447 lines
19 KiB
C
447 lines
19 KiB
C
|
/*
|
||
|
|
* The Clear BSD License
|
||
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
||
|
|
* Copyright 2016-2017 NXP
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted (subject to the limitations in the disclaimer below) provided
|
||
|
|
* that the following conditions are met:
|
||
|
|
*
|
||
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
* of conditions and the following disclaimer.
|
||
|
|
*
|
||
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
||
|
|
* other materials provided with the distribution.
|
||
|
|
*
|
||
|
|
* o Neither the name of the copyright holder nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived from this
|
||
|
|
* software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _FSL_ADC_H_
|
||
|
|
#define _FSL_ADC_H_
|
||
|
|
|
||
|
|
#include "fsl_common.h"
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @addtogroup adc_12b1msps_sar
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Definitions
|
||
|
|
******************************************************************************/
|
||
|
|
/*! @brief ADC driver version */
|
||
|
|
#define FSL_ADC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter's status flags.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_status_flags
|
||
|
|
{
|
||
|
|
kADC_ConversionActiveFlag = ADC_GS_ADACT_MASK, /*!< Conversion is active,not support w1c. */
|
||
|
|
kADC_CalibrationFailedFlag = ADC_GS_CALF_MASK, /*!< Calibration is failed,support w1c. */
|
||
|
|
kADC_AsynchronousWakeupInterruptFlag =
|
||
|
|
ADC_GS_AWKST_MASK, /*!< Asynchronous wakeup interrupt occured, support w1c. */
|
||
|
|
} adc_status_flags_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Reference voltage source.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_reference_voltage_source
|
||
|
|
{
|
||
|
|
kADC_ReferenceVoltageSourceAlt0 = 0U, /*!< For external pins pair of VrefH and VrefL. */
|
||
|
|
} adc_reference_voltage_source_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Sample time duration.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_sample_period_mode
|
||
|
|
{
|
||
|
|
/* This group of enumeration is for internal use which is related to register setting. */
|
||
|
|
kADC_SamplePeriod2or12Clocks = 0U, /*!< Long sample 12 clocks or short sample 2 clocks. */
|
||
|
|
kADC_SamplePeriod4or16Clocks = 1U, /*!< Long sample 16 clocks or short sample 4 clocks. */
|
||
|
|
kADC_SamplePeriod6or20Clocks = 2U, /*!< Long sample 20 clocks or short sample 6 clocks. */
|
||
|
|
kADC_SamplePeriod8or24Clocks = 3U, /*!< Long sample 24 clocks or short sample 8 clocks. */
|
||
|
|
/* This group of enumeration is for a public user. */
|
||
|
|
/* For long sample mode. */
|
||
|
|
kADC_SamplePeriodLong12Clcoks = kADC_SamplePeriod2or12Clocks, /*!< Long sample 12 clocks. */
|
||
|
|
kADC_SamplePeriodLong16Clcoks = kADC_SamplePeriod4or16Clocks, /*!< Long sample 16 clocks. */
|
||
|
|
kADC_SamplePeriodLong20Clcoks = kADC_SamplePeriod6or20Clocks, /*!< Long sample 20 clocks. */
|
||
|
|
kADC_SamplePeriodLong24Clcoks = kADC_SamplePeriod8or24Clocks, /*!< Long sample 24 clocks. */
|
||
|
|
/* For short sample mode. */
|
||
|
|
kADC_SamplePeriodShort2Clocks = kADC_SamplePeriod2or12Clocks, /*!< Short sample 2 clocks. */
|
||
|
|
kADC_SamplePeriodShort4Clocks = kADC_SamplePeriod4or16Clocks, /*!< Short sample 4 clocks. */
|
||
|
|
kADC_SamplePeriodShort6Clocks = kADC_SamplePeriod6or20Clocks, /*!< Short sample 6 clocks. */
|
||
|
|
kADC_SamplePeriodShort8Clocks = kADC_SamplePeriod8or24Clocks, /*!< Short sample 8 clocks. */
|
||
|
|
} adc_sample_period_mode_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Clock source.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_clock_source
|
||
|
|
{
|
||
|
|
kADC_ClockSourceIPG = 0U, /*!< Select IPG clock to generate ADCK. */
|
||
|
|
kADC_ClockSourceIPGDiv2 = 1U, /*!< Select IPG clock divided by 2 to generate ADCK. */
|
||
|
|
#if !(defined(FSL_FEATURE_ADC_SUPPORT_ALTCLK_REMOVE) && FSL_FEATURE_ADC_SUPPORT_ALTCLK_REMOVE)
|
||
|
|
kADC_ClockSourceALT = 2U, /*!< Select alternate clock to generate ADCK. */
|
||
|
|
#endif
|
||
|
|
kADC_ClockSourceAD = 3U, /*!< Select Asynchronous clock to generate ADCK. */
|
||
|
|
} adc_clock_source_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Clock divider for the converter.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_clock_drvier
|
||
|
|
{
|
||
|
|
kADC_ClockDriver1 = 0U, /*!< For divider 1 from the input clock to the module. */
|
||
|
|
kADC_ClockDriver2 = 1U, /*!< For divider 2 from the input clock to the module. */
|
||
|
|
kADC_ClockDriver4 = 2U, /*!< For divider 4 from the input clock to the module. */
|
||
|
|
kADC_ClockDriver8 = 3U, /*!< For divider 8 from the input clock to the module. */
|
||
|
|
} adc_clock_driver_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter's resolution.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_resolution
|
||
|
|
{
|
||
|
|
kADC_Resolution8Bit = 0U, /*!< Single End 8-bit resolution. */
|
||
|
|
kADC_Resolution10Bit = 1U, /*!< Single End 10-bit resolution. */
|
||
|
|
kADC_Resolution12Bit = 2U, /*!< Single End 12-bit resolution. */
|
||
|
|
} adc_resolution_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter hardware compare mode.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_hardware_compare_mode
|
||
|
|
{
|
||
|
|
kADC_HardwareCompareMode0 = 0U, /*!< Compare true if the result is less than the value1. */
|
||
|
|
kADC_HardwareCompareMode1 = 1U, /*!< Compare true if the result is greater than or equal to value1. */
|
||
|
|
kADC_HardwareCompareMode2 = 2U, /*!< Value1 <= Value2, compare true if the result is less than value1 Or
|
||
|
|
the result is Greater than value2.
|
||
|
|
Value1 > Value2, compare true if the result is less than value1 And the
|
||
|
|
result is greater than value2*/
|
||
|
|
kADC_HardwareCompareMode3 = 3U, /*!< Value1 <= Value2, compare true if the result is greater than or equal
|
||
|
|
to value1 And the result is less than or equal to value2.
|
||
|
|
Value1 > Value2, compare true if the result is greater than or equal to
|
||
|
|
value1 Or the result is less than or equal to value2. */
|
||
|
|
} adc_hardware_compare_mode_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter hardware average mode.
|
||
|
|
*/
|
||
|
|
typedef enum _adc_hardware_average_mode
|
||
|
|
{
|
||
|
|
kADC_HardwareAverageCount4 = 0U, /*!< For hardware average with 4 samples. */
|
||
|
|
kADC_HardwareAverageCount8 = 1U, /*!< For hardware average with 8 samples. */
|
||
|
|
kADC_HardwareAverageCount16 = 2U, /*!< For hardware average with 16 samples. */
|
||
|
|
kADC_HardwareAverageCount32 = 3U, /*!< For hardware average with 32 samples. */
|
||
|
|
kADC_HardwareAverageDiasable = 4U, /*!< Disable the hardware average function. */
|
||
|
|
} adc_hardware_average_mode_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter configuration.
|
||
|
|
*/
|
||
|
|
typedef struct _adc_config
|
||
|
|
{
|
||
|
|
bool enableOverWrite; /*!< Enable the overwriting. */
|
||
|
|
bool enableContinuousConversion; /*!< Enable the continuous conversion mode. */
|
||
|
|
bool enableHighSpeed; /*!< Enable the high-speed mode. */
|
||
|
|
bool enableLowPower; /*!< Enable the low power mode. */
|
||
|
|
bool enableLongSample; /*!< Enable the long sample mode. */
|
||
|
|
bool enableAsynchronousClockOutput; /*!< Enable the asynchronous clock output. */
|
||
|
|
adc_reference_voltage_source_t referenceVoltageSource; /*!< Select the reference voltage source. */
|
||
|
|
adc_sample_period_mode_t samplePeriodMode; /*!< Select the sample period in long sample mode or short mode. */
|
||
|
|
adc_clock_source_t clockSource; /*!< Select the input clock source to generate the internal clock ADCK. */
|
||
|
|
adc_clock_driver_t clockDriver; /*!< Select the divide ratio used by the ADC to generate the internal clock ADCK. */
|
||
|
|
adc_resolution_t resolution; /*!< Select the ADC resolution mode. */
|
||
|
|
} adc_config_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Converter Offset configuration.
|
||
|
|
*/
|
||
|
|
typedef struct _adc_offest_config
|
||
|
|
{
|
||
|
|
bool enableSigned; /*!< if false,The offset value is added with the raw result.
|
||
|
|
if true,The offset value is subtracted from the raw converted value. */
|
||
|
|
uint32_t offsetValue; /*!< User configurable offset value(0-4095). */
|
||
|
|
} adc_offest_config_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief ADC hardware compare configuration.
|
||
|
|
*
|
||
|
|
* In kADC_HardwareCompareMode0, compare true if the result is less than the value1.
|
||
|
|
* In kADC_HardwareCompareMode1, compare true if the result is greater than or equal to value1.
|
||
|
|
* In kADC_HardwareCompareMode2, Value1 <= Value2, compare true if the result is less than value1 Or the result is
|
||
|
|
* Greater than value2.
|
||
|
|
* Value1 > Value2, compare true if the result is less than value1 And the result is
|
||
|
|
* Greater than value2.
|
||
|
|
* In kADC_HardwareCompareMode3, Value1 <= Value2, compare true if the result is greater than or equal to value1 And the
|
||
|
|
* result is less than or equal to value2.
|
||
|
|
* Value1 > Value2, compare true if the result is greater than or equal to value1 Or the
|
||
|
|
* result is less than or equal to value2.
|
||
|
|
*/
|
||
|
|
typedef struct _adc_hardware_compare_config
|
||
|
|
{
|
||
|
|
adc_hardware_compare_mode_t hardwareCompareMode; /*!< Select the hardware compare mode.
|
||
|
|
See "adc_hardware_compare_mode_t". */
|
||
|
|
uint16_t value1; /*!< Setting value1(0-4095) for hardware compare mode. */
|
||
|
|
uint16_t value2; /*!< Setting value2(0-4095) for hardware compare mode. */
|
||
|
|
} adc_hardware_compare_config_t;
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief ADC channel conversion configuration.
|
||
|
|
*/
|
||
|
|
typedef struct _adc_channel_config
|
||
|
|
{
|
||
|
|
uint32_t channelNumber; /*!< Setting the conversion channel number. The available range is 0-31.
|
||
|
|
See channel connection information for each chip in Reference
|
||
|
|
Manual document. */
|
||
|
|
bool enableInterruptOnConversionCompleted; /*!< Generate an interrupt request once the conversion is completed. */
|
||
|
|
} adc_channel_config_t;
|
||
|
|
/*******************************************************************************
|
||
|
|
* API
|
||
|
|
******************************************************************************/
|
||
|
|
#if defined(__cplusplus)
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @name Initialization
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Initialize the ADC module.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param config Pointer to "adc_config_t" structure.
|
||
|
|
*/
|
||
|
|
void ADC_Init(ADC_Type *base, const adc_config_t *config);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief De-initializes the ADC module.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
*/
|
||
|
|
void ADC_Deinit(ADC_Type *base);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets an available pre-defined settings for the converter's configuration.
|
||
|
|
*
|
||
|
|
* This function initializes the converter configuration structure with available settings. The default values are:
|
||
|
|
* @code
|
||
|
|
* config->enableAsynchronousClockOutput = true;
|
||
|
|
* config->enableOverWrite = false;
|
||
|
|
* config->enableContinuousConversion = false;
|
||
|
|
* config->enableHighSpeed = false;
|
||
|
|
* config->enableLowPower = false;
|
||
|
|
* config->enableLongSample = false;
|
||
|
|
* config->referenceVoltageSource = kADC_ReferenceVoltageSourceAlt0;
|
||
|
|
* config->samplePeriodMode = kADC_SamplePeriod2or12Clocks;
|
||
|
|
* config->clockSource = kADC_ClockSourceAD;
|
||
|
|
* config->clockDriver = kADC_ClockDriver1;
|
||
|
|
* config->resolution = kADC_Resolution12Bit;
|
||
|
|
* @endcode
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param config Pointer to the configuration structure.
|
||
|
|
*/
|
||
|
|
void ADC_GetDefaultConfig(adc_config_t *config);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Configures the conversion channel.
|
||
|
|
*
|
||
|
|
* This operation triggers the conversion when in software trigger mode. When in hardware trigger mode, this API
|
||
|
|
* configures the channel while the external trigger source helps to trigger the conversion.
|
||
|
|
*
|
||
|
|
* Note that the "Channel Group" has a detailed description.
|
||
|
|
* To allow sequential conversions of the ADC to be triggered by internal peripherals, the ADC has more than one
|
||
|
|
* group of status and control registers, one for each conversion. The channel group parameter indicates which group of
|
||
|
|
* registers are used, for example channel group 0 is for Group A registers and channel group 1 is for Group B
|
||
|
|
* registers. The
|
||
|
|
* channel groups are used in a "ping-pong" approach to control the ADC operation. At any point, only one of
|
||
|
|
* the channel groups is actively controlling ADC conversions. The channel group 0 is used for both software and
|
||
|
|
* hardware
|
||
|
|
* trigger modes. Channel groups 1 and greater indicate potentially multiple channel group registers for
|
||
|
|
* use only in hardware trigger mode. See the chip configuration information in the appropriate MCU reference manual
|
||
|
|
* about the
|
||
|
|
* number of SC1n registers (channel groups) specific to this device. None of the channel groups 1 or greater are used
|
||
|
|
* for software trigger operation. Therefore, writing to these channel groups does not initiate a new conversion.
|
||
|
|
* Updating the channel group 0 while a different channel group is actively controlling a conversion is allowed and
|
||
|
|
* vice versa. Writing any of the channel group registers while that specific channel group is actively controlling a
|
||
|
|
* conversion aborts the current conversion.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param channelGroup Channel group index.
|
||
|
|
* @param config Pointer to the "adc_channel_config_t" structure for the conversion channel.
|
||
|
|
*/
|
||
|
|
void ADC_SetChannelConfig(ADC_Type *base, uint32_t channelGroup, const adc_channel_config_t *config);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets the conversion value.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param channelGroup Channel group index.
|
||
|
|
*
|
||
|
|
* @return Conversion value.
|
||
|
|
*/
|
||
|
|
static inline uint32_t ADC_GetChannelConversionValue(ADC_Type *base, uint32_t channelGroup)
|
||
|
|
{
|
||
|
|
assert(channelGroup < ADC_R_COUNT);
|
||
|
|
|
||
|
|
return base->R[channelGroup];
|
||
|
|
}
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets the status flags of channel.
|
||
|
|
*
|
||
|
|
* A conversion is completed when the result of the conversion is transferred into the data
|
||
|
|
* result registers. (provided the compare function & hardware averaging is disabled), this is
|
||
|
|
* indicated by the setting of COCOn. If hardware averaging is enabled, COCOn sets only,
|
||
|
|
* if the last of the selected number of conversions is complete. If the compare function is
|
||
|
|
* enabled, COCOn sets and conversion result data is transferred only if the compare
|
||
|
|
* condition is true. If both hardware averaging and compare functions are enabled, then
|
||
|
|
* COCOn sets only if the last of the selected number of conversions is complete and the
|
||
|
|
* compare condition is true.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param channelGroup Channel group index.
|
||
|
|
*
|
||
|
|
* @return Status flags of channel.return 0 means COCO flag is 0,return 1 means COCOflag is 1.
|
||
|
|
*/
|
||
|
|
static inline uint32_t ADC_GetChannelStatusFlags(ADC_Type *base, uint32_t channelGroup)
|
||
|
|
{
|
||
|
|
assert(channelGroup < ADC_HC_COUNT);
|
||
|
|
|
||
|
|
/* If flag is set,return 1,otherwise, return 0. */
|
||
|
|
return (((base->HS) & (1U << channelGroup)) >> channelGroup);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Automates the hardware calibration.
|
||
|
|
*
|
||
|
|
* This auto calibration helps to adjust the plus/minus side gain automatically.
|
||
|
|
* Execute the calibration before using the converter. Note that the software trigger should be used
|
||
|
|
* during calibration.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
*
|
||
|
|
* @return Execution status.
|
||
|
|
* @retval kStatus_Success Calibration is done successfully.
|
||
|
|
* @retval kStatus_Fail Calibration has failed.
|
||
|
|
*/
|
||
|
|
status_t ADC_DoAutoCalibration(ADC_Type *base);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Set user defined offset.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param config Pointer to "adc_offest_config_t" structure.
|
||
|
|
*/
|
||
|
|
void ADC_SetOffsetConfig(ADC_Type *base, const adc_offest_config_t *config);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Enables generating the DMA trigger when the conversion is complete.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param enable Switcher of the DMA feature. "true" means enabled, "false" means not enabled.
|
||
|
|
*/
|
||
|
|
static inline void ADC_EnableDMA(ADC_Type *base, bool enable)
|
||
|
|
{
|
||
|
|
if (enable)
|
||
|
|
{
|
||
|
|
base->GC |= ADC_GC_DMAEN_MASK;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
base->GC &= ~ADC_GC_DMAEN_MASK;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Enables the hardware trigger mode.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param enable Switcher of the trigger mode. "true" means hardware tirgger mode,"false" means software mode.
|
||
|
|
*/
|
||
|
|
#if !(defined(FSL_FEATURE_ADC_SUPPORT_HARDWARE_TRIGGER_REMOVE) && FSL_FEATURE_ADC_SUPPORT_HARDWARE_TRIGGER_REMOVE)
|
||
|
|
static inline void ADC_EnableHardwareTrigger(ADC_Type *base, bool enable)
|
||
|
|
{
|
||
|
|
if (enable)
|
||
|
|
{
|
||
|
|
base->CFG |= ADC_CFG_ADTRG_MASK;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
base->CFG &= ~ADC_CFG_ADTRG_MASK;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Configures the hardware compare mode.
|
||
|
|
*
|
||
|
|
* The hardware compare mode provides a way to process the conversion result automatically by using hardware. Only the
|
||
|
|
* result
|
||
|
|
* in the compare range is available. To compare the range, see "adc_hardware_compare_mode_t" or the appopriate
|
||
|
|
* reference
|
||
|
|
* manual for more information.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param Pointer to "adc_hardware_compare_config_t" structure.
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
void ADC_SetHardwareCompareConfig(ADC_Type *base, const adc_hardware_compare_config_t *config);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Configures the hardware average mode.
|
||
|
|
*
|
||
|
|
* The hardware average mode provides a way to process the conversion result automatically by using hardware. The
|
||
|
|
* multiple
|
||
|
|
* conversion results are accumulated and averaged internally making them easier to read.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param mode Setting the hardware average mode. See "adc_hardware_average_mode_t".
|
||
|
|
*/
|
||
|
|
void ADC_SetHardwareAverageConfig(ADC_Type *base, adc_hardware_average_mode_t mode);
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Gets the converter's status flags.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
*
|
||
|
|
* @return Flags' mask if indicated flags are asserted. See "adc_status_flags_t".
|
||
|
|
*/
|
||
|
|
static inline uint32_t ADC_GetStatusFlags(ADC_Type *base)
|
||
|
|
{
|
||
|
|
return base->GS;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*!
|
||
|
|
* @brief Clears the converter's status falgs.
|
||
|
|
*
|
||
|
|
* @param base ADC peripheral base address.
|
||
|
|
* @param mask Mask value for the cleared flags. See "adc_status_flags_t".
|
||
|
|
*/
|
||
|
|
void ADC_ClearStatusFlags(ADC_Type *base, uint32_t mask);
|
||
|
|
|
||
|
|
#if defined(__cplusplus)
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* _FSL_ADC_H_ */
|