libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/nuvoton/libraries/nuc980/Driver/Source/nu_uart.c

777 lines
26 KiB
C
Raw Normal View History

Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
/**************************************************************************//**
* @file uart.c
* @version V3.00
* @brief NUC980 series UART driver source file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2016 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "nu_uart.h"
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup UART_Driver UART Driver
@{
*/
/** @addtogroup UART_EXPORTED_FUNCTIONS UART Exported Functions
@{
*/
/**
* @brief Clear UART specified interrupt flag
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module.
* - \ref UART_INTSTS_LININT_Msk : LIN bus interrupt
* - \ref UART_INTEN_WKIEN_Msk : Wake-up interrupt
* - \ref UART_INTSTS_BUFERRINT_Msk : Buffer Error interrupt
* - \ref UART_INTSTS_MODEMINT_Msk : Modem Status interrupt
* - \ref UART_INTSTS_RLSINT_Msk : Receive Line Status interrupt
*
* @return None
*
* @details The function is used to clear UART specified interrupt flag.
*/
void UART_ClearIntFlag(UART_T *uart, uint32_t u32InterruptFlag)
{
if (u32InterruptFlag & UART_INTSTS_RLSINT_Msk) /* Clear Receive Line Status Interrupt */
{
uart->FIFOSTS = UART_FIFOSTS_BIF_Msk | UART_FIFOSTS_FEF_Msk | UART_FIFOSTS_PEF_Msk;
uart->FIFOSTS = UART_FIFOSTS_ADDRDETF_Msk;
}
if (u32InterruptFlag & UART_INTSTS_MODEMINT_Msk) /* Clear Modem Status Interrupt */
{
uart->MODEMSTS |= UART_MODEMSTS_CTSDETF_Msk;
}
else
{
}
if (u32InterruptFlag & UART_INTSTS_BUFERRINT_Msk) /* Clear Buffer Error Interrupt */
{
uart->FIFOSTS = UART_FIFOSTS_RXOVIF_Msk | UART_FIFOSTS_TXOVIF_Msk;
}
if (u32InterruptFlag & UART_INTSTS_WKINT_Msk) /* Clear Wake-up Interrupt */
{
uart->WKSTS = UART_WKSTS_CTSWKF_Msk | UART_WKSTS_DATWKF_Msk |
UART_WKSTS_RFRTWKF_Msk | UART_WKSTS_RS485WKF_Msk |
UART_WKSTS_TOUTWKF_Msk;
}
if (u32InterruptFlag & UART_INTSTS_LININT_Msk) /* Clear LIN Bus Interrupt */
{
uart->INTSTS = UART_INTSTS_LINIF_Msk;
uart->LINSTS = UART_LINSTS_BITEF_Msk | UART_LINSTS_BRKDETF_Msk |
UART_LINSTS_SLVSYNCF_Msk | UART_LINSTS_SLVIDPEF_Msk |
UART_LINSTS_SLVHEF_Msk | UART_LINSTS_SLVHDETF_Msk ;
}
}
/**
* @brief Disable UART interrupt
*
* @param[in] uart The pointer of the specified UART module.
*
* @return None
*
* @details The function is used to disable UART interrupt.
*/
void UART_Close(UART_T *uart)
{
uart->INTEN = 0ul;
}
/**
* @brief Disable UART auto flow control function
*
* @param[in] uart The pointer of the specified UART module.
*
* @return None
*
* @details The function is used to disable UART auto flow control.
*/
void UART_DisableFlowCtrl(UART_T *uart)
{
uart->INTEN &= ~(UART_INTEN_ATORTSEN_Msk | UART_INTEN_ATOCTSEN_Msk);
}
/**
* @brief Disable UART specified interrupt
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module.
* - \ref UART_INTEN_WKIEN_Msk : Wake-up interrupt
* - \ref UART_INTEN_LINIEN_Msk : Lin bus interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem status interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Receive Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt *
*
* @return None
*
* @details The function is used to disable UART specified interrupt and disable NVIC UART IRQ.
*/
void UART_DisableInt(UART_T *uart, uint32_t u32InterruptFlag)
{
/* Disable UART specified interrupt */
UART_DISABLE_INT(uart, u32InterruptFlag);
}
/**
* @brief Enable UART auto flow control function
*
* @param[in] uart The pointer of the specified UART module.
*
* @return None
*
* @details The function is used to Enable UART auto flow control.
*/
void UART_EnableFlowCtrl(UART_T *uart)
{
/* Set RTS pin output is low level active */
uart->MODEM |= UART_MODEM_RTSACTLV_Msk;
/* Set CTS pin input is low level active */
uart->MODEMSTS |= UART_MODEMSTS_CTSACTLV_Msk;
/* Set RTS and CTS auto flow control enable */
uart->INTEN |= UART_INTEN_ATORTSEN_Msk | UART_INTEN_ATOCTSEN_Msk;
}
/**
* @brief The function is used to enable UART specified interrupt and enable NVIC UART IRQ.
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32InterruptFlag The specified interrupt of UART module:
* - \ref UART_INTEN_WKIEN_Msk : Wake-up interrupt
* - \ref UART_INTEN_LINIEN_Msk : Lin bus interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem status interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Receive Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt *
*
* @return None
*
* @details The function is used to enable UART specified interrupt and enable NVIC UART IRQ.
*/
void UART_EnableInt(UART_T *uart, uint32_t u32InterruptFlag)
{
/* Enable UART specified interrupt */
UART_ENABLE_INT(uart, u32InterruptFlag);
}
/**
* @brief Open and set UART function
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32baudrate The baudrate of UART module.
*
* @return None
*
* @details This function use to enable UART function and set baud-rate.
*/
void UART_Open(UART_T *uart, uint32_t u32baudrate)
{
uint32_t u32UartClkSrcSel = 0ul, u32UartClkDivNum = 0ul;
//uint32_t u32ClkTbl[4] = {XIN, LXT, ACLK, UCLK};
uint32_t u32ClkTbl[4] = {12000000, 32768, 75000000, 150000000};
uint32_t u32Baud_Div = 0ul;
if ((uint32_t)uart == UART0_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART1_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART2_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART3_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART4_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART5_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART6_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART7_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART8_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART9_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 13)) >> 13;
}
/* Select UART function */
uart->FUNCSEL = UART_FUNCSEL_UART;
/* Set UART line configuration */
uart->LINE = UART_WORD_LEN_8 | UART_PARITY_NONE | UART_STOP_BIT_1;
/* Set UART Rx and RTS trigger level */
uart->FIFO &= ~(UART_FIFO_RFITL_Msk | UART_FIFO_RTSTRGLV_Msk);
/* Get PLL clock frequency if UART clock source selection is PLL */
if (u32UartClkSrcSel == 2ul) // ACLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
if (u32UartClkSrcSel == 3ul) // PCLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
/* Set UART baud rate */
if (u32baudrate != 0ul)
{
u32Baud_Div = UART_BAUD_MODE2_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), u32baudrate);
if (u32Baud_Div > 0xFFFFul)
{
uart->BAUD = (UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), u32baudrate));
}
else
{
uart->BAUD = (UART_BAUD_MODE2 | u32Baud_Div);
}
}
}
/**
* @brief Read UART data
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] pu8RxBuf The buffer to receive the data of receive FIFO.
* @param[in] u32ReadBytes The the read bytes number of data.
*
* @return u32Count Receive byte count
*
* @details The function is used to read Rx data from RX FIFO and the data will be stored in pu8RxBuf.
*/
uint32_t UART_Read(UART_T *uart, uint8_t pu8RxBuf[], uint32_t u32ReadBytes)
{
uint32_t u32Count, u32delayno;
uint32_t u32Exit = 0ul;
for (u32Count = 0ul; u32Count < u32ReadBytes; u32Count++)
{
u32delayno = 0ul;
while (uart->FIFOSTS & UART_FIFOSTS_RXEMPTY_Msk) /* Check RX empty => failed */
{
u32delayno++;
if (u32delayno >= 0x40000000ul)
{
u32Exit = 1ul;
break;
}
else
{
}
}
if (u32Exit == 1ul)
{
break;
}
else
{
pu8RxBuf[u32Count] = (uint8_t)uart->DAT; /* Get Data from UART RX */
}
}
return u32Count;
}
/**
* @brief Set UART line configuration
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32baudrate The register value of baudrate of UART module.
* If u32baudrate = 0, UART baudrate will not change.
* @param[in] u32data_width The data length of UART module.
* - \ref UART_WORD_LEN_5
* - \ref UART_WORD_LEN_6
* - \ref UART_WORD_LEN_7
* - \ref UART_WORD_LEN_8
* @param[in] u32parity The parity setting (none/odd/even/mark/space) of UART module.
* - \ref UART_PARITY_NONE
* - \ref UART_PARITY_ODD
* - \ref UART_PARITY_EVEN
* - \ref UART_PARITY_MARK
* - \ref UART_PARITY_SPACE
* @param[in] u32stop_bits The stop bit length (1/1.5/2 bit) of UART module.
* - \ref UART_STOP_BIT_1
* - \ref UART_STOP_BIT_1_5
* - \ref UART_STOP_BIT_2
*
* @return None
*
* @details This function use to config UART line setting.
*/
void UART_SetLineConfig(UART_T *uart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits)
{
uint32_t u32UartClkSrcSel = 0ul, u32UartClkDivNum = 0ul;
//uint32_t u32ClkTbl[4] = {XIN, LXT, ACLK, UCLK};
uint32_t u32ClkTbl[4] = {12000000, 32768, 75000000, 150000000};
uint32_t u32Baud_Div = 0ul;
if ((uint32_t)uart == UART0_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART1_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART2_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART3_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART4_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART5_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART6_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART7_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART8_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART9_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 13)) >> 13;
}
/* Get PLL clock frequency if UART clock source selection is PLL */
if (u32UartClkSrcSel == 2ul) // ACLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
if (u32UartClkSrcSel == 3ul) // PCLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
/* Set UART baud rate */
if (u32baudrate != 0ul)
{
u32Baud_Div = UART_BAUD_MODE2_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), u32baudrate);
if (u32Baud_Div > 0xFFFFul)
{
uart->BAUD = (UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), u32baudrate));
}
else
{
uart->BAUD = (UART_BAUD_MODE2 | u32Baud_Div);
}
}
/* Set UART line configuration */
uart->LINE = u32data_width | u32parity | u32stop_bits;
}
/**
* @brief Set Rx timeout count
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32TOC Rx timeout counter.
*
* @return None
*
* @details This function use to set Rx timeout count.
*/
void UART_SetTimeoutCnt(UART_T *uart, uint32_t u32TOC)
{
/* Set time-out interrupt comparator */
uart->TOUT = (uart->TOUT & ~UART_TOUT_TOIC_Msk) | (u32TOC);
/* Set time-out counter enable */
uart->INTEN |= UART_INTEN_TOCNTEN_Msk;
}
/**
* @brief Select and configure IrDA function
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32Buadrate The baudrate of UART module.
* @param[in] u32Direction The direction of UART module in IrDA mode:
* - \ref UART_IRDA_TXEN
* - \ref UART_IRDA_RXEN
*
* @return None
*
* @details The function is used to configure IrDA relative settings. It consists of TX or RX mode and baudrate.
*/
void UART_SelectIrDAMode(UART_T *uart, uint32_t u32Buadrate, uint32_t u32Direction)
{
uint32_t u32UartClkSrcSel = 0ul, u32UartClkDivNum = 0ul;
//uint32_t u32ClkTbl[4] = {XIN, LXT, ACLK, UCLK};
uint32_t u32ClkTbl[4] = {12000000, 32768, 75000000, 150000000};
uint32_t u32Baud_Div = 0ul;
if ((uint32_t)uart == UART0_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART1_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART2_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART3_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL4) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL4) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART4_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART5_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 13)) >> 13;
}
else if ((uint32_t)uart == UART6_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 19)) >> 19;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 21)) >> 21;
}
else if ((uint32_t)uart == UART7_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL5) & (0x3ul << 27)) >> 27;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL5) & (0x7ul << 29)) >> 29;
}
else if ((uint32_t)uart == UART8_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 3)) >> 3;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 5)) >> 5;
}
else if ((uint32_t)uart == UART9_BA)
{
/* Get UART clock source selection */
u32UartClkSrcSel = (inp32(REG_CLK_DIVCTL6) & (0x3ul << 11)) >> 11;
/* Get UART clock divider number */
u32UartClkDivNum = (inp32(REG_CLK_DIVCTL6) & (0x7ul << 13)) >> 13;
}
/* Get PLL clock frequency if UART clock source selection is PLL */
if (u32UartClkSrcSel == 2ul) // ACLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
if (u32UartClkSrcSel == 3ul) // PCLK
{
//u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
}
/* Set UART IrDA baud rate in mode 0 */
if (u32Buadrate != 0ul)
{
u32Baud_Div = UART_BAUD_MODE0_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), u32Buadrate);
if (u32Baud_Div < 0xFFFFul)
{
uart->BAUD = (UART_BAUD_MODE0 | u32Baud_Div);
}
else
{
}
}
/* Configure IrDA relative settings */
if (u32Direction == UART_IRDA_RXEN)
{
uart->IRDA |= UART_IRDA_RXINV_Msk; /*Rx signal is inverse*/
uart->IRDA &= ~UART_IRDA_TXEN_Msk;
}
else
{
uart->IRDA &= ~UART_IRDA_TXINV_Msk; /*Tx signal is not inverse*/
uart->IRDA |= UART_IRDA_TXEN_Msk;
}
}
/**
* @brief Select and configure RS485 function
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32Mode The operation mode(NMM/AUD/AAD).
* - \ref UART_ALTCTL_RS485NMM_Msk
* - \ref UART_ALTCTL_RS485AUD_Msk
* - \ref UART_ALTCTL_RS485AAD_Msk
* @param[in] u32Addr The RS485 address.
*
* @return None
*
* @details The function is used to set RS485 relative setting.
*/
void UART_SelectRS485Mode(UART_T *uart, uint32_t u32Mode, uint32_t u32Addr)
{
/* Select UART RS485 function mode */
uart->FUNCSEL = UART_FUNCSEL_RS485;
/* Set RS585 configuration */
uart->ALTCTL &= ~(UART_ALTCTL_RS485NMM_Msk | UART_ALTCTL_RS485AUD_Msk | UART_ALTCTL_RS485AAD_Msk | UART_ALTCTL_ADDRMV_Msk);
uart->ALTCTL |= (u32Mode | (u32Addr << UART_ALTCTL_ADDRMV_Pos));
}
/**
* @brief Select and configure LIN function
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] u32Mode The LIN direction :
* - \ref UART_ALTCTL_LINTXEN_Msk
* - \ref UART_ALTCTL_LINRXEN_Msk
* @param[in] u32BreakLength The break field length.
*
* @return None
*
* @details The function is used to set LIN relative setting.
*/
void UART_SelectLINMode(UART_T *uart, uint32_t u32Mode, uint32_t u32BreakLength)
{
/* Select LIN function mode */
uart->FUNCSEL = UART_FUNCSEL_LIN;
/* Select LIN function setting : Tx enable, Rx enable and break field length */
uart->ALTCTL &= ~(UART_ALTCTL_LINTXEN_Msk | UART_ALTCTL_LINRXEN_Msk | UART_ALTCTL_BRKFL_Msk);
uart->ALTCTL |= (u32Mode | (u32BreakLength << UART_ALTCTL_BRKFL_Pos));
}
/**
* @brief Write UART data
*
* @param[in] uart The pointer of the specified UART module.
* @param[in] pu8TxBuf The buffer to send the data to UART transmission FIFO.
* @param[out] u32WriteBytes The byte number of data.
*
* @return u32Count transfer byte count
*
* @details The function is to write data into TX buffer to transmit data by UART.
*/
uint32_t UART_Write(UART_T *uart, uint8_t pu8TxBuf[], uint32_t u32WriteBytes)
{
uint32_t u32Count, u32delayno;
uint32_t u32Exit = 0ul;
for (u32Count = 0ul; u32Count != u32WriteBytes; u32Count++)
{
u32delayno = 0ul;
while ((uart->FIFOSTS & UART_FIFOSTS_TXEMPTYF_Msk) == 0ul) /* Wait Tx empty and Time-out manner */
{
u32delayno++;
if (u32delayno >= 0x40000000ul)
{
u32Exit = 1ul;
break;
}
else
{
}
}
if (u32Exit == 1ul)
{
break;
}
else
{
uart->DAT = pu8TxBuf[u32Count]; /* Send UART Data from buffer */
}
}
return u32Count;
}
/**
* @brief Set RTS pin to low
*
* @param[in] uart The pointer of the specified UART module
*
* @return None
*
* @details This macro set RTS pin to low.
*/
void UART_CLEAR_RTS(UART_T *uart)
{
uart->MODEM |= UART_MODEM_RTSACTLV_Msk;
uart->MODEM &= ~UART_MODEM_RTS_Msk;
}
/**
* @brief Set RTS pin to high
*
* @param[in] uart The pointer of the specified UART module
*
* @return None
*
* @details This macro set RTS pin to high.
*/
void UART_SET_RTS(UART_T *uart)
{
uart->MODEM |= UART_MODEM_RTSACTLV_Msk | UART_MODEM_RTS_Msk;
}
/*@}*/ /* end of group UART_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group UART_Driver */
/*@}*/ /* end of group Standard_Driver */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/