rt-thread-official/bsp/stm32l476-nucleo/drivers/usart.c

/*
 * File      : usart.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Change Logs:
 * Date           Author       Notes
 * 2009-01-05     Bernard      the first version
 */

#include <stm32l4xx.h>
#include "usart.h"
#include "board.h"

#include <rtdevice.h>

#ifdef RT_USING_UART1
#define USART1_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOA_CLK_ENABLE()
#define USART1_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOA_CLK_ENABLE()

/* Definition for USART1 Pins */
#define USART1_TX_PIN                    GPIO_PIN_9
#define USART1_TX_GPIO_PORT              GPIOA
#define USART1_TX_AF                     GPIO_AF7_USART1
#define USART1_RX_PIN                    GPIO_PIN_10
#define USART1_RX_GPIO_PORT              GPIOA
#define USART1_RX_AF                     GPIO_AF7_USART1
#endif

#ifdef RT_USING_UART2
#define USART2_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOA_CLK_ENABLE()
#define USART2_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOA_CLK_ENABLE()

/* Definition for USART2 Pins */
#define USART2_TX_PIN                    GPIO_PIN_2
#define USART2_TX_GPIO_PORT              GPIOA
#define USART2_TX_AF                     GPIO_AF7_USART2
#define USART2_RX_PIN                    GPIO_PIN_3
#define USART2_RX_GPIO_PORT              GPIOA
#define USART2_RX_AF                     GPIO_AF7_USART2
#endif

#ifdef RT_USING_UART3
#define USART3_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOB_CLK_ENABLE()
#define USART3_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOB_CLK_ENABLE()

/* Definition for USART3 Pins */
#define USART3_TX_PIN                    GPIO_PIN_10
#define USART3_TX_GPIO_PORT              GPIOB
#define USART3_TX_AF                     GPIO_AF7_USART3
#define USART3_RX_PIN                    GPIO_PIN_11
#define USART3_RX_GPIO_PORT              GPIOB
#define USART3_RX_AF                     GPIO_AF7_USART3
#endif

#ifdef RT_USING_UART4
#define USART4_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOC_CLK_ENABLE()
#define USART4_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOC_CLK_ENABLE()

/* Definition for USART4 Pins */
#define USART4_TX_PIN                    GPIO_PIN_10
#define USART4_TX_GPIO_PORT              GPIOC
#define USART4_TX_AF                     GPIO_AF7_USART4
#define USART4_RX_PIN                    GPIO_PIN_11
#define USART4_RX_GPIO_PORT              GPIOC
#define USART4_RX_AF                     GPIO_AF7_USART4
#endif

#ifdef RT_USING_UART5
#define USART5_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOD_CLK_ENABLE()
#define USART5_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOC_CLK_ENABLE()

/* Definition for USART5 Pins */
#define USART5_TX_PIN                    GPIO_PIN_12
#define USART5_TX_GPIO_PORT              GPIOC
#define USART5_TX_AF                     GPIO_AF7_USART5
#define USART5_RX_PIN                    GPIO_PIN_2
#define USART5_RX_GPIO_PORT              GPIOD
#define USART5_RX_AF                     GPIO_AF7_USART5
#endif

#ifdef RT_USING_LPUART1
#define LPUART1_RX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOC_CLK_ENABLE()
#define LPUART1_TX_GPIO_CLK_ENABLE()      __HAL_RCC_GPIOC_CLK_ENABLE()

/* Definition for LPUART1 Pins */
#define LPUART1_TX_PIN                    GPIO_PIN_0
#define LPUART1_TX_GPIO_PORT              GPIOC
#define LPUART1_TX_AF                     GPIO_AF8_LPUART1
#define LPUART1_RX_PIN                    GPIO_PIN_1
#define LPUART1_RX_GPIO_PORT              GPIOC
#define LPUART1_RX_AF                     GPIO_AF8_LPUART1
#endif

/* STM32 uart driver */
struct stm32_uart
{
    UART_HandleTypeDef UartHandle;
    IRQn_Type irq;
};

static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
    struct stm32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    RT_ASSERT(cfg != RT_NULL);

    uart = (struct stm32_uart *)serial->parent.user_data;

    uart->UartHandle.Init.BaudRate   = cfg->baud_rate;
    uart->UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
    uart->UartHandle.Init.Mode       = UART_MODE_TX_RX;
    uart->UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;

    switch (cfg->data_bits)
    {
    case DATA_BITS_8:
        uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
        break;
    case DATA_BITS_9:
        uart->UartHandle.Init.WordLength = UART_WORDLENGTH_9B;
        break;
    default:
        uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
        break;
    }
    
    switch (cfg->stop_bits)
    {
    case STOP_BITS_1:
        uart->UartHandle.Init.StopBits   = UART_STOPBITS_1;
        break;
    case STOP_BITS_2:
        uart->UartHandle.Init.StopBits   = UART_STOPBITS_2;
        break;
    default:
        uart->UartHandle.Init.StopBits   = UART_STOPBITS_1;
        break;
    }
    
    switch (cfg->parity)
    {
    case PARITY_NONE:
        uart->UartHandle.Init.Parity     = UART_PARITY_NONE;
        break;
    case PARITY_ODD:
        uart->UartHandle.Init.Parity     = UART_PARITY_ODD;
        break;
    case PARITY_EVEN:
        uart->UartHandle.Init.Parity     = UART_PARITY_EVEN;
        break;
    default:
        uart->UartHandle.Init.Parity     = UART_PARITY_NONE;
        break;
    }
  
    if (HAL_UART_Init(&uart->UartHandle) != HAL_OK)
    {
        return RT_ERROR;
    }

    if (uart->UartHandle.Instance == LPUART1)
    {
        static UART_WakeUpTypeDef WakeUpSelection; 
        WakeUpSelection.WakeUpEvent = UART_WAKEUP_ON_READDATA_NONEMPTY;
        
        if (HAL_UARTEx_StopModeWakeUpSourceConfig(&uart->UartHandle, WakeUpSelection)!= HAL_OK)
        {
            return RT_ERROR; 
        }
        HAL_UARTEx_EnableStopMode(&uart->UartHandle);
    }
  
    return RT_EOK;
}

static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
	struct stm32_uart *uart;

	RT_ASSERT(serial != RT_NULL);
	uart = (struct stm32_uart *)serial->parent.user_data;

	switch (cmd)
	{
	case RT_DEVICE_CTRL_CLR_INT:
	  /* disable rx irq */
	  NVIC_DisableIRQ(uart->irq);
	  /* disable interrupt */
	  __HAL_UART_DISABLE_IT(&uart->UartHandle, UART_IT_RXNE);
	  break;
	case RT_DEVICE_CTRL_SET_INT:
	  /* enable rx irq */
	  NVIC_EnableIRQ(uart->irq);
	  /* enable interrupt */
	  __HAL_UART_ENABLE_IT(&uart->UartHandle, UART_IT_RXNE);
	  break;
	}

  	return RT_EOK;
}

static int stm32_putc(struct rt_serial_device *serial, char c)
{
    struct stm32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    uart = (struct stm32_uart *)serial->parent.user_data;

    while((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_TXE) == RESET));
    uart->UartHandle.Instance->TDR = c;
    return 1;
}

static int stm32_getc(struct rt_serial_device *serial)
{
    int ch;
    struct stm32_uart *uart;

    RT_ASSERT(serial != RT_NULL);
    uart = (struct stm32_uart *)serial->parent.user_data;

    ch = -1;
    if (__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET)
        ch = uart->UartHandle.Instance->RDR & 0xff;
    return ch;
}

/**
 * Uart common interrupt process. This need add to uart ISR.
 *
 * @param serial serial device
 */
static void uart_isr(struct rt_serial_device *serial)
{
    struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;

    RT_ASSERT(uart != RT_NULL);

    /* UART in mode Receiver -------------------------------------------------*/
    if ((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET) &&
            (__HAL_UART_GET_IT_SOURCE(&uart->UartHandle, UART_IT_RXNE) != RESET))
    {
        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
        /* Clear RXNE interrupt flag */
        __HAL_UART_CLEAR_FLAG(&uart->UartHandle, UART_FLAG_RXNE);
    }
}

/**
* @brief UART MSP Initialization
*        This function configures the hardware resources used in this example:
*           - Peripheral's clock enable
*           - Peripheral's GPIO Configuration
*           - NVIC configuration for UART interrupt request enable
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
    GPIO_InitTypeDef  GPIO_InitStruct;

#if defined(RT_USING_UART1)
    if (huart->Instance == USART1)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        USART1_TX_GPIO_CLK_ENABLE();
        USART1_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_USART1_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = USART1_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = USART1_TX_AF;

        HAL_GPIO_Init(USART1_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = USART1_RX_PIN;
        GPIO_InitStruct.Alternate = USART1_RX_AF;

        HAL_GPIO_Init(USART1_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(USART1_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(USART1_IRQn);
    }
#endif

#if defined(RT_USING_UART2)
    if (huart->Instance == USART2)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        USART2_TX_GPIO_CLK_ENABLE();
        USART2_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_USART2_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = USART2_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = USART2_TX_AF;

        HAL_GPIO_Init(USART2_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = USART2_RX_PIN;
        GPIO_InitStruct.Alternate = USART2_RX_AF;

        HAL_GPIO_Init(USART2_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(USART2_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(USART2_IRQn);
    }
#endif

#if defined(RT_USING_UART3)
    if (huart->Instance == USART3)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        USART3_TX_GPIO_CLK_ENABLE();
        USART3_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_USART3_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = USART3_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = USART3_TX_AF;

        HAL_GPIO_Init(USART3_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = USART3_RX_PIN;
        GPIO_InitStruct.Alternate = USART3_RX_AF;

        HAL_GPIO_Init(USART3_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(USART3_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(USART3_IRQn);
    }
#endif

#if defined(RT_USING_UART4)
    if (huart->Instance == USART4)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        USART4_TX_GPIO_CLK_ENABLE();
        USART4_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_USART4_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = USART4_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = USART4_TX_AF;

        HAL_GPIO_Init(USART4_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = USART4_RX_PIN;
        GPIO_InitStruct.Alternate = USART4_RX_AF;

        HAL_GPIO_Init(USART4_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(USART4_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(USART4_IRQn);
    }
#endif

#if defined(RT_USING_UART5)
    if (huart->Instance == USART5)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        USART5_TX_GPIO_CLK_ENABLE();
        USART5_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_USART5_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = USART5_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = USART5_TX_AF;

        HAL_GPIO_Init(USART5_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = USART5_RX_PIN;
        GPIO_InitStruct.Alternate = USART5_RX_AF;

        HAL_GPIO_Init(USART5_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(USART5_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(USART5_IRQn);
    }
#endif

#if defined(RT_USING_LPUART1)
    if (huart->Instance == LPUART1)
    {
        /*##-1- Enable peripherals and GPIO Clocks #################################*/
        /* Enable GPIO TX/RX clock */
        LPUART1_TX_GPIO_CLK_ENABLE();
        LPUART1_RX_GPIO_CLK_ENABLE();

        /* Enable USARTx clock */
        __HAL_RCC_LPUART1_CLK_ENABLE();

        /*##-2- Configure peripheral GPIO ##########################################*/
        /* UART TX GPIO pin configuration  */
        GPIO_InitStruct.Pin       = LPUART1_TX_PIN;
        GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull      = GPIO_PULLUP;
        GPIO_InitStruct.Speed     = GPIO_SPEED_FAST;
        GPIO_InitStruct.Alternate = LPUART1_TX_AF;

        HAL_GPIO_Init(LPUART1_TX_GPIO_PORT, &GPIO_InitStruct);

        /* UART RX GPIO pin configuration  */
        GPIO_InitStruct.Pin = LPUART1_RX_PIN;
        GPIO_InitStruct.Alternate = LPUART1_RX_AF;

        HAL_GPIO_Init(LPUART1_RX_GPIO_PORT, &GPIO_InitStruct);

        HAL_NVIC_SetPriority(LPUART1_IRQn, 0, 1);
        HAL_NVIC_EnableIRQ(LPUART1_IRQn);
    }
#endif
}

/**
* @brief UART MSP De-Initialization
*        This function frees the hardware resources used in this example:
*          - Disable the Peripheral's clock
*          - Revert GPIO and NVIC configuration to their default state
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
{
#if defined(RT_USING_UART1)
    if (huart->Instance == USART1)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_USART1_FORCE_RESET();
        __HAL_RCC_USART1_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(USART1_TX_GPIO_PORT, USART1_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(USART1_RX_GPIO_PORT, USART1_RX_PIN);

        HAL_NVIC_DisableIRQ(USART1_IRQn);
    }
#endif

#if defined(RT_USING_UART2)
    if (huart->Instance == USART2)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_USART2_FORCE_RESET();
        __HAL_RCC_USART2_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(USART2_TX_GPIO_PORT, USART2_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(USART2_RX_GPIO_PORT, USART2_RX_PIN);

        HAL_NVIC_DisableIRQ(USART2_IRQn);
    }
#endif

#if defined(RT_USING_UART3)
    if (huart->Instance == USART3)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_USART3_FORCE_RESET();
        __HAL_RCC_USART3_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(USART3_TX_GPIO_PORT, USART3_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(USART3_RX_GPIO_PORT, USART3_RX_PIN);

        HAL_NVIC_DisableIRQ(USART3_IRQn);
    }
#endif

#if defined(RT_USING_UART4)
    if (huart->Instance == USART4)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_USART4_FORCE_RESET();
        __HAL_RCC_USART4_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(USART4_TX_GPIO_PORT, USART4_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(USART4_RX_GPIO_PORT, USART4_RX_PIN);

        HAL_NVIC_DisableIRQ(USART4_IRQn);
    }
#endif

#if defined(RT_USING_UART5)
    if (huart->Instance == USART5)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_USART5_FORCE_RESET();
        __HAL_RCC_USART5_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(USART5_TX_GPIO_PORT, USART5_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(USART5_RX_GPIO_PORT, USART5_RX_PIN);

        HAL_NVIC_DisableIRQ(USART5_IRQn);
    }
#endif

#if defined(RT_USING_LPUART1)
    if (huart->Instance == LPUART1)
    {
        /*##-1- Reset peripherals ##################################################*/
        __HAL_RCC_LPUART1_FORCE_RESET();
        __HAL_RCC_LPUART1_RELEASE_RESET();

        /*##-2- Disable peripherals and GPIO Clocks #################################*/
        /* Configure UART Tx as alternate function  */
        HAL_GPIO_DeInit(LPUART1_TX_GPIO_PORT, LPUART1_TX_PIN);
        /* Configure UART Rx as alternate function  */
        HAL_GPIO_DeInit(LPUART1_RX_GPIO_PORT, LPUART1_RX_PIN);

        HAL_NVIC_DisableIRQ(LPUART1_IRQn);
    }
#endif
}


static const struct rt_uart_ops stm32_uart_ops =
{
    stm32_configure,
    stm32_control,
    stm32_putc,
    stm32_getc,
};

#if defined(RT_USING_UART1)
/* UART1 device driver structure */
struct stm32_uart uart1 =
{
    {USART1},
    USART1_IRQn,
};
struct rt_serial_device serial1;

void USART1_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial1);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART1 */

#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct stm32_uart uart2 =
{
    {USART2},
    USART2_IRQn,
};
struct rt_serial_device serial2;

void USART2_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial2);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART2 */

#if defined(RT_USING_UART3)
/* UART3 device driver structure */
struct stm32_uart uart3 =
{
    {USART3},
    USART3_IRQn,
};
struct rt_serial_device serial3;

void USART3_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial3);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART3 */

#if defined(RT_USING_UART4)
/* UART4 device driver structure */
struct stm32_uart uart4 =
{
    {UART4},
    UART4_IRQn,
};
struct rt_serial_device serial4;

void UART4_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial4);

    /* leave interrupt */
    rt_interrupt_leave();
}
#endif /* RT_USING_UART4 */

#if defined(RT_USING_UART5)
/* UART5 device driver structure */
struct stm32_uart uart5 =
{
    {UART5},
    UART5_IRQn,
};
struct rt_serial_device serial5;

void UART5_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial5);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_UART5 */

#if defined(RT_USING_LPUART1)
/* UART5 device driver structure */
struct stm32_uart lpuart1 =
{
    {LPUART1},
    LPUART1_IRQn,
};
struct rt_serial_device serial6;

void LPUART1_IRQHandler(void)
{
    /* enter interrupt */
    rt_interrupt_enter();

    uart_isr(&serial6);

    /* leave interrupt */
    rt_interrupt_leave();
}

#endif /* RT_USING_LPUART1 */

int stm32_hw_usart_init(void)
{
    struct stm32_uart *uart;
    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;

#ifdef RT_USING_UART1
    uart = &uart1;
    uart->UartHandle.Instance = USART1;

    serial1.ops    = &stm32_uart_ops;
    serial1.config = config;

    /* register UART1 device */
    rt_hw_serial_register(&serial1,
                          "uart1",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART1 */

#ifdef RT_USING_UART2
    uart = &uart2;
    uart->UartHandle.Instance = USART2;

    serial2.ops    = &stm32_uart_ops;
    serial2.config = config;

    /* register UART1 device */
    rt_hw_serial_register(&serial2,
                          "uart2",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART2 */

#ifdef RT_USING_UART3
    uart = &uart3;
    uart->UartHandle.Instance = USART3;

    serial3.ops    = &stm32_uart_ops;
    serial3.config = config;

    /* register UART3 device */
    rt_hw_serial_register(&serial3,
                          "uart3",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART3 */

#ifdef RT_USING_UART4
    uart = &uart4;
    uart->UartHandle.Instance = USART4;

    serial4.ops    = &stm32_uart_ops;
    serial4.config = config;

    /* register UART4 device */
    rt_hw_serial_register(&serial4,
                          "uart4",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART4 */

#ifdef RT_USING_UART5
    uart = &uart5;
    uart->UartHandle.Instance = USART5;

    serial5.ops    = &stm32_uart_ops;
    serial5.config = config;

    /* register UART5 device */
    rt_hw_serial_register(&serial5,
                          "uart5",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_UART5 */

#ifdef RT_USING_LPUART1
    uart = &lpuart1;
    uart->UartHandle.Instance = LPUART1;

    
    serial6.ops    = &stm32_uart_ops;
    serial6.config = config;
    
    serial6.config.baud_rate = BAUD_RATE_4800;

    /* register UART5 device */
    rt_hw_serial_register(&serial6,
                          "lpuart1",
                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                          uart);
#endif /* RT_USING_LPUART1 */
    return 0;
}
INIT_BOARD_EXPORT(stm32_hw_usart_init);