rt-thread-official/bsp/nuvoton_m487/libraries/StdDriver/inc/bpwm.h

361 lines
20 KiB
C
Raw Normal View History

2018-11-19 09:49:32 +08:00
/**************************************************************************//**
* @file bpwm.h
* @version V1.00
* @brief M480 series PWM driver header file
*
* @copyright (C) 2016 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __BPWM_H__
#define __BPWM_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup BPWM_Driver BPWM Driver
@{
*/
/** @addtogroup BPWM_EXPORTED_CONSTANTS BPWM Exported Constants
@{
*/
#define BPWM_CHANNEL_NUM (6) /*!< BPWM channel number \hideinitializer */
#define BPWM_CH_0_MASK (0x1UL) /*!< BPWM channel 0 mask \hideinitializer */
#define BPWM_CH_1_MASK (0x2UL) /*!< BPWM channel 1 mask \hideinitializer */
#define BPWM_CH_2_MASK (0x4UL) /*!< BPWM channel 2 mask \hideinitializer */
#define BPWM_CH_3_MASK (0x8UL) /*!< BPWM channel 3 mask \hideinitializer */
#define BPWM_CH_4_MASK (0x10UL) /*!< BPWM channel 4 mask \hideinitializer */
#define BPWM_CH_5_MASK (0x20UL) /*!< BPWM channel 5 mask \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Counter Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_UP_COUNTER (0UL) /*!< Up counter type \hideinitializer */
#define BPWM_DOWN_COUNTER (1UL) /*!< Down counter type \hideinitializer */
#define BPWM_UP_DOWN_COUNTER (2UL) /*!< Up-Down counter type \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Aligned Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_EDGE_ALIGNED (1UL) /*!< BPWM working in edge aligned type(down count) \hideinitializer */
#define BPWM_CENTER_ALIGNED (2UL) /*!< BPWM working in center aligned type \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Output Level Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_OUTPUT_NOTHING (0UL) /*!< BPWM output nothing \hideinitializer */
#define BPWM_OUTPUT_LOW (1UL) /*!< BPWM output low \hideinitializer */
#define BPWM_OUTPUT_HIGH (2UL) /*!< BPWM output high \hideinitializer */
#define BPWM_OUTPUT_TOGGLE (3UL) /*!< BPWM output toggle \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Synchronous Start Function Control Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_SSCTL_SSRC_PWM0 (0UL<<BPWM_SSCTL_SSRC_Pos) /*!< Synchronous start source comes from PWM0 */
#define BPWM_SSCTL_SSRC_PWM1 (1UL<<BPWM_SSCTL_SSRC_Pos) /*!< Synchronous start source comes from PWM1 */
#define BPWM_SSCTL_SSRC_BPWM0 (2UL<<BPWM_SSCTL_SSRC_Pos) /*!< Synchronous start source comes from BPWM0 */
#define BPWM_SSCTL_SSRC_BPWM1 (3UL<<BPWM_SSCTL_SSRC_Pos) /*!< Synchronous start source comes from BPWM1 */
/*---------------------------------------------------------------------------------------------------------*/
/* Trigger Source Select Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_TRIGGER_ADC_EVEN_ZERO_POINT (0UL) /*!< BPWM trigger ADC while counter of even channel matches zero point \hideinitializer */
#define BPWM_TRIGGER_ADC_EVEN_PERIOD_POINT (1UL) /*!< BPWM trigger ADC while counter of even channel matches period point \hideinitializer */
#define BPWM_TRIGGER_ADC_EVEN_ZERO_OR_PERIOD_POINT (2UL) /*!< BPWM trigger ADC while counter of even channel matches zero or period point \hideinitializer */
#define BPWM_TRIGGER_ADC_EVEN_CMP_UP_COUNT_POINT (3UL) /*!< BPWM trigger ADC while counter of even channel matches up count to comparator point \hideinitializer */
#define BPWM_TRIGGER_ADC_EVEN_CMP_DOWN_COUNT_POINT (4UL) /*!< BPWM trigger ADC while counter of even channel matches down count to comparator point \hideinitializer */
#define BPWM_TRIGGER_ADC_ODD_CMP_UP_COUNT_POINT (8UL) /*!< BPWM trigger ADC while counter of odd channel matches up count to comparator point \hideinitializer */
#define BPWM_TRIGGER_ADC_ODD_CMP_DOWN_COUNT_POINT (9UL) /*!< BPWM trigger ADC while counter of odd channel matches down count to comparator point \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Capture Control Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_CAPTURE_INT_RISING_LATCH (1UL) /*!< BPWM capture interrupt if channel has rising transition \hideinitializer */
#define BPWM_CAPTURE_INT_FALLING_LATCH (0x100UL) /*!< BPWM capture interrupt if channel has falling transition \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Duty Interrupt Type Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_DUTY_INT_DOWN_COUNT_MATCH_CMP (1 << BPWM_INTEN_CMPDIENn_Pos) /*!< BPWM duty interrupt triggered if down count match comparator \hideinitializer */
#define BPWM_DUTY_INT_UP_COUNT_MATCH_CMP (1 << BPWM_INTEN_CMPUIENn_Pos) /*!< BPWM duty interrupt triggered if up down match comparator \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Load Mode Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_LOAD_MODE_IMMEDIATE (1 << BPWM_CTL0_IMMLDENn_Pos) /*!< BPWM immediately load mode \hideinitializer */
#define BPWM_LOAD_MODE_CENTER (1 << BPWM_CTL0_CTRLDn_Pos) /*!< BPWM center load mode \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* Clock Source Select Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define BPWM_CLKSRC_BPWM_CLK (0UL) /*!< BPWM Clock source selects to BPWM0_CLK or BPWM1_CLK \hideinitializer */
#define BPWM_CLKSRC_TIMER0 (1UL) /*!< BPWM Clock source selects to TIMER0 overflow \hideinitializer */
#define BPWM_CLKSRC_TIMER1 (2UL) /*!< BPWM Clock source selects to TIMER1 overflow \hideinitializer */
#define BPWM_CLKSRC_TIMER2 (3UL) /*!< BPWM Clock source selects to TIMER2 overflow \hideinitializer */
#define BPWM_CLKSRC_TIMER3 (4UL) /*!< BPWM Clock source selects to TIMER3 overflow \hideinitializer */
/*@}*/ /* end of group BPWM_EXPORTED_CONSTANTS */
/** @addtogroup BPWM_EXPORTED_FUNCTIONS BPWM Exported Functions
@{
*/
/**
* @brief Enable timer synchronous start counting function of specified channel(s)
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. This parameter is not used.
* @param[in] u32SyncSrc Synchronous start source selection, valid values are:
* - \ref BPWM_SSCTL_SSRC_PWM0
* - \ref BPWM_SSCTL_SSRC_PWM1
* - \ref BPWM_SSCTL_SSRC_BPWM0
* - \ref BPWM_SSCTL_SSRC_BPWM1
* @return None
* @details This macro is used to enable timer synchronous start counting function of specified channel(s).
* @note All channels share channel 0's setting.
* \hideinitializer
*/
#define BPWM_ENABLE_TIMER_SYNC(bpwm, u32ChannelMask, u32SyncSrc) ((bpwm)->SSCTL = ((bpwm)->SSCTL & ~BPWM_SSCTL_SSRC_Msk) | (u32SyncSrc) | BPWM_SSCTL_SSEN0_Msk)
/**
* @brief Disable timer synchronous start counting function of specified channel(s)
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. This parameter is not used.
* @return None
* @details This macro is used to disable timer synchronous start counting function of specified channel(s).
* @note All channels share channel 0's setting.
* \hideinitializer
*/
#define BPWM_DISABLE_TIMER_SYNC(bpwm, u32ChannelMask) ((bpwm)->SSCTL &= ~BPWM_SSCTL_SSEN0_Msk)
/**
* @brief This macro enable BPWM counter synchronous start counting function.
* @param[in] bpwm The pointer of the specified BPWM module
* @return None
* @details This macro is used to make selected BPWM0 and BPWM1 channel(s) start counting at the same time.
* To configure synchronous start counting channel(s) by BPWM_ENABLE_TIMER_SYNC() and BPWM_DISABLE_TIMER_SYNC().
* \hideinitializer
*/
#define BPWM_TRIGGER_SYNC_START(bpwm) ((bpwm)->SSTRG = BPWM_SSTRG_CNTSEN_Msk)
/**
* @brief This macro enable output inverter of specified channel(s)
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
* Bit 0 represents channel 0, bit 1 represents channel 1...
* @return None
* \hideinitializer
*/
#define BPWM_ENABLE_OUTPUT_INVERTER(bpwm, u32ChannelMask) ((bpwm)->POLCTL = (u32ChannelMask))
/**
* @brief This macro get captured rising data
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. Valid values are between 0~5
* @return None
* \hideinitializer
*/
#define BPWM_GET_CAPTURE_RISING_DATA(bpwm, u32ChannelNum) ((bpwm)->CAPDAT[(u32ChannelNum)].RCAPDAT)
/**
* @brief This macro get captured falling data
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. Valid values are between 0~5
* @return None
* \hideinitializer
*/
#define BPWM_GET_CAPTURE_FALLING_DATA(bpwm, u32ChannelNum) ((bpwm)->CAPDAT[(u32ChannelNum)].FCAPDAT)
/**
* @brief This macro mask output logic to high or low
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
* Bit 0 represents channel 0, bit 1 represents channel 1...
* @param[in] u32LevelMask Output logic to high or low
* @return None
* @details This macro is used to mask output logic to high or low of specified channel(s).
* @note If u32ChannelMask parameter is 0, then mask function will be disabled.
* \hideinitializer
*/
#define BPWM_MASK_OUTPUT(bpwm, u32ChannelMask, u32LevelMask) \
{ \
(bpwm)->MSKEN = (u32ChannelMask); \
(bpwm)->MSK = (u32LevelMask); \
}
/**
* @brief This macro set the prescaler of all channels
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. This parameter is not used.
* @param[in] u32Prescaler Clock prescaler of specified channel. Valid values are between 1 ~ 0xFFF
* @return None
* \hideinitializer
*/
#define BPWM_SET_PRESCALER(bpwm, u32ChannelNum, u32Prescaler) ((bpwm)->CLKPSC = (u32Prescaler))
/**
* @brief This macro set the duty of the selected channel
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. Valid values are between 0~5
* @param[in] u32CMR Duty of specified channel. Valid values are between 0~0xFFFF
* @return None
* @note This new setting will take effect on next BPWM period
* \hideinitializer
*/
#define BPWM_SET_CMR(bpwm, u32ChannelNum, u32CMR) ((bpwm)->CMPDAT[(u32ChannelNum)] = (u32CMR))
/**
* @brief This macro get the duty of the selected channel
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. Valid values are between 0~5
* @return None
* \hideinitializer
*/
#define BPWM_GET_CMR(bpwm, u32ChannelNum) ((bpwm)->CMPDAT[(u32ChannelNum)])
/**
* @brief This macro set the period of all channels
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. This parameter is not used.
* @param[in] u32CNR Period of specified channel. Valid values are between 0~0xFFFF
* @return None
* @note This new setting will take effect on next BPWM period
* @note BPWM counter will stop if period length set to 0
* \hideinitializer
*/
#define BPWM_SET_CNR(bpwm, u32ChannelNum, u32CNR) ((bpwm)->PERIOD = (u32CNR))
/**
* @brief This macro get the period of all channels
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelNum BPWM channel number. This parameter is not used.
* @return None
* \hideinitializer
*/
#define BPWM_GET_CNR(bpwm, u32ChannelNum) ((bpwm)->PERIOD)
/**
* @brief This macro set the BPWM aligned type
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. This parameter is not used.
* @param[in] u32AlignedType BPWM aligned type, valid values are:
* - \ref BPWM_EDGE_ALIGNED
* - \ref BPWM_CENTER_ALIGNED
* @return None
* @note All channels share channel 0's setting.
* \hideinitializer
*/
#define BPWM_SET_ALIGNED_TYPE(bpwm, u32ChannelMask, u32AlignedType) ((bpwm)->CTL1 = (u32AlignedType))
/**
* @brief Clear counter of channel 0
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. This parameter is not used.
* @return None
* @details This macro is used to clear counter of channel 0
* \hideinitializer
*/
#define BPWM_CLR_COUNTER(bpwm, u32ChannelMask) ((bpwm)->CNTCLR = (BPWM_CNTCLR_CNTCLR0_Msk))
/**
* @brief Set output level at zero, compare up, period(center) and compare down of specified channel(s)
* @param[in] bpwm The pointer of the specified BPWM module
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
* Bit 0 represents channel 0, bit 1 represents channel 1...
* @param[in] u32ZeroLevel output level at zero point, valid values are:
* - \ref BPWM_OUTPUT_NOTHING
* - \ref BPWM_OUTPUT_LOW
* - \ref BPWM_OUTPUT_HIGH
* - \ref BPWM_OUTPUT_TOGGLE
* @param[in] u32CmpUpLevel output level at compare up point, valid values are:
* - \ref BPWM_OUTPUT_NOTHING
* - \ref BPWM_OUTPUT_LOW
* - \ref BPWM_OUTPUT_HIGH
* - \ref BPWM_OUTPUT_TOGGLE
* @param[in] u32PeriodLevel output level at period(center) point, valid values are:
* - \ref BPWM_OUTPUT_NOTHING
* - \ref BPWM_OUTPUT_LOW
* - \ref BPWM_OUTPUT_HIGH
* - \ref BPWM_OUTPUT_TOGGLE
* @param[in] u32CmpDownLevel output level at compare down point, valid values are:
* - \ref BPWM_OUTPUT_NOTHING
* - \ref BPWM_OUTPUT_LOW
* - \ref BPWM_OUTPUT_HIGH
* - \ref BPWM_OUTPUT_TOGGLE
* @return None
* @details This macro is used to Set output level at zero, compare up, period(center) and compare down of specified channel(s)
* \hideinitializer
*/
#define BPWM_SET_OUTPUT_LEVEL(bpwm, u32ChannelMask, u32ZeroLevel, u32CmpUpLevel, u32PeriodLevel, u32CmpDownLevel) \
do{ \
int i; \
for(i = 0; i < 6; i++) { \
if((u32ChannelMask) & (1 << i)) { \
(bpwm)->WGCTL0 = (((bpwm)->WGCTL0 & ~(3UL << (2 * i))) | ((u32ZeroLevel) << (2 * i))); \
(bpwm)->WGCTL0 = (((bpwm)->WGCTL0 & ~(3UL << (BPWM_WGCTL0_PRDPCTLn_Pos + (2 * i)))) | ((u32PeriodLevel) << (BPWM_WGCTL0_PRDPCTLn_Pos + (2 * i)))); \
(bpwm)->WGCTL1 = (((bpwm)->WGCTL1 & ~(3UL << (2 * i))) | ((u32CmpUpLevel) << (2 * i))); \
(bpwm)->WGCTL1 = (((bpwm)->WGCTL1 & ~(3UL << (BPWM_WGCTL1_CMPDCTLn_Pos + (2 * i)))) | ((u32CmpDownLevel) << (BPWM_WGCTL1_CMPDCTLn_Pos + (2 * i)))); \
} \
} \
}while(0)
/*---------------------------------------------------------------------------------------------------------*/
/* Define BPWM functions prototype */
/*---------------------------------------------------------------------------------------------------------*/
uint32_t BPWM_ConfigCaptureChannel(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32UnitTimeNsec, uint32_t u32CaptureEdge);
uint32_t BPWM_ConfigOutputChannel(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Frequency, uint32_t u32DutyCycle);
void BPWM_Start(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_Stop(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_ForceStop(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_EnableADCTrigger(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Condition);
void BPWM_DisableADCTrigger(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_ClearADCTriggerFlag(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Condition);
uint32_t BPWM_GetADCTriggerFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_EnableCapture(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_DisableCapture(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_EnableOutput(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_DisableOutput(BPWM_T *bpwm, uint32_t u32ChannelMask);
void BPWM_EnableCaptureInt(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Edge);
void BPWM_DisableCaptureInt(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Edge);
void BPWM_ClearCaptureIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32Edge);
uint32_t BPWM_GetCaptureIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_EnableDutyInt(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType);
void BPWM_DisableDutyInt(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_ClearDutyIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
uint32_t BPWM_GetDutyIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_EnablePeriodInt(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32IntPeriodType);
void BPWM_DisablePeriodInt(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_ClearPeriodIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
uint32_t BPWM_GetPeriodIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_EnableZeroInt(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_DisableZeroInt(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_ClearZeroIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
uint32_t BPWM_GetZeroIntFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_EnableLoadMode(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32LoadMode);
void BPWM_DisableLoadMode(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32LoadMode);
void BPWM_SetClockSource(BPWM_T *bpwm, uint32_t u32ChannelNum, uint32_t u32ClkSrcSel);
uint32_t BPWM_GetWrapAroundFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
void BPWM_ClearWrapAroundFlag(BPWM_T *bpwm, uint32_t u32ChannelNum);
/*@}*/ /* end of group BPWM_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group BPWM_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __BPWM_H__ */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/