399 lines
11 KiB
C
399 lines
11 KiB
C
|
/*
|
||
|
|
* File : usart.c
|
||
|
|
* This file is part of RT-Thread RTOS
|
||
|
|
* COPYRIGHT (C) 2006, RT-Thread Development Team
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License as published by
|
||
|
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
|
* (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License along
|
||
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||
|
|
*
|
||
|
|
* Change Logs:
|
||
|
|
* Date Author Notes
|
||
|
|
* 2011-01-13 weety first version
|
||
|
|
* 2013-07-21 weety using serial component
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <rtthread.h>
|
||
|
|
#include <rthw.h>
|
||
|
|
#include <at91sam9g45.h>
|
||
|
|
#include <rtdevice.h>
|
||
|
|
|
||
|
|
|
||
|
|
struct at91_uart {
|
||
|
|
AT91S_USART *port;
|
||
|
|
int irq;
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* This function will handle serial port interrupt
|
||
|
|
*/
|
||
|
|
void rt_at91_usart_handler(int vector, void *param)
|
||
|
|
{
|
||
|
|
int status;
|
||
|
|
struct at91_uart *uart;
|
||
|
|
rt_device_t dev = (rt_device_t)param;
|
||
|
|
uart = (struct at91_uart *)dev->user_data;
|
||
|
|
status = uart->port->US_CSR;
|
||
|
|
if (!(status & uart->port->US_IMR)) /* check actived and enabled interrupt */
|
||
|
|
{
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
rt_interrupt_enter();
|
||
|
|
rt_hw_serial_isr((struct rt_serial_device *)dev, RT_SERIAL_EVENT_RX_IND);
|
||
|
|
rt_interrupt_leave();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* UART device in RT-Thread
|
||
|
|
*/
|
||
|
|
static rt_err_t at91_usart_configure(struct rt_serial_device *serial,
|
||
|
|
struct serial_configure *cfg)
|
||
|
|
{
|
||
|
|
int div;
|
||
|
|
int mode = 0;
|
||
|
|
struct at91_uart *uart;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
RT_ASSERT(cfg != RT_NULL);
|
||
|
|
uart = (struct at91_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
uart->port->US_CR = AT91C_US_RSTTX | AT91C_US_RSTRX |
|
||
|
|
AT91C_US_RXDIS | AT91C_US_TXDIS;
|
||
|
|
mode |= AT91C_US_USMODE_NORMAL | AT91C_US_CLKS_CLOCK |
|
||
|
|
AT91C_US_CHMODE_NORMAL;
|
||
|
|
switch (cfg->data_bits)
|
||
|
|
{
|
||
|
|
case DATA_BITS_8:
|
||
|
|
mode |= AT91C_US_CHRL_8_BITS;
|
||
|
|
break;
|
||
|
|
case DATA_BITS_7:
|
||
|
|
mode |= AT91C_US_CHRL_7_BITS;
|
||
|
|
break;
|
||
|
|
case DATA_BITS_6:
|
||
|
|
mode |= AT91C_US_CHRL_6_BITS;
|
||
|
|
break;
|
||
|
|
case DATA_BITS_5:
|
||
|
|
mode |= AT91C_US_CHRL_5_BITS;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
mode |= AT91C_US_CHRL_8_BITS;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
switch (cfg->stop_bits)
|
||
|
|
{
|
||
|
|
case STOP_BITS_2:
|
||
|
|
mode |= AT91C_US_NBSTOP_2_BIT;
|
||
|
|
break;
|
||
|
|
case STOP_BITS_1:
|
||
|
|
default:
|
||
|
|
mode |= AT91C_US_NBSTOP_1_BIT;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
switch (cfg->parity)
|
||
|
|
{
|
||
|
|
case PARITY_ODD:
|
||
|
|
mode |= AT91C_US_PAR_ODD;
|
||
|
|
break;
|
||
|
|
case PARITY_EVEN:
|
||
|
|
mode |= AT91C_US_PAR_EVEN;
|
||
|
|
break;
|
||
|
|
case PARITY_NONE:
|
||
|
|
default:
|
||
|
|
mode |= AT91C_US_PAR_NONE;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
uart->port->US_MR = mode;
|
||
|
|
/* Assume OVER is cleared and fractional baudrate generator is disabled */
|
||
|
|
div = (clk_get_rate(clk_get("mck")) / 16 + cfg->baud_rate/2) / cfg->baud_rate;
|
||
|
|
uart->port->US_BRGR = div;
|
||
|
|
uart->port->US_CR = AT91C_US_RXEN | AT91C_US_TXEN;
|
||
|
|
uart->port->US_IER = AT91C_US_RXRDY;
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
static rt_err_t at91_usart_control(struct rt_serial_device *serial,
|
||
|
|
int cmd, void *arg)
|
||
|
|
{
|
||
|
|
struct at91_uart* uart;
|
||
|
|
|
||
|
|
RT_ASSERT(serial != RT_NULL);
|
||
|
|
uart = (struct at91_uart *)serial->parent.user_data;
|
||
|
|
|
||
|
|
switch (cmd)
|
||
|
|
{
|
||
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
||
|
|
/* disable rx irq */
|
||
|
|
rt_hw_interrupt_mask(uart->irq);
|
||
|
|
break;
|
||
|
|
case RT_DEVICE_CTRL_SET_INT:
|
||
|
|
/* enable rx irq */
|
||
|
|
rt_hw_interrupt_umask(uart->irq);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return RT_EOK;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int at91_usart_putc(struct rt_serial_device *serial, char c)
|
||
|
|
{
|
||
|
|
//rt_uint32_t level;
|
||
|
|
struct at91_uart *uart = serial->parent.user_data;
|
||
|
|
|
||
|
|
while (!(uart->port->US_CSR & AT91C_US_TXRDY));
|
||
|
|
uart->port->US_THR = c;
|
||
|
|
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int at91_usart_getc(struct rt_serial_device *serial)
|
||
|
|
{
|
||
|
|
int result;
|
||
|
|
struct at91_uart *uart = serial->parent.user_data;
|
||
|
|
|
||
|
|
if (uart->port->US_CSR & AT91C_US_RXRDY)
|
||
|
|
{
|
||
|
|
result = uart->port->US_RHR & 0xff;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
result = -1;
|
||
|
|
}
|
||
|
|
|
||
|
|
return result;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct rt_uart_ops at91_usart_ops =
|
||
|
|
{
|
||
|
|
at91_usart_configure,
|
||
|
|
at91_usart_control,
|
||
|
|
at91_usart_putc,
|
||
|
|
at91_usart_getc,
|
||
|
|
};
|
||
|
|
|
||
|
|
#if defined(RT_USING_DBGU)
|
||
|
|
static struct rt_serial_device serial_dbgu;
|
||
|
|
struct at91_uart dbgu = {
|
||
|
|
(AT91PS_USART)AT91C_BASE_DBGU,
|
||
|
|
AT91C_ID_SYS
|
||
|
|
};
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
static struct rt_serial_device serial0;
|
||
|
|
struct at91_uart uart0 = {
|
||
|
|
AT91C_BASE_US0,
|
||
|
|
AT91C_ID_US0
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
static struct rt_serial_device serial1;
|
||
|
|
struct at91_uart uart1 = {
|
||
|
|
AT91C_BASE_US1,
|
||
|
|
AT91C_ID_US1
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART2)
|
||
|
|
static struct rt_serial_device serial2;
|
||
|
|
struct at91_uart uart2 = {
|
||
|
|
AT91C_BASE_US2,
|
||
|
|
AT91C_ID_US2
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART3)
|
||
|
|
static struct rt_serial_device serial3;
|
||
|
|
struct at91_uart uart3 = {
|
||
|
|
AT91C_BASE_US3,
|
||
|
|
AT91C_ID_US3
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
void at91_usart_gpio_init(void)
|
||
|
|
{
|
||
|
|
#ifdef RT_USING_DBGU
|
||
|
|
#define DRXD 12 // DBGU rx as Peripheral A on PB12
|
||
|
|
#define DTXD 13 // DBGU tx as Peripheral A on PB13
|
||
|
|
AT91C_BASE_PIOB->PIO_IDR, (1<<DRXD)|(1<<DTXD); // Disables the Input Change Interrupt on the I/O line
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUDR, (1<<DRXD)|(1<<DTXD); // Disables the pull up resistor on the I/O line
|
||
|
|
AT91C_BASE_PIOB->PIO_ASR, (1<<DRXD)|(1<<DTXD); // Assigns the I/O line to the Peripheral A function
|
||
|
|
AT91C_BASE_PIOB->PIO_PDR, (1<<DRXD)|(1<<DTXD); // enables peripheral control of the pin
|
||
|
|
AT91C_BASE_PMC->PMC_PCER, 1 << AT91C_ID_SYS;
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef RT_USING_UART0
|
||
|
|
#define RXD0 18 // UART0 rx as Peripheral A on PB18
|
||
|
|
#define TXD0 19 // UART0 tx as Peripheral A on PB19
|
||
|
|
AT91C_BASE_PMC->PMC_PCER, 1 << AT91C_ID_US0;
|
||
|
|
AT91C_BASE_PIOB->PIO_IDR, (1<<RXD0)|(1<<TXD0);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUER, (1<<RXD0);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUDR, (1<<TXD0);
|
||
|
|
AT91C_BASE_PIOB->PIO_ASR, (1<<RXD0)|(1<<TXD0);
|
||
|
|
AT91C_BASE_PIOB->PIO_PDR, (1<<RXD0)|(1<<TXD0);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef RT_USING_UART1
|
||
|
|
#define TXD1 4 // UART1 tx as Peripheral A on PB4
|
||
|
|
#define RXD1 5 // UART1 rx as Peripheral A on PB5
|
||
|
|
AT91C_BASE_PMC->PMC_PCER, 1 << AT91C_ID_US1;
|
||
|
|
AT91C_BASE_PIOB->PIO_IDR, (1<<RXD1)|(1<<TXD1);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUER, (1<<RXD1);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUDR, (1<<TXD1);
|
||
|
|
AT91C_BASE_PIOB->PIO_ASR, (1<<RXD1)|(1<<TXD1);
|
||
|
|
AT91C_BASE_PIOB->PIO_PDR, (1<<RXD1)|(1<<TXD1);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef RT_USING_UART2
|
||
|
|
#define TXD2 6 // UART2 tx as Peripheral A on PB6
|
||
|
|
#define RXD2 7 // UART2 rx as Peripheral A on PB7
|
||
|
|
AT91C_BASE_PMC->PMC_PCER, 1 << AT91C_ID_US2;
|
||
|
|
AT91C_BASE_PIOB->PIO_IDR, (1<<RXD2)|(1<<TXD2);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUER, (1<<RXD2);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUDR, (1<<TXD2);
|
||
|
|
AT91C_BASE_PIOB->PIO_ASR, (1<<RXD2)|(1<<TXD2);
|
||
|
|
AT91C_BASE_PIOB->PIO_PDR, (1<<RXD2)|(1<<TXD2);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef RT_USING_UART3
|
||
|
|
#define TXD3 8 // UART3 tx as Peripheral A on PB8
|
||
|
|
#define RXD3 9 // UART3 rx as Peripheral A on PB9
|
||
|
|
AT91C_BASE_PMC->PMC_PCER, 1<<AT91C_ID_US3;
|
||
|
|
AT91C_BASE_PIOB->PIO_IDR, (1<<RXD3)|(1<<TXD3);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUER, (1<<RXD3);
|
||
|
|
AT91C_BASE_PIOB->PIO_PPUDR, (1<<TXD3);
|
||
|
|
AT91C_BASE_PIOB->PIO_ASR, (1<<RXD3)|(1<<TXD3);
|
||
|
|
AT91C_BASE_PIOB->PIO_PDR, (1<<RXD3)|(1<<TXD3);
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* This function will handle init uart
|
||
|
|
*/
|
||
|
|
int rt_hw_uart_init(void)
|
||
|
|
{
|
||
|
|
at91_usart_gpio_init();
|
||
|
|
|
||
|
|
#if defined(RT_USING_DBGU)
|
||
|
|
serial_dbgu.ops = &at91_usart_ops;
|
||
|
|
serial_dbgu.config.baud_rate = BAUD_RATE_115200;
|
||
|
|
serial_dbgu.config.bit_order = BIT_ORDER_LSB;
|
||
|
|
serial_dbgu.config.data_bits = DATA_BITS_8;
|
||
|
|
serial_dbgu.config.parity = PARITY_NONE;
|
||
|
|
serial_dbgu.config.stop_bits = STOP_BITS_1;
|
||
|
|
serial_dbgu.config.invert = NRZ_NORMAL;
|
||
|
|
serial_dbgu.config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||
|
|
|
||
|
|
/* register vcom device */
|
||
|
|
rt_hw_serial_register(&serial_dbgu, "dbgu",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
||
|
|
&dbgu);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART0)
|
||
|
|
serial0.ops = &at91_usart_ops;
|
||
|
|
serial0.config.baud_rate = BAUD_RATE_115200;
|
||
|
|
serial0.config.bit_order = BIT_ORDER_LSB;
|
||
|
|
serial0.config.data_bits = DATA_BITS_8;
|
||
|
|
serial0.config.parity = PARITY_NONE;
|
||
|
|
serial0.config.stop_bits = STOP_BITS_1;
|
||
|
|
serial0.config.invert = NRZ_NORMAL;
|
||
|
|
serial0.config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||
|
|
|
||
|
|
/* register vcom device */
|
||
|
|
rt_hw_serial_register(&serial0, "uart0",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
|
||
|
|
&uart0);
|
||
|
|
rt_hw_interrupt_install(uart0.irq, rt_at91_usart_handler,
|
||
|
|
(void *)&(serial0.parent), "UART0");
|
||
|
|
rt_hw_interrupt_umask(uart0.irq);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART1)
|
||
|
|
serial1.ops = &at91_usart_ops;
|
||
|
|
serial1.config.baud_rate = BAUD_RATE_115200;
|
||
|
|
serial1.config.bit_order = BIT_ORDER_LSB;
|
||
|
|
serial1.config.data_bits = DATA_BITS_8;
|
||
|
|
serial1.config.parity = PARITY_NONE;
|
||
|
|
serial1.config.stop_bits = STOP_BITS_1;
|
||
|
|
serial1.config.invert = NRZ_NORMAL;
|
||
|
|
serial1.config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||
|
|
|
||
|
|
/* register vcom device */
|
||
|
|
rt_hw_serial_register(&serial1, "uart1",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
||
|
|
&uart1);
|
||
|
|
rt_hw_interrupt_install(uart1.irq, rt_at91_usart_handler,
|
||
|
|
(void *)&(serial1.parent), "UART1");
|
||
|
|
rt_hw_interrupt_umask(uart1.irq);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART2)
|
||
|
|
serial2.ops = &at91_usart_ops;
|
||
|
|
serial2.config.baud_rate = BAUD_RATE_115200;
|
||
|
|
serial2.config.bit_order = BIT_ORDER_LSB;
|
||
|
|
serial2.config.data_bits = DATA_BITS_8;
|
||
|
|
serial2.config.parity = PARITY_NONE;
|
||
|
|
serial2.config.stop_bits = STOP_BITS_1;
|
||
|
|
serial2.config.invert = NRZ_NORMAL;
|
||
|
|
serial2.config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||
|
|
|
||
|
|
/* register vcom device */
|
||
|
|
rt_hw_serial_register(&serial2, "uart2",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
||
|
|
&uart2);
|
||
|
|
rt_hw_interrupt_install(uart2.irq, rt_at91_usart_handler,
|
||
|
|
(void *)&(serial2.parent), "UART2");
|
||
|
|
rt_hw_interrupt_umask(uart2.irq);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if defined(RT_USING_UART3)
|
||
|
|
serial3.ops = &at91_usart_ops;
|
||
|
|
serial3.config.baud_rate = BAUD_RATE_115200;
|
||
|
|
serial3.config.bit_order = BIT_ORDER_LSB;
|
||
|
|
serial3.config.data_bits = DATA_BITS_8;
|
||
|
|
serial3.config.parity = PARITY_NONE;
|
||
|
|
serial3.config.stop_bits = STOP_BITS_1;
|
||
|
|
serial3.config.invert = NRZ_NORMAL;
|
||
|
|
serial3.config.bufsz = RT_SERIAL_RB_BUFSZ;
|
||
|
|
|
||
|
|
/* register vcom device */
|
||
|
|
rt_hw_serial_register(&serial3, "uart3",
|
||
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
||
|
|
&uart3);
|
||
|
|
rt_hw_interrupt_install(uart3.irq, rt_at91_usart_handler,
|
||
|
|
(void *)&(serial3.parent), "UART3");
|
||
|
|
rt_hw_interrupt_umask(uart3.irq);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
INIT_BOARD_EXPORT(rt_hw_uart_init);
|
||
|
|
|
||
|
|
#ifdef RT_USING_DBGU
|
||
|
|
void rt_dbgu_isr(void)
|
||
|
|
{
|
||
|
|
rt_at91_usart_handler(dbgu.irq, &(serial_dbgu.parent));
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|