rt-thread-official/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h

/*
 * Copyright (c) 2006-2022, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2021-12-10     Meco Man     first version
 * 2022-09-18     Meco Man     sort pinout out
 */

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <rtconfig.h>

/* pins alias. Must keep in sequence */
#define D0        (0)
#define D1        (1)
#define D2        (2)
#define D3        (3)
#define D4        (4)
#define D5        (5)
#define D6        (6)
#define D7        (7)
#define D8        (8)
#define D9        (9)
#define D10       (10)
#define D11       (11)
#define D12       (12)
#define D13       (13)
#define D14       (14)
#define D15       (15)
#define D16       (16)
#define D17       (17)
#define D18       (18)
#define D19       (19)
#define D20       (20)
#define D21       (21)
#define D22       (22)
#define D23       (23)
#define D24       (24)
#define D25       (25)
#define D26       (26)
#define D27       (27)
#define D28       (28)
#define D29       (29)
#define D30       (30)
#define D31       (31)
#define D32       (32)
#define D33       (33)
#define D34       (34)
#define D35       (35)
#define D36       (36)
#define D37       (37)
#define D38       (38)
#define D39       (39)
#define A0        (40)
#define A1        (41)
#define A2        (42)
#define A3        (43)
#define DAC0      (44)

#define RTDUINO_PIN_MAX_LIMIT DAC0 /* pin number max limit check */

#define F_CPU          80000000L  /* CPU:80MHz */

#define LED_BUILTIN     D22  /* Default Built-in LED */

/* Serial2 - PA2-TX  PA3-RX */
#define RTDUINO_SERIAL2_DEVICE_NAME     "uart2"

#define RTDUINO_TONE_HWTIMER_DEVICE_NAME "timer7"

/* I2C */
#if defined(BSP_USING_ARDUINO_AHT10)
#define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c4" /* i2c4 - AHT10 (On Board) */
#elif defined(BSP_USING_ARDUINO_AP3216) || defined(BSP_USING_ARDUINO_ICM20608)
#define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c3" /* i2c3 - ICM20608, AP3216C (On Board) */
#else
#define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c1" /* i2c1 - PC7-SDA PC6-SCL (User I2C) */
#endif /* BSP_USING_ARDUINO_AHT10 */

/* SPI */
#if defined(BSP_USING_ARDUINO_ST7789)
/*
 * SPI LCD ST7789 (spi3)
 * LCD-SPI-SDA  PB5
 * LCD-SPI-SCK  PB3
 * LCD-SPI-CS   PD7
 * LCD-POWER    PB7
 * LCD-RESET    PB6
 * LCD-WR/DC    PB4
 */
#define SS      D36  /* LCD-SPI-CS PD7 */
#define RTDUINO_DEFAULT_SPI_BUS_NAME      "spi3" /* LCD SPI Bus */
#else
/* spi2 - PB13-SCK  PB14-MISO  PB15-MOSI */
#define SS      D28  /* Chip select pin of default spi */
#define RTDUINO_DEFAULT_SPI_BUS_NAME      "spi2"
#endif /* BSP_USING_ARDUINO_ST7789 */

#endif /* Pins_Arduino_h */
[stm32l475][arduino] 初步实现Arduino生态兼容 (#5367) * [arduino] 初步实现Arduino生态兼容组件 * [stm32f475] 增加PC2 作为ADC1_IN3 * [stm32l475][port] 将路径Arduino改为arduino 2021-12-13 11:36:51 +08:00			`/*`
[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) (#5690) 2022-03-20 15:46:33 +08:00			`* Copyright (c) 2006-2022, RT-Thread Development Team`
[stm32l475][arduino] 初步实现Arduino生态兼容 (#5367) * [arduino] 初步实现Arduino生态兼容组件 * [stm32f475] 增加PC2 作为ADC1_IN3 * [stm32l475][port] 将路径Arduino改为arduino 2021-12-13 11:36:51 +08:00			`*`
			`* SPDX-License-Identifier: Apache-2.0`
			`*`
			`* Change Logs:`
			`* Date Author Notes`
			`* 2021-12-10 Meco Man first version`
[rtduino]重新整理pinout (#6445) * [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout 2022-09-19 10:14:35 +08:00			`* 2022-09-18 Meco Man sort pinout out`
[stm32l475][arduino] 初步实现Arduino生态兼容 (#5367) * [arduino] 初步实现Arduino生态兼容组件 * [stm32f475] 增加PC2 作为ADC1_IN3 * [stm32l475][port] 将路径Arduino改为arduino 2021-12-13 11:36:51 +08:00			`*/`
update arduino related (#5809) - add comments - remove ARDUINO_PWM_HZ - remove initVariant blank function - support DAC0 - improve Kconfig of STM32L475 PANDORA - add readme - add i2c1 bus device 2022-04-16 15:10:00 +08:00
[arduino][stm32l475] update application/arduino folder (#5599) 2022-02-17 13:36:15 +08:00			`#ifndef Pins_Arduino_h`
			`#define Pins_Arduino_h`
[stm32l475][arduino] 初步实现Arduino生态兼容 (#5367) * [arduino] 初步实现Arduino生态兼容组件 * [stm32f475] 增加PC2 作为ADC1_IN3 * [stm32l475][port] 将路径Arduino改为arduino 2021-12-13 11:36:51 +08:00
[stm32][rtduino] add drv_gpio.h for pins_arduino.c 2023-12-23 13:33:28 +08:00			`#include <rtconfig.h>`

[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) (#5690) 2022-03-20 15:46:33 +08:00			`/* pins alias. Must keep in sequence */`
[rtduino]重新整理pinout (#6445) * [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout 2022-09-19 10:14:35 +08:00			`#define D0 (0)`
			`#define D1 (1)`
			`#define D2 (2)`
			`#define D3 (3)`
			`#define D4 (4)`
			`#define D5 (5)`
			`#define D6 (6)`
			`#define D7 (7)`
			`#define D8 (8)`
			`#define D9 (9)`
			`#define D10 (10)`
			`#define D11 (11)`
			`#define D12 (12)`
			`#define D13 (13)`
			`#define D14 (14)`
			`#define D15 (15)`
			`#define D16 (16)`
			`#define D17 (17)`
			`#define D18 (18)`
			`#define D19 (19)`
			`#define D20 (20)`
			`#define D21 (21)`
			`#define D22 (22)`
			`#define D23 (23)`
			`#define D24 (24)`
			`#define D25 (25)`
			`#define D26 (26)`
			`#define D27 (27)`
			`#define D28 (28)`
			`#define D29 (29)`
			`#define D30 (30)`
			`#define D31 (31)`
			`#define D32 (32)`
			`#define D33 (33)`
			`#define D34 (34)`
			`#define D35 (35)`
[rtduino][stm32] support SPI LCD 2023-05-21 14:06:19 +08:00			`#define D36 (36)`
			`#define D37 (37)`
			`#define D38 (38)`
			`#define D39 (39)`
			`#define A0 (40)`
			`#define A1 (41)`
			`#define A2 (42)`
			`#define A3 (43)`
			`#define DAC0 (44)`
[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) (#5690) 2022-03-20 15:46:33 +08:00
[stm32][RTduino] limit pin max number check 2023-07-07 07:21:45 +08:00			`#define RTDUINO_PIN_MAX_LIMIT DAC0 /* pin number max limit check */`

[rtduino]重新整理pinout (#6445) * [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout 2022-09-19 10:14:35 +08:00			`#define F_CPU 80000000L /* CPU:80MHz */`

[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-26 10:38:35 +08:00			`#define LED_BUILTIN D22 /* Default Built-in LED */`
[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) (#5690) 2022-03-20 15:46:33 +08:00
[RTduino][stm32][pandora] support Arduino libraries demos 2023-05-29 12:03:54 +08:00			`/* Serial2 - PA2-TX PA3-RX */`
			`#define RTDUINO_SERIAL2_DEVICE_NAME "uart2"`

[stm32l475][RTduino] support tone timer 2023-07-07 07:18:54 +08:00			`#define RTDUINO_TONE_HWTIMER_DEVICE_NAME "timer7"`

[RTduino][stm32][pandora] support Arduino libraries demos 2023-05-29 12:03:54 +08:00			`/* I2C */`
			`#if defined(BSP_USING_ARDUINO_AHT10)`
			`#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c4" /* i2c4 - AHT10 (On Board) */`
			`#elif defined(BSP_USING_ARDUINO_AP3216) \|\| defined(BSP_USING_ARDUINO_ICM20608)`
			`#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c3" /* i2c3 - ICM20608, AP3216C (On Board) */`
			`#else`
			`#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" /* i2c1 - PC7-SDA PC6-SCL (User I2C) */`
			`#endif /* BSP_USING_ARDUINO_AHT10 */`
[rtduino]重新整理pinout (#6445) * [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout 2022-09-19 10:14:35 +08:00
[RTduino][stm32][pandora] support Arduino libraries demos 2023-05-29 12:03:54 +08:00			`/* SPI */`
			`#if defined(BSP_USING_ARDUINO_ST7789)`
[rtduino][stm32] support SPI LCD 2023-05-21 14:06:19 +08:00			`/*`
			`* SPI LCD ST7789 (spi3)`
			`* LCD-SPI-SDA PB5`
			`* LCD-SPI-SCK PB3`
			`* LCD-SPI-CS PD7`
			`* LCD-POWER PB7`
			`* LCD-RESET PB6`
			`* LCD-WR/DC PB4`
			`*/`
			`#define SS D36 /* LCD-SPI-CS PD7 */`
			`#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi3" /* LCD SPI Bus */`
[RTduino][stm32][pandora] support Arduino libraries demos 2023-05-29 12:03:54 +08:00			`#else`
			`/* spi2 - PB13-SCK PB14-MISO PB15-MOSI */`
			`#define SS D28 /* Chip select pin of default spi */`
			`#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi2"`
			`#endif /* BSP_USING_ARDUINO_ST7789 */`
更新文档潘多拉增加spi2 2022-04-27 23:57:20 +08:00
[arduino][stm32l475] update application/arduino folder (#5599) 2022-02-17 13:36:15 +08:00			`#endif /* Pins_Arduino_h */`