rt-thread-official/bsp/nuvoton/numaker-pfm-m487/board/Kconfig

181 lines
5.9 KiB
Plaintext
Raw Normal View History

menu "Hardware Drivers Config"
menu "On-chip Peripheral Drivers"
source "$BSP_DIR/../libraries/m480/rtt_port/Kconfig"
endmenu
menu "On-board Peripheral Drivers"
config BSP_USING_NULINKME
bool "Enable UART0 for RTT Console(uart0)"
select BSP_USING_UART
select BSP_USING_UART0
default y
config BOARD_USING_IP101GR
bool "Enable ethernet phy supporting(over emac/mdio)"
select BSP_USING_EMAC
default n
config BOARD_USING_NAU88L25
bool "NAU88L25 Audio Codec supporting(over i2s, i2c2)"
select NU_PKG_USING_NAU88L25
select BSP_USING_I2C2
select BSP_USING_I2S
select BSP_USING_I2S0
default n
config BOARD_USING_STORAGE_SDCARD
bool "SDCARD supporting(over sdh0)"
select BSP_USING_SDH
select BSP_USING_SDH0
default n
config BOARD_USING_STORAGE_SPIFLASH
bool "SPIFLASH supporting(over qspi0)"
select BSP_USING_QSPI
select BSP_USING_QSPI0
default y
config BOARD_USING_USB_D_H
bool "Enable USB Device or Host function"
help
Choose this option if you need USB function.
if BOARD_USING_USB_D_H
choice
prompt "Select FS/HS USB Ports"
config BOARD_USING_HSUSBD
select BSP_USING_HSUSBD
bool "Enable HSUSBD(over USB2.0)"
help
Choose this option if you need HSUSBD function mode.
config BOARD_USING_HSUSBD_USBH
select BSP_USING_USBH
select BSP_USING_HSUSBD
bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
help
Choose this option if you need HSUSBD and USBH function mode at the same time.
config BOARD_USING_HSUSBH
select BSP_USING_HSUSBH
bool "Enable HSUSBH(over USB2.0)"
help
Choose this option if you need HSUSBH function mode.
config BOARD_USING_HSUSBH_USBD
select BSP_USING_HSUSBH
select BSP_USING_USBD
bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
help
Choose this option if you need HSUSBH and USBD function mode at the same time.
config BOARD_USING_HSOTG
select BSP_USING_HSOTG
bool "Enable HSOTG(over USB2.0)"
help
Choose this option if you need HSOTG function mode.
endchoice
endif
endmenu
menu "Board extended module drivers"
config BOARD_USING_ADVANCE_V4
bool "Use BOARD_USING_ADVANCE_V4 board"
default n
if BOARD_USING_ADVANCE_V4
config BOARD_USING_MAX31875
bool "MAX31875 Temperature sensor(over i2c1)"
select NU_PKG_USING_MAX31875
select BSP_USING_I2C1
default n
config BOARD_USING_MPU6500
bool "MPU6500 6-axis sensor(over i2c2)"
select PKG_USING_SENSORS_DRIVERS
select PKG_USING_MPU6XXX
select PKG_USING_MPU6XXX_LATEST_VERSION
select PKG_USING_MPU6XXX_ACCE
select PKG_USING_MPU6XXX_GYRO
select BSP_USING_I2C2
default n
config BOARD_USING_LCD_ILI9341
bool "LCD ILI9341(over ebi0)"
select RT_USING_TOUCH
select BSP_USING_EADC
select BSP_USING_EADC0
select NU_PKG_USING_ADC_TOUCH
select NU_PKG_USING_ADC_TOUCH_SW
select NU_PKG_USING_ILI9341
select NU_PKG_USING_ILI9341_EBI
select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
select NU_PKG_ILI9341_HORIZONTAL
default n
if BOARD_USING_LCD_ILI9341
config BOARD_USING_ILI9341_EBI_PORT
int "Specify EBI port index"
range 0 2
default 0
config BOARD_USING_ILI9341_PIN_BACKLIGHT
int "Specify the pin index of backlight pin index"
range 0 127
default 23
config BOARD_USING_ILI9341_PIN_RESET
int "Specify the pin index of reset pin index"
range 0 127
default 22
config BOARD_USING_ILI9341_PIN_DC
int "Specify the pin index of data&command switching"
range 0 127
default 115
endif
config BOARD_USING_AT24LC64
bool "AT24LC64 EEPROM(over i2c2)"
select BSP_USING_I2C
select BSP_USING_I2C2
select PKG_USING_AT24CXX
default n
config BOARD_USING_SRAM0_AS_MEMHEAP
bool "EBI SRAM supporting(over ebi1)"
select BSP_USING_EBI
select RT_USING_MEMHEAP
select RT_USING_MEMHEAP_AS_HEAP
default n
if BOARD_USING_SRAM0_AS_MEMHEAP
config NU_EBI_SRAM0_SIZE
hex "SRAM capacity(In byte)"
range 0x200 0x100000
default 0x80000
depends on BSP_USING_EBI_BANK0
endif
config BOARD_USING_BUZZER
bool "BUZZER.(over bpwm0_ch5)"
select BSP_USING_BPWM
select BSP_USING_BPWM0
default n
endif
endmenu
source "$BSP_DIR/../libraries/nu_packages/Kconfig"
endmenu