libs/rt-thread-official
libs/rt-thread-official
4
0
Fork 0
mirror of https://github.com/RT-Thread/rt-thread.git synced 2025-03-04 21:15:47 +08:00
Code Issues Releases Wiki Activity
rt-thread-official/bsp/lpc55sxx/Libraries/LPC55S6X/middleware/sdmmc/src/fsl_sd.c

1983 lines
65 KiB
C
Raw Normal View History

added LPC55S6x BSP
2019-10-24 17:56:09 +08:00
/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_sd.h"
/*******************************************************************************
* Prototypes
******************************************************************************/
/*!
* @brief Wait write process complete.
*
* @param card Card descriptor.
* @retval kStatus_Timeout Send command timeout.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_WaitWriteComplete(sd_card_t *card);
/*!
* @brief send write success blocks.
*
* @param card Card descriptor.
* @param blocks blocks number wirte successed
* @retval kStatus_SDMMC_TransferFailed Send command failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SendWriteSuccessBlocks(sd_card_t *card, uint32_t *blocks);
/*!
* @brief Send SEND_APPLICATION_COMMAND command.
*
* @param card Card descriptor.
* @param relativeaddress
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_SDMMC_CardNotSupport Card doesn't support.
* @retval kStatus_Success Operate successfully.
*/
static status_t inline SD_SendApplicationCmd(sd_card_t *card, uint32_t relativeAddress);
/*!
* @brief Send GO_IDLE command to set the card to be idle state.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t inline SD_GoIdle(sd_card_t *card);
/*!
* @brief Send STOP_TRANSMISSION command after multiple blocks read/write.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_StopTransmission(sd_card_t *card);
/*!
* @brief Send SET_BLOCK_SIZE command.
*
* @param card Card descriptor.
* @param blockSize Block size.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t inline SD_SetBlockSize(sd_card_t *card, uint32_t blockSize);
/*!
* @brief Send GET_RCA command to get card relative address.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SendRca(sd_card_t *card);
/*!
* @brief Send SWITCH_FUNCTION command to switch the card function group.
*
* @param card Card descriptor.
* @param mode 0 to check function group. 1 to switch function group
* @param group Function group
* @param number Function number in the function group.
* @param status Switch function status.
* @retval kStatus_SDMMC_SetCardBlockSizeFailed Set card block size failed.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SwitchFunction(sd_card_t *card, uint32_t mode, uint32_t group, uint32_t number, uint32_t *status);
/*!
* @brief Decode raw SCR register content in the data blocks.
*
* @param card Card descriptor.
* @param rawScr Raw SCR register content.
*/
static void SD_DecodeScr(sd_card_t *card, uint32_t *rawScr);
/*!
* @brief Send GET_SCR command.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_SendApplicationCommandFailed Send application command failed.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_SDMMC_NotSupportYet Not support yet.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SendScr(sd_card_t *card);
/*!
* @brief Switch the card to be high speed mode.
*
* @param card Card descriptor.
* @param group Group number.
* @param functio Function number.
* @retval kStatus_SDMMC_CardNotSupport Card not support.
* @retval kStatus_SDMMC_SwitchFailed Switch failed.
* @retval kStatus_SDMMC_NotSupportYet Not support yet.
* @retval kStatus_Fail Switch failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SelectFunction(sd_card_t *card, uint32_t group, uint32_t function);
/*!
* @brief Send SET_DATA_WIDTH command to set SD bus width.
*
* @param card Card descriptor.
* @param width Data bus width.
* @retval kStatus_SDMMC_SendApplicationCommandFailed Send application command failed.
* @retval kStatus_InvalidArgument Invalid argument.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SetDataBusWidth(sd_card_t *card, sd_data_bus_width_t width);
/*!
* @brief Decode raw CSD register content in the data blocks.
*
* @param card Card descriptor.
* @param rawCsd Raw CSD register content.
*/
static void SD_DecodeCsd(sd_card_t *card, uint32_t *rawCsd);
/*!
* @brief Send SEND_CSD command to get CSD register content from Card.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SendCsd(sd_card_t *card);
/*!
* @brief Decode raw CID register content in the data blocks.
*
* @param rawCid raw CID register content.
* @param card Card descriptor.
*/
static void SD_DecodeCid(sd_card_t *card, uint32_t *rawCid);
/*!
* @brief Send GET_CID command to get CID from card.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_AllSendCid(sd_card_t *card);
/*!
* @brief Send SEND_OPERATION_CONDITION command.
*
* This function sends host capacity support information and asks the accessed card to send its operating condition
* register content.
*
* @param card Card descriptor.
* @param argument The argument of the send operation condition ncomamnd.
* @retval kStatus_SDMMC_SendApplicationCommandFailed Send application command failed.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Timeout Timeout.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_ApplicationSendOperationCondition(sd_card_t *card, uint32_t argument);
/*!
* @brief Send GET_INTERFACE_CONDITION command to get card interface condition.
*
* This function checks card interface condition, which includes host supply voltage information and asks the card
* whether card supports the specified host voltage.
*
* @param card Card descriptor.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_SDMMC_CardNotSupport Card doesn't support.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_SendInterfaceCondition(sd_card_t *card);
/*!
* @brief Send switch voltage command
* switch card voltage to 1.8v
*
* @param card Card descriptor.
*/
static status_t SD_SwitchVoltage(sd_card_t *card);
/*!
* @brief select bus timing
* select card timing
* @param card Card descriptor.
*/
static status_t SD_SelectBusTiming(sd_card_t *card);
/*!
* @brief Decode sd 512 bit status
* @param card Card descriptor.
* @param 512 bits satus raw data.
*/
static void SD_DecodeStatus(sd_card_t *card, uint32_t *src);
/*!
* @brief Read data from specific SD card.
*
* @param card Card descriptor.
* @param buffer Buffer to save data blocks read.
* @param startBlock Card start block number to be read.
* @param blockSize Block size.
* @param blockCount Block count.
* @retval kStatus_SDMMC_CardNotSupport Card doesn't support.
* @retval kStatus_SDMMC_WaitWriteCompleteFailed Wait write complete failed.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_SDMMC_StopTransmissionFailed Stop transmission failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_Read(sd_card_t *card, uint8_t *buffer, uint32_t startBlock, uint32_t blockSize, uint32_t blockCount);
/*!
* @brief Write data to specific card
*
* @param card Card descriptor.
* @param buffer Buffer to be sent.
* @param startBlock Card start block number to be written.
* @param blockSize Block size.
* @param blockCount Block count.
* @param blockWritten successfully write blocks
* @retval kStatus_SDMMC_CardNotSupport Card doesn't support.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_SDMMC_StopTransmissionFailed Stop transmission failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_Write(sd_card_t *card,
const uint8_t *buffer,
uint32_t startBlock,
uint32_t blockSize,
uint32_t blockCount,
uint32_t *blockWritten);
/*!
* @brief Erase data for the given block range.
*
* @param card Card descriptor.
* @param startBlock Card start block number to be erased.
* @param blockCount The block count to be erased.
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
*/
static status_t SD_Erase(sd_card_t *card, uint32_t startBlock, uint32_t blockCount);
/*!
* @brief card transfer function.
*
* @param card Card descriptor.
* @param content Transfer content.
* @param retry Retry times
* @retval kStatus_SDMMC_TransferFailed Transfer failed.
* @retval kStatus_Success Operate successfully.
* @retval kStatus_SDMMC_TuningFail tuning fail
*/
static status_t SD_Transfer(sd_card_t *card, SDMMCHOST_TRANSFER *content, uint32_t retry);
/*!
* @brief card execute tuning function.
*
* @param card Card descriptor.
* @retval kStatus_Success Operate successfully.
* @retval kStatus_SDMMC_TuningFail tuning fail.
* @retval kStatus_SDMMC_TransferFailed transfer fail
*/
static status_t inline SD_ExecuteTuning(sd_card_t *card);
/*******************************************************************************
* Variables
******************************************************************************/
/* g_sdmmc statement */
extern uint32_t g_sdmmc[SDK_SIZEALIGN(SDMMC_GLOBAL_BUFFER_SIZE, SDMMC_DATA_BUFFER_ALIGN_CACHE)];
static uint32_t s_sdAuSizeMap[] = {0,
16 * 1024,
32 * 1024,
64 * 1024,
128 * 1024,
256 * 1024,
512 * 1024,
1024 * 1024,
2 * 1024 * 1024,
4 * 1024 * 1024,
8 * 1024 * 1024,
12 * 1024 * 1024,
16 * 1024 * 1024,
24 * 1024 * 1024,
32 * 1024 * 1024,
64 * 1024 * 1024};
/*******************************************************************************
* Code
******************************************************************************/
static status_t inline SD_SendApplicationCmd(sd_card_t *card, uint32_t relativeAddress)
{
assert(card);
return SDMMC_SendApplicationCommand(card->host.base, card->host.transfer, relativeAddress);
}
static status_t inline SD_GoIdle(sd_card_t *card)
{
assert(card);
return SDMMC_GoIdle(card->host.base, card->host.transfer);
}
static status_t inline SD_SetBlockSize(sd_card_t *card, uint32_t blockSize)
{
assert(card);
return SDMMC_SetBlockSize(card->host.base, card->host.transfer, blockSize);
}
static status_t inline SD_ExecuteTuning(sd_card_t *card)
{
assert(card);
return SDMMC_ExecuteTuning(card->host.base, card->host.transfer, kSD_SendTuningBlock, 64U);
}
static status_t SD_SwitchVoltage(sd_card_t *card)
{
assert(card);
if ((card->usrParam.cardVoltage != NULL) && (card->usrParam.cardVoltage->cardSignalLine1V8 != NULL))
{
return SDMMC_SwitchToVoltage(card->host.base, card->host.transfer,
card->usrParam.cardVoltage->cardSignalLine1V8);
}
return SDMMC_SwitchToVoltage(card->host.base, card->host.transfer, NULL);
}
static status_t SD_StopTransmission(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
command.index = kSDMMC_StopTransmission;
command.argument = 0U;
command.type = kCARD_CommandTypeAbort;
command.responseType = kCARD_ResponseTypeR1b;
command.responseErrorFlags = SDMMC_R1_ALL_ERROR_FLAG;
content.command = &command;
content.data = 0U;
error = card->host.transfer(card->host.base, &content);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD12 failed with host error %d, reponse %x\r\n", error, command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
return kStatus_Success;
}
static status_t SD_Transfer(sd_card_t *card, SDMMCHOST_TRANSFER *content, uint32_t retry)
{
assert(card->host.transfer);
assert(content);
status_t error;
do
{
error = card->host.transfer(card->host.base, content);
#if SDMMC_ENABLE_SOFTWARE_TUNING
if (((error == SDMMCHOST_RETUNING_REQUEST) || (error == SDMMCHOST_TUNING_ERROR)) &&
(card->currentTiming == kSD_TimingSDR104Mode))
{
/* tuning error need reset tuning circuit */
if (error == SDMMCHOST_TUNING_ERROR)
{
SDMMCHOST_RESET_TUNING(card->host.base, 100U);
}
/* execute re-tuning */
if (SD_ExecuteTuning(card) != kStatus_Success)
{
error = kStatus_SDMMC_TuningFail;
break;
}
else
{
continue;
}
}
else
#endif
if (error != kStatus_Success)
{
/* if transfer data failed, send cmd12 to abort current transfer */
if (content->data)
{
SD_StopTransmission(card);
}
}
if (retry != 0U)
{
retry--;
}
else
{
break;
}
} while (error != kStatus_Success);
return error;
}
static status_t SD_WaitWriteComplete(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
command.index = kSDMMC_SendStatus;
command.argument = card->relativeAddress << 16U;
command.responseType = kCARD_ResponseTypeR1;
do
{
content.command = &command;
content.data = 0U;
error = SD_Transfer(card, &content, 2U);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD13 failed with host error %d, response %x", error, command.response[0U]);
break;
}
if ((command.response[0U] & SDMMC_MASK(kSDMMC_R1ReadyForDataFlag)) &&
(SDMMC_R1_CURRENT_STATE(command.response[0U]) != kSDMMC_R1StateProgram))
{
break;
}
} while (true);
return error;
}
static status_t SD_SendWriteSuccessBlocks(sd_card_t *card, uint32_t *blocks)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
status_t error = kStatus_Success;
memset(g_sdmmc, 0U, sizeof(g_sdmmc));
/* Wait for the card write process complete because of that card read process and write process use one buffer. */
if (kStatus_Success != SD_WaitWriteComplete(card))
{
return kStatus_SDMMC_WaitWriteCompleteFailed;
}
if (kStatus_Success != SD_SendApplicationCmd(card, card->relativeAddress))
{
return kStatus_SDMMC_SendApplicationCommandFailed;
}
command.index = kSD_ApplicationSendNumberWriteBlocks;
command.responseType = kCARD_ResponseTypeR1;
data.blockSize = 4U;
data.blockCount = 1U;
data.rxData = &g_sdmmc[0];
content.command = &command;
content.data = &data;
error = card->host.transfer(card->host.base, &content);
if ((kStatus_Success != error) || ((command.response[0U]) & SDMMC_R1_ALL_ERROR_FLAG))
{
SDMMC_LOG("\r\nError: send ACMD13 failed with host error %d, response %x", error, command.response[0U]);
}
else
{
*blocks = SWAP_WORD_BYTE_SEQUENCE(g_sdmmc[0]);
}
return error;
}
static status_t SD_SendRca(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
command.index = kSD_SendRelativeAddress;
command.argument = 0U;
command.responseType = kCARD_ResponseTypeR6;
content.command = &command;
content.data = NULL;
error = card->host.transfer(card->host.base, &content);
if (kStatus_Success == error)
{
card->relativeAddress = (command.response[0U] >> 16U);
}
else
{
SDMMC_LOG("\r\nError: send CMD3 failed with host error %d, response %x", error, command.response[0U]);
}
return error;
}
static status_t SD_SwitchFunction(sd_card_t *card, uint32_t mode, uint32_t group, uint32_t number, uint32_t *status)
{
assert(card);
assert(status);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
status_t error = kStatus_Success;
command.index = kSD_Switch;
command.argument = (mode << 31U | 0x00FFFFFFU);
command.argument &= ~((uint32_t)(0xFU) << (group * 4U));
command.argument |= (number << (group * 4U));
command.responseType = kCARD_ResponseTypeR1;
data.blockSize = 64U;
data.blockCount = 1U;
data.rxData = status;
content.command = &command;
content.data = &data;
error = card->host.transfer(card->host.base, &content);
if ((kStatus_Success != error) || ((command.response[0U]) & SDMMC_R1_ALL_ERROR_FLAG))
{
SDMMC_LOG("\r\n\r\nError: send CMD6 failed with host error %d, response %x", error, command.response[0U]);
}
return error;
}
static void SD_DecodeScr(sd_card_t *card, uint32_t *rawScr)
{
assert(card);
assert(rawScr);
sd_scr_t *scr;
scr = &(card->scr);
scr->scrStructure = (uint8_t)((rawScr[0U] & 0xF0000000U) >> 28U);
scr->sdSpecification = (uint8_t)((rawScr[0U] & 0xF000000U) >> 24U);
if ((uint8_t)((rawScr[0U] & 0x800000U) >> 23U))
{
scr->flags |= kSD_ScrDataStatusAfterErase;
}
scr->sdSecurity = (uint8_t)((rawScr[0U] & 0x700000U) >> 20U);
scr->sdBusWidths = (uint8_t)((rawScr[0U] & 0xF0000U) >> 16U);
if ((uint8_t)((rawScr[0U] & 0x8000U) >> 15U))
{
scr->flags |= kSD_ScrSdSpecification3;
}
scr->extendedSecurity = (uint8_t)((rawScr[0U] & 0x7800U) >> 10U);
scr->commandSupport = (uint8_t)(rawScr[0U] & 0x3U);
scr->reservedForManufacturer = rawScr[1U];
/* Get specification version. */
switch (scr->sdSpecification)
{
case 0U:
card->version = kSD_SpecificationVersion1_0;
break;
case 1U:
card->version = kSD_SpecificationVersion1_1;
break;
case 2U:
card->version = kSD_SpecificationVersion2_0;
if (card->scr.flags & kSD_ScrSdSpecification3)
{
card->version = kSD_SpecificationVersion3_0;
}
break;
default:
break;
}
if (card->scr.sdBusWidths & 0x4U)
{
card->flags |= kSD_Support4BitWidthFlag;
}
/* speed class control cmd */
if (card->scr.commandSupport & 0x01U)
{
card->flags |= kSD_SupportSpeedClassControlCmd;
}
/* set block count cmd */
if (card->scr.commandSupport & 0x02U)
{
card->flags |= kSD_SupportSetBlockCountCmd;
}
}
static status_t SD_SendScr(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
uint32_t *rawScr = g_sdmmc;
status_t error = kStatus_Success;
/* memset the global buffer */
memset(g_sdmmc, 0U, sizeof(g_sdmmc));
if (kStatus_Success != SD_SendApplicationCmd(card, card->relativeAddress))
{
return kStatus_SDMMC_SendApplicationCommandFailed;
}
command.index = kSD_ApplicationSendScr;
command.responseType = kCARD_ResponseTypeR1;
command.argument = 0U;
data.blockSize = 8U;
data.blockCount = 1U;
data.rxData = rawScr;
content.data = &data;
content.command = &command;
error = card->host.transfer(card->host.base, &content);
if ((kStatus_Success != error) || ((command.response[0U]) & SDMMC_R1_ALL_ERROR_FLAG))
{
SDMMC_LOG("\r\nError: send ACMD51 failed with host error %d, response %x", error, command.response[0U]);
}
else
{
/* SCR register data byte sequence from card is big endian(MSB first). */
switch (card->host.config.endianMode)
{
case kSDMMCHOST_EndianModeLittle:
/* In little endian mode, SD bus byte transferred first is the byte stored in lowest byte position in a
word which will cause 4 byte's sequence in a word is not consistent with their original sequence from
card. So the sequence of 4 bytes received in a word should be converted. */
rawScr[0U] = SWAP_WORD_BYTE_SEQUENCE(rawScr[0U]);
rawScr[1U] = SWAP_WORD_BYTE_SEQUENCE(rawScr[1U]);
break;
case kSDMMCHOST_EndianModeBig:
break; /* Doesn't need to switch byte sequence when decodes bytes as big endian sequence. */
case kSDMMCHOST_EndianModeHalfWordBig:
rawScr[0U] = SWAP_HALF_WROD_BYTE_SEQUENCE(rawScr[0U]);
rawScr[1U] = SWAP_HALF_WROD_BYTE_SEQUENCE(rawScr[1U]);
break;
default:
return kStatus_SDMMC_NotSupportYet;
}
memcpy(card->rawScr, rawScr, sizeof(card->rawScr));
/* decode scr */
SD_DecodeScr(card, rawScr);
}
return error;
}
static status_t SD_SelectFunction(sd_card_t *card, uint32_t group, uint32_t function)
{
assert(card);
uint32_t *functionStatus = g_sdmmc;
uint16_t functionGroupInfo[6U] = {0};
uint32_t currentFunctionStatus = 0U;
/* memset the global buffer */
memset(g_sdmmc, 0, sizeof(g_sdmmc));
/* check if card support CMD6 */
if ((card->version <= kSD_SpecificationVersion1_0) || (!(card->csd.cardCommandClass & kSDMMC_CommandClassSwitch)))
{
SDMMC_LOG("\r\nError: current card not support CMD6");
return kStatus_SDMMC_NotSupportYet;
}
/* Check if card support high speed mode. */
if (kStatus_Success != SD_SwitchFunction(card, kSD_SwitchCheck, group, function, functionStatus))
{
return kStatus_SDMMC_TransferFailed;
}
/* Switch function status byte sequence from card is big endian(MSB first). */
switch (card->host.config.endianMode)
{
case kSDMMCHOST_EndianModeLittle:
/* In little endian mode, SD bus byte transferred first is the byte stored in lowest byte position in
a word which will cause 4 byte's sequence in a word is not consistent with their original sequence from
card. So the sequence of 4 bytes received in a word should be converted. */
functionStatus[0U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[0U]);
functionStatus[1U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[1U]);
functionStatus[2U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[2U]);
functionStatus[3U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[3U]);
functionStatus[4U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[4U]);
break;
case kSDMMCHOST_EndianModeBig:
break; /* Doesn't need to switch byte sequence when decodes bytes as big endian sequence. */
case kSDMMCHOST_EndianModeHalfWordBig:
functionStatus[0U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[0U]);
functionStatus[1U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[1U]);
functionStatus[2U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[2U]);
functionStatus[3U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[3U]);
functionStatus[4U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[4U]);
break;
default:
return kStatus_SDMMC_NotSupportYet;
}
/* -functionStatus[0U]---bit511~bit480;
-functionStatus[1U]---bit479~bit448;
-functionStatus[2U]---bit447~bit416;
-functionStatus[3U]---bit415~bit384;
-functionStatus[4U]---bit383~bit352;
According to the "switch function status[bits 511~0]" return by switch command in mode "check function":
-Check if function 1(high speed) in function group 1 is supported by checking if bit 401 is set;
-check if function 1 is ready and can be switched by checking if bits 379~376 equal value 1;
*/
functionGroupInfo[5U] = (uint16_t)functionStatus[0U];
functionGroupInfo[4U] = (uint16_t)(functionStatus[1U] >> 16U);
functionGroupInfo[3U] = (uint16_t)(functionStatus[1U]);
functionGroupInfo[2U] = (uint16_t)(functionStatus[2U] >> 16U);
functionGroupInfo[1U] = (uint16_t)(functionStatus[2U]);
functionGroupInfo[0U] = (uint16_t)(functionStatus[3U] >> 16U);
currentFunctionStatus = ((functionStatus[3U] & 0xFFU) << 8U) | (functionStatus[4U] >> 24U);
/* check if function is support */
if (((functionGroupInfo[group] & (1 << function)) == 0U) ||
((currentFunctionStatus >> (group * 4U)) & 0xFU) != function)
{
SDMMC_LOG("\r\nError: current card not support function %d", function);
return kStatus_SDMMC_NotSupportYet;
}
/* Switch to high speed mode. */
if (kStatus_Success != SD_SwitchFunction(card, kSD_SwitchSet, group, function, functionStatus))
{
return kStatus_SDMMC_TransferFailed;
}
/* Switch function status byte sequence from card is big endian(MSB first). */
switch (card->host.config.endianMode)
{
case kSDMMCHOST_EndianModeLittle:
/* In little endian mode is little endian, SD bus byte transferred first is the byte stored in lowest byte
position in a word which will cause 4 byte's sequence in a word is not consistent with their original
sequence from card. So the sequence of 4 bytes received in a word should be converted. */
functionStatus[3U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[3U]);
functionStatus[4U] = SWAP_WORD_BYTE_SEQUENCE(functionStatus[4U]);
break;
case kSDMMCHOST_EndianModeBig:
break; /* Doesn't need to switch byte sequence when decodes bytes as big endian sequence. */
case kSDMMCHOST_EndianModeHalfWordBig:
functionStatus[3U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[3U]);
functionStatus[4U] = SWAP_HALF_WROD_BYTE_SEQUENCE(functionStatus[4U]);
break;
default:
return kStatus_SDMMC_NotSupportYet;
}
/* According to the "switch function status[bits 511~0]" return by switch command in mode "set function":
-check if group 1 is successfully changed to function 1 by checking if bits 379~376 equal value 1;
*/
currentFunctionStatus = ((functionStatus[3U] & 0xFFU) << 8U) | (functionStatus[4U] >> 24U);
if (((currentFunctionStatus >> (group * 4U)) & 0xFU) != function)
{
SDMMC_LOG("\r\nError: switch to function %d failed", function);
return kStatus_SDMMC_SwitchFailed;
}
return kStatus_Success;
}
static status_t SD_SetDataBusWidth(sd_card_t *card, sd_data_bus_width_t width)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
if (kStatus_Success != SD_SendApplicationCmd(card, card->relativeAddress))
{
return kStatus_SDMMC_SendApplicationCommandFailed;
}
command.index = kSD_ApplicationSetBusWdith;
command.responseType = kCARD_ResponseTypeR1;
switch (width)
{
case kSD_DataBusWidth1Bit:
command.argument = 0U;
break;
case kSD_DataBusWidth4Bit:
command.argument = 2U;
break;
default:
return kStatus_InvalidArgument;
}
content.command = &command;
content.data = NULL;
error = card->host.transfer(card->host.base, &content);
if ((kStatus_Success != error) || ((command.response[0U]) & SDMMC_R1_ALL_ERROR_FLAG))
{
SDMMC_LOG("\r\nError: send ACMD6 failed with host error %d, response %x", error, command.response[0U]);
}
return error;
}
static void SD_DecodeCsd(sd_card_t *card, uint32_t *rawCsd)
{
assert(card);
assert(rawCsd);
sd_csd_t *csd;
csd = &(card->csd);
csd->csdStructure = (uint8_t)((rawCsd[3U] & 0xC0000000U) >> 30U);
csd->dataReadAccessTime1 = (uint8_t)((rawCsd[3U] & 0xFF0000U) >> 16U);
csd->dataReadAccessTime2 = (uint8_t)((rawCsd[3U] & 0xFF00U) >> 8U);
csd->transferSpeed = (uint8_t)(rawCsd[3U] & 0xFFU);
csd->cardCommandClass = (uint16_t)((rawCsd[2U] & 0xFFF00000U) >> 20U);
csd->readBlockLength = (uint8_t)((rawCsd[2U] & 0xF0000U) >> 16U);
if (rawCsd[2U] & 0x8000U)
{
csd->flags |= kSD_CsdReadBlockPartialFlag;
}
if (rawCsd[2U] & 0x4000U)
{
csd->flags |= kSD_CsdReadBlockPartialFlag;
}
if (rawCsd[2U] & 0x2000U)
{
csd->flags |= kSD_CsdReadBlockMisalignFlag;
}
if (rawCsd[2U] & 0x1000U)
{
csd->flags |= kSD_CsdDsrImplementedFlag;
}
switch (csd->csdStructure)
{
case 0:
csd->deviceSize = (uint32_t)((rawCsd[2U] & 0x3FFU) << 2U);
csd->deviceSize |= (uint32_t)((rawCsd[1U] & 0xC0000000U) >> 30U);
csd->readCurrentVddMin = (uint8_t)((rawCsd[1U] & 0x38000000U) >> 27U);
csd->readCurrentVddMax = (uint8_t)((rawCsd[1U] & 0x7000000U) >> 24U);
csd->writeCurrentVddMin = (uint8_t)((rawCsd[1U] & 0xE00000U) >> 20U);
csd->writeCurrentVddMax = (uint8_t)((rawCsd[1U] & 0x1C0000U) >> 18U);
csd->deviceSizeMultiplier = (uint8_t)((rawCsd[1U] & 0x38000U) >> 15U);
/* Get card total block count and block size. */
card->blockCount = ((csd->deviceSize + 1U) << (csd->deviceSizeMultiplier + 2U));
card->blockSize = (1U << (csd->readBlockLength));
if (card->blockSize != FSL_SDMMC_DEFAULT_BLOCK_SIZE)
{
card->blockCount = (card->blockCount * card->blockSize);
card->blockSize = FSL_SDMMC_DEFAULT_BLOCK_SIZE;
card->blockCount = (card->blockCount / card->blockSize);
}
break;
case 1:
card->blockSize = FSL_SDMMC_DEFAULT_BLOCK_SIZE;
csd->deviceSize = (uint32_t)((rawCsd[2U] & 0x3FU) << 16U);
csd->deviceSize |= (uint32_t)((rawCsd[1U] & 0xFFFF0000U) >> 16U);
if (csd->deviceSize >= 0xFFFFU)
{
card->flags |= kSD_SupportSdxcFlag;
}
card->blockCount = ((csd->deviceSize + 1U) * 1024U);
break;
default:
break;
}
if ((uint8_t)((rawCsd[1U] & 0x4000U) >> 14U))
{
csd->flags |= kSD_CsdEraseBlockEnabledFlag;
}
csd->eraseSectorSize = (uint8_t)((rawCsd[1U] & 0x3F80U) >> 7U);
csd->writeProtectGroupSize = (uint8_t)(rawCsd[1U] & 0x7FU);
if ((uint8_t)(rawCsd[0U] & 0x80000000U))
{
csd->flags |= kSD_CsdWriteProtectGroupEnabledFlag;
}
csd->writeSpeedFactor = (uint8_t)((rawCsd[0U] & 0x1C000000U) >> 26U);
csd->writeBlockLength = (uint8_t)((rawCsd[0U] & 0x3C00000U) >> 22U);
if ((uint8_t)((rawCsd[0U] & 0x200000U) >> 21U))
{
csd->flags |= kSD_CsdWriteBlockPartialFlag;
}
if ((uint8_t)((rawCsd[0U] & 0x8000U) >> 15U))
{
csd->flags |= kSD_CsdFileFormatGroupFlag;
}
if ((uint8_t)((rawCsd[0U] & 0x4000U) >> 14U))
{
csd->flags |= kSD_CsdCopyFlag;
}
if ((uint8_t)((rawCsd[0U] & 0x2000U) >> 13U))
{
csd->flags |= kSD_CsdPermanentWriteProtectFlag;
}
if ((uint8_t)((rawCsd[0U] & 0x1000U) >> 12U))
{
csd->flags |= kSD_CsdTemporaryWriteProtectFlag;
}
csd->fileFormat = (uint8_t)((rawCsd[0U] & 0xC00U) >> 10U);
}
static status_t SD_SendCsd(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
command.index = kSDMMC_SendCsd;
command.argument = (card->relativeAddress << 16U);
command.responseType = kCARD_ResponseTypeR2;
content.command = &command;
content.data = NULL;
error = card->host.transfer(card->host.base, &content);
if (kStatus_Success == error)
{
memcpy(card->rawCsd, command.response, sizeof(card->rawCsd));
/* The response is from bit 127:8 in R2, corrisponding to command.response[3U]:command.response[0U][31U:8]. */
SD_DecodeCsd(card, command.response);
}
else
{
error = kStatus_SDMMC_TransferFailed;
SDMMC_LOG("\r\nError: send CMD9(get csd) failed with host error %d, response %x", error, command.response[0U]);
}
return error;
}
static void SD_DecodeCid(sd_card_t *card, uint32_t *rawCid)
{
assert(card);
assert(rawCid);
sd_cid_t *cid;
cid = &(card->cid);
cid->manufacturerID = (uint8_t)((rawCid[3U] & 0xFF000000U) >> 24U);
cid->applicationID = (uint16_t)((rawCid[3U] & 0xFFFF00U) >> 8U);
cid->productName[0U] = (uint8_t)((rawCid[3U] & 0xFFU));
cid->productName[1U] = (uint8_t)((rawCid[2U] & 0xFF000000U) >> 24U);
cid->productName[2U] = (uint8_t)((rawCid[2U] & 0xFF0000U) >> 16U);
cid->productName[3U] = (uint8_t)((rawCid[2U] & 0xFF00U) >> 8U);
cid->productName[4U] = (uint8_t)((rawCid[2U] & 0xFFU));
cid->productVersion = (uint8_t)((rawCid[1U] & 0xFF000000U) >> 24U);
cid->productSerialNumber = (uint32_t)((rawCid[1U] & 0xFFFFFFU) << 8U);
cid->productSerialNumber |= (uint32_t)((rawCid[0U] & 0xFF000000U) >> 24U);
cid->manufacturerData = (uint16_t)((rawCid[0U] & 0xFFF00U) >> 8U);
}
static status_t SD_AllSendCid(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
command.index = kSDMMC_AllSendCid;
command.argument = 0U;
command.responseType = kCARD_ResponseTypeR2;
content.command = &command;
content.data = NULL;
if (kStatus_Success == card->host.transfer(card->host.base, &content))
{
memcpy(card->rawCid, command.response, sizeof(card->rawCid));
SD_DecodeCid(card, command.response);
return kStatus_Success;
}
return kStatus_SDMMC_TransferFailed;
}
static status_t SD_ApplicationSendOperationCondition(sd_card_t *card, uint32_t argument)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Fail;
uint32_t i = FSL_SDMMC_MAX_VOLTAGE_RETRIES;
command.index = kSD_ApplicationSendOperationCondition;
command.argument = argument;
command.responseType = kCARD_ResponseTypeR3;
while (i--)
{
if (kStatus_Success != SD_SendApplicationCmd(card, 0U))
{
continue;
}
content.command = &command;
content.data = NULL;
error = card->host.transfer(card->host.base, &content);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send ACMD41 failed with host error %d, response %x", error, command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
/* Wait until card exit busy state. */
if (command.response[0U] & SDMMC_MASK(kSD_OcrPowerUpBusyFlag))
{
/* high capacity check */
if (command.response[0U] & SDMMC_MASK(kSD_OcrCardCapacitySupportFlag))
{
card->flags |= kSD_SupportHighCapacityFlag;
}
/* 1.8V support */
if (command.response[0U] & SDMMC_MASK(kSD_OcrSwitch18AcceptFlag))
{
card->flags |= kSD_SupportVoltage180v;
}
card->ocr = command.response[0U];
return kStatus_Success;
}
}
SDMMC_LOG("\r\nError: send ACMD41 timeout");
return error;
}
static status_t SD_SendInterfaceCondition(sd_card_t *card)
{
assert(card);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
uint32_t i = FSL_SDMMC_MAX_CMD_RETRIES;
status_t error = kStatus_Success;
command.index = kSD_SendInterfaceCondition;
command.argument = 0x1AAU;
command.responseType = kCARD_ResponseTypeR7;
content.command = &command;
content.data = NULL;
do
{
error = card->host.transfer(card->host.base, &content);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD8 failed with host error %d, response %x", error, command.response[0U]);
}
else
{
if ((command.response[0U] & 0xFFU) != 0xAAU)
{
error = kStatus_SDMMC_CardNotSupport;
SDMMC_LOG("\r\nError: card not support CMD8");
}
else
{
error = kStatus_Success;
}
}
} while (--i && (error != kStatus_Success));
return error;
}
static status_t SD_SelectBusTiming(sd_card_t *card)
{
assert(card);
status_t error = kStatus_SDMMC_SwitchBusTimingFailed;
if (card->operationVoltage != kCARD_OperationVoltage180V)
{
/* Switch the card to high speed mode */
if (card->host.capability.flags & kSDMMCHOST_SupportHighSpeed)
{
/* group 1, function 1 ->high speed mode*/
error = SD_SelectFunction(card, kSD_GroupTimingMode, kSD_FunctionSDR25HighSpeed);
/* If the result isn't "switching to high speed mode(50MHZ) successfully or card doesn't support high speed
* mode". Return failed status. */
if (error == kStatus_Success)
{
card->currentTiming = kSD_TimingSDR25HighSpeedMode;
card->busClock_Hz =
SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SD_CLOCK_50MHZ);
}
else if (error == kStatus_SDMMC_NotSupportYet)
{
/* if not support high speed, keep the card work at default mode */
SDMMC_LOG("\r\nNote: High speed mode is not supported by card");
return kStatus_Success;
}
}
else
{
/* if not support high speed, keep the card work at default mode */
return kStatus_Success;
}
}
/* card is in UHS_I mode */
else if ((kSDMMCHOST_SupportSDR104 != SDMMCHOST_NOT_SUPPORT) ||
(kSDMMCHOST_SupportSDR50 != SDMMCHOST_NOT_SUPPORT) || (kSDMMCHOST_SupportDDR50 != SDMMCHOST_NOT_SUPPORT))
{
switch (card->currentTiming)
{
/* if not select timing mode, sdmmc will handle it automatically*/
case kSD_TimingSDR12DefaultMode:
case kSD_TimingSDR104Mode:
error = SD_SelectFunction(card, kSD_GroupTimingMode, kSD_FunctionSDR104);
if (error == kStatus_Success)
{
card->currentTiming = kSD_TimingSDR104Mode;
card->busClock_Hz = SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz,
SDMMCHOST_SUPPORT_SDR104_FREQ);
break;
}
SDMMC_LOG("\r\nNote: SDR104 mode is not supported by card");
case kSD_TimingDDR50Mode:
error = SD_SelectFunction(card, kSD_GroupTimingMode, kSD_FunctionDDR50);
if (error == kStatus_Success)
{
card->currentTiming = kSD_TimingDDR50Mode;
card->busClock_Hz =
SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SD_CLOCK_50MHZ);
SDMMCHOST_ENABLE_DDR_MODE(card->host.base, true, 0U);
break;
}
SDMMC_LOG("\r\nNote: DDR50 mode is not supported by card");
case kSD_TimingSDR50Mode:
error = SD_SelectFunction(card, kSD_GroupTimingMode, kSD_FunctionSDR50);
if (error == kStatus_Success)
{
card->currentTiming = kSD_TimingSDR50Mode;
card->busClock_Hz =
SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SD_CLOCK_100MHZ);
break;
}
SDMMC_LOG("\r\nNote: SDR50 mode is not supported by card");
case kSD_TimingSDR25HighSpeedMode:
error = SD_SelectFunction(card, kSD_GroupTimingMode, kSD_FunctionSDR25HighSpeed);
if (error == kStatus_Success)
{
card->currentTiming = kSD_TimingSDR25HighSpeedMode;
card->busClock_Hz =
SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SD_CLOCK_50MHZ);
}
break;
default:
SDMMC_LOG("\r\nWarning: unknown timing mode");
break;
}
}
else
{
}
if (error == kStatus_Success)
{
/* SDR50 and SDR104 mode need tuning */
if ((card->currentTiming == kSD_TimingSDR50Mode) || (card->currentTiming == kSD_TimingSDR104Mode))
{
/* config IO strength in IOMUX*/
if (card->currentTiming == kSD_TimingSDR50Mode)
{
SDMMCHOST_CONFIG_SD_IO(CARD_BUS_FREQ_100MHZ1, CARD_BUS_STRENGTH_7);
}
else
{
SDMMCHOST_CONFIG_SD_IO(CARD_BUS_FREQ_200MHZ, CARD_BUS_STRENGTH_7);
}
/* execute tuning */
if (SD_ExecuteTuning(card) != kStatus_Success)
{
SDMMC_LOG("\r\nError: tuning failed for mode %d", card->currentTiming);
return kStatus_SDMMC_TuningFail;
}
}
else
{
/* set default IO strength to 4 to cover card adapter driver strength difference */
SDMMCHOST_CONFIG_SD_IO(CARD_BUS_FREQ_100MHZ1, CARD_BUS_STRENGTH_4);
}
}
return error;
}
static void SD_DecodeStatus(sd_card_t *card, uint32_t *src)
{
assert(card);
assert(src);
card->stat.busWidth = (uint8_t)((src[0U] & 0xC0000000U) >> 30U); /* 511-510 */
card->stat.secureMode = (uint8_t)((src[0U] & 0x20000000U) >> 29U); /* 509 */
card->stat.cardType = (uint16_t)((src[0U] & 0x0000FFFFU)); /* 495-480 */
card->stat.protectedSize = src[1U]; /* 479-448 */
card->stat.speedClass = (uint8_t)((src[2U] & 0xFF000000U) >> 24U); /* 447-440 */
card->stat.performanceMove = (uint8_t)((src[2U] & 0x00FF0000U) >> 16U); /* 439-432 */
card->stat.auSize = (uint8_t)((src[2U] & 0x0000F000U) >> 12U); /* 431-428 */
card->stat.eraseSize = (uint16_t)(((src[2U] & 0x000000FFU) << 8U) | ((src[3U] & 0xFF000000U) >> 24U)); /* 423-408 */
card->stat.eraseTimeout = (((uint8_t)((src[3U] & 0x00FF0000U) >> 16U)) & 0xFCU) >> 2U; /* 407-402 */
card->stat.eraseOffset = ((uint8_t)((src[3U] & 0x00FF0000U) >> 16U)) & 0x3U; /* 401-400 */
card->stat.uhsSpeedGrade = (((uint8_t)((src[3U] & 0x0000FF00U) >> 8U)) & 0xF0U) >> 4U; /* 399-396 */
card->stat.uhsAuSize = ((uint8_t)((src[3U] & 0x0000FF00U) >> 8U)) & 0xFU; /* 395-392 */
}
status_t SD_ReadStatus(sd_card_t *card)
{
assert(card);
uint32_t i = 0U;
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
status_t error = kStatus_Success;
memset(g_sdmmc, 0U, sizeof(g_sdmmc));
/* wait card status ready. */
if (kStatus_Success != SD_WaitWriteComplete(card))
{
return kStatus_SDMMC_WaitWriteCompleteFailed;
}
if (kStatus_Success != SD_SendApplicationCmd(card, card->relativeAddress))
{
return kStatus_SDMMC_SendApplicationCommandFailed;
}
command.index = kSDMMC_SendStatus;
command.responseType = kCARD_ResponseTypeR1;
data.blockSize = 64U;
data.blockCount = 1U;
data.rxData = &g_sdmmc[0];
content.command = &command;
content.data = &data;
error = card->host.transfer(card->host.base, &content);
if ((kStatus_Success != error) || ((command.response[0U]) & SDMMC_R1_ALL_ERROR_FLAG))
{
SDMMC_LOG("\r\nError: send ACMD13 failed with host error %d, response %x", error, command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
switch (card->host.config.endianMode)
{
case kSDMMCHOST_EndianModeLittle:
/* In little endian mode, SD bus byte transferred first is the byte stored in lowest byte position in
a word which will cause 4 byte's sequence in a word is not consistent with their original sequence from
card. So the sequence of 4 bytes received in a word should be converted. */
for (i = 0U; i < 16; i++)
{
g_sdmmc[i] = SWAP_WORD_BYTE_SEQUENCE(g_sdmmc[i]);
}
break;
case kSDMMCHOST_EndianModeBig:
break; /* Doesn't need to switch byte sequence when decodes bytes as big endian sequence. */
case kSDMMCHOST_EndianModeHalfWordBig:
for (i = 0U; i < 16; i++)
{
g_sdmmc[i] = SWAP_HALF_WROD_BYTE_SEQUENCE(g_sdmmc[i]);
}
break;
default:
return kStatus_SDMMC_NotSupportYet;
}
SD_DecodeStatus(card, g_sdmmc);
return kStatus_Success;
}
status_t SD_SelectCard(sd_card_t *card, bool isSelected)
{
assert(card);
return SDMMC_SelectCard(card->host.base, card->host.transfer, card->relativeAddress, isSelected);
}
status_t SD_SetDriverStrength(sd_card_t *card, sd_driver_strength_t driverStrength)
{
assert(card);
status_t error;
uint32_t strength = driverStrength;
error = SD_SelectFunction(card, kSD_GroupDriverStrength, strength);
return error;
}
status_t SD_SetMaxCurrent(sd_card_t *card, sd_max_current_t maxCurrent)
{
assert(card);
status_t error;
uint32_t current = maxCurrent;
error = SD_SelectFunction(card, kSD_GroupCurrentLimit, current);
return error;
}
static status_t SD_Read(sd_card_t *card, uint8_t *buffer, uint32_t startBlock, uint32_t blockSize, uint32_t blockCount)
{
assert(card);
assert(buffer);
assert(blockCount);
assert(blockSize == FSL_SDMMC_DEFAULT_BLOCK_SIZE);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
if (((card->flags & kSD_SupportHighCapacityFlag) && (blockSize != 512U)) || (blockSize > card->blockSize) ||
(blockSize > card->host.capability.maxBlockLength) || (blockSize % 4))
{
SDMMC_LOG("\r\nError: read with parameter, block size %d is not support", blockSize);
return kStatus_SDMMC_CardNotSupport;
}
/* Wait for the card write process complete because of that card read process and write process use one buffer. */
if (kStatus_Success != SD_WaitWriteComplete(card))
{
return kStatus_SDMMC_WaitWriteCompleteFailed;
}
data.blockSize = blockSize;
data.blockCount = blockCount;
data.rxData = (uint32_t *)buffer;
data.enableAutoCommand12 = true;
command.index = (blockCount == 1U) ? kSDMMC_ReadSingleBlock : kSDMMC_ReadMultipleBlock;
command.argument = startBlock;
if (!(card->flags & kSD_SupportHighCapacityFlag))
{
command.argument *= data.blockSize;
}
command.responseType = kCARD_ResponseTypeR1;
command.responseErrorFlags = SDMMC_R1_ALL_ERROR_FLAG;
content.command = &command;
content.data = &data;
return SD_Transfer(card, &content, 1U);
}
static status_t SD_Write(sd_card_t *card,
const uint8_t *buffer,
uint32_t startBlock,
uint32_t blockSize,
uint32_t blockCount,
uint32_t *writtenBlocks)
{
assert(card);
assert(buffer);
assert(blockCount);
assert(blockSize == FSL_SDMMC_DEFAULT_BLOCK_SIZE);
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
SDMMCHOST_DATA data = {0};
status_t error;
if (((card->flags & kSD_SupportHighCapacityFlag) && (blockSize != 512U)) || (blockSize > card->blockSize) ||
(blockSize > card->host.capability.maxBlockLength) || (blockSize % 4U))
{
SDMMC_LOG("\r\nError: write with parameter, block size %d is not support", blockSize);
return kStatus_SDMMC_CardNotSupport;
}
/* Wait for the card write process complete because of that card read process and write process use one buffer.*/
if (kStatus_Success != SD_WaitWriteComplete(card))
{
return kStatus_SDMMC_WaitWriteCompleteFailed;
}
/* Wait for the card's buffer to be not full to write to improve the write performance. */
while ((GET_SDMMCHOST_STATUS(card->host.base) & CARD_DATA0_STATUS_MASK) != CARD_DATA0_NOT_BUSY)
{
}
data.enableAutoCommand12 = true;
data.blockSize = blockSize;
command.responseType = kCARD_ResponseTypeR1;
command.responseErrorFlags = SDMMC_R1_ALL_ERROR_FLAG;
command.index = (blockCount == 1U) ? kSDMMC_WriteSingleBlock : kSDMMC_WriteMultipleBlock;
command.argument = startBlock;
if (!(card->flags & kSD_SupportHighCapacityFlag))
{
command.argument *= data.blockSize;
}
*writtenBlocks = blockCount;
data.blockCount = blockCount;
data.txData = (const uint32_t *)(buffer);
content.command = &command;
content.data = &data;
error = SD_Transfer(card, &content, 0U);
if (error != kStatus_Success)
{
/* check the successfully written block */
if ((SD_SendWriteSuccessBlocks(card, writtenBlocks) == kStatus_Success))
{
if (*writtenBlocks)
{
/* written success, but not all the blocks are written */
error = kStatus_Success;
}
}
SDMMC_LOG("\r\nWarning: write failed with block count %d, successed %d", blockCount, *writtenBlocks);
}
return error;
}
static status_t SD_Erase(sd_card_t *card, uint32_t startBlock, uint32_t blockCount)
{
assert(card);
assert(blockCount);
uint32_t eraseBlockStart;
uint32_t eraseBlockEnd;
SDMMCHOST_TRANSFER content = {0};
SDMMCHOST_COMMAND command = {0};
status_t error = kStatus_Success;
/* Wait for the card write process complete because of that card read process and write process use one buffer.*/
if (kStatus_Success != SD_WaitWriteComplete(card))
{
return kStatus_SDMMC_WaitWriteCompleteFailed;
}
/* Wait for the card's buffer to be not full to write to improve the write performance. */
while ((GET_SDMMCHOST_STATUS(card->host.base) & CARD_DATA0_STATUS_MASK) != CARD_DATA0_NOT_BUSY)
{
}
eraseBlockStart = startBlock;
eraseBlockEnd = eraseBlockStart + blockCount - 1U;
if (!(card->flags & kSD_SupportHighCapacityFlag))
{
eraseBlockStart = eraseBlockStart * FSL_SDMMC_DEFAULT_BLOCK_SIZE;
eraseBlockEnd = eraseBlockEnd * FSL_SDMMC_DEFAULT_BLOCK_SIZE;
}
/* Send ERASE_WRITE_BLOCK_START command to set the start block number to erase. */
command.index = kSD_EraseWriteBlockStart;
command.argument = eraseBlockStart;
command.responseType = kCARD_ResponseTypeR1;
command.responseErrorFlags = SDMMC_R1_ALL_ERROR_FLAG;
content.command = &command;
content.data = NULL;
error = SD_Transfer(card, &content, 1U);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD32(erase start) failed with host error %d, response %x", error,
command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
/* Send ERASE_WRITE_BLOCK_END command to set the end block number to erase. */
command.index = kSD_EraseWriteBlockEnd;
command.argument = eraseBlockEnd;
content.command = &command;
content.data = NULL;
error = SD_Transfer(card, &content, 0U);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD33(erase end) failed with host error %d, response %x", error,
command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
/* Send ERASE command to start erase process. */
command.index = kSDMMC_Erase;
command.argument = 0U;
command.responseType = kCARD_ResponseTypeR1b;
command.responseErrorFlags = SDMMC_R1_ALL_ERROR_FLAG;
content.command = &command;
content.data = NULL;
error = SD_Transfer(card, &content, 0U);
if (kStatus_Success != error)
{
SDMMC_LOG("\r\nError: send CMD38(erase) failed with host error %d, response %x", error, command.response[0U]);
return kStatus_SDMMC_TransferFailed;
}
return kStatus_Success;
}
bool SD_CheckReadOnly(sd_card_t *card)
{
assert(card);
return ((card->csd.flags & kSD_CsdPermanentWriteProtectFlag) ||
(card->csd.flags & kSD_CsdTemporaryWriteProtectFlag));
}
status_t SD_ReadBlocks(sd_card_t *card, uint8_t *buffer, uint32_t startBlock, uint32_t blockCount)
{
assert(card);
assert(buffer);
assert(blockCount);
assert((blockCount + startBlock) <= card->blockCount);
uint32_t blockCountOneTime;
uint32_t blockLeft;
uint32_t blockDone = 0U;
uint8_t *nextBuffer = buffer;
bool dataAddrAlign = true;
blockLeft = blockCount;
while (blockLeft)
{
nextBuffer = (buffer + blockDone * FSL_SDMMC_DEFAULT_BLOCK_SIZE);
if (!card->noInteralAlign && (!dataAddrAlign || (((uint32_t)nextBuffer) & (sizeof(uint32_t) - 1U))))
{
blockLeft--;
blockCountOneTime = 1U;
memset(g_sdmmc, 0U, FSL_SDMMC_DEFAULT_BLOCK_SIZE);
dataAddrAlign = false;
}
else
{
if (blockLeft > card->host.capability.maxBlockCount)
{
blockLeft = (blockLeft - card->host.capability.maxBlockCount);
blockCountOneTime = card->host.capability.maxBlockCount;
}
else
{
blockCountOneTime = blockLeft;
blockLeft = 0U;
}
}
if (kStatus_Success != SD_Read(card, dataAddrAlign ? nextBuffer : (uint8_t *)g_sdmmc, (startBlock + blockDone),
FSL_SDMMC_DEFAULT_BLOCK_SIZE, blockCountOneTime))
{
return kStatus_SDMMC_TransferFailed;
}
blockDone += blockCountOneTime;
if (!card->noInteralAlign && (!dataAddrAlign))
{
memcpy(nextBuffer, (uint8_t *)&g_sdmmc, FSL_SDMMC_DEFAULT_BLOCK_SIZE);
}
}
return kStatus_Success;
}
status_t SD_WriteBlocks(sd_card_t *card, const uint8_t *buffer, uint32_t startBlock, uint32_t blockCount)
{
assert(card);
assert(buffer);
assert(blockCount);
assert((blockCount + startBlock) <= card->blockCount);
uint32_t blockCountOneTime = 0U; /* The block count can be wrote in one time sending WRITE_BLOCKS command. */
uint32_t blockWrittenOneTime = 0U;
uint32_t blockLeft = 0U; /* Left block count to be wrote. */
const uint8_t *nextBuffer;
bool dataAddrAlign = true;
blockLeft = blockCount;
while (blockLeft)
{
nextBuffer = (buffer + (blockCount - blockLeft) * FSL_SDMMC_DEFAULT_BLOCK_SIZE);
if (!card->noInteralAlign && (!dataAddrAlign || (((uint32_t)nextBuffer) & (sizeof(uint32_t) - 1U))))
{
blockCountOneTime = 1U;
memcpy((uint8_t *)&g_sdmmc, nextBuffer, FSL_SDMMC_DEFAULT_BLOCK_SIZE);
dataAddrAlign = false;
}
else
{
if (blockLeft > card->host.capability.maxBlockCount)
{
blockCountOneTime = card->host.capability.maxBlockCount;
}
else
{
blockCountOneTime = blockLeft;
}
}
if (kStatus_Success != SD_Write(card, dataAddrAlign ? nextBuffer : (uint8_t *)g_sdmmc,
(startBlock + blockCount - blockLeft), FSL_SDMMC_DEFAULT_BLOCK_SIZE,
blockCountOneTime, &blockWrittenOneTime))
{
return kStatus_SDMMC_TransferFailed;
}
blockLeft -= blockWrittenOneTime;
if ((!card->noInteralAlign) && !dataAddrAlign)
{
memset(g_sdmmc, 0U, FSL_SDMMC_DEFAULT_BLOCK_SIZE);
}
}
return kStatus_Success;
}
status_t SD_EraseBlocks(sd_card_t *card, uint32_t startBlock, uint32_t blockCount)
{
assert(card);
assert(blockCount);
assert((blockCount + startBlock) <= card->blockCount);
uint32_t blockCountOneTime; /* The block count can be erased in one time sending ERASE_BLOCKS command. */
uint32_t blockDone = 0U; /* The block count has been erased. */
uint32_t blockLeft; /* Left block count to be erase. */
status_t error;
uint32_t onetimeMaxEraseBlocks = 0U;
/* sdsc card erasable sector is determined by CSD register */
if (card->csd.csdStructure == 0U)
{
onetimeMaxEraseBlocks = card->csd.eraseSectorSize + 1U;
}
else
{
/* limit one time maximum erase size to 1 AU */
if (card->stat.auSize >= SD_AU_START_VALUE)
{
onetimeMaxEraseBlocks = s_sdAuSizeMap[card->stat.auSize] / FSL_SDMMC_DEFAULT_BLOCK_SIZE;
}
}
if (onetimeMaxEraseBlocks == 0U)
{
SDMMC_LOG(
"Warning: AU size in sd descriptor is not set properly, please check if SD_ReadStatus is called before\
SD_EraseBlocks");
return kStatus_SDMMC_AuSizeNotSetProperly;
}
blockLeft = blockCount;
while (blockLeft)
{
if (blockLeft > onetimeMaxEraseBlocks)
{
blockCountOneTime = onetimeMaxEraseBlocks;
blockLeft = blockLeft - blockCountOneTime;
}
else
{
blockCountOneTime = blockLeft;
blockLeft = 0U;
}
error = SD_Erase(card, (startBlock + blockDone), blockCountOneTime);
if (error != kStatus_Success)
{
return error;
}
blockDone += blockCountOneTime;
}
return kStatus_Success;
}
status_t SD_ProbeBusVoltage(sd_card_t *card)
{
assert(card);
uint32_t applicationCommand41Argument = 0U;
status_t error = kStatus_Success;
/* 3.3V voltage should be supported as default */
applicationCommand41Argument |=
SDMMC_MASK(kSD_OcrVdd29_30Flag) | SDMMC_MASK(kSD_OcrVdd32_33Flag) | SDMMC_MASK(kSD_OcrVdd33_34Flag);
/* make sure card signal line voltage is 3.3v before initalization */
if ((card->usrParam.cardVoltage != NULL) && (card->usrParam.cardVoltage->cardSignalLine3V3 != NULL))
{
card->usrParam.cardVoltage->cardSignalLine3V3();
}
else
{
SDMMCHOST_SWITCH_VOLTAGE180V(card->host.base, false);
}
card->operationVoltage = kCARD_OperationVoltage330V;
/* allow user select the work voltage, if not select, sdmmc will handle it automatically */
if (kSDMMCHOST_SupportV180 != SDMMCHOST_NOT_SUPPORT)
{
applicationCommand41Argument |= SDMMC_MASK(kSD_OcrSwitch18RequestFlag);
}
do
{
/* card go idle */
if (kStatus_Success != SD_GoIdle(card))
{
error = kStatus_SDMMC_GoIdleFailed;
break;
}
/* Check card's supported interface condition. */
if (kStatus_Success == SD_SendInterfaceCondition(card))
{
/* SDHC or SDXC card */
applicationCommand41Argument |= SDMMC_MASK(kSD_OcrHostCapacitySupportFlag);
card->flags |= kSD_SupportSdhcFlag;
}
else
{
/* SDSC card */
if (kStatus_Success != SD_GoIdle(card))
{
error = kStatus_SDMMC_GoIdleFailed;
break;
}
}
/* Set card interface condition according to SDHC capability and card's supported interface condition. */
if (kStatus_Success != SD_ApplicationSendOperationCondition(card, applicationCommand41Argument))
{
error = kStatus_SDMMC_HandShakeOperationConditionFailed;
break;
}
/* check if card support 1.8V */
if ((card->flags & kSD_SupportVoltage180v))
{
error = SD_SwitchVoltage(card);
if (kStatus_SDMMC_SwitchVoltageFail == error)
{
break;
}
if (error == kStatus_SDMMC_SwitchVoltage18VFail33VSuccess)
{
applicationCommand41Argument &= ~SDMMC_MASK(kSD_OcrSwitch18RequestFlag);
card->flags &= ~kSD_SupportVoltage180v;
continue;
}
else
{
card->operationVoltage = kCARD_OperationVoltage180V;
break;
}
}
break;
} while (1U);
return error;
}
status_t SD_CardInit(sd_card_t *card)
{
assert(card);
assert(card->isHostReady == true);
/* reset variables */
card->flags = 0U;
/* set DATA bus width */
SDMMCHOST_SET_CARD_BUS_WIDTH(card->host.base, kSDMMCHOST_DATABUSWIDTH1BIT);
/*set card freq to 400KHZ*/
card->busClock_Hz = SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SDMMC_CLOCK_400KHZ);
/* send card active */
SDMMCHOST_SEND_CARD_ACTIVE(card->host.base, 100U);
/* Get host capability. */
GET_SDMMCHOST_CAPABILITY(card->host.base, &(card->host.capability));
/* probe bus voltage*/
if (SD_ProbeBusVoltage(card) == kStatus_SDMMC_SwitchVoltageFail)
{
return kStatus_SDMMC_SwitchVoltageFail;
}
/* Initialize card if the card is SD card. */
if (kStatus_Success != SD_AllSendCid(card))
{
return kStatus_SDMMC_AllSendCidFailed;
}
if (kStatus_Success != SD_SendRca(card))
{
return kStatus_SDMMC_SendRelativeAddressFailed;
}
if (kStatus_Success != SD_SendCsd(card))
{
return kStatus_SDMMC_SendCsdFailed;
}
if (kStatus_Success != SD_SelectCard(card, true))
{
return kStatus_SDMMC_SelectCardFailed;
}
/* Set to max frequency in non-high speed mode. */
card->busClock_Hz = SDMMCHOST_SET_CARD_CLOCK(card->host.base, card->host.sourceClock_Hz, SD_CLOCK_25MHZ);
if (kStatus_Success != SD_SendScr(card))
{
return kStatus_SDMMC_SendScrFailed;
}
/* Set to 4-bit data bus mode. */
if (((card->host.capability.flags) & kSDMMCHOST_Support4BitBusWidth) && (card->flags & kSD_Support4BitWidthFlag))
{
if (kStatus_Success != SD_SetDataBusWidth(card, kSD_DataBusWidth4Bit))
{
return kStatus_SDMMC_SetDataBusWidthFailed;
}
SDMMCHOST_SET_CARD_BUS_WIDTH(card->host.base, kSDMMCHOST_DATABUSWIDTH4BIT);
}
/* set block size */
if (SD_SetBlockSize(card, FSL_SDMMC_DEFAULT_BLOCK_SIZE))
{
return kStatus_SDMMC_SetCardBlockSizeFailed;
}
/* select bus timing */
if (kStatus_Success != SD_SelectBusTiming(card))
{
return kStatus_SDMMC_SwitchBusTimingFailed;
}
/* try to get card current status */
SD_ReadStatus(card);
return kStatus_Success;
}
void SD_CardDeinit(sd_card_t *card)
{
assert(card);
SD_SelectCard(card, false);
}
status_t SD_HostInit(sd_card_t *card)
{
assert(card);
if ((!card->isHostReady) && SDMMCHOST_Init(&(card->host), (void *)(&(card->usrParam))) != kStatus_Success)
{
return kStatus_Fail;
}
/* set the host status flag, after the card re-plug in, don't need init host again */
card->isHostReady = true;
return kStatus_Success;
}
void SD_HostDeinit(sd_card_t *card)
{
assert(card);
SDMMCHOST_Deinit(&(card->host));
/* should re-init host */
card->isHostReady = false;
}
void SD_HostReset(SDMMCHOST_CONFIG *host)
{
SDMMCHOST_Reset(host->base);
}
void SD_PowerOnCard(SDMMCHOST_TYPE *base, const sdmmchost_pwr_card_t *pwr)
{
SDMMCHOST_PowerOnCard(base, pwr);
}
void SD_PowerOffCard(SDMMCHOST_TYPE *base, const sdmmchost_pwr_card_t *pwr)
{
SDMMCHOST_PowerOffCard(base, pwr);
}
status_t SD_WaitCardDetectStatus(SDMMCHOST_TYPE *hostBase, const sdmmchost_detect_card_t *cd, bool waitCardStatus)
{
return SDMMCHOST_WaitCardDetectStatus(hostBase, cd, waitCardStatus);
}
bool SD_IsCardPresent(sd_card_t *card)
{
return SDMMCHOST_IsCardPresent();
}
status_t SD_Init(sd_card_t *card)
{
assert(card);
if (!card->isHostReady)
{
if (SD_HostInit(card) != kStatus_Success)
{
return kStatus_SDMMC_HostNotReady;
}
}
else
{
SD_HostReset(&(card->host));
}
SD_PowerOffCard(card->host.base, card->usrParam.pwr);
if (SD_WaitCardDetectStatus(card->host.base, card->usrParam.cd, true) != kStatus_Success)
{
return kStatus_SDMMC_CardDetectFailed;
}
SD_PowerOnCard(card->host.base, card->usrParam.pwr);
return SD_CardInit(card);
}
void SD_Deinit(sd_card_t *card)
{
/* card deinitialize */
SD_CardDeinit(card);
/* host deinitialize */
SD_HostDeinit(card);
}
Copy Permalink