56 lines
2.4 KiB
Markdown
56 lines
2.4 KiB
Markdown
|
# RK3568 BSP Introduction
|
||
|
|
|
||
|
|
[中文页](README_zh.md) | English
|
||
|
|
|
||
|
|
## 1. Introduction
|
||
|
|
|
||
|
|
RK3568 is a general-purpose SOC, quad-core 64-bit Cortex-A55 processor, with 22nm lithography process, has frequency up to 2.0GHz and Mali G52 GPU, support 4K decoding and 1080P encoding. Support mangy interfaces such as SATA/PCIE/USB3.0, an 0.8T NPU for lightweight AI applications. Support dual Gigabit Ethernet ports, LPDDR4 memory, etc.
|
||
|
|
|
||
|
|
This project ported RT-Thread on RK3568, you can use the RADXA ROCK 3A version of the RK3568 in low-priced, which can even replace the Raspberry Pi 4B.
|
||
|
|
|
||
|
|
## 2. Compiling
|
||
|
|
|
||
|
|
Usage ARM Developer GNU ToolChain, it support Linux and Windows:
|
||
|
|
```
|
||
|
|
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads/
|
||
|
|
```
|
||
|
|
Download the `xxx-aarch64-none-elf` of x86_64 hosted platform, set the `RTT_EXEC_PATH` is system environment after decompress the binary.
|
||
|
|
|
||
|
|
Enter directory `rt-thread/bsp/qemu-virt64-aarch64` and input:
|
||
|
|
```
|
||
|
|
scons
|
||
|
|
```
|
||
|
|
|
||
|
|
## 3. Execution
|
||
|
|
|
||
|
|
RK3568 has different Kernel install methods according to different boardsit, recommend to install into the SD card: ([Official](https://wiki.t-firefly.com/en/ROC-RK3568-PC/hardware_doc.html)|[RADXA ROCK 3A](https://wiki.radxa.com/Rock3/install/microSD)).
|
||
|
|
|
||
|
|
After install Kernel, storage the `rtthread.bin` to EFI partition (the second partition), and add this line in the front of `boot.cmd` in this partition:
|
||
|
|
```shell
|
||
|
|
fatload mmc 1:1 0x208000 /rtthread.bin;dcache flush;go 0x208000
|
||
|
|
```
|
||
|
|
After modifying the script, build a binary script `boot.scr ` in this partition:
|
||
|
|
```shell
|
||
|
|
# Install the uboot-mkimage package on Linux, or use MSYS2 to install the u-boot-tools package on Windows
|
||
|
|
mkimage -C none -A arm -T script -d boot.cmd boot.scr
|
||
|
|
```
|
||
|
|
|
||
|
|
According to different boards, the serial port can support up to UART0~9, this project uses UART2 ([Official](https://wiki.t-firefly.com/en/ROC-RK3568-PC/debug.html)|[RADXA ROCK 3A](https://wiki.radxa.com/Rock3/dev/serial-console)) by default, the baud rate is 1500000, please make sure that the serial port used supports this baud rate.
|
||
|
|
|
||
|
|
```
|
||
|
|
heap: [0x002663f0 - 0x042663f0]
|
||
|
|
|
||
|
|
\ | /
|
||
|
|
- RT - Thread Operating System
|
||
|
|
/ | \ 4.1.0 build Mar 19 2022 17:17:29
|
||
|
|
2006 - 2022 Copyright by RT-Thread team
|
||
|
|
Hi, this is RT-Thread!!
|
||
|
|
msh />
|
||
|
|
```
|
||
|
|
|
||
|
|
## 4. Condition
|
||
|
|
|
||
|
|
| Driver | Condition | Remark |
|
||
|
|
| ------ | --------- | ------ |
|
||
|
|
| UART | Support | UART0~9 |
|