libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/nuvoton/libraries/m480/StdDriver/inc/nu_eadc.h

621 lines
36 KiB
C
Raw Normal View History

Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
/**************************************************************************//**
* @file nu_eadc.h
* @version V0.10
* @brief M480 series EADC driver header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_EADC_H__
#define __NU_EADC_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup EADC_Driver EADC Driver
@{
*/
/** @addtogroup EADC_EXPORTED_CONSTANTS EADC Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_CTL Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_CTL_DIFFEN_SINGLE_END (0UL<<EADC_CTL_DIFFEN_Pos) /*!< Single-end input mode \hideinitializer */
#define EADC_CTL_DIFFEN_DIFFERENTIAL (1UL<<EADC_CTL_DIFFEN_Pos) /*!< Differential input mode \hideinitializer */
#define EADC_CTL_DMOF_STRAIGHT_BINARY (0UL<<EADC_CTL_DMOF_Pos) /*!< Select the straight binary format as the output format of the conversion result \hideinitializer */
#define EADC_CTL_DMOF_TWOS_COMPLEMENT (1UL<<EADC_CTL_DMOF_Pos) /*!< Select the 2's complement format as the output format of the conversion result \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_SCTL Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_SCTL_CHSEL(x) ((x) << EADC_SCTL_CHSEL_Pos) /*!< A/D sample module channel selection \hideinitializer */
#define EADC_SCTL_TRGDLYDIV(x) ((x) << EADC_SCTL_TRGDLYDIV_Pos) /*!< A/D sample module start of conversion trigger delay clock divider selection \hideinitializer */
#define EADC_SCTL_TRGDLYCNT(x) ((x) << EADC_SCTL_TRGDLYCNT_Pos) /*!< A/D sample module start of conversion trigger delay time \hideinitializer */
#define EADC_SOFTWARE_TRIGGER (0UL<<EADC_SCTL_TRGSEL_Pos) /*!< Software trigger \hideinitializer */
#define EADC_FALLING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin falling edge trigger \hideinitializer */
#define EADC_RISING_EDGE_TRIGGER (EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin rising edge trigger \hideinitializer */
#define EADC_FALLING_RISING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin both falling and rising edge trigger \hideinitializer */
#define EADC_ADINT0_TRIGGER (2UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT0 interrupt EOC pulse trigger \hideinitializer */
#define EADC_ADINT1_TRIGGER (3UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT1 interrupt EOC pulse trigger \hideinitializer */
#define EADC_TIMER0_TRIGGER (4UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer0 overflow pulse trigger \hideinitializer */
#define EADC_TIMER1_TRIGGER (5UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer1 overflow pulse trigger \hideinitializer */
#define EADC_TIMER2_TRIGGER (6UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer2 overflow pulse trigger \hideinitializer */
#define EADC_TIMER3_TRIGGER (7UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer3 overflow pulse trigger \hideinitializer */
#define EADC_EPWM0TG0_TRIGGER (8UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG0 trigger \hideinitializer */
#define EADC_EPWM0TG1_TRIGGER (9UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG1 trigger \hideinitializer */
#define EADC_EPWM0TG2_TRIGGER (0xAUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG2 trigger \hideinitializer */
#define EADC_EPWM0TG3_TRIGGER (0xBUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG3 trigger \hideinitializer */
#define EADC_EPWM0TG4_TRIGGER (0xCUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG4 trigger \hideinitializer */
#define EADC_EPWM0TG5_TRIGGER (0xDUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM0TG5 trigger \hideinitializer */
#define EADC_EPWM1TG0_TRIGGER (0xEUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG0 trigger \hideinitializer */
#define EADC_EPWM1TG1_TRIGGER (0xFUL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG1 trigger \hideinitializer */
#define EADC_EPWM1TG2_TRIGGER (0x10UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG2 trigger \hideinitializer */
#define EADC_EPWM1TG3_TRIGGER (0x11UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG3 trigger \hideinitializer */
#define EADC_EPWM1TG4_TRIGGER (0x12UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG4 trigger \hideinitializer */
#define EADC_EPWM1TG5_TRIGGER (0x13UL<<EADC_SCTL_TRGSEL_Pos) /*!< EPWM1TG5 trigger \hideinitializer */
#define EADC_BPWM0TG_TRIGGER (0x14UL<<EADC_SCTL_TRGSEL_Pos) /*!< BPWM0TG trigger \hideinitializer */
#define EADC_BPWM1TG_TRIGGER (0x15UL<<EADC_SCTL_TRGSEL_Pos) /*!< BPWM1TG trigger \hideinitializer */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_1 (0<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/1 \hideinitializer */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_2 (0x1UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/2 \hideinitializer */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_4 (0x2UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/4 \hideinitializer */
#define EADC_SCTL_TRGDLYDIV_DIVIDER_16 (0x3UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/16 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* EADC_CMP Constant Definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define EADC_CMP_CMPCOND_LESS_THAN (0UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "less than" \hideinitializer */
#define EADC_CMP_CMPCOND_GREATER_OR_EQUAL (1UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "greater than or equal to" \hideinitializer */
#define EADC_CMP_CMPWEN_ENABLE (EADC_CMP_CMPWEN_Msk) /*!< Compare window mode enable \hideinitializer */
#define EADC_CMP_CMPWEN_DISABLE (~EADC_CMP_CMPWEN_Msk) /*!< Compare window mode disable \hideinitializer */
#define EADC_CMP_ADCMPIE_ENABLE (EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt enable \hideinitializer */
#define EADC_CMP_ADCMPIE_DISABLE (~EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt disable \hideinitializer */
/*@}*/ /* end of group EADC_EXPORTED_CONSTANTS */
/** @addtogroup EADC_EXPORTED_FUNCTIONS EADC Exported Functions
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* EADC Macro Definitions */
/*---------------------------------------------------------------------------------------------------------*/
/**
* @brief A/D Converter Control Circuits Reset.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details ADCRST bit (EADC_CT[1]) remains 1 during ADC reset, when ADC reset end, the ADCRST bit is automatically cleared to 0.
* \hideinitializer
*/
#define EADC_CONV_RESET(eadc) ((eadc)->CTL |= EADC_CTL_ADCRST_Msk)
/**
* @brief Enable PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details When A/D conversion is completed, the converted data is loaded into EADC_DATn (n: 0 ~ 18) register,
* user can enable this bit to generate a PDMA data transfer request.
* @note When set PDMAEN bit (EADC_CTL[11]), user must set ADINTENn (EADC_CTL[5:2], n=0~3) = 0 to disable interrupt.
* \hideinitializer
*/
#define EADC_ENABLE_PDMA(eadc) ((eadc)->CTL |= EADC_CTL_PDMAEN_Msk)
/**
* @brief Disable PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable PDMA transfer.
* \hideinitializer
*/
#define EADC_DISABLE_PDMA(eadc) ((eadc)->CTL &= (~EADC_CTL_PDMAEN_Msk))
/**
* @brief Enable Sample Module PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be disabled, valid range are between 1~0x7FFFF.
* @return None
* @details When A/D conversion is completed, the converted data is loaded into EADC_DATn (n: 0 ~ 18) register,
* user can enable this bit to generate a PDMA data transfer request.
* \hideinitializer
*/
#define EADC_ENABLE_SAMPLE_MODULE_PDMA(eadc, u32ModuleMask) ((eadc)->PDMACTL |= u32ModuleMask)
/**
* @brief Disable Sample Module PDMA transfer.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be disabled, valid range are between 1~0x7FFFF.
* @return None
* @details This macro is used to disable sample module PDMA transfer.
* \hideinitializer
*/
#define EADC_DISABLE_SAMPLE_MODULE_PDMA(eadc, u32ModuleMask) ((eadc)->PDMACTL &= (~u32ModuleMask))
/**
* @brief Enable double buffer mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3.
* @return None
* @details The ADC controller supports a double buffer mode in sample module 0~3.
* If user enable DBMEN (EADC_SCTLn[23], n=0~3), the double buffer mode will enable.
* \hideinitializer
*/
#define EADC_ENABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_DBMEN_Msk)
/**
* @brief Disable double buffer mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3.
* @return None
* @details Sample has one sample result register.
* \hideinitializer
*/
#define EADC_DISABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_DBMEN_Msk)
/**
* @brief Set ADIFn at A/D end of conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15.
* @return None
* @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the start of conversion.
* \hideinitializer
*/
#define EADC_ENABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_INTPOS_Msk)
/**
* @brief Set ADIFn at A/D start of conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15.
* @return None
* @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the end of conversion.
* \hideinitializer
*/
#define EADC_DISABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_INTPOS_Msk)
/**
* @brief Enable the interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status.
* This parameter decides which interrupts will be enabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3.
* @return None
* @details The A/D converter generates a conversion end ADIFn (EADC_STATUS2[n]) upon the end of specific sample module A/D conversion.
* If ADCIENn bit (EADC_CTL[n+2]) is set then conversion end interrupt request ADINTn is generated (n=0~3).
* \hideinitializer
*/
#define EADC_ENABLE_INT(eadc, u32Mask) ((eadc)->CTL |= ((u32Mask) << EADC_CTL_ADCIEN0_Pos))
/**
* @brief Disable the interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status.
* This parameter decides which interrupts will be disabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3.
* @return None
* @details Specific sample module A/D ADINT0 interrupt function Disabled.
* \hideinitializer
*/
#define EADC_DISABLE_INT(eadc, u32Mask) ((eadc)->CTL &= ~((u32Mask) << EADC_CTL_ADCIEN0_Pos))
/**
* @brief Enable the sample module interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be enabled, valid range are between 1~0x7FFFF.
* @return None
* @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address.
* \hideinitializer
*/
#define EADC_ENABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] |= (u32ModuleMask))
/**
* @brief Disable the sample module interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3.
* @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status.
* This parameter decides which sample module interrupts will be disabled, valid range are between 1~0x7FFFF.
* @return None
* @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address.
* \hideinitializer
*/
#define EADC_DISABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] &= ~(u32ModuleMask))
/**
* @brief Set the input mode output format.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Format Decides the output format. Valid values are:
* - EADC_CTL_DMOF_STRAIGHT_BINARY :Select the straight binary format as the output format of the conversion result.
* - EADC_CTL_DMOF_TWOS_COMPLEMENT :Select the 2's complement format as the output format of the conversion result.
* @return None
* @details The macro is used to set A/D input mode output format.
* \hideinitializer
*/
#define EADC_SET_DMOF(eadc, u32Format) ((eadc)->CTL = ((eadc)->CTL & ~EADC_CTL_DMOF_Msk) | (u32Format))
/**
* @brief Start the A/D conversion.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module.
* This parameter decides which sample module will be conversion, valid range are between 1~0x7FFFF.
* Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module 18.
* @return None
* @details After write EADC_SWTRG register to start ADC conversion, the EADC_PENDSTS register will show which SAMPLE will conversion.
* \hideinitializer
*/
#define EADC_START_CONV(eadc, u32ModuleMask) ((eadc)->SWTRG = (u32ModuleMask))
/**
* @brief Cancel the conversion for sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module.
* This parameter decides which sample module will stop the conversion, valid range are between 1~0x7FFFF.
* Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module18.
* @return None
* @details If user want to disable the conversion of the sample module, user can write EADC_PENDSTS register to clear it.
* \hideinitializer
*/
#define EADC_STOP_CONV(eadc, u32ModuleMask) ((eadc)->PENDSTS = (u32ModuleMask))
/**
* @brief Get the conversion pending flag.
* @param[in] eadc The pointer of the specified EADC module.
* @return Return the conversion pending sample module.
* @details This STPFn(EADC_PENDSTS[18:0]) bit remains 1 during pending state, when the respective ADC conversion is end,
* the STPFn (n=0~18) bit is automatically cleared to 0.
* \hideinitializer
*/
#define EADC_GET_PENDING_CONV(eadc) ((eadc)->PENDSTS)
/**
* @brief Get the conversion data of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18.
* @return Return the conversion data of the user-specified sample module.
* @details This macro is used to read RESULT bit (EADC_DATn[15:0], n=0~18) field to get conversion data.
* \hideinitializer
*/
#define EADC_GET_CONV_DATA(eadc, u32ModuleNum) ((eadc)->DAT[(u32ModuleNum)] & EADC_DAT_RESULT_Msk)
/**
* @brief Get the data overrun flag of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of data overrun status bits. Each bit corresponds to a data overrun status, valid range are between 1~0x7FFFF.
* @return Return the data overrun flag of the user-specified sample module.
* @details This macro is used to read OV bit (EADC_STATUS0[31:16], EADC_STATUS1[18:16]) field to get data overrun status.
* \hideinitializer
*/
#define EADC_GET_DATA_OVERRUN_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 >> EADC_STATUS0_OV_Pos) | ((eadc)->STATUS1 & EADC_STATUS1_OV_Msk)) & (u32ModuleMask))
/**
* @brief Get the data valid flag of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of data valid status bits. Each bit corresponds to a data valid status, valid range are between 1~0x7FFFF.
* @return Return the data valid flag of the user-specified sample module.
* @details This macro is used to read VALID bit (EADC_STATUS0[15:0], EADC_STATUS1[2:0]) field to get data valid status.
* \hideinitializer
*/
#define EADC_GET_DATA_VALID_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 & EADC_STATUS0_VALID_Msk) | (((eadc)->STATUS1 & EADC_STATUS1_VALID_Msk) << 16)) & (u32ModuleMask))
/**
* @brief Get the double data of the user-specified sample module.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18.
* @return Return the double data of the user-specified sample module.
* @details This macro is used to read RESULT bit (EADC_DDATn[15:0], n=0~3) field to get conversion data.
* \hideinitializer
*/
#define EADC_GET_DOUBLE_DATA(eadc, u32ModuleNum) ((eadc)->DDAT[(u32ModuleNum)] & EADC_DDAT0_RESULT_Msk)
/**
* @brief Get the user-specified interrupt flags.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask The combination of interrupt status bits. Each bit corresponds to a interrupt status.
* Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3.
* Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3.
* @return Return the user-specified interrupt flags.
* @details This macro is used to get the user-specified interrupt flags.
* \hideinitializer
*/
#define EADC_GET_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 & (u32Mask))
/**
* @brief Get the user-specified sample module overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status, valid range are between 1~0x7FFFF.
* @return Return the user-specified sample module overrun flags.
* @details This macro is used to get the user-specified sample module overrun flags.
* \hideinitializer
*/
#define EADC_GET_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS & (u32ModuleMask))
/**
* @brief Clear the selected interrupt status bits.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32Mask The combination of compare interrupt status bits. Each bit corresponds to a compare interrupt status.
* Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3.
* Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3.
* @return None
* @details This macro is used to clear clear the selected interrupt status bits.
* \hideinitializer
*/
#define EADC_CLR_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 = (u32Mask))
/**
* @brief Clear the selected sample module overrun status bits.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status.
* Bit 0 is SPOVF0, bit 1 is SPOVF1..., bit 18 is SPOVF18.
* @return None
* @details This macro is used to clear the selected sample module overrun status bits.
* \hideinitializer
*/
#define EADC_CLR_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS = (u32ModuleMask))
/**
* @brief Check all sample module A/D result data register overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module data register overrun flag is set to 1.
* @retval 1 Any one of sample module data register overrun flag is set to 1.
* @details The AOV bit (EADC_STATUS2[27]) will keep 1 when any one of sample module data register overrun flag OVn (EADC_DATn[16]) is set to 1.
* \hideinitializer
*/
#define EADC_IS_DATA_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AOV_Msk) >> EADC_STATUS2_AOV_Pos)
/**
* @brief Check all sample module A/D result data register valid flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module data register valid flag is set to 1.
* @retval 1 Any one of sample module data register valid flag is set to 1.
* @details The AVALID bit (EADC_STATUS2[26]) will keep 1 when any one of sample module data register valid flag VALIDn (EADC_DATn[17]) is set to 1.
* \hideinitializer
*/
#define EADC_IS_DATA_VALID(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AVALID_Msk) >> EADC_STATUS2_AVALID_Pos)
/**
* @brief Check all A/D sample module start of conversion overrun flags.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of sample module event overrun flag is set to 1.
* @retval 1 Any one of sample module event overrun flag is set to 1.
* @details The STOVF bit (EADC_STATUS2[25]) will keep 1 when any one of sample module event overrun flag SPOVFn (EADC_OVSTS[n]) is set to 1.
* \hideinitializer
*/
#define EADC_IS_SAMPLE_MODULE_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_STOVF_Msk) >> EADC_STATUS2_STOVF_Pos)
/**
* @brief Check all A/D interrupt flag overrun bits.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 None of ADINT interrupt flag is overwritten to 1.
* @retval 1 Any one of ADINT interrupt flag is overwritten to 1.
* @details The ADOVIF bit (EADC_STATUS2[24]) will keep 1 when any one of ADINT interrupt flag ADOVIFn (EADC_STATUS2[11:8]) is overwritten to 1.
* \hideinitializer
*/
#define EADC_IS_INT_FLAG_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_ADOVIF_Msk) >> EADC_STATUS2_ADOVIF_Pos)
/**
* @brief Get the busy state of EADC.
* @param[in] eadc The pointer of the specified EADC module.
* @retval 0 Idle state.
* @retval 1 Busy state.
* @details This macro is used to read BUSY bit (EADC_STATUS2[23]) to get busy state.
* \hideinitializer
*/
#define EADC_IS_BUSY(eadc) (((eadc)->STATUS2 & EADC_STATUS2_BUSY_Msk) >> EADC_STATUS2_BUSY_Pos)
/**
* @brief Configure the comparator 0 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP0(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 0 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
* \hideinitializer
*/
#define EADC_ENABLE_CMP0(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
u32MatchCount) ((eadc)->CMP[0] = (((eadc)->CMP[0] & ~(EADC_CMP_CMPSPL_Msk|EADC_CMP_CMPCOND_Msk|EADC_CMP_CMPDAT_Msk|EADC_CMP_CMPMCNT_Msk))|\
(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
EADC_CMP_ADCMPEN_Msk)))
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
/**
* @brief Configure the comparator 1 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP1(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 1 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
* \hideinitializer
*/
#define EADC_ENABLE_CMP1(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
u32MatchCount) ((eadc)->CMP[1] = (((eadc)->CMP[1] & ~(EADC_CMP_CMPSPL_Msk|EADC_CMP_CMPCOND_Msk|EADC_CMP_CMPDAT_Msk|EADC_CMP_CMPMCNT_Msk))|\
(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
EADC_CMP_ADCMPEN_Msk)))
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
/**
* @brief Configure the comparator 2 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP2(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 2 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
* \hideinitializer
*/
#define EADC_ENABLE_CMP2(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
u32MatchCount) ((eadc)->CMP[2] = (((eadc)->CMP[2] & ~(EADC_CMP_CMPSPL_Msk|EADC_CMP_CMPCOND_Msk|EADC_CMP_CMPDAT_Msk|EADC_CMP_CMPMCNT_Msk))|\
(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
EADC_CMP_ADCMPEN_Msk)))
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
/**
* @brief Configure the comparator 3 and enable it.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18.
* @param[in] u32Condition specifies the compare condition. Valid values are:
* - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value"
* - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value
* @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF.
* @param[in] u32MatchCount specifies the match count setting, valid range are between 1~0xF.
* @return None
* @details For example, ADC_ENABLE_CMP3(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE);
* Means EADC will assert comparator 3 flag if sample module 5 conversion result is greater or
* equal to 0x800 for 10 times continuously, and a compare interrupt request is generated.
* \hideinitializer
*/
#define EADC_ENABLE_CMP3(eadc,\
u32ModuleNum,\
u32Condition,\
u16CMPData,\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
u32MatchCount) ((eadc)->CMP[3] = (((eadc)->CMP[3] & ~(EADC_CMP_CMPSPL_Msk|EADC_CMP_CMPCOND_Msk|EADC_CMP_CMPDAT_Msk|EADC_CMP_CMPMCNT_Msk))|\
(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
(u32Condition) |\
((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \
(((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\
1. Correct typo. 2. Fix spi/qspi/uspi TX/RX PDMA trigger issue. 3. Drain RX FIFO to remove remain FEF frames in FIFO. 4. Implement RT_DEVICE_CTRL_CLOSE in uart/uuart/scuart driver.
2020-08-03 12:15:33 +08:00
EADC_CMP_ADCMPEN_Msk)))
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
/**
* @brief Enable the compare window mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are 0 and 2.
* @return None
* @details ADCMPF0 (EADC_STATUS2[4]) will be set when both EADC_CMP0 and EADC_CMP1 compared condition matched.
* \hideinitializer
*/
#define EADC_ENABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_CMPWEN_Msk)
/**
* @brief Disable the compare window mode.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are 0 and 2.
* @return None
* @details ADCMPF2 (EADC_STATUS2[6]) will be set when both EADC_CMP2 and EADC_CMP3 compared condition matched.
* \hideinitializer
*/
#define EADC_DISABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_CMPWEN_Msk)
/**
* @brief Enable the compare interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3.
* @return None
* @details If the compare function is enabled and the compare condition matches the setting of CMPCOND (EADC_CMPn[2], n=0~3)
* and CMPMCNT (EADC_CMPn[11:8], n=0~3), ADCMPFn (EADC_STATUS2[7:4], n=0~3) will be asserted, in the meanwhile,
* if ADCMPIE is set to 1, a compare interrupt request is generated.
* \hideinitializer
*/
#define EADC_ENABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_ADCMPIE_Msk)
/**
* @brief Disable the compare interrupt.
* @param[in] eadc The pointer of the specified EADC module.
* @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3.
* @return None
* @details This macro is used to disable the compare interrupt.
* \hideinitializer
*/
#define EADC_DISABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_ADCMPIE_Msk)
/**
* @brief Disable comparator 0.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 0.
* \hideinitializer
*/
#define EADC_DISABLE_CMP0(eadc) ((eadc)->CMP[0] = 0)
/**
* @brief Disable comparator 1.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 1.
* \hideinitializer
*/
#define EADC_DISABLE_CMP1(eadc) ((eadc)->CMP[1] = 0)
/**
* @brief Disable comparator 2.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 2.
* \hideinitializer
*/
#define EADC_DISABLE_CMP2(eadc) ((eadc)->CMP[2] = 0)
/**
* @brief Disable comparator 3.
* @param[in] eadc The pointer of the specified EADC module.
* @return None
* @details This macro is used to disable comparator 3.
* \hideinitializer
*/
#define EADC_DISABLE_CMP3(eadc) ((eadc)->CMP[3] = 0)
/*---------------------------------------------------------------------------------------------------------*/
/* Define EADC functions prototype */
/*---------------------------------------------------------------------------------------------------------*/
void EADC_Open(EADC_T *eadc, uint32_t u32InputMode);
void EADC_Close(EADC_T *eadc);
void EADC_ConfigSampleModule(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerSrc, uint32_t u32Channel);
void EADC_SetTriggerDelayTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerDelayTime, uint32_t u32DelayClockDivider);
void EADC_SetExtendSampleTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32ExtendSampleTime);
/*@}*/ /* end of group EADC_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group EADC_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_EADC_H__ */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/