rt-thread-official/bsp/gd32e230k-start/drivers/drv_usart.c

299 lines
7.6 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2019, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard the first version
* 2018-04-19 misonyo Porting for gd32f30x
2019-03-31 23:26:35 +08:00
* 2019-03-31 xuzhuoyi Porting for gd32e230
*/
#include <rthw.h>
#include <drv_usart.h>
#include <rtthread.h>
#include "gd32e230.h"
#ifdef RT_USING_SERIAL
#define UART_ENABLE_IRQ(n) NVIC_EnableIRQ((n))
#define UART_DISABLE_IRQ(n) NVIC_DisableIRQ((n))
2019-03-31 23:26:35 +08:00
#if !defined(RT_USING_USART0) && !defined(RT_USING_USART1)
#error "Please define at least one UARTx"
#endif
#include <rtdevice.h>
/* GD32 uart driver */
// Todo: compress uart info
struct gd32_uart
{
uint32_t uart_periph;
IRQn_Type irqn;
rcu_periph_enum per_clk;
rcu_periph_enum tx_gpio_clk;
rcu_periph_enum rx_gpio_clk;
uint32_t tx_port;
uint32_t tx_af;
uint16_t tx_pin;
uint32_t rx_port;
uint32_t rx_af;
uint16_t rx_pin;
struct rt_serial_device * serial;
char *device_name;
};
static void uart_isr(struct rt_serial_device *serial);
#if defined(RT_USING_USART0)
struct rt_serial_device serial0;
void USART0_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
uart_isr(&serial0);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_USART0 */
#if defined(RT_USING_USART1)
struct rt_serial_device serial1;
void USART1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
uart_isr(&serial1);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART1 */
static const struct gd32_uart uarts[] = {
#ifdef RT_USING_USART0
{
USART0, // uart peripheral index
USART0_IRQn, // uart iqrn
RCU_USART0, RCU_GPIOA, RCU_GPIOA, // periph clock, tx gpio clock, rt gpio clock
GPIOA, GPIO_AF_1, GPIO_PIN_9, // tx port, tx pin
GPIOA, GPIO_AF_1, GPIO_PIN_10, // rx port, rx pin
&serial0,
"uart0",
},
#endif
#ifdef RT_USING_USART1
{
USART1, // uart peripheral index
USART1_IRQn, // uart iqrn
RCU_USART1, RCU_GPIOA, RCU_GPIOA, // periph clock, tx gpio clock, rt gpio clock
GPIOA, GPIO_AF_1, GPIO_PIN_2, // tx port, tx pin
GPIOA, GPIO_AF_1, GPIO_PIN_3, // rx port, rx pin
&serial1,
"uart1",
},
#endif
};
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example:
* - Peripheral's clock enable
* - Peripheral's GPIO Configuration
* - NVIC configuration for UART interrupt request enable
* @param uart: UART handle pointer
* @retval None
*/
void gd32_uart_gpio_init(struct gd32_uart *uart)
{
/* enable USART clock */
rcu_periph_clock_enable(uart->tx_gpio_clk);
rcu_periph_clock_enable(uart->rx_gpio_clk);
rcu_periph_clock_enable(uart->per_clk);
/* connect port to USARTx_Tx */
gpio_af_set(uart->tx_port, uart->tx_af, uart->tx_pin);
gpio_mode_set(uart->tx_port, GPIO_MODE_AF, GPIO_PUPD_NONE, uart->tx_pin);
gpio_output_options_set(uart->tx_port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, uart->tx_pin);
/* connect port to USARTx_Rx */
gpio_af_set(uart->rx_port, uart->rx_af, uart->rx_pin);
gpio_mode_set(uart->rx_port, GPIO_MODE_AF, GPIO_PUPD_NONE, uart->rx_pin);
gpio_output_options_set(uart->rx_port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, uart->rx_pin);
NVIC_SetPriority(uart->irqn, 0);
NVIC_EnableIRQ(uart->irqn);
}
static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct gd32_uart *uart;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
gd32_uart_gpio_init(uart);
usart_baudrate_set(uart->uart_periph, cfg->baud_rate);
switch (cfg->data_bits)
{
case DATA_BITS_9:
usart_word_length_set(uart->uart_periph, USART_WL_9BIT);
break;
default:
usart_word_length_set(uart->uart_periph, USART_WL_8BIT);
break;
}
switch (cfg->stop_bits)
{
case STOP_BITS_2:
usart_stop_bit_set(uart->uart_periph, USART_STB_2BIT);
break;
default:
usart_stop_bit_set(uart->uart_periph, USART_STB_1BIT);
break;
}
switch (cfg->parity)
{
case PARITY_ODD:
usart_parity_config(uart->uart_periph, USART_PM_ODD);
break;
case PARITY_EVEN:
usart_parity_config(uart->uart_periph, USART_PM_EVEN);
break;
default:
usart_parity_config(uart->uart_periph, USART_PM_NONE);
break;
}
usart_receive_config(uart->uart_periph, USART_RECEIVE_ENABLE);
usart_transmit_config(uart->uart_periph, USART_TRANSMIT_ENABLE);
usart_enable(uart->uart_periph);
return RT_EOK;
}
static rt_err_t gd32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct gd32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
NVIC_DisableIRQ(uart->irqn);
/* disable interrupt */
usart_interrupt_disable(uart->uart_periph, USART_INT_RBNE);
break;
case RT_DEVICE_CTRL_SET_INT:
/* enable rx irq */
NVIC_EnableIRQ(uart->irqn);
/* enable interrupt */
usart_interrupt_enable(uart->uart_periph, USART_INT_RBNE);
break;
}
return RT_EOK;
}
static int gd32_putc(struct rt_serial_device *serial, char ch)
{
struct gd32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
usart_data_transmit(uart->uart_periph, ch);
while((usart_flag_get(uart->uart_periph, USART_FLAG_TC) == RESET));
return 1;
}
static int gd32_getc(struct rt_serial_device *serial)
{
int ch;
struct gd32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct gd32_uart *)serial->parent.user_data;
ch = -1;
if (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET)
ch = usart_data_receive(uart->uart_periph);
return ch;
}
/**
* Uart common interrupt process. This need add to uart ISR.
*
* @param serial serial device
*/
static void uart_isr(struct rt_serial_device *serial)
{
struct gd32_uart *uart = (struct gd32_uart *) serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
/* UART in mode Receiver */
if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_RBNE) != RESET) &&
(usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET))
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
/* Clear RXNE interrupt flag */
usart_flag_clear(uart->uart_periph, USART_FLAG_RBNE);
}
}
static const struct rt_uart_ops gd32_uart_ops =
{
gd32_configure,
gd32_control,
gd32_putc,
gd32_getc
};
int gd32_hw_usart_init(void)
{
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
int i;
for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++)
{
uarts[i].serial->ops = &gd32_uart_ops;
uarts[i].serial->config = config;
/* register UART device */
rt_hw_serial_register(uarts[i].serial,
uarts[i].device_name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
(void *)&uarts[i]);
}
return 0;
}
INIT_BOARD_EXPORT(gd32_hw_usart_init);
#endif