libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/cvitek/cv18xx_risc-v/Kconfig

77 lines
1.3 KiB
Plaintext
Raw Normal View History

[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
mainmenu "RT-Thread Project Configuration"
bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句
2024-06-11 12:16:39 +08:00
BSP_DIR := .
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句
2024-06-11 12:16:39 +08:00
RTT_DIR := ../../..
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句
2024-06-11 12:16:39 +08:00
PKGS_DIR := packages
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句
2024-06-11 12:16:39 +08:00
source "$(RTT_DIR)/Kconfig"
osource "$PKGS_DIR/Kconfig"
rsource "board/Kconfig"
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
support cv181x-riscv for RT-SMART (#8724)
2024-04-03 07:37:45 +08:00
config BSP_USING_CV18XX
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
bool
select ARCH_RISCV64
[bps][duo] set RT_USING_SYSTEM_WORKQUEUE by default
2023-11-01 23:10:13 +08:00
select RT_USING_SYSTEM_WORKQUEUE
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
select RT_USING_COMPONENTS_INIT
select RT_USING_USER_MAIN
select RT_USING_CACHE
select ARCH_MM_MMU
fix bl808-d0 && cv1800b compile error (#8513)
2024-01-28 16:05:52 +08:00
select RT_USING_DEVICE_OPS
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
default y
config C906_PLIC_PHY_ADDR
hex
default 0x70000000
config IRQ_MAX_NR
int
default 64
config TIMER_CLK_FREQ
int
default 25000000
update gpio driver
2024-05-24 00:13:11 +08:00
config GPIO_IRQ_BASE
int
default 60
config SYS_GPIO_IRQ_BASE
int
default 70
[bsp]add cv1800b (#7753)
2023-06-30 00:05:55 +08:00
config __STACKSIZE__
int "stack size for interrupt"
default 4096
support cv181x c906_little (#8680)
2024-03-28 23:35:54 +08:00
Accumulated patchsets for bsp/cvitek (#8968) * bsp: cvitek: kconfig: add wdt for cv18xx_riscv Add Watchdog timer in Kconfig. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * drv: cvitek: remove using macro from source file Building of source file should be controlled by SConscript, but not in source file itself. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add i2c for cv18xx_riscv Add I2C in Kconfig for c906B. Note, the IRQ# is different from that of c906L. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add rtc for cv18xx_riscv Add RTC in Kconfig for c906B. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: fix channel issue for pwm driver The original code confuses the concepts of controllers and channels. Fixed it and do some code cleanup. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for cv18xx_riscv Pinmux in driver code is controlled by SOC type, bcos driver code should be general and support all pins defined by SoC. Pinmux configuration in Kconfig is controlled by BOARD type, bcos when we operate on board, it does not expose all chip-level pin signals and we can only use part of them. Following is I2C signals exported by duo family. Details see https://milkv.io/docs/duo/overview. Note: we have not added support for duo-S. Duo === NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo 256m ======== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo S ===== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> * bsp:cvitek: remove using macro from source file for i2c Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: unify menu message text for i2c as other drivers Other dirvers has no extra word "HW". Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for c906_little Porting what we have done in commit "bsp:cvitek: add i2c pinmux config for cv18xx_riscv" to c906_little. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> --------- Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
config SOC_TYPE_CV180X
bool
default n
config SOC_TYPE_SG2002
bool
default n
support cv181x c906_little (#8680)
2024-03-28 23:35:54 +08:00
choice
prompt "Board Type"
support cv181x-riscv for RT-SMART (#8724)
2024-04-03 07:37:45 +08:00
default BOARD_TYPE_MILKV_DUO256M
support cv181x c906_little (#8680)
2024-03-28 23:35:54 +08:00
config BOARD_TYPE_MILKV_DUO
Accumulated patchsets for bsp/cvitek (#8968) * bsp: cvitek: kconfig: add wdt for cv18xx_riscv Add Watchdog timer in Kconfig. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * drv: cvitek: remove using macro from source file Building of source file should be controlled by SConscript, but not in source file itself. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add i2c for cv18xx_riscv Add I2C in Kconfig for c906B. Note, the IRQ# is different from that of c906L. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add rtc for cv18xx_riscv Add RTC in Kconfig for c906B. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: fix channel issue for pwm driver The original code confuses the concepts of controllers and channels. Fixed it and do some code cleanup. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for cv18xx_riscv Pinmux in driver code is controlled by SOC type, bcos driver code should be general and support all pins defined by SoC. Pinmux configuration in Kconfig is controlled by BOARD type, bcos when we operate on board, it does not expose all chip-level pin signals and we can only use part of them. Following is I2C signals exported by duo family. Details see https://milkv.io/docs/duo/overview. Note: we have not added support for duo-S. Duo === NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo 256m ======== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo S ===== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> * bsp:cvitek: remove using macro from source file for i2c Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: unify menu message text for i2c as other drivers Other dirvers has no extra word "HW". Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for c906_little Porting what we have done in commit "bsp:cvitek: add i2c pinmux config for cv18xx_riscv" to c906_little. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> --------- Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
select SOC_TYPE_CV180X
support cv181x c906_little (#8680)
2024-03-28 23:35:54 +08:00
bool "milkv-duo"
support cv181x-riscv for RT-SMART (#8724)
2024-04-03 07:37:45 +08:00
support cvitek bsp spinor flash
2024-04-09 22:48:57 +08:00
config BOARD_TYPE_MILKV_DUO_SPINOR
Accumulated patchsets for bsp/cvitek (#8968) * bsp: cvitek: kconfig: add wdt for cv18xx_riscv Add Watchdog timer in Kconfig. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * drv: cvitek: remove using macro from source file Building of source file should be controlled by SConscript, but not in source file itself. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add i2c for cv18xx_riscv Add I2C in Kconfig for c906B. Note, the IRQ# is different from that of c906L. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add rtc for cv18xx_riscv Add RTC in Kconfig for c906B. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: fix channel issue for pwm driver The original code confuses the concepts of controllers and channels. Fixed it and do some code cleanup. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for cv18xx_riscv Pinmux in driver code is controlled by SOC type, bcos driver code should be general and support all pins defined by SoC. Pinmux configuration in Kconfig is controlled by BOARD type, bcos when we operate on board, it does not expose all chip-level pin signals and we can only use part of them. Following is I2C signals exported by duo family. Details see https://milkv.io/docs/duo/overview. Note: we have not added support for duo-S. Duo === NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo 256m ======== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo S ===== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> * bsp:cvitek: remove using macro from source file for i2c Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: unify menu message text for i2c as other drivers Other dirvers has no extra word "HW". Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for c906_little Porting what we have done in commit "bsp:cvitek: add i2c pinmux config for cv18xx_riscv" to c906_little. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> --------- Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
select SOC_TYPE_CV180X
support cvitek bsp spinor flash
2024-04-09 22:48:57 +08:00
bool "milkv-duo-spinor"
support cv181x-riscv for RT-SMART (#8724)
2024-04-03 07:37:45 +08:00
config BOARD_TYPE_MILKV_DUO256M
Accumulated patchsets for bsp/cvitek (#8968) * bsp: cvitek: kconfig: add wdt for cv18xx_riscv Add Watchdog timer in Kconfig. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * drv: cvitek: remove using macro from source file Building of source file should be controlled by SConscript, but not in source file itself. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add i2c for cv18xx_riscv Add I2C in Kconfig for c906B. Note, the IRQ# is different from that of c906L. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add rtc for cv18xx_riscv Add RTC in Kconfig for c906B. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: fix channel issue for pwm driver The original code confuses the concepts of controllers and channels. Fixed it and do some code cleanup. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for cv18xx_riscv Pinmux in driver code is controlled by SOC type, bcos driver code should be general and support all pins defined by SoC. Pinmux configuration in Kconfig is controlled by BOARD type, bcos when we operate on board, it does not expose all chip-level pin signals and we can only use part of them. Following is I2C signals exported by duo family. Details see https://milkv.io/docs/duo/overview. Note: we have not added support for duo-S. Duo === NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo 256m ======== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo S ===== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> * bsp:cvitek: remove using macro from source file for i2c Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: unify menu message text for i2c as other drivers Other dirvers has no extra word "HW". Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for c906_little Porting what we have done in commit "bsp:cvitek: add i2c pinmux config for cv18xx_riscv" to c906_little. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> --------- Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
select SOC_TYPE_SG2002
support cv181x-riscv for RT-SMART (#8724)
2024-04-03 07:37:45 +08:00
bool "milkv-duo256m"
support cvitek bsp spinor flash
2024-04-09 22:48:57 +08:00
config BOARD_TYPE_MILKV_DUO256M_SPINOR
Accumulated patchsets for bsp/cvitek (#8968) * bsp: cvitek: kconfig: add wdt for cv18xx_riscv Add Watchdog timer in Kconfig. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * drv: cvitek: remove using macro from source file Building of source file should be controlled by SConscript, but not in source file itself. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add i2c for cv18xx_riscv Add I2C in Kconfig for c906B. Note, the IRQ# is different from that of c906L. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: kconfig: add rtc for cv18xx_riscv Add RTC in Kconfig for c906B. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp: cvitek: fix channel issue for pwm driver The original code confuses the concepts of controllers and channels. Fixed it and do some code cleanup. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for cv18xx_riscv Pinmux in driver code is controlled by SOC type, bcos driver code should be general and support all pins defined by SoC. Pinmux configuration in Kconfig is controlled by BOARD type, bcos when we operate on board, it does not expose all chip-level pin signals and we can only use part of them. Following is I2C signals exported by duo family. Details see https://milkv.io/docs/duo/overview. Note: we have not added support for duo-S. Duo === NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo 256m ======== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA Duo S ===== NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME> ---- --- ------------ --------------------- J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> * bsp:cvitek: remove using macro from source file for i2c Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: unify menu message text for i2c as other drivers Other dirvers has no extra word "HW". Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * bsp:cvitek: add i2c pinmux config for c906_little Porting what we have done in commit "bsp:cvitek: add i2c pinmux config for cv18xx_riscv" to c906_little. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> --------- Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: flyingcys <flyingcys@163.com> Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
select SOC_TYPE_SG2002
support cvitek bsp spinor flash
2024-04-09 22:48:57 +08:00
bool "milkv-duo256m-spinor"
support cv181x c906_little (#8680)
2024-03-28 23:35:54 +08:00
endchoice