rt-thread-official/bsp/nuvoton/libraries/m460/StdDriver/inc/nu_otg.h

267 lines
10 KiB
C
Raw Normal View History

/**************************************************************************//**
* @file nu_otg.h
* @version V3.00
* @brief M460 series OTG driver header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
****************************************************************************/
#ifndef __NU_OTG_H__
#define __NU_OTG_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup OTG_Driver OTG Driver
@{
*/
/** @addtogroup OTG_EXPORTED_CONSTANTS OTG Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* OTG constant definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define OTG_VBUS_EN_ACTIVE_HIGH (0UL) /*!< USB VBUS power switch enable signal is active high. \hideinitializer */
#define OTG_VBUS_EN_ACTIVE_LOW (1UL) /*!< USB VBUS power switch enable signal is active low. \hideinitializer */
#define OTG_VBUS_ST_VALID_HIGH (0UL) /*!< USB VBUS power switch valid status is high. \hideinitializer */
#define OTG_VBUS_ST_VALID_LOW (1UL) /*!< USB VBUS power switch valid status is low. \hideinitializer */
/*@}*/ /* end of group OTG_EXPORTED_CONSTANTS */
/** @addtogroup OTG_EXPORTED_FUNCTIONS OTG Exported Functions
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* Define Macros and functions */
/*---------------------------------------------------------------------------------------------------------*/
/**
* @brief This macro is used to enable OTG function
* @param None
* @return None
* @details This macro will set OTGEN bit of OTG_CTL register to enable OTG function.
* \hideinitializer
*/
#define OTG_ENABLE() (OTG->CTL |= OTG_CTL_OTGEN_Msk)
/**
* @brief This macro is used to disable OTG function
* @param None
* @return None
* @details This macro will clear OTGEN bit of OTG_CTL register to disable OTG function.
* \hideinitializer
*/
#define OTG_DISABLE() (OTG->CTL &= ~OTG_CTL_OTGEN_Msk)
/**
* @brief This macro is used to enable USB PHY
* @param None
* @return None
* @details When the USB role is selected as OTG device, use this macro to enable USB PHY.
* This macro will set OTGPHYEN bit of OTG_PHYCTL register to enable USB PHY.
* \hideinitializer
*/
#define OTG_ENABLE_PHY() (OTG->PHYCTL |= OTG_PHYCTL_OTGPHYEN_Msk)
/**
* @brief This macro is used to disable USB PHY
* @param None
* @return None
* @details This macro will clear OTGPHYEN bit of OTG_PHYCTL register to disable USB PHY.
* \hideinitializer
*/
#define OTG_DISABLE_PHY() (OTG->PHYCTL &= ~OTG_PHYCTL_OTGPHYEN_Msk)
/**
* @brief This macro is used to enable ID detection function
* @param None
* @return None
* @details This macro will set IDDETEN bit of OTG_PHYCTL register to enable ID detection function.
* \hideinitializer
*/
#define OTG_ENABLE_ID_DETECT() (OTG->PHYCTL |= OTG_PHYCTL_IDDETEN_Msk)
/**
* @brief This macro is used to disable ID detection function
* @param None
* @return None
* @details This macro will clear IDDETEN bit of OTG_PHYCTL register to disable ID detection function.
* \hideinitializer
*/
#define OTG_DISABLE_ID_DETECT() (OTG->PHYCTL &= ~OTG_PHYCTL_IDDETEN_Msk)
/**
* @brief This macro is used to enable OTG wake-up function
* @param None
* @return None
* @details This macro will set WKEN bit of OTG_CTL register to enable OTG wake-up function.
* \hideinitializer
*/
#define OTG_ENABLE_WAKEUP() (OTG->CTL |= OTG_CTL_WKEN_Msk)
/**
* @brief This macro is used to disable OTG wake-up function
* @param None
* @return None
* @details This macro will clear WKEN bit of OTG_CTL register to disable OTG wake-up function.
* \hideinitializer
*/
#define OTG_DISABLE_WAKEUP() (OTG->CTL &= ~OTG_CTL_WKEN_Msk)
/**
* @brief This macro is used to set the polarity of USB_VBUS_EN pin
* @param[in] u32Pol The polarity selection. Valid values are listed below.
* - \ref OTG_VBUS_EN_ACTIVE_HIGH
* - \ref OTG_VBUS_EN_ACTIVE_LOW
* @return None
* @details This macro is used to set the polarity of external USB VBUS power switch enable signal.
* \hideinitializer
*/
#define OTG_SET_VBUS_EN_POL(u32Pol) (OTG->PHYCTL = (OTG->PHYCTL & (~OTG_PHYCTL_VBENPOL_Msk)) | ((u32Pol) << OTG_PHYCTL_VBENPOL_Pos))
/**
* @brief This macro is used to set the polarity of USB_VBUS_ST pin
* @param[in] u32Pol The polarity selection. Valid values are listed below.
* - \ref OTG_VBUS_ST_VALID_HIGH
* - \ref OTG_VBUS_ST_VALID_LOW
* @return None
* @details This macro is used to set the polarity of external USB VBUS power switch status signal.
* \hideinitializer
*/
#define OTG_SET_VBUS_STS_POL(u32Pol) (OTG->PHYCTL = (OTG->PHYCTL & (~OTG_PHYCTL_VBSTSPOL_Msk)) | ((u32Pol) << OTG_PHYCTL_VBSTSPOL_Pos))
/**
* @brief This macro is used to enable OTG related interrupts
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref OTG_INTEN_ROLECHGIEN_Msk
* - \ref OTG_INTEN_VBEIEN_Msk
* - \ref OTG_INTEN_SRPFIEN_Msk
* - \ref OTG_INTEN_HNPFIEN_Msk
* - \ref OTG_INTEN_GOIDLEIEN_Msk
* - \ref OTG_INTEN_IDCHGIEN_Msk
* - \ref OTG_INTEN_PDEVIEN_Msk
* - \ref OTG_INTEN_HOSTIEN_Msk
* - \ref OTG_INTEN_BVLDCHGIEN_Msk
* - \ref OTG_INTEN_AVLDCHGIEN_Msk
* - \ref OTG_INTEN_VBCHGIEN_Msk
* - \ref OTG_INTEN_SECHGIEN_Msk
* - \ref OTG_INTEN_SRPDETIEN_Msk
* @return None
* @details This macro will enable OTG related interrupts specified by u32Mask parameter.
* \hideinitializer
*/
#define OTG_ENABLE_INT(u32Mask) (OTG->INTEN |= (u32Mask))
/**
* @brief This macro is used to disable OTG related interrupts
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref OTG_INTEN_ROLECHGIEN_Msk
* - \ref OTG_INTEN_VBEIEN_Msk
* - \ref OTG_INTEN_SRPFIEN_Msk
* - \ref OTG_INTEN_HNPFIEN_Msk
* - \ref OTG_INTEN_GOIDLEIEN_Msk
* - \ref OTG_INTEN_IDCHGIEN_Msk
* - \ref OTG_INTEN_PDEVIEN_Msk
* - \ref OTG_INTEN_HOSTIEN_Msk
* - \ref OTG_INTEN_BVLDCHGIEN_Msk
* - \ref OTG_INTEN_AVLDCHGIEN_Msk
* - \ref OTG_INTEN_VBCHGIEN_Msk
* - \ref OTG_INTEN_SECHGIEN_Msk
* - \ref OTG_INTEN_SRPDETIEN_Msk
* @return None
* @details This macro will disable OTG related interrupts specified by u32Mask parameter.
* \hideinitializer
*/
#define OTG_DISABLE_INT(u32Mask) (OTG->INTEN &= ~(u32Mask))
/**
* @brief This macro is used to get OTG related interrupt flags
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref OTG_INTSTS_ROLECHGIF_Msk
* - \ref OTG_INTSTS_VBEIF_Msk
* - \ref OTG_INTSTS_SRPFIF_Msk
* - \ref OTG_INTSTS_HNPFIF_Msk
* - \ref OTG_INTSTS_GOIDLEIF_Msk
* - \ref OTG_INTSTS_IDCHGIF_Msk
* - \ref OTG_INTSTS_PDEVIF_Msk
* - \ref OTG_INTSTS_HOSTIF_Msk
* - \ref OTG_INTSTS_BVLDCHGIF_Msk
* - \ref OTG_INTSTS_AVLDCHGIF_Msk
* - \ref OTG_INTSTS_VBCHGIF_Msk
* - \ref OTG_INTSTS_SECHGIF_Msk
* - \ref OTG_INTSTS_SRPDETIF_Msk
* @return Interrupt flags of selected sources.
* @details This macro will return OTG related interrupt flags specified by u32Mask parameter.
* \hideinitializer
*/
#define OTG_GET_INT_FLAG(u32Mask) (OTG->INTSTS & (u32Mask))
/**
* @brief This macro is used to clear OTG related interrupt flags
* @param[in] u32Mask The combination of interrupt source. Each bit corresponds to a interrupt source. Valid values are listed below.
* - \ref OTG_INTSTS_ROLECHGIF_Msk
* - \ref OTG_INTSTS_VBEIF_Msk
* - \ref OTG_INTSTS_SRPFIF_Msk
* - \ref OTG_INTSTS_HNPFIF_Msk
* - \ref OTG_INTSTS_GOIDLEIF_Msk
* - \ref OTG_INTSTS_IDCHGIF_Msk
* - \ref OTG_INTSTS_PDEVIF_Msk
* - \ref OTG_INTSTS_HOSTIF_Msk
* - \ref OTG_INTSTS_BVLDCHGIF_Msk
* - \ref OTG_INTSTS_AVLDCHGIF_Msk
* - \ref OTG_INTSTS_VBCHGIF_Msk
* - \ref OTG_INTSTS_SECHGIF_Msk
* - \ref OTG_INTSTS_SRPDETIF_Msk
* @return None
* @details This macro will clear OTG related interrupt flags specified by u32Mask parameter.
* \hideinitializer
*/
#define OTG_CLR_INT_FLAG(u32Mask) (OTG->INTSTS = (u32Mask))
/**
* @brief This macro is used to get OTG related status
* @param[in] u32Mask The combination of user specified source. Valid values are listed below.
* - \ref OTG_STATUS_OVERCUR_Msk
* - \ref OTG_STATUS_IDSTS_Msk
* - \ref OTG_STATUS_SESSEND_Msk
* - \ref OTG_STATUS_BVLD_Msk
* - \ref OTG_STATUS_AVLD_Msk
* - \ref OTG_STATUS_VBUSVLD_Msk
* - \ref OTG_STATUS_ASPERI_Msk
* - \ref OTG_STATUS_ASHOST_Msk
* @return The user specified status.
* @details This macro will return OTG related status specified by u32Mask parameter.
* \hideinitializer
*/
#define OTG_GET_STATUS(u32Mask) (OTG->STATUS & (u32Mask))
/*@}*/ /* end of group OTG_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group OTG_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /*__NU_OTG_H__ */