libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/gd32/arm/gd32470z-lckfb/template.ewp

1893 lines
50 KiB
Plaintext
Raw Normal View History

[GD32]add gd32470z-lckfb (#7022) * --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格
2023-03-11 12:21:31 +08:00
<?xml version="1.0" encoding="iso-8859-1"?>
<project>
<fileVersion>2</fileVersion>
<configuration>
<name>Debug</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>build\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>build\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>build\List</state>
</option>
<option>
<name>Variant</name>
<version>21</version>
<state>39</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>Output variant</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>Output description</name>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>5</version>
<state>7</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>2</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
</option>
<option>
<name>OGProductVersion</name>
<state>7.40.2.8567</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>7.40.2.8567</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>GD32F450xK GD GD32F450xK</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>1</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>1</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>21</version>
<state>39</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>21</version>
<state>39</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>1</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>31</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCDefines</name>
<state>USE_STDPERIPH_DRIVER</state>
<state>GD32F4XX</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state></state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>00000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>1</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccCppDialect</name>
<state>1</state>
</option>
<option>
<name>IccExceptions</name>
<state>1</state>
</option>
<option>
<name>IccRTTI</name>
<state>1</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state></state>
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state></state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>project.srec</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>rtthread.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>1</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>1</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>1</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>1</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>1</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>__iar_program_start</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>1</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>1</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>1</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>0</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state></state>
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state></state>
</option>
<option>
<name>CrcAlgorithm</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
<configuration>
<name>Release</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>0</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>ExePath</name>
<state>Release\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>Release\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>Variant</name>
<version>21</version>
<state>0</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state></state>
</option>
<option>
<name>Output variant</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>Output description</name>
<state></state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>5</version>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state></state>
</option>
<option>
<name>OGProductVersion</name>
<state>7.40.2.8567</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state></state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state></state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state></state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>21</version>
<state>1</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>21</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>31</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCDefines</name>
<state>NDEBUG</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state></state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>11111110</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>0</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state></state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state></state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccCppDialect</name>
<state>1</state>
</option>
<option>
<name>IccExceptions</name>
<state>1</state>
</option>
<option>
<name>IccRTTI</name>
<state>1</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state></state>
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state></state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state></state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state></state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
<hasPrio>0</hasPrio>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state></state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state></state>
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state></state>
</option>
<option>
<name>CrcAlgorithm</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
</project>