit */
#define GPIO_BOP_CR13 BIT(29) /*!< pin 13 clear bit */
#define GPIO_BOP_CR14 BIT(30) /*!< pin 14 clear bit */
#define GPIO_BOP_CR15 BIT(31) /*!< pin 15 clear bit */
/* GPIO_LOCK */
#define GPIO_LOCK_LK0 BIT(0) /*!< pin 0 lock bit */
#define GPIO_LOCK_LK1 BIT(1) /*!< pin 1 lock bit */
#define GPIO_LOCK_LK2 BIT(2) /*!< pin 2 lock bit */
#define GPIO_LOCK_LK3 BIT(3) /*!< pin 3 lock bit */
#define GPIO_LOCK_LK4 BIT(4) /*!< pin 4 lock bit */
#define GPIO_LOCK_LK5 BIT(5) /*!< pin 5 lock bit */
#define GPIO_LOCK_LK6 BIT(6) /*!< pin 6 lock bit */
#define GPIO_LOCK_LK7 BIT(7) /*!< pin 7 lock bit */
#define GPIO_LOCK_LK8 BIT(8) /*!< pin 8 lock bit */
#define GPIO_LOCK_LK9 BIT(9) /*!< pin 9 lock bit */
#define GPIO_LOCK_LK10 BIT(10) /*!< pin 10 lock bit */
#define GPIO_LOCK_LK11 BIT(11) /*!< pin 11 lock bit */
#define GPIO_LOCK_LK12 BIT(12) /*!< pin 12 lock bit */
#define GPIO_LOCK_LK13 BIT(13) /*!< pin 13 lock bit */
#define GPIO_LOCK_LK14 BIT(14) /*!< pin 14 lock bit */
#define GPIO_LOCK_LK15 BIT(15) /*!< pin 15 lock bit */
#define GPIO_LOCK_LKK BIT(16) /*!< pin sequence lock key */
/* GPIO_AFSEL0 */
#define GPIO_AFSEL0_SEL0 BITS(0,3) /*!< pin 0 alternate function selected */
#define GPIO_AFSEL0_SEL1 BITS(4,7) /*!< pin 1 alternate function selected */
#define GPIO_AFSEL0_SEL2 BITS(8,11) /*!< pin 2 alternate function selected */
#define GPIO_AFSEL0_SEL3 BITS(12,15) /*!< pin 3 alternate function selected */
#define GPIO_AFSEL0_SEL4 BITS(16,19) /*!< pin 4 alternate function selected */
#define GPIO_AFSEL0_SEL5 BITS(20,23) /*!< pin 5 alternate function selected */
#define GPIO_AFSEL0_SEL6 BITS(24,27) /*!< pin 6 alternate function selected */
#define GPIO_AFSEL0_SEL7 BITS(28,31) /*!< pin 7 alternate function selected */
/* GPIO_AFSEL1 */
#define GPIO_AFSEL1_SEL8 BITS(0,3) /*!< pin 8 alternate function selected */
#define GPIO_AFSEL1_SEL9 BITS(4,7) /*!< pin 9 alternate function selected */
#define GPIO_AFSEL1_SEL10 BITS(8,11) /*!< pin 10 alternate function selected */
#define GPIO_AFSEL1_SEL11 BITS(12,15) /*!< pin 11 alternate function selected */
#define GPIO_AFSEL1_SEL12 BITS(16,19) /*!< pin 12 alternate function selected */
#define GPIO_AFSEL1_SEL13 BITS(20,23) /*!< pin 13 alternate function selected */
#define GPIO_AFSEL1_SEL14 BITS(24,27) /*!< pin 14 alternate function selected */
#define GPIO_AFSEL1_SEL15 BITS(28,31) /*!< pin 15 alternate function selected */
/* GPIO_BC */
#define GPIO_BC_CR0 BIT(0) /*!< pin 0 clear bit */
#define GPIO_BC_CR1 BIT(1) /*!< pin 1 clear bit */
#define GPIO_BC_CR2 BIT(2) /*!< pin 2 clear bit */
#define GPIO_BC_CR3 BIT(3) /*!< pin 3 clear bit */
#define GPIO_BC_CR4 BIT(4) /*!< pin 4 clear bit */
#define GPIO_BC_CR5 BIT(5) /*!< pin 5 clear bit */
#define GPIO_BC_CR6 BIT(6) /*!< pin 6 clear bit */
#define GPIO_BC_CR7 BIT(7) /*!< pin 7 clear bit */
#define GPIO_BC_CR8 BIT(8) /*!< pin 8 clear bit */
#define GPIO_BC_CR9 BIT(9) /*!< pin 9 clear bit */
#define GPIO_BC_CR10 BIT(10) /*!< pin 10 clear bit */
#define GPIO_BC_CR11 BIT(11) /*!< pin 11 clear bit */
#define GPIO_BC_CR12 BIT(12) /*!< pin 12 clear bit */
#define GPIO_BC_CR13 BIT(13) /*!< pin 13 clear bit */
#define GPIO_BC_CR14 BIT(14) /*!< pin 14 clear bit */
#define GPIO_BC_CR15 BIT(15) /*!< pin 15 clear bit */
/* GPIO_TG */
#define GPIO_TG_TG0 BIT(0) /*!< pin 0 toggle bit */
#define GPIO_TG_TG1 BIT(1) /*!< pin 1 toggle bit */
#define GPIO_TG_TG2 BIT(2) /*!< pin 2 toggle bit */
#define GPIO_TG_TG3 BIT(3) /*!< pin 3 toggle bit */
#define GPIO_TG_TG4 BIT(4) /*!< pin 4 toggle bit */
#define GPIO_TG_TG5 BIT(5) /*!< pin 5 toggle bit */
#define GPIO_TG_TG6 BIT(6) /*!< pin 6 toggle bit */
#define GPIO_TG_TG7 BIT(7) /*!< pin 7 toggle bit */
#define GPIO_TG_TG8 BIT(8) /*!< pin 8 toggle bit */
#define GPIO_TG_TG9 BIT(9) /*!< pin 9 toggle bit */
#define GPIO_TG_TG10 BIT(10) /*!< pin 10 toggle bit */
#define GPIO_TG_TG11 BIT(11) /*!< pin 11 toggle bit */
#define GPIO_TG_TG12 BIT(12) /*!< pin 12 toggle bit */
#define GPIO_TG_TG13 BIT(13) /*!< pin 13 toggle bit */
#define GPIO_TG_TG14 BIT(14) /*!< pin 14 toggle bit */
#define GPIO_TG_TG15 BIT(15) /*!< pin 15 toggle bit */
/* constants definitions */
typedef FlagStatus bit_status;
/* output mode definitions */
#define CTL_CLTR(regval) (BITS(0,1) & ((uint32_t)(regval) << 0))
#define GPIO_MODE_INPUT CTL_CLTR(0) /*!< input mode */
#define GPIO_MODE_OUTPUT CTL_CLTR(1) /*!< output mode */
#define GPIO_MODE_AF CTL_CLTR(2) /*!< alternate function mode */
#define GPIO_MODE_ANALOG CTL_CLTR(3) /*!< analog mode */
/* pull-up/pull-down definitions */
#define PUD_PUPD(regval) (BITS(0,1) & ((uint32_t)(regval) << 0))
#define GPIO_PUPD_NONE PUD_PUPD(0) /*!< floating mode, no pull-up and pull-down resistors */
#define GPIO_PUPD_PULLUP PUD_PUPD(1) /*!< with pull-up resistor */
#define GPIO_PUPD_PULLDOWN PUD_PUPD(2) /*!< with pull-down resistor */
/* GPIO pin definitions */
#define GPIO_PIN_0 BIT(0) /*!< GPIO pin 0 */
#define GPIO_PIN_1 BIT(1) /*!< GPIO pin 1 */
#define GPIO_PIN_2 BIT(2) /*!< GPIO pin 2 */
#define GPIO_PIN_3 BIT(3) /*!< GPIO pin 3 */
#define GPIO_PIN_4 BIT(4) /*!< GPIO pin 4 */
#define GPIO_PIN_5 BIT(5) /*!< GPIO pin 5 */
#define GPIO_PIN_6 BIT(6) /*!< GPIO pin 6 */
#define GPIO_PIN_7 BIT(7) /*!< GPIO pin 7 */
#define GPIO_PIN_8 BIT(8) /*!< GPIO pin 8 */
#define GPIO_PIN_9 BIT(9) /*!< GPIO pin 9 */
#define GPIO_PIN_10 BIT(10) /*!< GPIO pin 10 */
#define GPIO_PIN_11 BIT(11) /*!< GPIO pin 11 */
#define GPIO_PIN_12 BIT(12) /*!< GPIO pin 12 */
#define GPIO_PIN_13 BIT(13) /*!< GPIO pin 13 */
#define GPIO_PIN_14 BIT(14) /*!< GPIO pin 14 */
#define GPIO_PIN_15 BIT(15) /*!< GPIO pin 15 */
#define GPIO_PIN_ALL BITS(0,15) /*!< GPIO pin all */
/* GPIO mode configuration values */
#define GPIO_MODE_SET(n, mode) ((uint32_t)((uint32_t)(mode) << (2U * (n))))
#define GPIO_MODE_MASK(n) (0x3U << (2U * (n)))
/* GPIO pull-up/pull-down values */
#define GPIO_PUPD_SET(n, pupd) ((uint32_t)((uint32_t)(pupd) << (2U * (n))))
#define GPIO_PUPD_MASK(n) (0x3U << (2U * (n)))
/* GPIO output speed values */
#define GPIO_OSPEED_SET(n, speed) ((uint32_t)((uint32_t)(speed) << (2U * (n))))
#define GPIO_OSPEED_MASK(n) (0x3U << (2U * (n)))
/* GPIO output type */
#define GPIO_OTYPE_PP ((uint8_t)(0x00U)) /*!< push pull mode */
#define GPIO_OTYPE_OD ((uint8_t)(0x01U)) /*!< open drain mode */
/* GPIO output max speed value */
#define OSPD_OSPD0(regval) (BITS(0,1) & ((uint32_t)(regval) << 0))
#define GPIO_OSPEED_2MHZ OSPD_OSPD0(0) /*!< output max speed 2MHz */
#define GPIO_OSPEED_10MHZ OSPD_OSPD0(1) /*!< output max speed 10MHz */
#define GPIO_OSPEED_50MHZ OSPD_OSPD0(3) /*!< output max speed 50MHz */
/* GPIO alternate function values */
#define GPIO_AFR_SET(n, af) ((uint32_t)((uint32_t)(af) << (4U * (n))))
#define GPIO_AFR_MASK(n) (0xFU << (4U * (n)))
/* GPIO alternate function */
#define AF(regval) (BITS(0,3) & ((uint32_t)(regval) << 0))
#define GPIO_AF_0 AF(0) /*!< alternate function 0 selected */
#define GPIO_AF_1 AF(1) /*!< alternate function 1 selected */
#define GPIO_AF_2 AF(2) /*!< alternate function 2 selected */
#define GPIO_AF_3 AF(3) /*!< alternate function 3 selected */
#define GPIO_AF_4 AF(4) /*!< alternate function 4 selected (port A,B only) */
#define GPIO_AF_5 AF(5) /*!< alternate function 5 selected (port A,B only) */
#define GPIO_AF_6 AF(6) /*!< alternate function 6 selected (port A,B only) */
#define GPIO_AF_7 AF(7) /*!< alternate function 7 selected (port A,B only) */
/* function declarations */
/* reset GPIO port */
void gpio_deinit(uint32_t gpio_periph);
/* set GPIO mode */
void gpio_mode_set(uint32_t gpio_periph, uint32_t mode, uint32_t pull_up_down, uint32_t pin);
/* set GPIO output type and speed */
void gpio_output_options_set(uint32_t gpio_periph, uint8_t otype, uint32_t speed, uint32_t pin);
/* set GPIO pin bit */
void gpio_bit_set(uint32_t gpio_periph, uint32_t pin);
/* reset GPIO pin bit */
void gpio_bit_reset(uint32_t gpio_periph, uint32_t pin);
/* write data to the specified GPIO pin */
void gpio_bit_write(uint32_t gpio_periph, uint32_t pin, bit_status bit_value);
/* write data to the specified GPIO port */
void gpio_port_write(uint32_t gpio_periph, uint16_t data);
/* get GPIO pin input status */
FlagStatus gpio_input_bit_get(uint32_t gpio_periph, uint32_t pin);
/* get GPIO port input status */
uint16_t gpio_input_port_get(uint32_t gpio_periph);
/* get GPIO pin output status */
FlagStatus gpio_output_bit_get(uint32_t gpio_periph, uint32_t pin);
/* get GPIO port output status */
uint16_t gpio_output_port_get(uint32_t gpio_periph);
/* set GPIO alternate function */
void gpio_af_set(uint32_t gpio_periph,uint32_t alt_func_num, uint32_t pin);
/* lock GPIO pin bit */
void gpio_pin_lock(uint32_t gpio_periph, uint32_t pin);
/* toggle GPIO pin status */
void gpio_bit_toggle(uint32_t gpio_periph, uint32_t pin);
/* toggle GPIO port status */
void gpio_port_toggle(uint32_t gpio_periph);
#endif /* GD32E230_GPIO_H */