libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imx6ul/platform/include/mx6ul/irq_numbers.h

214 lines
12 KiB
C
Raw Normal View History

[BSP] add i.MX 6UL BSP
2017-11-01 13:30:17 +08:00
/*
* Copyright (c) 2012, Freescale Semiconductor, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#if !defined(__IRQ_NUMBERS_H__)
#define __IRQ_NUMBERS_H__
////////////////////////////////////////////////////////////////////////////////
// Definitions
////////////////////////////////////////////////////////////////////////////////
//! @brief i.MX6 interrupt numbers.
//!
//! This enumeration lists the numbers for all of the interrupts available on the i.MX6 series.
//! Use these numbers when specifying an interrupt to the GIC.
//!
//! The first 16 interrupts are special in that they are reserved for software interrupts generated
//! by the SWI instruction.
enum _imx_interrupts
{
SW_INTERRUPT_0 = 0, //!< Software interrupt 0.
SW_INTERRUPT_1 = 1, //!< Software interrupt 1.
SW_INTERRUPT_2 = 2, //!< Software interrupt 2.
SW_INTERRUPT_3 = 3, //!< Software interrupt 3.
SW_INTERRUPT_4 = 4, //!< Software interrupt 4.
SW_INTERRUPT_5 = 5, //!< Software interrupt 5.
SW_INTERRUPT_6 = 6, //!< Software interrupt 6.
SW_INTERRUPT_7 = 7, //!< Software interrupt 7.
SW_INTERRUPT_8 = 8, //!< Software interrupt 8.
SW_INTERRUPT_9 = 9, //!< Software interrupt 9.
SW_INTERRUPT_10 = 10, //!< Software interrupt 10.
SW_INTERRUPT_11 = 11, //!< Software interrupt 11.
SW_INTERRUPT_12 = 12, //!< Software interrupt 12.
SW_INTERRUPT_13 = 13, //!< Software interrupt 13.
SW_INTERRUPT_14 = 14, //!< Software interrupt 14.
SW_INTERRUPT_15 = 15, //!< Software interrupt 15.
RSVD_INTERRUPT_16 = 16, //!< Reserved.
RSVD_INTERRUPT_17 = 17, //!< Reserved.
RSVD_INTERRUPT_18 = 18, //!< Reserved.
RSVD_INTERRUPT_19 = 19, //!< Reserved.
RSVD_INTERRUPT_20 = 20, //!< Reserved.
RSVD_INTERRUPT_21 = 21, //!< Reserved.
RSVD_INTERRUPT_22 = 22, //!< Reserved.
RSVD_INTERRUPT_23 = 23, //!< Reserved.
RSVD_INTERRUPT_24 = 24, //!< Reserved.
RSVD_INTERRUPT_25 = 25, //!< Reserved.
RSVD_INTERRUPT_26 = 26, //!< Reserved.
RSVD_INTERRUPT_27 = 27, //!< Reserved.
RSVD_INTERRUPT_28 = 28, //!< Reserved.
RSVD_INTERRUPT_29 = 29, //!< Reserved.
RSVD_INTERRUPT_30 = 30, //!< Reserved.
RSVD_INTERRUPT_31 = 31, //!< Reserved.
IMX_INT_IOMUXC_GPR = 32, //!< General Purpose Register 1 from IOMUXC. Used to notify cores on exception condition while boot.
IMX_INT_CHEETAH_CSYSPWRUPREQ = 33, //!< @todo Listed as DAP in RM
IMX_INT_SDMA = 34, //!< Logical OR of all 48 SDMA interrupt requests/events from all channels.
IMX_INT_TSC = 35, //!< TSC
IMX_INT_SNVS_LP_SET_PWR_OFF = 36, //!< PMIC power off request.
IMX_INT_LCDIF = 37, //!< LCDIF interrupt request.
IMX_INT_BEE = 38, //!< BEE interrupt request.
IMX_INT_CSI = 39, //!< CMOS Sensor Interface interrupt request.
IMX_INT_PXP = 40, //!< PXP interrupt request.
IMX_INT_SCTR1 = 41, //!< SCTR1
IMX_INT_SCTR2 = 42, //!< SCTR2
IMX_INT_WDOG3 = 43, //!< WDOG3 timer reset interrupt request.
IMX_INT_INTERRUPT_44 = 44, //!< Reserved.
IMX_INT_APBH_DMA = 45, //!< APBH DMA
IMX_INT_EIM = 46, //!< EIM interrupt request.
IMX_INT_NAND_BCH = 47, //!< Reserved.
IMX_INT_NAND_GPMI = 48, //!< Reserved.
IMX_INT_UART6 = 49, //!< Logical OR of UART5 interrupt requests.
IMX_INT_INTERRUPT_50 = 50, //!< Reserved.
IMX_INT_SNVS = 51, //!< SNVS consolidated interrupt.
IMX_INT_SNVS_SEC = 52, //!< SNVS security interrupt.
IMX_INT_CSU = 53, //!< CSU interrupt request 1. Indicates to the processor that one or more alarm inputs were asserted.
IMX_INT_USDHC1 = 54, //!< uSDHC1 (Enhanced SDHC) interrupt request.
IMX_INT_USDHC2 = 55, //!< uSDHC2 (Enhanced SDHC) interrupt request.
IMX_INT_SAI3 = 56, //!< uSDHC3 (Enhanced SDHC) interrupt request.
IMX_INT_SAI4 = 57, //!< uSDHC4 (Enhanced SDHC) interrupt request.
IMX_INT_UART1 = 58, //!< Logical OR of UART1 interrupt requests.
IMX_INT_UART2 = 59, //!< Logical OR of UART2 interrupt requests.
IMX_INT_UART3 = 60, //!< Logical OR of UART3 interrupt requests.
IMX_INT_UART4 = 61, //!< Logical OR of UART4 interrupt requests.
IMX_INT_UART5 = 62, //!< Logical OR of UART5 interrupt requests.
IMX_INT_ECSPI1 = 63, //!< eCSPI1 interrupt request.
IMX_INT_ECSPI2 = 64, //!< eCSPI2 interrupt request.
IMX_INT_ECSPI3 = 65, //!< eCSPI3 interrupt request.
IMX_INT_ECSPI4 = 66, //!< eCSPI4 interrupt request.
IMX_INT_I2C4 = 67, //!< Reserved.
IMX_INT_I2C1 = 68, //!< I2C1 interrupt request.
IMX_INT_I2C2 = 69, //!< I2C2 interrupt request.
IMX_INT_I2C3 = 70, //!< I2C3 interrupt request.
IMX_INT_UART7 = 71, //!< Logical OR of UART5 interrupt requests.
IMX_INT_UART8 = 72, //!< Logical OR of UART5 interrupt requests.
IMX_INT_INTERRUPT_73 = 73, //!< Reserved.
IMX_INT_USB_OTG2 = 74, //!< USB Host 1 interrupt request.
IMX_INT_USB_OTG1 = 75, //!< USB OTG1 interrupt request.
IMX_INT_USB_UTMI0 = 76, //!< UTMI0 interrupt request.
IMX_INT_USB_UTMI1 = 77, //!< UTMI1 interrupt request.
IMX_INT_CAAM_JQ2 = 78, //!< SSI1 interrupt request.
IMX_INT_CAAM_ERR = 79, //!< SSI2 interrupt request.
IMX_INT_CAAM_RTIC = 80, //!< SSI3 interrupt request.
IMX_INT_TEMPERATURE = 81, //!< Temperature Sensor (temp. greater than threshold) interrupt request.
IMX_INT_ASRC = 82, //!< Reserved.
IMX_INT_INTERRUPT_83 = 83, //!< Reserved.
IMX_INT_SPDIF = 84, //!< Logical OR of SPDIF TX and SPDIF RX interrupts.
IMX_INT_INTERRUPT_85 = 85, //!< Reserved.
IMX_INT_PMU_ANA_BO = 86, //!< PMU analog regulator brown-out interrupt request.
IMX_INT_GPT1 = 87, //
IMX_INT_EPIT1 = 88, //!< EPIT1 output compare interrupt.
IMX_INT_EPIT2 = 89, //!< EPIT2 output compare interrupt.
IMX_INT_GPIO1_INT7 = 90, //!< INT7 interrupt request.
IMX_INT_GPIO1_INT6 = 91, //!< INT6 interrupt request.
IMX_INT_GPIO1_INT5 = 92, //!< INT5 interrupt request.
IMX_INT_GPIO1_INT4 = 93, //!< INT4 interrupt request.
IMX_INT_GPIO1_INT3 = 94, //!< INT3 interrupt request.
IMX_INT_GPIO1_INT2 = 95, //!< INT2 interrupt request.
IMX_INT_GPIO1_INT1 = 96, //!< INT1 interrupt request.
IMX_INT_GPIO1_INT0 = 97, //!< INT0 interrupt request.
IMX_INT_GPIO1_INT15_0 = 98, //!< Combined interrupt indication for GPIO1 signals 0 - 15.
IMX_INT_GPIO1_INT31_16 = 99, //!< Combined interrupt indication for GPIO1 signals 16 - 31.
IMX_INT_GPIO2_INT15_0 = 100, //!< Combined interrupt indication for GPIO2 signals 0 - 15.
IMX_INT_GPIO2_INT31_16 = 101, //!< Combined interrupt indication for GPIO2 signals 16 - 31.
IMX_INT_GPIO3_INT15_0 = 102, //!< Combined interrupt indication for GPIO3 signals 0 - 15.
IMX_INT_GPIO3_INT31_16 = 103, //!< Combined interrupt indication for GPIO3 signals 16 - 31.
IMX_INT_GPIO4_INT15_0 = 104, //!< Combined interrupt indication for GPIO4 signals 0 - 15.
IMX_INT_GPIO4_INT31_16 = 105, //!< Combined interrupt indication for GPIO4 signals 16 - 31.
IMX_INT_GPIO5_INT15_0 = 106, //!< Combined interrupt indication for GPIO5 signals 0 - 15.
IMX_INT_GPIO5_INT31_16 = 107, //!< Combined interrupt indication for GPIO5 signals 16 - 31.
IMX_INT_INTERRUPT_108 = 108, //!< Reserved.
IMX_INT_INTERRUPT_109 = 109, //!< Reserved.
IMX_INT_INTERRUPT_110 = 110, //!< Reserved.
IMX_INT_INTERRUPT_111 = 111, //!< Reserved.
IMX_INT_WDOG1 = 112, //!< WDOG1 timer reset interrupt request.
IMX_INT_WDOG2 = 113, //!< WDOG2 timer reset interrupt request.
IMX_INT_KPP = 114, //!< Key Pad interrupt request.
IMX_INT_PWM1 = 115, //!< Cumulative interrupt line for PWM1. Logical OR of rollover, compare, and FIFO waterlevel crossing interrupts.
IMX_INT_PWM2 = 116, //!< Cumulative interrupt line for PWM2. Logical OR of rollover, compare, and FIFO waterlevel crossing interrupts.
IMX_INT_PWM3 = 117, //!< Cumulative interrupt line for PWM3. Logical OR of rollover, compare, and FIFO waterlevel crossing interrupts.
IMX_INT_PWM4 = 118, //!< Cumulative interrupt line for PWM4. Logical OR of rollover, compare, and FIFO waterlevel crossing interrupts.
IMX_INT_CCM_INT1 = 119, //!< CCM interrupt request 1.
IMX_INT_CCM_INT2 = 120, //!< CCM interrupt request 2.
IMX_INT_GPC_INT1 = 121, //!< GPC interrupt request 1.
IMX_INT_INTERRUPT_122 = 122, //!< Reserved.
IMX_INT_SRC = 123, //!< SRC interrupt request.
IMX_INT_INTERRUPT_124 = 124, //!< Logical OR of all L2 interrupt requests.
IMX_INT_INTERRUPT_125 = 125, //!< Parity Check error interrupt request.
IMX_INT_CHEETAH_PERFORM = 126, //!< Logical OR of Performance Unit interrupts.
IMX_INT_CHEETAH_TRIGGER = 127, //!< Logical OR of CTI trigger outputs.
IMX_INT_SRC_CPU_WDOG = 128, //!< Combined CPU wdog interrupts (4x) out of SRC.
IMX_INT_SAI1 = 129, //!< EPDC interrupt request.
IMX_INT_SAI2 = 130, //!< EPDC interrupt request.
IMX_INT_INTERRUPT_131 = 131, //!< DCP general interrupt request.
IMX_INT_ADC1 = 132, //!< DCP channel 0 interrupt request.
IMX_INT_ADC2 = 133, //!< DCP secure interrupt request.
IMX_INT_INTERRUPT_134 = 134, //!< Reserved.
IMX_INT_INTERRUPT_135 = 135, //!< Reserved.
IMX_INT_SJC = 136, //!< SJC interrupt from General Purpose register.
IMX_INT_CAAM_0 = 137, //!< Reserved.
IMX_INT_CAAM_1 = 138, //!< Reserved.
IMX_INT_QSPI = 139, //!< Reserved.
IMX_INT_TZASC1 = 140, //!< ASC1 interrupt request.
IMX_INT_GPT2 = 141, //!< Reserved.
IMX_INT_CAN1 = 142, //!< Reserved.
IMX_INT_CAN2 = 143, //!< Reserved.
IMX_INT_SIM1 = 144, //!< Reserved.
IMX_INT_SIM2 = 145, //!< Reserved.
IMX_INT_PWM5 = 146, //!< Fast Ethernet Controller interrupt request.
IMX_INT_PWM6 = 147, //!< Reserved.
IMX_INT_PWM7 = 148, //!< Reserved.
IMX_INT_PWM8 = 149, //!< Reserved.
IMX_INT_ENET1 = 150, //!< Reserved.
IMX_INT_ENET1_TIMER = 151, //!< Reserved.
IMX_INT_ENET2 = 152, //!< Reserved.
IMX_INT_ENET2_TIMER = 153, //!< Reserved.
IMX_INT_INTERRUPT_154 = 154, //!< Reserved.
IMX_INT_INTERRUPT_155 = 155, //!< Reserved.
IMX_INT_INTERRUPT_156 = 156, //!< Reserved.
IMX_INT_INTERRUPT_157 = 157, //!< Reserved.
IMX_INT_INTERRUPT_158 = 158, //!< Reserved.
IMX_INT_PMU_DIG_BO = 159, //!< //!< PMU digital regulator brown-out interrupt request.
IMX_INTERRUPT_COUNT = 160 //!< Total number of interrupts.
};
#endif // __IRQ_NUMBERS_H__
////////////////////////////////////////////////////////////////////////////////
// EOF
////////////////////////////////////////////////////////////////////////////////