rt-thread-official/bsp/tae32f5300/board/tae32f53xx_ll_conf.h

306 lines
8.2 KiB
C
Raw Normal View History

/**
******************************************************************************
* @file tae32f53xx_ll_conf.h
* @author MCD Application Team
* @brief LL configuration file.
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 Tai-Action.
* All rights reserved.</center></h2>
*
* This software is licensed by Tai-Action under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef _TAE32F53XX_LL_CONF_H_
#define _TAE32F53XX_LL_CONF_H_
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup TAE32F53xx_Examples
* @{
*/
/** @addtogroup TAE32F53xx_Template
* @{
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CONFIG_LL_Exported_Constants CONFIG LL Exported Constants
* @brief CONFIG LL Exported Constants
* @{
*/
/** @defgroup CONFIG_LL_Module_Selection CONFIG LL Module Selection
* @brief CONFIG LL Module Selection
* @note This is the list of modules to be used in the LL driver
* @{
*/
/* Internal Class Peripheral */
#define LL_MODULE_ENABLED /*!< LL Module Enable */
#define LL_CORTEX_MODULE_ENABLED /*!< Cortex Module Enable */
#define LL_FPLL_MODULE_ENABLED /*!< FPLL Module Enable */
#define LL_LVD_MODULE_ENABLED /*!< LVD Module Enable */
#define LL_DMA_MODULE_ENABLED /*!< DMA Module Enable */
#define LL_FLASH_MODULE_ENABLED /*!< FLASH Module Enable */
#define LL_DFLASH_MODULE_ENABLED /*!< DFLASH Module Enable */
#define LL_WWDG_MODULE_ENABLED /*!< WWDG Module Enable */
#define LL_IWDG_MODULE_ENABLED /*!< IWDG Module Enable */
#define LL_TMR_MODULE_ENABLED /*!< TMR Module Enable */
#define LL_IIR_MODULE_ENABLED /*!< IIR Module Enable */
/* Interface Class Peripheral */
#define LL_GPIO_MODULE_ENABLED /*!< GPIO Module Enable */
#define LL_UART_MODULE_ENABLED /*!< UART Module Enable */
#define LL_I2C_MODULE_ENABLED /*!< I2C Module Enable */
#define LL_CAN_MODULE_ENABLED /*!< CAN Module Enable */
#define LL_DALI_MODULE_ENABLED /*!< DALI Module Enable */
#define LL_USB_MODULE_ENABLED /*!< USB Module Enable */
/* Analog Class Peripheral */
#define LL_ADC_MODULE_ENABLED /*!< ADC Module Enable */
#define LL_DAC_MODULE_ENABLED /*!< DAC Module Enable */
#define LL_CMP_MODULE_ENABLED /*!< CMP Module Enable */
#define LL_ECU_MODULE_ENABLED /*!< ECU Module Enable */
#define LL_HRPWM_MODULE_ENABLED /*!< HRPWM Module Enable */
/**
* @}
*/
/** @defgroup CONFIG_LL_Oscillator_Values_Adaptation CONFIG LL Oscillator Values Adaptation
* @brief CONFIG LL Oscillator Values Adaptation
* @{
*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the FPLL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the FPLL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
#endif
/**
* @brief Internal Low Speed oscillator (LSI) value.
* Defines the value of the Internal Low Speed oscillator in Hz.
* @note The real value may vary depending on the variations in voltage and temperature.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
#endif
/**
* @}
*/
/** @defgroup CONFIG_LL_System_Configuration CONFIG LL System Configuration
* @brief CONFIG LL System Configuration
* @note This is the LL system configuration section
* @{
*/
#define TICK_INT_PRIORITY 0x07U /*!< tick interrupt priority, set to lowest */
#define USE_RTOS 0U /*!< Support for RTOS (Unsupported in current version) */
#define PREFETCH_ENABLE 1U /*!< Flash prefetch feature */
/**
* @}
*/
/**
* @}
*/
/* Includes ------------------------------------------------------------------*/
#include "stdbool.h"
#include "tae32f53xx_ll_sysctrl.h"
/* Internal Class Peripheral */
#ifdef LL_CORTEX_MODULE_ENABLED
#include "tae32f53xx_ll_cortex.h"
#endif
#ifdef LL_FPLL_MODULE_ENABLED
#include "tae32f53xx_ll_fpll.h"
#endif
#ifdef LL_LVD_MODULE_ENABLED
#include "tae32f53xx_ll_lvdctrl.h"
#endif
#ifdef LL_DMA_MODULE_ENABLED
#include "tae32f53xx_ll_dma.h"
#endif
#ifdef LL_FLASH_MODULE_ENABLED
#include "tae32f53xx_ll_flash.h"
#endif
#ifdef LL_DFLASH_MODULE_ENABLED
#include "tae32f53xx_ll_dflash.h"
#endif
#ifdef LL_WWDG_MODULE_ENABLED
#include "tae32f53xx_ll_wwdg.h"
#endif
#ifdef LL_IWDG_MODULE_ENABLED
#include "tae32f53xx_ll_iwdg.h"
#endif
#ifdef LL_TMR_MODULE_ENABLED
#include "tae32f53xx_ll_tmr.h"
#endif
#ifdef LL_IIR_MODULE_ENABLED
#include "tae32f53xx_ll_iir.h"
#endif
/* Interface Class Peripheral */
#ifdef LL_GPIO_MODULE_ENABLED
#include "tae32f53xx_ll_gpio.h"
#endif
#ifdef LL_UART_MODULE_ENABLED
#include "tae32f53xx_ll_uart.h"
#endif
#ifdef LL_I2C_MODULE_ENABLED
#include "tae32f53xx_ll_i2c.h"
#endif
#ifdef LL_CAN_MODULE_ENABLED
#include "tae32f53xx_ll_can.h"
#endif
#ifdef LL_DALI_MODULE_ENABLED
#include "tae32f53xx_ll_dali.h"
#endif
#ifdef LL_USB_MODULE_ENABLED
#include "tae32f53xx_ll_usb.h"
#endif
/* Analog Class Peripheral */
#ifdef LL_ADC_MODULE_ENABLED
#include "tae32f53xx_ll_adc.h"
#endif
#ifdef LL_DAC_MODULE_ENABLED
#include "tae32f53xx_ll_dac.h"
#endif
#ifdef LL_CMP_MODULE_ENABLED
#include "tae32f53xx_ll_cmp.h"
#endif
#ifdef LL_ECU_MODULE_ENABLED
#include "tae32f53xx_ll_ecu.h"
#endif
#ifdef LL_HRPWM_MODULE_ENABLED
#include "tae32f53xx_ll_hrpwm.h"
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup CONFIG_LL_Exported_Macros CONFIG LL Exported Macros
* @brief CONFIG LL Exported Macros
* @{
*/
/** @defgroup CONFIG_LL_Assert_Selection CONFIG LL Assert Selection
* @brief CONFIG LL Assert Selection
* @{
*/
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the LL drivers code
*/
//#define USE_FULL_ASSERT
#ifdef USE_FULL_ASSERT
void assert_failed(uint8_t *file, uint32_t line);
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
/**
* @}
*/
/**
* @}
*/
/* Exported functions ------------------------------------------------------- */
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* _TAE32F53XX_LL_CONF_H_ */
/************************* (C) COPYRIGHT Tai-Action *****END OF FILE***********/