rt-thread-official/bsp/stm32f40x/drivers/SConscript

from building import *

cwd = GetCurrentDir()

# add the general drivers.
src = Split("""
board.c
stm32f4xx_it.c
usart.c
""")

# add Ethernet drivers.
if GetDepend('RT_USING_LWIP'):
    src += ['stm32f4xx_eth.c']

# add gpio drivers.
if GetDepend('RT_USING_PIN'):
    src += ['gpio.c']

CPPPATH = [cwd]

group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)

Return('group')
Re-normalizing the repo 2013-01-08 22:40:58 +08:00			`from building import *`

[BSP] Add Kconfig for lpc408x/stm32f10x/stm32f20x/stm32f40x etc 2018-03-04 22:35:07 +08:00			`cwd = GetCurrentDir()`
[bugfix] Open the #define RT_USING_LWIP in rtconfig.h , then build it , the stm32_eth.h can not find. Signed-off-by: pangwei <271372443@qq.com> 2015-05-08 11:34:17 +08:00
			`# add the general drivers.`
			`src = Split("""`
			`board.c`
			`stm32f4xx_it.c`
			`usart.c`
			`""")`

			`# add Ethernet drivers.`
			`if GetDepend('RT_USING_LWIP'):`
			`src += ['stm32f4xx_eth.c']`

			`# add gpio drivers.`
			`if GetDepend('RT_USING_PIN'):`
			`src += ['gpio.c']`

Re-normalizing the repo 2013-01-08 22:40:58 +08:00			`CPPPATH = [cwd]`

			`group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)`

			`Return('group')`