rt-thread-official/bsp/imxrt/imxrt1052-atk-commander/board/MCUX_Config/pin_mux.h

183 lines
11 KiB
C
Raw Normal View History

2019-06-12 15:01:12 +08:00
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
#ifndef _PIN_MUX_H_
#define _PIN_MUX_H_
/***********************************************************************************************************************
* Definitions
**********************************************************************************************************************/
/*! @brief Direction type */
typedef enum _pin_mux_direction
{
kPIN_MUX_DirectionInput = 0U, /* Input direction */
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
} pin_mux_direction_t;
/*!
* @addtogroup pin_mux
* @{
*/
/***********************************************************************************************************************
* API
**********************************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Calls initialization functions.
*
*/
void BOARD_InitBootPins(void);
/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
#define BOARD_INITPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */
#define BOARD_INITPINS_UART1_RXD_SIGNAL RX /*!< LPUART1 signal: RX */
/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
#define BOARD_INITPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */
#define BOARD_INITPINS_UART1_TXD_SIGNAL TX /*!< LPUART1 signal: TX */
/* GPIO_SD_B1_03 (coord M4), FlexSPI_D0_B */
#define BOARD_INITPINS_FlexSPI_D0_B_GPIO GPIO3 /*!< GPIO device name: GPIO3 */
#define BOARD_INITPINS_FlexSPI_D0_B_PORT GPIO3 /*!< PORT device name: GPIO3 */
#define BOARD_INITPINS_FlexSPI_D0_B_PIN 3U /*!< GPIO3 pin index: 3 */
/* PMIC_ON_REQ (coord K7), PMIC_ON_REQ */
#define BOARD_INITPINS_PMIC_ON_REQ_GPIO GPIO5 /*!< GPIO device name: GPIO5 */
#define BOARD_INITPINS_PMIC_ON_REQ_PORT GPIO5 /*!< PORT device name: GPIO5 */
#define BOARD_INITPINS_PMIC_ON_REQ_PIN 1U /*!< GPIO5 pin index: 1 */
/* GPIO_AD_B0_05 (coord G14), CAN_STBY/BOOT_MODE[1]/Flash_RST/U12[8] */
#define BOARD_INITPINS_CAN_STBY_GPIO GPIO1 /*!< GPIO device name: GPIO1 */
#define BOARD_INITPINS_CAN_STBY_PORT GPIO1 /*!< PORT device name: GPIO1 */
#define BOARD_INITPINS_CAN_STBY_PIN 5U /*!< GPIO1 pin index: 5 */
/* GPIO_EMC_40 (coord A7), ENET_MDC */
#define BOARD_INITPINS_ENET_MDC_GPIO GPIO3 /*!< GPIO device name: GPIO3 */
#define BOARD_INITPINS_ENET_MDC_PORT GPIO3 /*!< PORT device name: GPIO3 */
#define BOARD_INITPINS_ENET_MDC_PIN 26U /*!< GPIO3 pin index: 26 */
/* GPIO_B0_00 (coord D7), LCDIF_CLK */
#define BOARD_INITPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< LCDIF signal: lcdif_clk */
/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
#define BOARD_INITPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D0_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D0_CHANNEL 0U /*!< LCDIF lcdif_data channel: 00 */
/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
#define BOARD_INITPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D1_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D1_CHANNEL 1U /*!< LCDIF lcdif_data channel: 01 */
/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
#define BOARD_INITPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D2_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D2_CHANNEL 2U /*!< LCDIF lcdif_data channel: 02 */
/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
#define BOARD_INITPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D4_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D4_CHANNEL 4U /*!< LCDIF lcdif_data channel: 04 */
/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
#define BOARD_INITPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D3_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D3_CHANNEL 3U /*!< LCDIF lcdif_data channel: 03 */
/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
#define BOARD_INITPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D5_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D5_CHANNEL 5U /*!< LCDIF lcdif_data channel: 05 */
/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
#define BOARD_INITPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D6_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D6_CHANNEL 6U /*!< LCDIF lcdif_data channel: 06 */
/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
#define BOARD_INITPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D7_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D7_CHANNEL 7U /*!< LCDIF lcdif_data channel: 07 */
/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
#define BOARD_INITPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D8_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D8_CHANNEL 8U /*!< LCDIF lcdif_data channel: 08 */
/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
#define BOARD_INITPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D9_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D9_CHANNEL 9U /*!< LCDIF lcdif_data channel: 09 */
/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
#define BOARD_INITPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D10_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D10_CHANNEL 10U /*!< LCDIF lcdif_data channel: 10 */
/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
#define BOARD_INITPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D11_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D11_CHANNEL 11U /*!< LCDIF lcdif_data channel: 11 */
/* GPIO_B1_00 (coord A11), LCDIF_D12 */
#define BOARD_INITPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D12_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D12_CHANNEL 12U /*!< LCDIF lcdif_data channel: 12 */
/* GPIO_B1_01 (coord B11), LCDIF_D13 */
#define BOARD_INITPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D13_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D13_CHANNEL 13U /*!< LCDIF lcdif_data channel: 13 */
/* GPIO_B1_02 (coord C11), LCDIF_D14 */
#define BOARD_INITPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D14_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D14_CHANNEL 14U /*!< LCDIF lcdif_data channel: 14 */
/* GPIO_B1_03 (coord D11), LCDIF_D15 */
#define BOARD_INITPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_D15_SIGNAL lcdif_data /*!< LCDIF signal: lcdif_data */
#define BOARD_INITPINS_LCDIF_D15_CHANNEL 15U /*!< LCDIF lcdif_data channel: 15 */
/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
#define BOARD_INITPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< LCDIF signal: lcdif_enable */
/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
#define BOARD_INITPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< LCDIF signal: lcdif_hsync */
/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
#define BOARD_INITPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Device name: LCDIF */
#define BOARD_INITPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< LCDIF signal: lcdif_vsync */
/*!
* @brief Configures pin routing and optionally pin electrical features.
*
*/
void BOARD_InitPins(void);
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif /* _PIN_MUX_H_ */
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/