libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imxrt1052-evk/Libraries/drivers/fsl_flexio_uart.h

583 lines
23 KiB
C
Raw Normal View History

[bsp] add i.mx rt 1052 support
2017-10-26 15:39:32 +08:00
/*
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_FLEXIO_UART_H_
#define _FSL_FLEXIO_UART_H_
#include "fsl_common.h"
#include "fsl_flexio.h"
/*!
* @addtogroup flexio_uart
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief FlexIO UART driver version 2.1.2. */
#define FSL_FLEXIO_UART_DRIVER_VERSION (MAKE_VERSION(2, 1, 2))
/*@}*/
/*! @brief Error codes for the UART driver. */
enum _flexio_uart_status
{
kStatus_FLEXIO_UART_TxBusy = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 0), /*!< Transmitter is busy. */
kStatus_FLEXIO_UART_RxBusy = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 1), /*!< Receiver is busy. */
kStatus_FLEXIO_UART_TxIdle = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 2), /*!< UART transmitter is idle. */
kStatus_FLEXIO_UART_RxIdle = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 3), /*!< UART receiver is idle. */
kStatus_FLEXIO_UART_ERROR = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 4), /*!< ERROR happens on UART. */
kStatus_FLEXIO_UART_RxRingBufferOverrun =
MAKE_STATUS(kStatusGroup_FLEXIO_UART, 5), /*!< UART RX software ring buffer overrun. */
kStatus_FLEXIO_UART_RxHardwareOverrun = MAKE_STATUS(kStatusGroup_FLEXIO_UART, 6) /*!< UART RX receiver overrun. */
};
/*! @brief FlexIO UART bit count per char. */
typedef enum _flexio_uart_bit_count_per_char
{
kFLEXIO_UART_7BitsPerChar = 7U, /*!< 7-bit data characters */
kFLEXIO_UART_8BitsPerChar = 8U, /*!< 8-bit data characters */
kFLEXIO_UART_9BitsPerChar = 9U, /*!< 9-bit data characters */
} flexio_uart_bit_count_per_char_t;
/*! @brief Define FlexIO UART interrupt mask. */
enum _flexio_uart_interrupt_enable
{
kFLEXIO_UART_TxDataRegEmptyInterruptEnable = 0x1U, /*!< Transmit buffer empty interrupt enable. */
kFLEXIO_UART_RxDataRegFullInterruptEnable = 0x2U, /*!< Receive buffer full interrupt enable. */
};
/*! @brief Define FlexIO UART status mask. */
enum _flexio_uart_status_flags
{
kFLEXIO_UART_TxDataRegEmptyFlag = 0x1U, /*!< Transmit buffer empty flag. */
kFLEXIO_UART_RxDataRegFullFlag = 0x2U, /*!< Receive buffer full flag. */
kFLEXIO_UART_RxOverRunFlag = 0x4U, /*!< Receive buffer over run flag. */
};
/*! @brief Define FlexIO UART access structure typedef. */
typedef struct _flexio_uart_type
{
FLEXIO_Type *flexioBase; /*!< FlexIO base pointer. */
uint8_t TxPinIndex; /*!< Pin select for UART_Tx. */
uint8_t RxPinIndex; /*!< Pin select for UART_Rx. */
uint8_t shifterIndex[2]; /*!< Shifter index used in FlexIO UART. */
uint8_t timerIndex[2]; /*!< Timer index used in FlexIO UART. */
} FLEXIO_UART_Type;
/*! @brief Define FlexIO UART user configuration structure. */
typedef struct _flexio_uart_config
{
bool enableUart; /*!< Enable/disable FlexIO UART TX & RX. */
bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode*/
bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode*/
bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers,
fast access requires the FlexIO clock to be at least
twice the frequency of the bus clock. */
uint32_t baudRate_Bps; /*!< Baud rate in Bps. */
flexio_uart_bit_count_per_char_t bitCountPerChar; /*!< number of bits, 7/8/9 -bit */
} flexio_uart_config_t;
/*! @brief Define FlexIO UART transfer structure. */
typedef struct _flexio_uart_transfer
{
uint8_t *data; /*!< Transfer buffer*/
size_t dataSize; /*!< Transfer size*/
} flexio_uart_transfer_t;
/* Forward declaration of the handle typedef. */
typedef struct _flexio_uart_handle flexio_uart_handle_t;
/*! @brief FlexIO UART transfer callback function. */
typedef void (*flexio_uart_transfer_callback_t)(FLEXIO_UART_Type *base,
flexio_uart_handle_t *handle,
status_t status,
void *userData);
/*! @brief Define FLEXIO UART handle structure*/
struct _flexio_uart_handle
{
uint8_t *volatile txData; /*!< Address of remaining data to send. */
volatile size_t txDataSize; /*!< Size of the remaining data to send. */
uint8_t *volatile rxData; /*!< Address of remaining data to receive. */
volatile size_t rxDataSize; /*!< Size of the remaining data to receive. */
size_t txDataSizeAll; /*!< Total bytes to be sent. */
size_t rxDataSizeAll; /*!< Total bytes to be received. */
uint8_t *rxRingBuffer; /*!< Start address of the receiver ring buffer. */
size_t rxRingBufferSize; /*!< Size of the ring buffer. */
volatile uint16_t rxRingBufferHead; /*!< Index for the driver to store received data into ring buffer. */
volatile uint16_t rxRingBufferTail; /*!< Index for the user to get data from the ring buffer. */
flexio_uart_transfer_callback_t callback; /*!< Callback function. */
void *userData; /*!< UART callback function parameter.*/
volatile uint8_t txState; /*!< TX transfer state. */
volatile uint8_t rxState; /*!< RX transfer state */
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Ungates the FlexIO clock, resets the FlexIO module, configures FlexIO UART
* hardware, and configures the FlexIO UART with FlexIO UART configuration.
* The configuration structure can be filled by the user or be set with
* default values by FLEXIO_UART_GetDefaultConfig().
*
* Example
@code
FLEXIO_UART_Type base = {
.flexioBase = FLEXIO,
.TxPinIndex = 0,
.RxPinIndex = 1,
.shifterIndex = {0,1},
.timerIndex = {0,1}
};
flexio_uart_config_t config = {
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.baudRate_Bps = 115200U,
.bitCountPerChar = 8
};
FLEXIO_UART_Init(base, &config, srcClock_Hz);
@endcode
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param userConfig Pointer to the flexio_uart_config_t structure.
* @param srcClock_Hz FlexIO source clock in Hz.
* @retval kStatus_Success Configuration success
* @retval kStatus_InvalidArgument Buadrate configuration out of range
*/
status_t FLEXIO_UART_Init(FLEXIO_UART_Type *base, const flexio_uart_config_t *userConfig, uint32_t srcClock_Hz);
/*!
* @brief Resets the FlexIO UART shifter and timer config.
*
* @note After calling this API, call the FLEXO_UART_Init to use the FlexIO UART module.
*
* @param base Pointer to FLEXIO_UART_Type structure
*/
void FLEXIO_UART_Deinit(FLEXIO_UART_Type *base);
/*!
* @brief Gets the default configuration to configure the FlexIO UART. The configuration
* can be used directly for calling the FLEXIO_UART_Init().
* Example:
@code
flexio_uart_config_t config;
FLEXIO_UART_GetDefaultConfig(&userConfig);
@endcode
* @param userConfig Pointer to the flexio_uart_config_t structure.
*/
void FLEXIO_UART_GetDefaultConfig(flexio_uart_config_t *userConfig);
/* @} */
/*!
* @name Status
* @{
*/
/*!
* @brief Gets the FlexIO UART status flags.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @return FlexIO UART status flags.
*/
uint32_t FLEXIO_UART_GetStatusFlags(FLEXIO_UART_Type *base);
/*!
* @brief Gets the FlexIO UART status flags.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param mask Status flag.
* The parameter can be any combination of the following values:
* @arg kFLEXIO_UART_TxDataRegEmptyFlag
* @arg kFLEXIO_UART_RxEmptyFlag
* @arg kFLEXIO_UART_RxOverRunFlag
*/
void FLEXIO_UART_ClearStatusFlags(FLEXIO_UART_Type *base, uint32_t mask);
/* @} */
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the FlexIO UART interrupt.
*
* This function enables the FlexIO UART interrupt.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param mask Interrupt source.
*/
void FLEXIO_UART_EnableInterrupts(FLEXIO_UART_Type *base, uint32_t mask);
/*!
* @brief Disables the FlexIO UART interrupt.
*
* This function disables the FlexIO UART interrupt.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param mask Interrupt source.
*/
void FLEXIO_UART_DisableInterrupts(FLEXIO_UART_Type *base, uint32_t mask);
/* @} */
/*!
* @name DMA Control
* @{
*/
/*!
* @brief Gets the FlexIO UARt transmit data register address.
*
* This function returns the UART data register address, which is mainly used by DMA/eDMA.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @return FlexIO UART transmit data register address.
*/
static inline uint32_t FLEXIO_UART_GetTxDataRegisterAddress(FLEXIO_UART_Type *base)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBuffer, base->shifterIndex[0]);
}
/*!
* @brief Gets the FlexIO UART receive data register address.
*
* This function returns the UART data register address, which is mainly used by DMA/eDMA.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @return FlexIO UART receive data register address.
*/
static inline uint32_t FLEXIO_UART_GetRxDataRegisterAddress(FLEXIO_UART_Type *base)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferByteSwapped, base->shifterIndex[1]);
}
/*!
* @brief Enables/disables the FlexIO UART transmit DMA.
* This function enables/disables the FlexIO UART Tx DMA,
* which means asserting the kFLEXIO_UART_TxDataRegEmptyFlag does/doesn't trigger the DMA request.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param enable True to enable, false to disable.
*/
static inline void FLEXIO_UART_EnableTxDMA(FLEXIO_UART_Type *base, bool enable)
{
FLEXIO_EnableShifterStatusDMA(base->flexioBase, 1 << base->shifterIndex[0], enable);
}
/*!
* @brief Enables/disables the FlexIO UART receive DMA.
* This function enables/disables the FlexIO UART Rx DMA,
* which means asserting kFLEXIO_UART_RxDataRegFullFlag does/doesn't trigger the DMA request.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param enable True to enable, false to disable.
*/
static inline void FLEXIO_UART_EnableRxDMA(FLEXIO_UART_Type *base, bool enable)
{
FLEXIO_EnableShifterStatusDMA(base->flexioBase, 1 << base->shifterIndex[1], enable);
}
/* @} */
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Enables/disables the FlexIO UART module operation.
*
* @param base Pointer to the FLEXIO_UART_Type.
* @param enable True to enable, false does not have any effect.
*/
static inline void FLEXIO_UART_Enable(FLEXIO_UART_Type *base, bool enable)
{
if (enable)
{
base->flexioBase->CTRL |= FLEXIO_CTRL_FLEXEN_MASK;
}
}
/*!
* @brief Writes one byte of data.
*
* @note This is a non-blocking API, which returns directly after the data is put into the
* data register. Ensure that the TxEmptyFlag is asserted before calling
* this API.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param buffer The data bytes to send.
*/
static inline void FLEXIO_UART_WriteByte(FLEXIO_UART_Type *base, const uint8_t *buffer)
{
base->flexioBase->SHIFTBUF[base->shifterIndex[0]] = *buffer;
}
/*!
* @brief Reads one byte of data.
*
* @note This is a non-blocking API, which returns directly after the data is read from the
* data register. Ensure that the RxFullFlag is asserted before calling this API.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param buffer The buffer to store the received bytes.
*/
static inline void FLEXIO_UART_ReadByte(FLEXIO_UART_Type *base, uint8_t *buffer)
{
*buffer = base->flexioBase->SHIFTBUFBYS[base->shifterIndex[1]];
}
/*!
* @brief Sends a buffer of data bytes.
*
* @note This function blocks using the polling method until all bytes have been sent.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param txData The data bytes to send.
* @param txSize The number of data bytes to send.
*/
void FLEXIO_UART_WriteBlocking(FLEXIO_UART_Type *base, const uint8_t *txData, size_t txSize);
/*!
* @brief Receives a buffer of bytes.
*
* @note This function blocks using the polling method until all bytes have been received.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param rxData The buffer to store the received bytes.
* @param rxSize The number of data bytes to be received.
*/
void FLEXIO_UART_ReadBlocking(FLEXIO_UART_Type *base, uint8_t *rxData, size_t rxSize);
/* @} */
/*!
* @name Transactional
* @{
*/
/*!
* @brief Initializes the UART handle.
*
* This function initializes the FlexIO UART handle, which can be used for other FlexIO
* UART transactional APIs. Call this API once to get the
* initialized handle.
*
* The UART driver supports the "background" receiving, which means that users can set up
* a RX ring buffer optionally. Data received is stored into the ring buffer even when
* the user doesn't call the FLEXIO_UART_TransferReceiveNonBlocking() API. If there is already data
* received in the ring buffer, users can get the received data from the ring buffer
* directly. The ring buffer is disabled if passing NULL as @p ringBuffer.
*
* @param base to FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param callback The callback function.
* @param userData The parameter of the callback function.
* @retval kStatus_Success Successfully create the handle.
* @retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
*/
status_t FLEXIO_UART_TransferCreateHandle(FLEXIO_UART_Type *base,
flexio_uart_handle_t *handle,
flexio_uart_transfer_callback_t callback,
void *userData);
/*!
* @brief Sets up the RX ring buffer.
*
* This function sets up the RX ring buffer to a specific UART handle.
*
* When the RX ring buffer is used, data received is stored into the ring buffer even when
* the user doesn't call the UART_ReceiveNonBlocking() API. If there is already data received
* in the ring buffer, users can get the received data from the ring buffer directly.
*
* @note When using the RX ring buffer, one byte is reserved for internal use. In other
* words, if @p ringBufferSize is 32, only 31 bytes are used for saving data.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param ringBuffer Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer.
* @param ringBufferSize Size of the ring buffer.
*/
void FLEXIO_UART_TransferStartRingBuffer(FLEXIO_UART_Type *base,
flexio_uart_handle_t *handle,
uint8_t *ringBuffer,
size_t ringBufferSize);
/*!
* @brief Aborts the background transfer and uninstalls the ring buffer.
*
* This function aborts the background transfer and uninstalls the ring buffer.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
*/
void FLEXIO_UART_TransferStopRingBuffer(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle);
/*!
* @brief Transmits a buffer of data using the interrupt method.
*
* This function sends data using an interrupt method. This is a non-blocking function,
* which returns directly without waiting for all data to be written to the TX register. When
* all data is written to the TX register in ISR, the FlexIO UART driver calls the callback
* function and passes the @ref kStatus_FLEXIO_UART_TxIdle as status parameter.
*
* @note The kStatus_FLEXIO_UART_TxIdle is passed to the upper layer when all data is written
* to the TX register. However, it does not ensure that all data is sent out.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param xfer FlexIO UART transfer structure. See #flexio_uart_transfer_t.
* @retval kStatus_Success Successfully starts the data transmission.
* @retval kStatus_UART_TxBusy Previous transmission still not finished, data not written to the TX register.
*/
status_t FLEXIO_UART_TransferSendNonBlocking(FLEXIO_UART_Type *base,
flexio_uart_handle_t *handle,
flexio_uart_transfer_t *xfer);
/*!
* @brief Aborts the interrupt-driven data transmit.
*
* This function aborts the interrupt-driven data sending. Get the remainBytes to find out
* how many bytes are still not sent out.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
*/
void FLEXIO_UART_TransferAbortSend(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle);
/*!
* @brief Gets the number of bytes sent.
*
* This function gets the number of bytes sent driven by interrupt.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param count Number of bytes sent so far by the non-blocking transaction.
* @retval kStatus_NoTransferInProgress transfer has finished or no transfer in progress.
* @retval kStatus_Success Successfully return the count.
*/
status_t FLEXIO_UART_TransferGetSendCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count);
/*!
* @brief Receives a buffer of data using the interrupt method.
*
* This function receives data using the interrupt method. This is a non-blocking function,
* which returns without waiting for all data to be received.
* If the RX ring buffer is used and not empty, the data in ring buffer is copied and
* the parameter @p receivedBytes shows how many bytes are copied from the ring buffer.
* After copying, if the data in ring buffer is not enough to read, the receive
* request is saved by the UART driver. When new data arrives, the receive request
* is serviced first. When all data is received, the UART driver notifies the upper layer
* through a callback function and passes the status parameter @ref kStatus_UART_RxIdle.
* For example, if the upper layer needs 10 bytes but there are only 5 bytes in the ring buffer,
* the 5 bytes are copied to xfer->data. This function returns with the
* parameter @p receivedBytes set to 5. For the last 5 bytes, newly arrived data is
* saved from the xfer->data[5]. When 5 bytes are received, the UART driver notifies upper layer.
* If the RX ring buffer is not enabled, this function enables the RX and RX interrupt
* to receive data to xfer->data. When all data is received, the upper layer is notified.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param xfer UART transfer structure. See #flexio_uart_transfer_t.
* @param receivedBytes Bytes received from the ring buffer directly.
* @retval kStatus_Success Successfully queue the transfer into the transmit queue.
* @retval kStatus_FLEXIO_UART_RxBusy Previous receive request is not finished.
*/
status_t FLEXIO_UART_TransferReceiveNonBlocking(FLEXIO_UART_Type *base,
flexio_uart_handle_t *handle,
flexio_uart_transfer_t *xfer,
size_t *receivedBytes);
/*!
* @brief Aborts the receive data which was using IRQ.
*
* This function aborts the receive data which was using IRQ.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
*/
void FLEXIO_UART_TransferAbortReceive(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle);
/*!
* @brief Gets the number of bytes received.
*
* This function gets the number of bytes received driven by interrupt.
*
* @param base Pointer to the FLEXIO_UART_Type structure.
* @param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
* @param count Number of bytes received so far by the non-blocking transaction.
* @retval kStatus_NoTransferInProgress transfer has finished or no transfer in progress.
* @retval kStatus_Success Successfully return the count.
*/
status_t FLEXIO_UART_TransferGetReceiveCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count);
/*!
* @brief FlexIO UART IRQ handler function.
*
* This function processes the FlexIO UART transmit and receives the IRQ request.
*
* @param uartType Pointer to the FLEXIO_UART_Type structure.
* @param uartHandle Pointer to the flexio_uart_handle_t structure to store the transfer state.
*/
void FLEXIO_UART_TransferHandleIRQ(void *uartType, void *uartHandle);
/*@}*/
#if defined(__cplusplus)
}
#endif /*_cplusplus*/
/*@}*/
#endif /*_FSL_FLEXIO_UART_H_*/