rt-thread-official/bsp/nuvoton/libraries/m460/StdDriver/inc/nu_sc.h

336 lines
14 KiB
C
Raw Normal View History

/**************************************************************************//**
* @file nu_sc.h
* @version V3.00
* @brief Smartcard(SC) driver header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_SC_H__
#define __NU_SC_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup SC_Driver SC Driver
@{
*/
/** @addtogroup SC_EXPORTED_CONSTANTS SC Exported Constants
@{
*/
#define SC_INTERFACE_NUM (3UL) /*!< Smartcard interface numbers \hideinitializer */
#define SC_PIN_STATE_HIGH (1UL) /*!< Smartcard pin status high \hideinitializer */
#define SC_PIN_STATE_LOW (0UL) /*!< Smartcard pin status low \hideinitializer */
#define SC_PIN_STATE_IGNORE (0xFFFFFFFFUL) /*!< Ignore pin status \hideinitializer */
#define SC_CLK_ON (1UL) /*!< Smartcard clock on \hideinitializer */
#define SC_CLK_OFF (0UL) /*!< Smartcard clock off \hideinitializer */
#define SC_TMR_MODE_0 (0UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 0, down count \hideinitializer */
#define SC_TMR_MODE_1 (1UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 1, down count, start after detect start bit \hideinitializer */
#define SC_TMR_MODE_2 (2UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 2, down count, start after receive start bit \hideinitializer */
#define SC_TMR_MODE_3 (3UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 3, down count, use for activation, only timer 0 support this mode \hideinitializer */
#define SC_TMR_MODE_4 (4UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 4, down count with reload after timeout \hideinitializer */
#define SC_TMR_MODE_5 (5UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 5, down count, start after detect start bit, reload after timeout \hideinitializer */
#define SC_TMR_MODE_6 (6UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 6, down count, start after receive start bit, reload after timeout \hideinitializer */
#define SC_TMR_MODE_7 (7UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 7, down count, start and reload after detect start bit \hideinitializer */
#define SC_TMR_MODE_8 (8UL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 8, up count \hideinitializer */
#define SC_TMR_MODE_F (0xFUL << SC_TMRCTL0_OPMODE_Pos) /*!<Timer Operation Mode 15, down count, reload after detect start bit \hideinitializer */
#define SC_TIMEOUT (SystemCoreClock) /*!< 1 second time-out */
/**@}*/ /* end of group SC_EXPORTED_CONSTANTS */
/** @addtogroup SC_EXPORTED_FUNCTIONS SC Exported Functions
@{
*/
/**
* @brief This macro enable smartcard interrupt
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Mask Interrupt mask to be enabled. A combination of
* - \ref SC_INTEN_ACERRIEN_Msk
* - \ref SC_INTEN_RXTOIEN_Msk
* - \ref SC_INTEN_INITIEN_Msk
* - \ref SC_INTEN_CDIEN_Msk
* - \ref SC_INTEN_BGTIEN_Msk
* - \ref SC_INTEN_TMR2IEN_Msk
* - \ref SC_INTEN_TMR1IEN_Msk
* - \ref SC_INTEN_TMR0IEN_Msk
* - \ref SC_INTEN_TERRIEN_Msk
* - \ref SC_INTEN_TBEIEN_Msk
* - \ref SC_INTEN_RDAIEN_Msk
*
* @return None
*
* @details The macro is used to enable Auto-convention error interrupt, Receiver buffer time-out interrupt, Initial end interrupt,
* Card detect interrupt, Block guard time interrupt, Timer2 interrupt, Timer1 interrupt, Timer0 interrupt,
* Transfer error interrupt, Transmit buffer empty interrupt or Receive data reach trigger level interrupt.
* \hideinitializer
*/
#define SC_ENABLE_INT(sc, u32Mask) ((sc)->INTEN |= (u32Mask))
/**
* @brief This macro disable smartcard interrupt
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Mask Interrupt mask to be disabled. A combination of
* - \ref SC_INTEN_ACERRIEN_Msk
* - \ref SC_INTEN_RXTOIEN_Msk
* - \ref SC_INTEN_INITIEN_Msk
* - \ref SC_INTEN_CDIEN_Msk
* - \ref SC_INTEN_BGTIEN_Msk
* - \ref SC_INTEN_TMR2IEN_Msk
* - \ref SC_INTEN_TMR1IEN_Msk
* - \ref SC_INTEN_TMR0IEN_Msk
* - \ref SC_INTEN_TERRIEN_Msk
* - \ref SC_INTEN_TBEIEN_Msk
* - \ref SC_INTEN_RDAIEN_Msk
*
* @return None
*
* @details The macro is used to disable Auto-convention error interrupt, Receiver buffer time-out interrupt, Initial end interrupt,
* Card detect interrupt, Block guard time interrupt, Timer2 interrupt, Timer1 interrupt, Timer0 interrupt,
* Transfer error interrupt, Transmit buffer empty interrupt or Receive data reach trigger level interrupt.
* \hideinitializer
*/
#define SC_DISABLE_INT(sc, u32Mask) ((sc)->INTEN &= ~(u32Mask))
/**
* @brief This macro set VCC pin state of smartcard interface
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32State Pin state of VCC pin, valid parameters are \ref SC_PIN_STATE_HIGH and \ref SC_PIN_STATE_LOW.
*
* @return None
*
* @details User can set PWREN (SC_PINCTL[0]) and PWRINV (SC_PINCTL[11]) to decide SC_PWR pin is in high or low level.
* \hideinitializer
*/
#define SC_SET_VCC_PIN(sc, u32State) \
do {\
uint32_t u32TimeOutCount = SC_TIMEOUT;\
while(((sc)->PINCTL & SC_PINCTL_SYNC_Msk) == SC_PINCTL_SYNC_Msk)\
if(--u32TimeOutCount == 0) break;\
if(u32State)\
(sc)->PINCTL |= SC_PINCTL_PWREN_Msk;\
else\
(sc)->PINCTL &= ~SC_PINCTL_PWREN_Msk;\
}while(0)
/**
* @brief This macro turns CLK output on or off
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32OnOff Clock on or off for selected smartcard module, valid values are \ref SC_CLK_ON and \ref SC_CLK_OFF.
*
* @return None
*
* @details User can set CLKKEEP (SC_PINCTL[6]) to decide SC_CLK pin always keeps free running or not.
* \hideinitializer
*/
#define SC_SET_CLK_PIN(sc, u32OnOff)\
do {\
uint32_t u32TimeOutCount = SC_TIMEOUT;\
while(((sc)->PINCTL & SC_PINCTL_SYNC_Msk) == SC_PINCTL_SYNC_Msk)\
if(--u32TimeOutCount == 0) break;\
if(u32OnOff)\
(sc)->PINCTL |= SC_PINCTL_CLKKEEP_Msk;\
else\
(sc)->PINCTL &= ~(SC_PINCTL_CLKKEEP_Msk);\
}while(0)
/**
* @brief This macro set I/O pin state of smartcard interface
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32State Pin state of I/O pin, valid parameters are \ref SC_PIN_STATE_HIGH and \ref SC_PIN_STATE_LOW.
*
* @return None
*
* @details User can set SCDATA (SC_PINCTL[9]) to decide SC_DATA pin to high or low.
* \hideinitializer
*/
#define SC_SET_IO_PIN(sc, u32State)\
do {\
uint32_t u32TimeOutCount = SC_TIMEOUT;\
while(((sc)->PINCTL & SC_PINCTL_SYNC_Msk) == SC_PINCTL_SYNC_Msk)\
if(--u32TimeOutCount == 0) break;\
if(u32State)\
(sc)->PINCTL |= SC_PINCTL_SCDATA_Msk;\
else\
(sc)->PINCTL &= ~SC_PINCTL_SCDATA_Msk;\
}while(0)
/**
* @brief This macro set RST pin state of smartcard interface
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32State Pin state of RST pin, valid parameters are \ref SC_PIN_STATE_HIGH and \ref SC_PIN_STATE_LOW.
*
* @return None
*
* @details User can set SCRST (SC_PINCTL[1]) to decide SC_RST pin to high or low.
* \hideinitializer
*/
#define SC_SET_RST_PIN(sc, u32State)\
do {\
uint32_t u32TimeOutCount = SC_TIMEOUT;\
while(((sc)->PINCTL & SC_PINCTL_SYNC_Msk) == SC_PINCTL_SYNC_Msk)\
if(--u32TimeOutCount == 0) break;\
if(u32State)\
(sc)->PINCTL |= SC_PINCTL_RSTEN_Msk;\
else\
(sc)->PINCTL &= ~SC_PINCTL_RSTEN_Msk;\
}while(0)
/**
* @brief This macro read one byte from smartcard module receive FIFO
*
* @param[in] sc The pointer of smartcard module.
*
* @return One byte read from receive FIFO
*
* @details By reading DAT register, the SC will return an 8-bit received data.
* \hideinitializer
*/
#define SC_READ(sc) ((char)((sc)->DAT))
/**
* @brief This macro write one byte to smartcard module transmit FIFO
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u8Data Data to write to transmit FIFO.
*
* @return None
*
* @details By writing data to DAT register, the SC will send out an 8-bit data.
* \hideinitializer
*/
#define SC_WRITE(sc, u8Data) ((sc)->DAT = (u8Data))
/**
* @brief This macro set smartcard stop bit length
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Len Stop bit length, ether 1 or 2.
*
* @return None
*
* @details Stop bit length must be 1 for T = 1 protocol and 2 for T = 0 protocol.
* \hideinitializer
*/
#define SC_SET_STOP_BIT_LEN(sc, u32Len) ((sc)->CTL = ((sc)->CTL & ~SC_CTL_NSB_Msk) | (((u32Len) == 1)? SC_CTL_NSB_Msk : 0))
/*---------------------------------------------------------------------------------------------------------*/
/* static inline functions */
/*---------------------------------------------------------------------------------------------------------*/
/* Declare these inline functions here to avoid MISRA C 2004 rule 8.1 error */
__STATIC_INLINE void SC_SetTxRetry(SC_T *sc, uint32_t u32Count);
__STATIC_INLINE void SC_SetRxRetry(SC_T *sc, uint32_t u32Count);
/**
* @brief Enable/Disable Tx error retry, and set Tx error retry count
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Count The number of times of Tx error retry count, between 0~8. 0 means disable Tx error retry.
*
* @return None
*
* @details This function is used to enable/disable transmitter retry function when parity error has occurred, and set error retry count.
*/
__STATIC_INLINE void SC_SetTxRetry(SC_T *sc, uint32_t u32Count)
{
uint32_t u32TimeOutCount = 0;
u32TimeOutCount = SC_TIMEOUT;
while (((sc)->CTL & SC_CTL_SYNC_Msk) == SC_CTL_SYNC_Msk)
{
if (--u32TimeOutCount == 0) break;
}
/* Retry count must set while enable bit disabled, so disable it first */
(sc)->CTL &= ~(SC_CTL_TXRTY_Msk | SC_CTL_TXRTYEN_Msk);
if ((u32Count) != 0UL)
{
u32TimeOutCount = SC_TIMEOUT;
while (((sc)->CTL & SC_CTL_SYNC_Msk) == SC_CTL_SYNC_Msk)
{
if (--u32TimeOutCount == 0) break;
}
(sc)->CTL |= (((u32Count) - 1UL) << SC_CTL_TXRTY_Pos) | SC_CTL_TXRTYEN_Msk;
}
}
/**
* @brief Enable/Disable Rx error retry, and set Rx error retry count
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Count The number of times of Rx error retry count, between 0~8. 0 means disable Rx error retry.
*
* @return None
*
* @details This function is used to enable/disable receiver retry function when parity error has occurred, and set error retry count.
*/
__STATIC_INLINE void SC_SetRxRetry(SC_T *sc, uint32_t u32Count)
{
uint32_t u32TimeOutCount = 0;
u32TimeOutCount = SC_TIMEOUT;
while (((sc)->CTL & SC_CTL_SYNC_Msk) == SC_CTL_SYNC_Msk)
{
if (--u32TimeOutCount == 0) break;
}
/* Retry count must set while enable bit disabled, so disable it first */
(sc)->CTL &= ~(SC_CTL_RXRTY_Msk | SC_CTL_RXRTYEN_Msk);
if ((u32Count) != 0UL)
{
u32TimeOutCount = SC_TIMEOUT;
while (((sc)->CTL & SC_CTL_SYNC_Msk) == SC_CTL_SYNC_Msk)
{
if (--u32TimeOutCount == 0) break;
}
(sc)->CTL |= (((u32Count) - 1UL) << SC_CTL_RXRTY_Pos) | SC_CTL_RXRTYEN_Msk;
}
}
uint32_t SC_IsCardInserted(SC_T *sc);
void SC_ClearFIFO(SC_T *sc);
void SC_Close(SC_T *sc);
void SC_Open(SC_T *sc, uint32_t u32CardDet, uint32_t u32PWR);
void SC_ResetReader(SC_T *sc);
void SC_SetBlockGuardTime(SC_T *sc, uint32_t u32BGT);
void SC_SetCharGuardTime(SC_T *sc, uint32_t u32CGT);
void SC_StopAllTimer(SC_T *sc);
void SC_StartTimer(SC_T *sc, uint32_t u32TimerNum, uint32_t u32Mode, uint32_t u32ETUCount);
void SC_StopTimer(SC_T *sc, uint32_t u32TimerNum);
uint32_t SC_GetInterfaceClock(SC_T *sc);
/**@}*/ /* end of group SC_EXPORTED_FUNCTIONS */
/**@}*/ /* end of group SC_Driver */
/**@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_SC_H__ */