1696 lines
50 KiB
C
1696 lines
50 KiB
C
|
/*
|
||
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
||
|
*
|
||
|
* SPDX-License-Identifier: Apache-2.0
|
||
|
*
|
||
|
* Change Logs:
|
||
|
* Date Author Notes
|
||
|
* 2024-07-31 shelton first version
|
||
|
*/
|
||
|
|
||
|
#include "drv_common.h"
|
||
|
#include "drv_hard_i2c.h"
|
||
|
#include "drv_config.h"
|
||
|
#include <string.h>
|
||
|
|
||
|
#if defined(BSP_USING_HARD_I2C1) || defined(BSP_USING_HARD_I2C2) || \
|
||
|
defined(BSP_USING_HARD_I2C3)
|
||
|
|
||
|
//#define DRV_DEBUG
|
||
|
#define LOG_TAG "drv.hwi2c"
|
||
|
#include <drv_log.h>
|
||
|
|
||
|
enum
|
||
|
{
|
||
|
#ifdef BSP_USING_HARD_I2C1
|
||
|
I2C1_INDEX,
|
||
|
#endif
|
||
|
#ifdef BSP_USING_HARD_I2C2
|
||
|
I2C2_INDEX,
|
||
|
#endif
|
||
|
#ifdef BSP_USING_HARD_I2C3
|
||
|
I2C3_INDEX,
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
static struct at32_i2c_handle i2c_handle[] = {
|
||
|
#ifdef BSP_USING_HARD_I2C1
|
||
|
I2C1_CONFIG,
|
||
|
#endif
|
||
|
|
||
|
#ifdef BSP_USING_HARD_I2C2
|
||
|
I2C2_CONFIG,
|
||
|
#endif
|
||
|
|
||
|
#ifdef BSP_USING_HARD_I2C3
|
||
|
I2C3_CONFIG,
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
static struct at32_i2c i2cs[sizeof(i2c_handle) / sizeof(i2c_handle[0])] = {0};
|
||
|
|
||
|
/* private rt-thread i2c ops function */
|
||
|
static rt_ssize_t master_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num);
|
||
|
static struct rt_i2c_bus_device_ops at32_i2c_ops =
|
||
|
{
|
||
|
master_xfer,
|
||
|
RT_NULL,
|
||
|
RT_NULL
|
||
|
};
|
||
|
|
||
|
static rt_err_t at32_i2c_configure(struct rt_i2c_bus_device *bus)
|
||
|
{
|
||
|
RT_ASSERT(RT_NULL != bus);
|
||
|
struct at32_i2c *instance = rt_container_of(bus, struct at32_i2c, i2c_bus);
|
||
|
|
||
|
at32_msp_i2c_init(instance->handle->i2c_x);
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
i2c_init(instance->handle->i2c_x, I2C_FSMODE_DUTY_2_1, instance->handle->timing);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
i2c_init(instance->handle->i2c_x, 0x0F, instance->handle->timing);
|
||
|
#endif
|
||
|
i2c_own_address1_set(instance->handle->i2c_x, I2C_ADDRESS_MODE_7BIT, HWI2C_OWN_ADDRESS);
|
||
|
|
||
|
nvic_irq_enable(instance->handle->ev_irqn, 0, 0);
|
||
|
nvic_irq_enable(instance->handle->er_irqn, 0, 0);
|
||
|
|
||
|
i2c_enable(instance->handle->i2c_x, TRUE);
|
||
|
|
||
|
return RT_EOK;
|
||
|
}
|
||
|
|
||
|
static void i2c_dma_config(struct at32_i2c_handle *handle, rt_uint8_t *buffer, rt_uint32_t size)
|
||
|
{
|
||
|
struct dma_config *dma = RT_NULL;
|
||
|
|
||
|
if(handle->comm.mode == I2C_DMA_MA_TX)
|
||
|
{
|
||
|
dma = handle->dma_tx;
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
dma->dma_channel->paddr = (rt_uint32_t)&(handle->i2c_x->dt);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
dma->dma_channel->paddr = (rt_uint32_t)&(handle->i2c_x->txdt);
|
||
|
#endif
|
||
|
}
|
||
|
else if(handle->comm.mode == I2C_DMA_MA_RX)
|
||
|
{
|
||
|
dma = handle->dma_rx;
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
dma->dma_channel->paddr = (rt_uint32_t)&(handle->i2c_x->dt);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
dma->dma_channel->paddr = (rt_uint32_t)&(handle->i2c_x->rxdt);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
dma->dma_channel->dtcnt = size;
|
||
|
dma->dma_channel->maddr = (rt_uint32_t)buffer;
|
||
|
|
||
|
/* enable transmit complete interrupt */
|
||
|
dma_interrupt_enable(dma->dma_channel, DMA_FDT_INT, TRUE);
|
||
|
|
||
|
/* mark dma flag */
|
||
|
dma->dma_done = RT_FALSE;
|
||
|
/* enable dma channel */
|
||
|
dma_channel_enable(dma->dma_channel, TRUE);
|
||
|
}
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
void i2c_refresh_txdt_register(i2c_type *i2c_x)
|
||
|
{
|
||
|
/* clear tdis flag */
|
||
|
if (i2c_flag_get(i2c_x, I2C_TDIS_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_x->txdt = 0x00;
|
||
|
}
|
||
|
/* refresh txdt register*/
|
||
|
if (i2c_flag_get(i2c_x, I2C_TDBE_FLAG) == RESET)
|
||
|
{
|
||
|
i2c_x->sts_bit.tdbe = 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_reset_ctrl2_register(i2c_type *i2c_x)
|
||
|
{
|
||
|
i2c_x->ctrl2_bit.saddr = 0;
|
||
|
i2c_x->ctrl2_bit.readh10 = 0;
|
||
|
i2c_x->ctrl2_bit.cnt = 0;
|
||
|
i2c_x->ctrl2_bit.rlden = 0;
|
||
|
i2c_x->ctrl2_bit.dir = 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
i2c_status_type i2c_wait_end(struct at32_i2c_handle *handle, uint32_t timeout)
|
||
|
{
|
||
|
while(handle->comm.status != I2C_END)
|
||
|
{
|
||
|
/* check timeout */
|
||
|
if((timeout--) == 0)
|
||
|
{
|
||
|
return I2C_ERR_TIMEOUT;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if(handle->comm.error_code != I2C_OK)
|
||
|
{
|
||
|
return handle->comm.error_code;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_wait_flag(struct at32_i2c_handle *handle, uint32_t flag, uint32_t event_check, uint32_t timeout)
|
||
|
{
|
||
|
if(flag == I2C_BUSYF_FLAG)
|
||
|
{
|
||
|
while(i2c_flag_get(handle->i2c_x, flag) != RESET)
|
||
|
{
|
||
|
/* check timeout */
|
||
|
if((timeout--) == 0)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_TIMEOUT;
|
||
|
|
||
|
return I2C_ERR_TIMEOUT;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
while(i2c_flag_get(handle->i2c_x, flag) == RESET)
|
||
|
{
|
||
|
/* check the ack fail flag */
|
||
|
if(event_check & I2C_EVENT_CHECK_ACKFAIL)
|
||
|
{
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
#endif
|
||
|
/* clear ack fail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_ACKFAIL;
|
||
|
|
||
|
return I2C_ERR_ACKFAIL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* check the stop flag */
|
||
|
if(event_check & I2C_EVENT_CHECK_STOP)
|
||
|
{
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_STOPF_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear stop flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_STOPF_FLAG);
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
i2c_reset_ctrl2_register(handle->i2c_x);
|
||
|
#endif
|
||
|
handle->comm.error_code = I2C_ERR_STOP;
|
||
|
|
||
|
return I2C_ERR_STOP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* check timeout */
|
||
|
if((timeout--) == 0)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_TIMEOUT;
|
||
|
|
||
|
return I2C_ERR_TIMEOUT;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
i2c_status_type i2c_master_write_addr(struct at32_i2c_handle *handle, uint16_t address, uint32_t timeout)
|
||
|
{
|
||
|
/* generate start condtion */
|
||
|
i2c_start_generate(handle->i2c_x);
|
||
|
|
||
|
/* wait for the start flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_STARTF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_START;
|
||
|
|
||
|
return I2C_ERR_START;
|
||
|
}
|
||
|
|
||
|
if(handle->i2c_x->oaddr1_bit.addr1mode == I2C_ADDRESS_MODE_7BIT)
|
||
|
{
|
||
|
/* send slave address */
|
||
|
i2c_7bit_address_send(handle->i2c_x, address, I2C_DIRECTION_TRANSMIT);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* send slave 10-bit address header */
|
||
|
i2c_data_send(handle->i2c_x, (uint8_t)((address & 0x0300) >> 7) | 0xF0);
|
||
|
|
||
|
/* wait for the addrh flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_ADDRHF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ADDR10;
|
||
|
|
||
|
return I2C_ERR_ADDR10;
|
||
|
}
|
||
|
|
||
|
/* send slave address */
|
||
|
i2c_data_send(handle->i2c_x, (uint8_t)(address & 0x00FF));
|
||
|
}
|
||
|
|
||
|
/* wait for the addr7 flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_ADDR7F_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ADDR;
|
||
|
|
||
|
return I2C_ERR_ADDR;
|
||
|
}
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_read_addr(struct at32_i2c_handle *handle, uint16_t address, uint32_t timeout)
|
||
|
{
|
||
|
/* enable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* generate start condtion */
|
||
|
i2c_start_generate(handle->i2c_x);
|
||
|
|
||
|
/* wait for the start flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_STARTF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_START;
|
||
|
|
||
|
return I2C_ERR_START;
|
||
|
}
|
||
|
|
||
|
if(handle->i2c_x->oaddr1_bit.addr1mode == I2C_ADDRESS_MODE_7BIT)
|
||
|
{
|
||
|
/* send slave address */
|
||
|
i2c_7bit_address_send(handle->i2c_x, address, I2C_DIRECTION_RECEIVE);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* send slave 10-bit address header */
|
||
|
i2c_data_send(handle->i2c_x, (uint8_t)((address & 0x0300) >> 7) | 0xF0);
|
||
|
|
||
|
/* wait for the addrh flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_ADDRHF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ADDR10;
|
||
|
|
||
|
return I2C_ERR_ADDR10;
|
||
|
}
|
||
|
|
||
|
/* send slave address */
|
||
|
i2c_data_send(handle->i2c_x, (uint8_t)(address & 0x00FF));
|
||
|
|
||
|
/* wait for the addr7 flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_ADDR7F_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ADDR;
|
||
|
|
||
|
return I2C_ERR_ADDR;
|
||
|
}
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* generate restart condtion */
|
||
|
i2c_start_generate(handle->i2c_x);
|
||
|
|
||
|
/* wait for the start flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_STARTF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_START;
|
||
|
|
||
|
return I2C_ERR_START;
|
||
|
}
|
||
|
|
||
|
/* send slave 10-bit address header */
|
||
|
i2c_data_send(handle->i2c_x, (uint8_t)((address & 0x0300) >> 7) | 0xF1);
|
||
|
}
|
||
|
|
||
|
/* wait for the addr7 flag to be set */
|
||
|
if(i2c_wait_flag(handle, I2C_ADDR7F_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ADDR;
|
||
|
|
||
|
return I2C_ERR_ADDR;
|
||
|
}
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_transmit_int(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_INT_MA_TX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.timeout = timeout;
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* ack acts on the current byte */
|
||
|
i2c_master_receive_ack_set(handle->i2c_x, I2C_MASTER_ACK_CURRENT);
|
||
|
|
||
|
/* send slave address */
|
||
|
if(i2c_master_write_addr(handle, address, timeout) != I2C_OK)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
return I2C_ERR_STEP_2;
|
||
|
}
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* enable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT | I2C_DATA_INT | I2C_ERR_INT, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_receive_int(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_INT_MA_RX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.timeout = timeout;
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* ack acts on the current byte */
|
||
|
i2c_master_receive_ack_set(handle->i2c_x, I2C_MASTER_ACK_CURRENT);
|
||
|
|
||
|
/* enable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* send slave address */
|
||
|
if(i2c_master_read_addr(handle, address, timeout) != I2C_OK)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
return I2C_ERR_STEP_2;
|
||
|
}
|
||
|
|
||
|
if(handle->comm.pcount == 1)
|
||
|
{
|
||
|
/* disable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
}
|
||
|
else if(handle->comm.pcount == 2)
|
||
|
{
|
||
|
/* ack acts on the next byte */
|
||
|
i2c_master_receive_ack_set(handle->i2c_x, I2C_MASTER_ACK_NEXT);
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* disable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, FALSE);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* enable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
}
|
||
|
|
||
|
/* enable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT | I2C_DATA_INT | I2C_ERR_INT, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_transmit_dma(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_DMA_MA_TX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.timeout = timeout;
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* ack acts on the current byte */
|
||
|
i2c_master_receive_ack_set(handle->i2c_x, I2C_MASTER_ACK_CURRENT);
|
||
|
|
||
|
/* disable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* configure the dma channel */
|
||
|
i2c_dma_config(handle, pdata, size);
|
||
|
|
||
|
/* send slave address */
|
||
|
if(i2c_master_write_addr(handle, address, timeout) != I2C_OK)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
return I2C_ERR_STEP_2;
|
||
|
}
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* enable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_receive_dma(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_DMA_MA_RX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.timeout = timeout;
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* ack acts on the current byte */
|
||
|
i2c_master_receive_ack_set(handle->i2c_x, I2C_MASTER_ACK_CURRENT);
|
||
|
|
||
|
/* enable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* disable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* configure the dma channel */
|
||
|
i2c_dma_config(handle, pdata, size);
|
||
|
|
||
|
/* send slave address */
|
||
|
if(i2c_master_read_addr(handle, address, timeout) != I2C_OK)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
return I2C_ERR_STEP_2;
|
||
|
}
|
||
|
|
||
|
if(size == 1)
|
||
|
{
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
|
||
|
/* disable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
/* enable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, TRUE);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* enable dma end transfer */
|
||
|
i2c_dma_end_transfer_set(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* enable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, TRUE);
|
||
|
|
||
|
/* clear addr flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ADDR7F_FLAG);
|
||
|
}
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
|
||
|
void i2c_master_tx_isr_int(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
/* step 1: transfer data */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_TDBE_FLAG) != RESET)
|
||
|
{
|
||
|
if(handle->comm.pcount == 0)
|
||
|
{
|
||
|
rt_completion_done(&handle->completion);
|
||
|
|
||
|
/* transfer complete */
|
||
|
handle->comm.status = I2C_END;
|
||
|
|
||
|
/* disable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT | I2C_DATA_INT | I2C_ERR_INT, FALSE);
|
||
|
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* write data */
|
||
|
i2c_data_send(handle->i2c_x, *handle->comm.pbuff++);
|
||
|
handle->comm.pcount--;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_master_rx_isr_int(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_TDC_FLAG) != RESET)
|
||
|
{
|
||
|
if(handle->comm.pcount == 3)
|
||
|
{
|
||
|
/* disable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
}
|
||
|
else if(handle->comm.pcount == 2)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
|
||
|
/* transfer complete */
|
||
|
rt_completion_done(&handle->completion);
|
||
|
handle->comm.status = I2C_END;
|
||
|
|
||
|
/* disable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT | I2C_DATA_INT | I2C_ERR_INT, FALSE);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
}
|
||
|
}
|
||
|
else if(i2c_flag_get(handle->i2c_x, I2C_RDBF_FLAG) != RESET)
|
||
|
{
|
||
|
if(handle->comm.pcount > 3)
|
||
|
{
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
}
|
||
|
else if((handle->comm.pcount == 3) || (handle->comm.pcount == 2))
|
||
|
{
|
||
|
/* disable rdbf interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_DATA_INT, FALSE);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
|
||
|
/* transfer complete */
|
||
|
rt_completion_done(&handle->completion);
|
||
|
handle->comm.status = I2C_END;
|
||
|
|
||
|
/* disable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT | I2C_DATA_INT | I2C_ERR_INT, FALSE);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_master_tx_isr_dma(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
/* tdc interrupt */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_TDC_FLAG) != RESET)
|
||
|
{
|
||
|
rt_completion_done(&handle->completion);
|
||
|
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
/* disable evt interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT, FALSE);
|
||
|
|
||
|
/* transfer complete */
|
||
|
handle->comm.status = I2C_END;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_evt_isr(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
switch(handle->comm.mode)
|
||
|
{
|
||
|
case I2C_INT_MA_TX:
|
||
|
i2c_master_tx_isr_int(handle);
|
||
|
break;
|
||
|
case I2C_INT_MA_RX:
|
||
|
i2c_master_rx_isr_int(handle);
|
||
|
break;
|
||
|
case I2C_DMA_MA_TX:
|
||
|
i2c_master_tx_isr_dma(handle);
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
void i2c_start_transfer(struct at32_i2c_handle *handle, uint16_t address, i2c_start_mode_type start)
|
||
|
{
|
||
|
if (handle->comm.pcount > MAX_TRANSFER_CNT)
|
||
|
{
|
||
|
handle->comm.psize = MAX_TRANSFER_CNT;
|
||
|
|
||
|
i2c_transmit_set(handle->i2c_x, address, handle->comm.psize, I2C_RELOAD_MODE, start);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
handle->comm.psize = handle->comm.pcount;
|
||
|
|
||
|
i2c_transmit_set(handle->i2c_x, address, handle->comm.psize, I2C_AUTO_STOP_MODE, start);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_start_transfer_dma(struct at32_i2c_handle *handle, uint16_t address, i2c_start_mode_type start)
|
||
|
{
|
||
|
if (handle->comm.pcount > MAX_TRANSFER_CNT)
|
||
|
{
|
||
|
handle->comm.psize = MAX_TRANSFER_CNT;
|
||
|
|
||
|
/* config dma */
|
||
|
i2c_dma_config(handle, handle->comm.pbuff, handle->comm.psize);
|
||
|
|
||
|
i2c_transmit_set(handle->i2c_x, address, handle->comm.psize, I2C_RELOAD_MODE, start);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
handle->comm.psize = handle->comm.pcount;
|
||
|
|
||
|
/* config dma */
|
||
|
i2c_dma_config(handle, handle->comm.pbuff, handle->comm.psize);
|
||
|
|
||
|
i2c_transmit_set(handle->i2c_x, address, handle->comm.psize, I2C_AUTO_STOP_MODE, start);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_transmit_int(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_INT_MA_TX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if (i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* start transfer */
|
||
|
i2c_start_transfer(handle, address, I2C_GEN_START_WRITE);
|
||
|
|
||
|
/* enable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_receive_int(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_INT_MA_RX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if (i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* start transfer */
|
||
|
i2c_start_transfer(handle, address, I2C_GEN_START_READ);
|
||
|
|
||
|
/* enable interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_RD_INT, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_transmit_dma(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_DMA_MA_TX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* disable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_TX, FALSE);
|
||
|
|
||
|
/* start transfer */
|
||
|
i2c_start_transfer_dma(handle, address, I2C_GEN_START_WRITE);
|
||
|
|
||
|
/* enable i2c interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE);
|
||
|
|
||
|
/* enable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_TX, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
i2c_status_type i2c_master_receive_dma(struct at32_i2c_handle *handle, uint16_t address, uint8_t *pdata, uint16_t size, uint32_t timeout)
|
||
|
{
|
||
|
/* initialization parameters */
|
||
|
handle->comm.mode = I2C_DMA_MA_RX;
|
||
|
handle->comm.status = I2C_START;
|
||
|
|
||
|
handle->comm.pbuff = pdata;
|
||
|
handle->comm.pcount = size;
|
||
|
|
||
|
handle->comm.error_code = I2C_OK;
|
||
|
|
||
|
/* wait for the busy flag to be reset */
|
||
|
if(i2c_wait_flag(handle, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK)
|
||
|
{
|
||
|
return I2C_ERR_STEP_1;
|
||
|
}
|
||
|
|
||
|
/* disable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_RX, FALSE);
|
||
|
|
||
|
/* start transfer */
|
||
|
i2c_start_transfer_dma(handle, address, I2C_GEN_START_READ);
|
||
|
|
||
|
/* enable i2c interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE);
|
||
|
|
||
|
/* enable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_RX, TRUE);
|
||
|
|
||
|
return I2C_OK;
|
||
|
}
|
||
|
|
||
|
void i2c_master_isr_int(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
if (i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear ackfail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
|
||
|
/* refresh tx register */
|
||
|
i2c_refresh_txdt_register(handle->i2c_x);
|
||
|
|
||
|
if(handle->comm.pcount != 0)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ACKFAIL;
|
||
|
}
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_TDIS_FLAG) != RESET)
|
||
|
{
|
||
|
/* send data */
|
||
|
i2c_data_send(handle->i2c_x, *handle->comm.pbuff++);
|
||
|
handle->comm.pcount--;
|
||
|
handle->comm.psize--;
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_TCRLD_FLAG) != RESET)
|
||
|
{
|
||
|
if ((handle->comm.psize == 0) && (handle->comm.pcount != 0))
|
||
|
{
|
||
|
/* continue transfer */
|
||
|
i2c_start_transfer(handle, i2c_transfer_addr_get(handle->i2c_x), I2C_WITHOUT_START);
|
||
|
}
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_RDBF_FLAG) != RESET)
|
||
|
{
|
||
|
/* read data */
|
||
|
(*handle->comm.pbuff++) = i2c_data_receive(handle->i2c_x);
|
||
|
handle->comm.pcount--;
|
||
|
handle->comm.psize--;
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_TDC_FLAG) != RESET)
|
||
|
{
|
||
|
if (handle->comm.pcount == 0)
|
||
|
{
|
||
|
if (handle->i2c_x->ctrl2_bit.astopen == 0)
|
||
|
{
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_STOPF_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear stop flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_STOPF_FLAG);
|
||
|
|
||
|
/* reset ctrl2 register */
|
||
|
i2c_reset_ctrl2_register(handle->i2c_x);
|
||
|
|
||
|
if (i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear ackfail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
}
|
||
|
|
||
|
/* refresh tx dt register */
|
||
|
i2c_refresh_txdt_register(handle->i2c_x);
|
||
|
|
||
|
/* disable interrupts */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT | I2C_RD_INT, FALSE);
|
||
|
|
||
|
/* transfer complete */
|
||
|
handle->comm.status = I2C_END;
|
||
|
rt_completion_done(&handle->completion);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_master_isr_dma(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
if (i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear ackfail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
|
||
|
/* enable stop interrupt to wait for stop generate stop */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_STOP_INT, TRUE);
|
||
|
|
||
|
/* refresh tx dt register */
|
||
|
i2c_refresh_txdt_register(handle->i2c_x);
|
||
|
|
||
|
if(handle->comm.pcount != 0)
|
||
|
{
|
||
|
handle->comm.error_code = I2C_ERR_ACKFAIL;
|
||
|
}
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_TCRLD_FLAG) != RESET)
|
||
|
{
|
||
|
/* disable tdc interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_TDC_INT, FALSE);
|
||
|
|
||
|
if (handle->comm.pcount != 0)
|
||
|
{
|
||
|
/* continue transfer */
|
||
|
i2c_start_transfer(handle, i2c_transfer_addr_get(handle->i2c_x), I2C_WITHOUT_START);
|
||
|
|
||
|
/* enable dma request */
|
||
|
if(handle->comm.mode == I2C_DMA_MA_TX)
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_TX, TRUE);
|
||
|
else if(handle->comm.mode == I2C_DMA_MA_RX)
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_RX, TRUE);
|
||
|
}
|
||
|
}
|
||
|
else if (i2c_flag_get(handle->i2c_x, I2C_STOPF_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear stop flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_STOPF_FLAG);
|
||
|
|
||
|
/* reset ctrl2 register */
|
||
|
i2c_reset_ctrl2_register(handle->i2c_x);
|
||
|
|
||
|
if (i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
/* clear ackfail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
}
|
||
|
|
||
|
/* refresh tx dt register */
|
||
|
i2c_refresh_txdt_register(handle->i2c_x);
|
||
|
|
||
|
/* disable interrupts */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT | I2C_RD_INT, FALSE);
|
||
|
|
||
|
/* transfer complete */
|
||
|
handle->comm.status = I2C_END;
|
||
|
rt_completion_done(&handle->completion);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_evt_isr(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
switch(handle->comm.mode)
|
||
|
{
|
||
|
case I2C_INT_MA_TX:
|
||
|
case I2C_INT_MA_RX:
|
||
|
i2c_master_isr_int(handle);
|
||
|
break;
|
||
|
case I2C_DMA_MA_TX:
|
||
|
case I2C_DMA_MA_RX:
|
||
|
i2c_master_isr_dma(handle);
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static rt_ssize_t master_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num)
|
||
|
{
|
||
|
/* for dma may more stability */
|
||
|
#define DMA_TRANS_MIN_LEN 2 /* only buffer length >= DMA_TRANS_MIN_LEN will use DMA mode */
|
||
|
#define TRANS_TIMEOUT_PERSEC 8 /* per ms will trans nums bytes */
|
||
|
|
||
|
rt_int32_t i, ret;
|
||
|
struct rt_i2c_msg *msg = msgs;
|
||
|
struct rt_completion *completion;
|
||
|
rt_uint32_t timeout;
|
||
|
if (num == 0)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
RT_ASSERT((msgs != RT_NULL) && (bus != RT_NULL));
|
||
|
struct at32_i2c *instance = rt_container_of(bus, struct at32_i2c, i2c_bus);
|
||
|
completion = &instance->handle->completion;
|
||
|
|
||
|
LOG_D("xfer start %d mags", num);
|
||
|
for (i = 0; i < (num - 1); i++)
|
||
|
{
|
||
|
msg = &msgs[i];
|
||
|
LOG_D("xfer msgs[%d] addr=0x%2x buf=0x%x len= 0x%x flags= 0x%x", i, msg->addr, msg->buf, msg->len, msg->flags);
|
||
|
timeout = msg->len / TRANS_TIMEOUT_PERSEC + 2;
|
||
|
|
||
|
if (msg->flags & RT_I2C_RD)
|
||
|
{
|
||
|
if ((instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_RX) && (msg->len >= DMA_TRANS_MIN_LEN))
|
||
|
{
|
||
|
ret = i2c_master_receive_dma(instance->handle, (msg->addr << 1) , msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret = i2c_master_receive_int(instance->handle, (msg->addr << 1) , msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
if (ret != RT_EOK)
|
||
|
{
|
||
|
LOG_E("[%s:%d]i2c read error(%d)!\n", __func__, __LINE__, ret);
|
||
|
goto out;
|
||
|
}
|
||
|
if (rt_completion_wait(completion, timeout) != RT_EOK)
|
||
|
{
|
||
|
LOG_D("receive time out");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
if ((instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_TX) && (msg->len >= DMA_TRANS_MIN_LEN))
|
||
|
{
|
||
|
ret = i2c_master_transmit_dma(instance->handle, (msg->addr << 1) , msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret = i2c_master_transmit_int(instance->handle, (msg->addr << 1) , msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
if (ret != RT_EOK)
|
||
|
{
|
||
|
LOG_D("[%s:%d]i2c write error(%d)!\n", __func__, __LINE__, ret);
|
||
|
goto out;
|
||
|
}
|
||
|
if (rt_completion_wait(completion, timeout) != RT_EOK)
|
||
|
{
|
||
|
LOG_D("transmit time out");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
/* last msg */
|
||
|
msg = &msgs[i];
|
||
|
timeout = msg->len / TRANS_TIMEOUT_PERSEC + 2;
|
||
|
|
||
|
LOG_D("xfer last msgs[%d] addr=0x%2x buf= 0x%x len= 0x%x flags = 0x%x", i, msg->addr, msg->buf, msg->len, msg->flags);
|
||
|
if (msg->flags & RT_I2C_RD)
|
||
|
{
|
||
|
if ((instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_RX) && (msg->len >= DMA_TRANS_MIN_LEN))
|
||
|
{
|
||
|
ret = i2c_master_receive_dma(instance->handle, (msg->addr << 1), msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret = i2c_master_receive_int(instance->handle, (msg->addr << 1), msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
if (ret != RT_EOK)
|
||
|
{
|
||
|
LOG_D("[%s:%d]i2c read error(%d)!\n", __func__, __LINE__, ret);
|
||
|
goto out;
|
||
|
}
|
||
|
if (rt_completion_wait(completion, timeout) != RT_EOK)
|
||
|
{
|
||
|
LOG_D("receive time out");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
if ((instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_TX) && (msg->len >= DMA_TRANS_MIN_LEN))
|
||
|
{
|
||
|
ret = i2c_master_transmit_dma(instance->handle, (msg->addr << 1), msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret = i2c_master_transmit_int(instance->handle, (msg->addr << 1), msg->buf, msg->len, 0xFFFFFFFF);
|
||
|
}
|
||
|
if (ret != RT_EOK)
|
||
|
{
|
||
|
LOG_D("[%s:%d]i2c write error(%d)!\n", __func__, __LINE__, ret);
|
||
|
goto out;
|
||
|
}
|
||
|
if (rt_completion_wait(completion, timeout) != RT_EOK)
|
||
|
{
|
||
|
LOG_D("transmit time out");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
ret = num;
|
||
|
LOG_D("xfer end %d mags\r\n", num);
|
||
|
return ret;
|
||
|
|
||
|
out:
|
||
|
if(instance->handle->comm.error_code == I2C_ERR_ACKFAIL)
|
||
|
{
|
||
|
LOG_D("i2c nack error now stoped");
|
||
|
}
|
||
|
if(instance->handle->comm.error_code == I2C_ERR_INTERRUPT)
|
||
|
{
|
||
|
LOG_D("i2c bus error now stoped");
|
||
|
ret = i - 1;
|
||
|
}
|
||
|
/* generate stop */
|
||
|
i2c_stop_generate(instance->handle->i2c_x);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void _dma_base_channel_check(struct at32_i2c *instance)
|
||
|
{
|
||
|
dma_channel_type *rx_channel = instance->handle->dma_rx->dma_channel;
|
||
|
dma_channel_type *tx_channel = instance->handle->dma_tx->dma_channel;
|
||
|
|
||
|
if(instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_RX)
|
||
|
{
|
||
|
instance->handle->dma_rx->dma_done = RT_TRUE;
|
||
|
instance->handle->dma_rx->dma_x = (dma_type *)((rt_uint32_t)rx_channel & ~0xFF);
|
||
|
instance->handle->dma_rx->channel_index = ((((rt_uint32_t)rx_channel & 0xFF) - 8) / 0x14) + 1;
|
||
|
}
|
||
|
|
||
|
if(instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_TX)
|
||
|
{
|
||
|
instance->handle->dma_tx->dma_done = RT_TRUE;
|
||
|
instance->handle->dma_tx->dma_x = (dma_type *)((rt_uint32_t)tx_channel & ~0xFF);
|
||
|
instance->handle->dma_tx->channel_index = ((((rt_uint32_t)tx_channel & 0xFF) - 8) / 0x14) + 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void at32_i2c_dma_init(struct at32_i2c *instance)
|
||
|
{
|
||
|
dma_init_type dma_init_struct;
|
||
|
|
||
|
/* search dma base and channel index */
|
||
|
_dma_base_channel_check(instance);
|
||
|
|
||
|
/* config dma channel */
|
||
|
dma_default_para_init(&dma_init_struct);
|
||
|
dma_init_struct.peripheral_inc_enable = FALSE;
|
||
|
dma_init_struct.memory_inc_enable = TRUE;
|
||
|
dma_init_struct.peripheral_data_width = DMA_PERIPHERAL_DATA_WIDTH_BYTE;
|
||
|
dma_init_struct.memory_data_width = DMA_MEMORY_DATA_WIDTH_BYTE;
|
||
|
dma_init_struct.priority = DMA_PRIORITY_MEDIUM;
|
||
|
dma_init_struct.loop_mode_enable = FALSE;
|
||
|
|
||
|
if (instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_RX)
|
||
|
{
|
||
|
crm_periph_clock_enable(instance->handle->dma_rx->dma_clock, TRUE);
|
||
|
dma_init_struct.direction = DMA_DIR_PERIPHERAL_TO_MEMORY;
|
||
|
|
||
|
dma_reset(instance->handle->dma_rx->dma_channel);
|
||
|
dma_init(instance->handle->dma_rx->dma_channel, &dma_init_struct);
|
||
|
#if defined (SOC_SERIES_AT32F425)
|
||
|
dma_flexible_config(instance->handle->dma_rx->dma_x, instance->handle->dma_rx->flex_channel, \
|
||
|
(dma_flexible_request_type)instance->handle->dma_rx->request_id);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F402) || \
|
||
|
defined (SOC_SERIES_AT32F405) || defined (SOC_SERIES_AT32A423)
|
||
|
dmamux_enable(instance->handle->dma_rx->dma_x, TRUE);
|
||
|
dmamux_init(instance->handle->dma_rx->dmamux_channel, (dmamux_requst_id_sel_type)instance->handle->dma_rx->request_id);
|
||
|
#endif
|
||
|
/* dma irq should set in dma rx mode */
|
||
|
nvic_irq_enable(instance->handle->dma_rx->dma_irqn, 0, 1);
|
||
|
}
|
||
|
|
||
|
if (instance->handle->i2c_dma_flag & RT_DEVICE_FLAG_DMA_TX)
|
||
|
{
|
||
|
crm_periph_clock_enable(instance->handle->dma_tx->dma_clock, TRUE);
|
||
|
dma_init_struct.direction = DMA_DIR_MEMORY_TO_PERIPHERAL;
|
||
|
|
||
|
dma_reset(instance->handle->dma_tx->dma_channel);
|
||
|
dma_init(instance->handle->dma_tx->dma_channel, &dma_init_struct);
|
||
|
#if defined (SOC_SERIES_AT32F425)
|
||
|
dma_flexible_config(instance->handle->dma_tx->dma_x, instance->handle->dma_tx->flex_channel, \
|
||
|
(dma_flexible_request_type)instance->handle->dma_tx->request_id);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F402) || \
|
||
|
defined (SOC_SERIES_AT32F405) || defined (SOC_SERIES_AT32A423)
|
||
|
dmamux_enable(instance->handle->dma_tx->dma_x, TRUE);
|
||
|
dmamux_init(instance->handle->dma_tx->dmamux_channel, (dmamux_requst_id_sel_type)instance->handle->dma_tx->request_id);
|
||
|
#endif
|
||
|
/* dma irq should set in dma tx mode */
|
||
|
nvic_irq_enable(instance->handle->dma_tx->dma_irqn, 0, 1);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void i2c_err_isr(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
/* buserr */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_BUSERR_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_BUSERR_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
/* arlost */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_ARLOST_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ARLOST_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
/* ackfail */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_ACKFAIL_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
|
||
|
switch(handle->comm.mode)
|
||
|
{
|
||
|
case I2C_DMA_SLA_TX:
|
||
|
/* disable ack */
|
||
|
i2c_ack_enable(handle->i2c_x, FALSE);
|
||
|
|
||
|
/* disable evt interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT, FALSE);
|
||
|
|
||
|
/* transfer complete */
|
||
|
handle->comm.status = I2C_END;
|
||
|
break;
|
||
|
default:
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
/* ouf */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_OUF_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_OUF_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
/* pecerr */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_PECERR_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_PECERR_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
/* tmout */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_TMOUT_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_TMOUT_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
/* alertf */
|
||
|
if(i2c_flag_get(handle->i2c_x, I2C_ALERTF_FLAG) != RESET)
|
||
|
{
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ALERTF_FLAG);
|
||
|
|
||
|
handle->comm.error_code = I2C_ERR_INTERRUPT;
|
||
|
}
|
||
|
|
||
|
/* disable all interrupts */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_ERR_INT, FALSE);
|
||
|
}
|
||
|
|
||
|
void dma_isr(struct at32_i2c_handle *handle)
|
||
|
{
|
||
|
volatile rt_uint32_t reg_sts = 0, index = 0;
|
||
|
struct dma_config *dma = RT_NULL;
|
||
|
|
||
|
if(handle->comm.mode == I2C_DMA_MA_TX)
|
||
|
{
|
||
|
dma = handle->dma_tx;
|
||
|
}
|
||
|
else if(handle->comm.mode == I2C_DMA_MA_RX)
|
||
|
{
|
||
|
dma = handle->dma_rx;
|
||
|
}
|
||
|
|
||
|
reg_sts = dma->dma_x->sts;
|
||
|
index = dma->channel_index;
|
||
|
|
||
|
/* transfer complete */
|
||
|
if((reg_sts & (DMA_FDT_FLAG << (4 * (index - 1)))) != RESET)
|
||
|
{
|
||
|
/* clear dma flag */
|
||
|
dma->dma_x->clr |= (rt_uint32_t)((DMA_FDT_FLAG << (4 * (index - 1))) | \
|
||
|
(DMA_HDT_FLAG << (4 * (index - 1))));
|
||
|
/* disable the transfer complete interrupt */
|
||
|
dma_interrupt_enable(dma->dma_channel, DMA_FDT_INT, FALSE);
|
||
|
/* mark done */
|
||
|
dma->dma_done = RT_TRUE;
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
/* disable dma request */
|
||
|
i2c_dma_enable(handle->i2c_x, FALSE);
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
/* disable dma request */
|
||
|
if(handle->comm.mode == I2C_DMA_MA_TX)
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_TX, FALSE);
|
||
|
else if(handle->comm.mode == I2C_DMA_MA_RX)
|
||
|
i2c_dma_enable(handle->i2c_x, I2C_DMA_REQUEST_RX, FALSE);
|
||
|
#endif
|
||
|
/* disable dma channel */
|
||
|
dma_channel_enable(dma->dma_channel, FALSE);
|
||
|
|
||
|
switch(handle->comm.mode)
|
||
|
{
|
||
|
#if defined (SOC_SERIES_AT32F403A) || defined (SOC_SERIES_AT32F407) || \
|
||
|
defined (SOC_SERIES_AT32F413) || defined (SOC_SERIES_AT32F415) || \
|
||
|
defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32A403A)
|
||
|
case I2C_DMA_MA_TX:
|
||
|
/* enable tdc interrupt, generate stop condition in tdc interrupt */
|
||
|
handle->comm.pcount = 0;
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_EVT_INT, TRUE);
|
||
|
break;
|
||
|
case I2C_DMA_MA_RX:
|
||
|
/* clear ackfail flag */
|
||
|
i2c_flag_clear(handle->i2c_x, I2C_ACKFAIL_FLAG);
|
||
|
handle->comm.pcount = 0;
|
||
|
/* generate stop condtion */
|
||
|
i2c_stop_generate(handle->i2c_x);
|
||
|
|
||
|
/* transfer complete */
|
||
|
rt_completion_done(&handle->completion);
|
||
|
handle->comm.status = I2C_END;
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
#endif
|
||
|
#if defined (SOC_SERIES_AT32F402) || defined (SOC_SERIES_AT32F405) || \
|
||
|
defined (SOC_SERIES_AT32F423) || defined (SOC_SERIES_AT32F425) || \
|
||
|
defined (SOC_SERIES_AT32F435) || defined (SOC_SERIES_AT32F437) || \
|
||
|
defined (SOC_SERIES_AT32A423)
|
||
|
case I2C_DMA_MA_TX:
|
||
|
case I2C_DMA_MA_RX:
|
||
|
{
|
||
|
/* update the number of transfers */
|
||
|
handle->comm.pcount -= handle->comm.psize;
|
||
|
|
||
|
/* transfer complete */
|
||
|
if (handle->comm.pcount == 0)
|
||
|
{
|
||
|
/* enable stop interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_STOP_INT, TRUE);
|
||
|
}
|
||
|
/* the transfer has not been completed */
|
||
|
else
|
||
|
{
|
||
|
/* update the buffer pointer of transfers */
|
||
|
handle->comm.pbuff += handle->comm.psize;
|
||
|
|
||
|
/* set the number to be transferred */
|
||
|
if (handle->comm.pcount > MAX_TRANSFER_CNT)
|
||
|
{
|
||
|
handle->comm.psize = MAX_TRANSFER_CNT;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
handle->comm.psize = handle->comm.pcount;
|
||
|
}
|
||
|
|
||
|
/* config dma channel, continue to transfer data */
|
||
|
i2c_dma_config(handle, handle->comm.pbuff, handle->comm.psize);
|
||
|
|
||
|
/* enable tdc interrupt */
|
||
|
i2c_interrupt_enable(handle->i2c_x, I2C_TDC_INT, TRUE);
|
||
|
}
|
||
|
}
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
#endif
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#ifdef BSP_USING_HARD_I2C1
|
||
|
void I2C1_EVT_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_evt_isr(i2cs[I2C1_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
|
||
|
void I2C1_ERR_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_err_isr(i2cs[I2C1_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#if defined(BSP_I2C1_RX_USING_DMA)
|
||
|
void I2C1_RX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C1_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C1_RX_USING_DMA) */
|
||
|
#if defined(BSP_I2C1_TX_USING_DMA)
|
||
|
void I2C1_TX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C1_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C1_TX_USING_DMA) */
|
||
|
#endif
|
||
|
#ifdef BSP_USING_HARD_I2C2
|
||
|
void I2C2_EVT_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_evt_isr(i2cs[I2C2_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
|
||
|
void I2C2_ERR_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_err_isr(i2cs[I2C2_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#if defined(BSP_I2C2_RX_USING_DMA)
|
||
|
void I2C2_RX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C2_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C2_RX_USING_DMA) */
|
||
|
#if defined(BSP_I2C2_TX_USING_DMA)
|
||
|
void I2C2_TX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C2_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C2_TX_USING_DMA) */
|
||
|
#endif
|
||
|
#ifdef BSP_USING_HARD_I2C3
|
||
|
void I2C3_EVT_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_evt_isr(i2cs[I2C3_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
|
||
|
void I2C3_ERR_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
i2c_err_isr(i2cs[I2C3_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#if defined(BSP_I2C3_RX_USING_DMA)
|
||
|
void I2C3_RX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C3_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C3_RX_USING_DMA) */
|
||
|
#if defined(BSP_I2C3_TX_USING_DMA)
|
||
|
void I2C3_TX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
/* enter interrupt */
|
||
|
rt_interrupt_enter();
|
||
|
|
||
|
dma_isr(i2cs[I2C3_INDEX].handle);
|
||
|
|
||
|
/* leave interrupt */
|
||
|
rt_interrupt_leave();
|
||
|
}
|
||
|
#endif /* defined(BSP_I2C3_TX_USING_DMA) */
|
||
|
#endif
|
||
|
|
||
|
#if defined (SOC_SERIES_AT32F421) || defined (SOC_SERIES_AT32F425)
|
||
|
void I2C1_TX_RX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
#if defined(BSP_USING_HARD_I2C1) && defined(BSP_I2C1_TX_USING_DMA)
|
||
|
I2C1_TX_DMA_IRQHandler();
|
||
|
#endif
|
||
|
|
||
|
#if defined(BSP_USING_HARD_I2C1) && defined(BSP_I2C1_RX_USING_DMA)
|
||
|
I2C1_RX_DMA_IRQHandler();
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
void I2C2_TX_RX_DMA_IRQHandler(void)
|
||
|
{
|
||
|
#if defined(BSP_USING_HARD_I2C2) && defined(BSP_I2C2_TX_USING_DMA)
|
||
|
I2C2_TX_DMA_IRQHandler();
|
||
|
#endif
|
||
|
|
||
|
#if defined(BSP_USING_HARD_I2C2) && defined(BSP_I2C2_RX_USING_DMA)
|
||
|
I2C2_RX_DMA_IRQHandler();
|
||
|
#endif
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static void at32_i2c_get_dma_config(void)
|
||
|
{
|
||
|
#ifdef BSP_USING_HARD_I2C1
|
||
|
i2c_handle[I2C1_INDEX].i2c_dma_flag = 0;
|
||
|
#ifdef BSP_I2C1_RX_USING_DMA
|
||
|
i2c_handle[I2C1_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
|
||
|
static struct dma_config i2c1_dma_rx = I2C1_RX_DMA_CONFIG;
|
||
|
i2c_handle[I2C1_INDEX].dma_rx = &i2c1_dma_rx;
|
||
|
#endif
|
||
|
#ifdef BSP_I2C1_TX_USING_DMA
|
||
|
i2c_handle[I2C1_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
|
||
|
static struct dma_config i2c1_dma_tx = I2C1_TX_DMA_CONFIG;
|
||
|
i2c_handle[I2C1_INDEX].dma_tx = &i2c1_dma_tx;
|
||
|
#endif
|
||
|
#endif
|
||
|
|
||
|
#ifdef BSP_USING_HARD_I2C2
|
||
|
i2c_handle[I2C2_INDEX].i2c_dma_flag = 0;
|
||
|
#ifdef BSP_I2C2_RX_USING_DMA
|
||
|
i2c_handle[I2C2_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
|
||
|
static struct dma_config i2c2_dma_rx = I2C2_RX_DMA_CONFIG;
|
||
|
i2c_handle[I2C2_INDEX].dma_rx = &i2c2_dma_rx;
|
||
|
#endif
|
||
|
#ifdef BSP_I2C2_TX_USING_DMA
|
||
|
i2c_handle[I2C2_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
|
||
|
static struct dma_config i2c2_dma_tx = I2C2_TX_DMA_CONFIG;
|
||
|
i2c_handle[I2C2_INDEX].dma_tx = &i2c2_dma_tx;
|
||
|
#endif
|
||
|
#endif
|
||
|
|
||
|
#ifdef BSP_USING_HARD_I2C3
|
||
|
i2c_handle[I2C3_INDEX].i2c_dma_flag = 0;
|
||
|
#ifdef BSP_I2C3_RX_USING_DMA
|
||
|
i2c_handle[I2C3_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
|
||
|
static struct dma_config i2c3_dma_rx = I2C3_RX_DMA_CONFIG;
|
||
|
i2c_handle[I2C3_INDEX].dma_rx = &i2c3_dma_rx;
|
||
|
#endif
|
||
|
#ifdef BSP_I2C3_TX_USING_DMA
|
||
|
i2c_handle[I2C3_INDEX].i2c_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
|
||
|
static struct dma_config i2c3_dma_tx = I2C3_TX_DMA_CONFIG;
|
||
|
i2c_handle[I2C3_INDEX].dma_tx = &i2c3_dma_tx;
|
||
|
#endif
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
int rt_hw_hwi2c_init(void)
|
||
|
{
|
||
|
int i;
|
||
|
rt_err_t result;
|
||
|
rt_size_t obj_num = sizeof(i2c_handle) / sizeof(i2c_handle[0]);
|
||
|
|
||
|
at32_i2c_get_dma_config();
|
||
|
|
||
|
for (i = 0; i < obj_num; i++)
|
||
|
{
|
||
|
i2cs[i].handle = &i2c_handle[i];
|
||
|
i2cs[i].i2c_bus.ops = &at32_i2c_ops;
|
||
|
|
||
|
if(i2cs[i].handle->i2c_dma_flag & (RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX))
|
||
|
{
|
||
|
at32_i2c_dma_init(&i2cs[i]);
|
||
|
}
|
||
|
rt_completion_init(&i2cs[i].handle->completion);
|
||
|
at32_i2c_configure(&(i2cs[i].i2c_bus));
|
||
|
result = rt_i2c_bus_device_register(&(i2cs[i].i2c_bus), i2cs[i].handle->i2c_name);
|
||
|
}
|
||
|
|
||
|
return result;
|
||
|
}
|
||
|
|
||
|
INIT_BOARD_EXPORT(rt_hw_hwi2c_init);
|
||
|
|
||
|
#endif
|