rt-thread-official/libcpu/Kconfig

config ARCH_CPU_64BIT
    bool

config RT_USING_CACHE
    bool
    default n

config ARCH_CPU_BIG_ENDIAN
    bool

config ARCH_ARM_BOOTWITH_FLUSH_CACHE
    bool
    default n

config ARCH_CPU_STACK_GROWS_UPWARD
    bool
    default n

config RT_USING_CPU_FFS
    bool
    default n

config ARCH_MM_MMU
    bool

config ARCH_MM_MPU
    bool

config ARCH_ARM
    bool

config ARCH_ARM_CORTEX_M
    bool
    select ARCH_ARM

config ARCH_ARM_CORTEX_FPU
    bool

config ARCH_ARM_CORTEX_SECURE
    bool

config ARCH_ARM_CORTEX_M0
    bool
    select ARCH_ARM_CORTEX_M

config ARCH_ARM_CORTEX_M3
    bool
    select ARCH_ARM_CORTEX_M
    select RT_USING_CPU_FFS

config ARCH_ARM_MPU
    bool
    depends on ARCH_ARM
    select ARCH_MM_MPU

config ARCH_ARM_CORTEX_M4
    bool
    select ARCH_ARM_CORTEX_M
    select RT_USING_CPU_FFS

config ARCH_ARM_CORTEX_M7
    bool
    select ARCH_ARM_CORTEX_M
    select RT_USING_CPU_FFS
    select RT_USING_CACHE

config ARCH_ARM_CORTEX_M33
    bool
    select ARCH_ARM_CORTEX_M
    select RT_USING_CPU_FFS

config ARCH_ARM_CORTEX_R
    bool
    select ARCH_ARM

config ARCH_ARM_MMU
    bool
    select RT_USING_CACHE
    select ARCH_MM_MMU
    depends on ARCH_ARM

if RT_USING_SMART
config KERNEL_VADDR_START
    hex "The virtural address of kernel start"
    default 0xffff000000000000 if ARCH_ARMV8
    default 0xc0000000 if ARCH_ARM
    default 0x80000000 if ARCH_RISCV
    depends on ARCH_MM_MMU

config RT_IOREMAP_LATE
    bool "Support to create IO mapping in the kernel address space after system initlalization."
    default n
    depends on ARCH_ARM_CORTEX_A
    depends on ARCH_MM_MMU
endif

config ARCH_ARM_ARM9
    bool
    select ARCH_ARM

config ARCH_ARM_ARM11
    bool
    select ARCH_ARM

config ARCH_ARM_CORTEX_A
    bool
    select ARCH_ARM
    select ARCH_ARM_MMU
    select RT_USING_CPU_FFS

    if ARCH_ARM_CORTEX_A
        config RT_SMP_AUTO_BOOT
            bool
            default n

        config RT_USING_GIC_V2
            bool
            default n

        config RT_USING_GIC_V3
            bool
            default n

        config RT_NO_USING_GIC
            bool
            default y if !RT_USING_GIC_V2 && !RT_USING_GIC_V3
    endif

config ARCH_ARM_CORTEX_A5
    bool
    select ARCH_ARM_CORTEX_A

config ARCH_ARM_CORTEX_A7
    bool
    select ARCH_ARM_CORTEX_A

config ARCH_ARM_CORTEX_A8
    bool
    select ARCH_ARM_CORTEX_A

config ARCH_ARM_CORTEX_A9
    bool
    select ARCH_ARM_CORTEX_A

config ARCH_ARM_SECURE_MODE
    bool "Running in secure mode [ARM Cortex-A]"
    default n
    depends on ARCH_ARM_CORTEX_A

config RT_BACKTRACE_FUNCTION_NAME
    bool "To show function name when backtrace."
    default n
    depends on ARCH_ARM_CORTEX_A

config ARCH_ARMV8
    bool
    select ARCH_ARM
    select ARCH_ARM_MMU

config ARCH_MIPS
    bool

config ARCH_MIPS64
    bool
    select ARCH_CPU_64BIT

config ARCH_MIPS_XBURST
    bool
    select ARCH_MIPS

config ARCH_ANDES
    bool

config ARCH_CSKY
    bool

config ARCH_POWERPC
    bool

config ARCH_RISCV
    bool

config ARCH_RISCV_FPU
    bool

config ARCH_RISCV_FPU_S
    select ARCH_RISCV_FPU
    bool

config ARCH_RISCV_FPU_D
    select ARCH_RISCV_FPU
    bool

config ARCH_RISCV32
    select ARCH_RISCV
    bool

config ARCH_RISCV64
    select ARCH_RISCV
    select ARCH_CPU_64BIT
    bool

config ARCH_IA32
    bool

config ARCH_TIDSP
    bool

config ARCH_TIDSP_C28X
    bool
    select ARCH_TIDSP
    select ARCH_CPU_STACK_GROWS_UPWARD

config ARCH_HOST_SIMULATOR
    bool

config ARCH_CPU_STACK_GROWS_UPWARD
    bool
    default n
[Kernel] Add 64bit CPU support. 2018-10-26 06:35:42 +08:00			`config ARCH_CPU_64BIT`
			`bool`

sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`config RT_USING_CACHE`
			`bool`
			`default n`

[Kconfig][libcpu] 增加ARCH_CPU_BIG_ENDIAN (#5547) * [cpu] 增加ARCH_CPU_BIG_ENDIAN - 之前RT_USING_BIG_ENDIAN的命名并不合理，予以替换为ARCH_CPU_BIG_ENDIAN - 删除一处多余的ARCH_CPU_64BIT - 整理了libcpu/Kconfig的格式 * [libcpu][Kconfig] Cortex-M4&7 select ARCH_ARM_CORTEX_FPU * revert last commit 2022-01-25 15:00:47 +08:00			`config ARCH_CPU_BIG_ENDIAN`
			`bool`

sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`config ARCH_ARM_BOOTWITH_FLUSH_CACHE`
			`bool`
			`default n`

			`config ARCH_CPU_STACK_GROWS_UPWARD`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`bool`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`default n`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
对CM3,CM4,CM7 自动开启RT_USING_CPU_FFS 2019-05-28 21:30:45 +08:00			`config RT_USING_CPU_FFS`
			`bool`
			`default n`

sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`config ARCH_MM_MMU`
			`bool`

			`config ARCH_MM_MPU`
			`bool`

			`config ARCH_ARM`
			`bool`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_ARM_CORTEX_M`
			`bool`
			`select ARCH_ARM`

[BSP] Enable memory pool for i.MXRT1050-EVK. 2018-09-22 22:22:18 +08:00			`config ARCH_ARM_CORTEX_FPU`
			`bool`

支持只运行在安全模式下 (#6115) * [cpu][cm33] Support running in secure mode * [bsp][lpc55sxx] Using the cortex cm33 2022-06-29 14:08:57 +08:00			`config ARCH_ARM_CORTEX_SECURE`
			`bool`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_ARM_CORTEX_M0`
			`bool`
			`select ARCH_ARM_CORTEX_M`

			`config ARCH_ARM_CORTEX_M3`
			`bool`
			`select ARCH_ARM_CORTEX_M`
对CM3,CM4,CM7 自动开启RT_USING_CPU_FFS 2019-05-28 21:30:45 +08:00			`select RT_USING_CPU_FFS`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
			`config ARCH_ARM_MPU`
			`bool`
			`depends on ARCH_ARM`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`select ARCH_MM_MPU`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
			`config ARCH_ARM_CORTEX_M4`
			`bool`
			`select ARCH_ARM_CORTEX_M`
对CM3,CM4,CM7 自动开启RT_USING_CPU_FFS 2019-05-28 21:30:45 +08:00			`select RT_USING_CPU_FFS`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
			`config ARCH_ARM_CORTEX_M7`
			`bool`
			`select ARCH_ARM_CORTEX_M`
对CM3,CM4,CM7 自动开启RT_USING_CPU_FFS 2019-05-28 21:30:45 +08:00			`select RT_USING_CPU_FFS`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`select RT_USING_CACHE`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
[libcpu] Add CM33 (#5761) 2022-04-01 22:45:11 +08:00			`config ARCH_ARM_CORTEX_M33`
			`bool`
			`select ARCH_ARM_CORTEX_M`
			`select RT_USING_CPU_FFS`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_ARM_CORTEX_R`
			`bool`
			`select ARCH_ARM`

			`config ARCH_ARM_MMU`
			`bool`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`select RT_USING_CACHE`
			`select ARCH_MM_MMU`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`depends on ARCH_ARM`

[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 (#6740) * [dfs] sync cromfs * [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration * [format] fix some format issue. 2022-12-16 18:38:28 +08:00			`if RT_USING_SMART`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`config KERNEL_VADDR_START`
			`hex "The virtural address of kernel start"`
[smart/aarch64] code sync (#6750) * [smart/aarch64] sync aarch64 2022-12-20 17:49:37 +08:00			`default 0xffff000000000000 if ARCH_ARMV8`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`default 0xc0000000 if ARCH_ARM`
			`default 0x80000000 if ARCH_RISCV`
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 (#6740) * [dfs] sync cromfs * [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration * [format] fix some format issue. 2022-12-16 18:38:28 +08:00			`depends on ARCH_MM_MMU`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00
			`config RT_IOREMAP_LATE`
			`bool "Support to create IO mapping in the kernel address space after system initlalization."`
			`default n`
			`depends on ARCH_ARM_CORTEX_A`
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 (#6740) * [dfs] sync cromfs * [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration * [format] fix some format issue. 2022-12-16 18:38:28 +08:00			`depends on ARCH_MM_MMU`
			`endif`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00
[libcpu] Add ARCH_ARM_ARM9/11 type 2017-12-19 17:39:23 +08:00			`config ARCH_ARM_ARM9`
			`bool`
			`select ARCH_ARM`

			`config ARCH_ARM_ARM11`
			`bool`
			`select ARCH_ARM`

[BSP] add i.MX 6UL BSP 2017-11-01 13:30:17 +08:00			`config ARCH_ARM_CORTEX_A`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`bool`
			`select ARCH_ARM`
Add ADT Kconfig and fix MMU kconfig issue in Cortex-A (#6901) * Add ADT Kconfig and fix MMU kconfig issue in Cortex-A * [BSP] enable ADT 2023-02-06 01:11:04 +08:00			`select ARCH_ARM_MMU`
[update] 整理cortex-a kconfig菜单，并更新相关BSP的配置。 2021-05-24 17:19:05 +08:00			`select RT_USING_CPU_FFS`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
[add] 添加gicv3中断控制器代码，更新menuconfig配置选项与utest的config.h 2021-05-01 19:15:37 +08:00			`if ARCH_ARM_CORTEX_A`
			`config RT_SMP_AUTO_BOOT`
			`bool`
			`default n`

[update] 整理cortex-a kconfig菜单，并更新相关BSP的配置。 2021-05-24 17:19:05 +08:00			`config RT_USING_GIC_V2`
			`bool`
			`default n`
[add] 添加gicv3中断控制器代码，更新menuconfig配置选项与utest的config.h 2021-05-01 19:15:37 +08:00
[update] 整理cortex-a kconfig菜单，并更新相关BSP的配置。 2021-05-24 17:19:05 +08:00			`config RT_USING_GIC_V3`
			`bool`
			`default n`
[add] 添加gicv3中断控制器代码，更新menuconfig配置选项与utest的config.h 2021-05-01 19:15:37 +08:00
[update] 整理cortex-a kconfig菜单，并更新相关BSP的配置。 2021-05-24 17:19:05 +08:00			`config RT_NO_USING_GIC`
			`bool`
			`default y if !RT_USING_GIC_V2 && !RT_USING_GIC_V3`
[add] 添加gicv3中断控制器代码，更新menuconfig配置选项与utest的config.h 2021-05-01 19:15:37 +08:00			`endif`

[BSP] add i.MX 6UL BSP 2017-11-01 13:30:17 +08:00			`config ARCH_ARM_CORTEX_A5`
			`bool`
			`select ARCH_ARM_CORTEX_A`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_ARM_CORTEX_A7`
			`bool`
[BSP] add i.MX 6UL BSP 2017-11-01 13:30:17 +08:00			`select ARCH_ARM_CORTEX_A`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
			`config ARCH_ARM_CORTEX_A8`
			`bool`
[BSP] add i.MX 6UL BSP 2017-11-01 13:30:17 +08:00			`select ARCH_ARM_CORTEX_A`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
			`config ARCH_ARM_CORTEX_A9`
			`bool`
[BSP] add i.MX 6UL BSP 2017-11-01 13:30:17 +08:00			`select ARCH_ARM_CORTEX_A`
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`config ARCH_ARM_SECURE_MODE`
			`bool "Running in secure mode [ARM Cortex-A]"`
			`default n`
			`depends on ARCH_ARM_CORTEX_A`

			`config RT_BACKTRACE_FUNCTION_NAME`
			`bool "To show function name when backtrace."`
			`default n`
			`depends on ARCH_ARM_CORTEX_A`

rename raspi4 to raspi4-64 2020-05-25 17:46:48 +08:00			`config ARCH_ARMV8`
			`bool`
sync branch rt-smart. (#6641) * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <zhangbingru@rt-thread.com> Co-authored-by: zhkag <zhkag@foxmail.com> 2022-12-03 12:07:44 +08:00			`select ARCH_ARM`
[smart/aarch64] code sync (#6750) * [smart/aarch64] sync aarch64 2022-12-20 17:49:37 +08:00			`select ARCH_ARM_MMU`
rename raspi4 to raspi4-64 2020-05-25 17:46:48 +08:00
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_MIPS`
			`bool`

add ls2k bsp 2020-04-05 13:29:29 +08:00			`config ARCH_MIPS64`
			`bool`
[Kconfig][libcpu] 增加ARCH_CPU_BIG_ENDIAN (#5547) * [cpu] 增加ARCH_CPU_BIG_ENDIAN - 之前RT_USING_BIG_ENDIAN的命名并不合理，予以替换为ARCH_CPU_BIG_ENDIAN - 删除一处多余的ARCH_CPU_64BIT - 整理了libcpu/Kconfig的格式 * [libcpu][Kconfig] Cortex-M4&7 select ARCH_ARM_CORTEX_FPU * revert last commit 2022-01-25 15:00:47 +08:00			`select ARCH_CPU_64BIT`
add ls2k bsp 2020-04-05 13:29:29 +08:00
Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_MIPS_XBURST`
			`bool`
			`select ARCH_MIPS`

			`config ARCH_ANDES`
			`bool`

			`config ARCH_CSKY`
			`bool`

			`config ARCH_POWERPC`
			`bool`

			`config ARCH_RISCV`
			`bool`

[Kernel] Add 64bit CPU support. 2018-10-26 06:35:42 +08:00			`config ARCH_RISCV_FPU`
			`bool`

[libcpu/risc-v][K210] add FPU support 2020-11-20 12:05:37 +08:00			`config ARCH_RISCV_FPU_S`
			`select ARCH_RISCV_FPU`
			`bool`

			`config ARCH_RISCV_FPU_D`
			`select ARCH_RISCV_FPU`
			`bool`

[Kernel] Add 64bit CPU support. 2018-10-26 06:35:42 +08:00			`config ARCH_RISCV32`
			`select ARCH_RISCV`
			`bool`

			`config ARCH_RISCV64`
			`select ARCH_RISCV`
			`select ARCH_CPU_64BIT`
			`bool`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_IA32`
			`bool`

[bsp][tms320f28379d] Classify c28x into ti-dsp 2018-11-24 17:41:55 +08:00			`config ARCH_TIDSP`
[bsp][tms320f28379d] Add support of Kconfig 2018-11-18 12:06:52 +08:00			`bool`
[bsp][tms320f28379d] Classify c28x into ti-dsp 2018-11-24 17:41:55 +08:00
			`config ARCH_TIDSP_C28X`
			`bool`
			`select ARCH_TIDSP`
[bsp][tms320f28379d] Add support of Kconfig 2018-11-18 12:06:52 +08:00			`select ARCH_CPU_STACK_GROWS_UPWARD`

Update Kconfig. 1. Add IPADDR/GWADDR etc; 2. Add Kconfig for libcpu. 2017-10-31 09:54:23 +08:00			`config ARCH_HOST_SIMULATOR`
			`bool`
[Kernel] Add ARCH_CPU_STACK_GROWS_UPWARD option 2018-11-11 15:56:02 +08:00
			`config ARCH_CPU_STACK_GROWS_UPWARD`
			`bool`
			`default n`