rt-thread-official/bsp/bouffalo_lab/bl808/flash_prog_cfg.ini

[cfg]
# 0: no erase, 1:programmed section erase, 2: chip erase
erase = 1
# skip mode set first para is skip addr, second para is skip len, multi-segment region with ; separated
skip_mode = 0x0, 0x0
# 0: not use isp mode, #1: isp mode
boot2_isp_mode = 0

[FW1]
filedir = ./m0/rtthread_m0.bin
address = 0x000000

[FW2]
filedir = ./lp/rtthread_lp.bin
address = 0xC0000

[FW3]
filedir = ./d0/whole_img_d0.bin
address = 0x100000
add bl60x/bl70x/bl61x/bl808 (#7063) Co-authored-by: flyingcys <flyingcys!163.com> 2023-03-19 14:41:18 +08:00			`[cfg]`
			`# 0: no erase, 1:programmed section erase, 2: chip erase`
			`erase = 1`
			`# skip mode set first para is skip addr, second para is skip len, multi-segment region with ; separated`
			`skip_mode = 0x0, 0x0`
			`# 0: not use isp mode, #1: isp mode`
			`boot2_isp_mode = 0`

			`[FW1]`
			`filedir = ./m0/rtthread_m0.bin`
			`address = 0x000000`
[bsp] add bl808 lp core (#7069) * Add riscv_32e support * add bl808 lp core * update README.md 2023-03-19 23:16:12 +08:00
			`[FW2]`
			`filedir = ./lp/rtthread_lp.bin`
			`address = 0xC0000`
[bsp/bouffalo_lab]add bl808-d0 (#7373) Co-authored-by: chenyisong <chenyisong@tuya.com> 2023-04-26 08:50:03 +08:00
			`[FW3]`
			`filedir = ./d0/whole_img_d0.bin`
			`address = 0x100000`