libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imxrt/libraries/MIMXRT1050/MIMXRT1052/drivers/fsl_flexio_spi.h

682 lines
25 KiB
C
Raw Normal View History

[BSP] Add i.MXRT libraires.
2018-09-20 23:18:14 +08:00
/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
[bsp/nxp] add new imxrt series
2019-06-12 15:01:12 +08:00
* SPDX-License-Identifier: BSD-3-Clause
[BSP] Add i.MXRT libraires.
2018-09-20 23:18:14 +08:00
*/
#ifndef _FSL_FLEXIO_SPI_H_
#define _FSL_FLEXIO_SPI_H_
#include "fsl_common.h"
#include "fsl_flexio.h"
/*!
* @addtogroup flexio_spi
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief FlexIO SPI driver version 2.1.3. */
#define FSL_FLEXIO_SPI_DRIVER_VERSION (MAKE_VERSION(2, 1, 3))
/*@}*/
#ifndef FLEXIO_SPI_DUMMYDATA
/*! @brief FlexIO SPI dummy transfer data, the data is sent while txData is NULL. */
#define FLEXIO_SPI_DUMMYDATA (0xFFFFU)
#endif
/*! @brief Error codes for the FlexIO SPI driver. */
enum _flexio_spi_status
{
kStatus_FLEXIO_SPI_Busy = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 1), /*!< FlexIO SPI is busy. */
kStatus_FLEXIO_SPI_Idle = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 2), /*!< SPI is idle */
kStatus_FLEXIO_SPI_Error = MAKE_STATUS(kStatusGroup_FLEXIO_SPI, 3), /*!< FlexIO SPI error. */
};
/*! @brief FlexIO SPI clock phase configuration. */
typedef enum _flexio_spi_clock_phase
{
kFLEXIO_SPI_ClockPhaseFirstEdge = 0x0U, /*!< First edge on SPSCK occurs at the middle of the first
* cycle of a data transfer. */
kFLEXIO_SPI_ClockPhaseSecondEdge = 0x1U, /*!< First edge on SPSCK occurs at the start of the
* first cycle of a data transfer. */
} flexio_spi_clock_phase_t;
/*! @brief FlexIO SPI data shifter direction options. */
typedef enum _flexio_spi_shift_direction
{
kFLEXIO_SPI_MsbFirst = 0, /*!< Data transfers start with most significant bit. */
kFLEXIO_SPI_LsbFirst = 1, /*!< Data transfers start with least significant bit. */
} flexio_spi_shift_direction_t;
/*! @brief FlexIO SPI data length mode options. */
typedef enum _flexio_spi_data_bitcount_mode
{
kFLEXIO_SPI_8BitMode = 0x08U, /*!< 8-bit data transmission mode. */
kFLEXIO_SPI_16BitMode = 0x10U, /*!< 16-bit data transmission mode. */
} flexio_spi_data_bitcount_mode_t;
/*! @brief Define FlexIO SPI interrupt mask. */
enum _flexio_spi_interrupt_enable
{
kFLEXIO_SPI_TxEmptyInterruptEnable = 0x1U, /*!< Transmit buffer empty interrupt enable. */
kFLEXIO_SPI_RxFullInterruptEnable = 0x2U, /*!< Receive buffer full interrupt enable. */
};
/*! @brief Define FlexIO SPI status mask. */
enum _flexio_spi_status_flags
{
kFLEXIO_SPI_TxBufferEmptyFlag = 0x1U, /*!< Transmit buffer empty flag. */
kFLEXIO_SPI_RxBufferFullFlag = 0x2U, /*!< Receive buffer full flag. */
};
/*! @brief Define FlexIO SPI DMA mask. */
enum _flexio_spi_dma_enable
{
kFLEXIO_SPI_TxDmaEnable = 0x1U, /*!< Tx DMA request source */
kFLEXIO_SPI_RxDmaEnable = 0x2U, /*!< Rx DMA request source */
kFLEXIO_SPI_DmaAllEnable = 0x3U, /*!< All DMA request source*/
};
/*! @brief Define FlexIO SPI transfer flags. */
enum _flexio_spi_transfer_flags
{
kFLEXIO_SPI_8bitMsb = 0x1U, /*!< FlexIO SPI 8-bit MSB first */
kFLEXIO_SPI_8bitLsb = 0x2U, /*!< FlexIO SPI 8-bit LSB first */
kFLEXIO_SPI_16bitMsb = 0x9U, /*!< FlexIO SPI 16-bit MSB first */
kFLEXIO_SPI_16bitLsb = 0xaU, /*!< FlexIO SPI 16-bit LSB first */
};
/*! @brief Define FlexIO SPI access structure typedef. */
typedef struct _flexio_spi_type
{
FLEXIO_Type *flexioBase; /*!< FlexIO base pointer. */
uint8_t SDOPinIndex; /*!< Pin select for data output. */
uint8_t SDIPinIndex; /*!< Pin select for data input. */
uint8_t SCKPinIndex; /*!< Pin select for clock. */
uint8_t CSnPinIndex; /*!< Pin select for enable. */
uint8_t shifterIndex[2]; /*!< Shifter index used in FlexIO SPI. */
uint8_t timerIndex[2]; /*!< Timer index used in FlexIO SPI. */
} FLEXIO_SPI_Type;
/*! @brief Define FlexIO SPI master configuration structure. */
typedef struct _flexio_spi_master_config
{
bool enableMaster; /*!< Enable/disable FlexIO SPI master after configuration. */
bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode. */
bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode. */
bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers,
fast access requires the FlexIO clock to be at least
twice the frequency of the bus clock. */
uint32_t baudRate_Bps; /*!< Baud rate in Bps. */
flexio_spi_clock_phase_t phase; /*!< Clock phase. */
flexio_spi_data_bitcount_mode_t dataMode; /*!< 8bit or 16bit mode. */
} flexio_spi_master_config_t;
/*! @brief Define FlexIO SPI slave configuration structure. */
typedef struct _flexio_spi_slave_config
{
bool enableSlave; /*!< Enable/disable FlexIO SPI slave after configuration. */
bool enableInDoze; /*!< Enable/disable FlexIO operation in doze mode. */
bool enableInDebug; /*!< Enable/disable FlexIO operation in debug mode. */
bool enableFastAccess; /*!< Enable/disable fast access to FlexIO registers,
fast access requires the FlexIO clock to be at least
twice the frequency of the bus clock. */
flexio_spi_clock_phase_t phase; /*!< Clock phase. */
flexio_spi_data_bitcount_mode_t dataMode; /*!< 8bit or 16bit mode. */
} flexio_spi_slave_config_t;
/*! @brief Define FlexIO SPI transfer structure. */
typedef struct _flexio_spi_transfer
{
uint8_t *txData; /*!< Send buffer. */
uint8_t *rxData; /*!< Receive buffer. */
size_t dataSize; /*!< Transfer bytes. */
uint8_t flags; /*!< FlexIO SPI control flag, MSB first or LSB first. */
} flexio_spi_transfer_t;
/*! @brief typedef for flexio_spi_master_handle_t in advance. */
typedef struct _flexio_spi_master_handle flexio_spi_master_handle_t;
/*! @brief Slave handle is the same with master handle. */
typedef flexio_spi_master_handle_t flexio_spi_slave_handle_t;
/*! @brief FlexIO SPI master callback for finished transmit */
typedef void (*flexio_spi_master_transfer_callback_t)(FLEXIO_SPI_Type *base,
flexio_spi_master_handle_t *handle,
status_t status,
void *userData);
/*! @brief FlexIO SPI slave callback for finished transmit */
typedef void (*flexio_spi_slave_transfer_callback_t)(FLEXIO_SPI_Type *base,
flexio_spi_slave_handle_t *handle,
status_t status,
void *userData);
/*! @brief Define FlexIO SPI handle structure. */
struct _flexio_spi_master_handle
{
uint8_t *txData; /*!< Transfer buffer. */
uint8_t *rxData; /*!< Receive buffer. */
size_t transferSize; /*!< Total bytes to be transferred. */
volatile size_t txRemainingBytes; /*!< Send data remaining in bytes. */
volatile size_t rxRemainingBytes; /*!< Receive data remaining in bytes. */
volatile uint32_t state; /*!< FlexIO SPI internal state. */
uint8_t bytePerFrame; /*!< SPI mode, 2bytes or 1byte in a frame */
flexio_spi_shift_direction_t direction; /*!< Shift direction. */
flexio_spi_master_transfer_callback_t callback; /*!< FlexIO SPI callback. */
void *userData; /*!< Callback parameter. */
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/
/*!
* @name FlexIO SPI Configuration
* @{
*/
/*!
* @brief Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI master hardware,
* and configures the FlexIO SPI with FlexIO SPI master configuration. The
* configuration structure can be filled by the user, or be set with default values
* by the FLEXIO_SPI_MasterGetDefaultConfig().
*
* @note FlexIO SPI master only support CPOL = 0, which means clock inactive low.
*
* Example
@code
FLEXIO_SPI_Type spiDev = {
.flexioBase = FLEXIO,
.SDOPinIndex = 0,
.SDIPinIndex = 1,
.SCKPinIndex = 2,
.CSnPinIndex = 3,
.shifterIndex = {0,1},
.timerIndex = {0,1}
};
flexio_spi_master_config_t config = {
.enableMaster = true,
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.baudRate_Bps = 500000,
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
.direction = kFLEXIO_SPI_MsbFirst,
.dataMode = kFLEXIO_SPI_8BitMode
};
FLEXIO_SPI_MasterInit(&spiDev, &config, srcClock_Hz);
@endcode
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param masterConfig Pointer to the flexio_spi_master_config_t structure.
* @param srcClock_Hz FlexIO source clock in Hz.
*/
void FLEXIO_SPI_MasterInit(FLEXIO_SPI_Type *base, flexio_spi_master_config_t *masterConfig, uint32_t srcClock_Hz);
/*!
* @brief Resets the FlexIO SPI timer and shifter config.
*
* @param base Pointer to the FLEXIO_SPI_Type.
*/
void FLEXIO_SPI_MasterDeinit(FLEXIO_SPI_Type *base);
/*!
* @brief Gets the default configuration to configure the FlexIO SPI master. The configuration
* can be used directly by calling the FLEXIO_SPI_MasterConfigure().
* Example:
@code
flexio_spi_master_config_t masterConfig;
FLEXIO_SPI_MasterGetDefaultConfig(&masterConfig);
@endcode
* @param masterConfig Pointer to the flexio_spi_master_config_t structure.
*/
void FLEXIO_SPI_MasterGetDefaultConfig(flexio_spi_master_config_t *masterConfig);
/*!
* @brief Ungates the FlexIO clock, resets the FlexIO module, configures the FlexIO SPI slave hardware
* configuration, and configures the FlexIO SPI with FlexIO SPI slave configuration. The
* configuration structure can be filled by the user, or be set with default values
* by the FLEXIO_SPI_SlaveGetDefaultConfig().
*
* @note Only one timer is needed in the FlexIO SPI slave. As a result, the second timer index is ignored.
* FlexIO SPI slave only support CPOL = 0, which means clock inactive low.
* Example
@code
FLEXIO_SPI_Type spiDev = {
.flexioBase = FLEXIO,
.SDOPinIndex = 0,
.SDIPinIndex = 1,
.SCKPinIndex = 2,
.CSnPinIndex = 3,
.shifterIndex = {0,1},
.timerIndex = {0}
};
flexio_spi_slave_config_t config = {
.enableSlave = true,
.enableInDoze = false,
.enableInDebug = true,
.enableFastAccess = false,
.phase = kFLEXIO_SPI_ClockPhaseFirstEdge,
.direction = kFLEXIO_SPI_MsbFirst,
.dataMode = kFLEXIO_SPI_8BitMode
};
FLEXIO_SPI_SlaveInit(&spiDev, &config);
@endcode
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param slaveConfig Pointer to the flexio_spi_slave_config_t structure.
*/
void FLEXIO_SPI_SlaveInit(FLEXIO_SPI_Type *base, flexio_spi_slave_config_t *slaveConfig);
/*!
* @brief Gates the FlexIO clock.
*
* @param base Pointer to the FLEXIO_SPI_Type.
*/
void FLEXIO_SPI_SlaveDeinit(FLEXIO_SPI_Type *base);
/*!
* @brief Gets the default configuration to configure the FlexIO SPI slave. The configuration
* can be used directly for calling the FLEXIO_SPI_SlaveConfigure().
* Example:
@code
flexio_spi_slave_config_t slaveConfig;
FLEXIO_SPI_SlaveGetDefaultConfig(&slaveConfig);
@endcode
* @param slaveConfig Pointer to the flexio_spi_slave_config_t structure.
*/
void FLEXIO_SPI_SlaveGetDefaultConfig(flexio_spi_slave_config_t *slaveConfig);
/*@}*/
/*!
* @name Status
* @{
*/
/*!
* @brief Gets FlexIO SPI status flags.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @return status flag; Use the status flag to AND the following flag mask and get the status.
* @arg kFLEXIO_SPI_TxEmptyFlag
* @arg kFLEXIO_SPI_RxEmptyFlag
*/
uint32_t FLEXIO_SPI_GetStatusFlags(FLEXIO_SPI_Type *base);
/*!
* @brief Clears FlexIO SPI status flags.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param mask status flag
* The parameter can be any combination of the following values:
* @arg kFLEXIO_SPI_TxEmptyFlag
* @arg kFLEXIO_SPI_RxEmptyFlag
*/
void FLEXIO_SPI_ClearStatusFlags(FLEXIO_SPI_Type *base, uint32_t mask);
/*@}*/
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the FlexIO SPI interrupt.
*
* This function enables the FlexIO SPI interrupt.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param mask interrupt source. The parameter can be any combination of the following values:
* @arg kFLEXIO_SPI_RxFullInterruptEnable
* @arg kFLEXIO_SPI_TxEmptyInterruptEnable
*/
void FLEXIO_SPI_EnableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask);
/*!
* @brief Disables the FlexIO SPI interrupt.
*
* This function disables the FlexIO SPI interrupt.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param mask interrupt source The parameter can be any combination of the following values:
* @arg kFLEXIO_SPI_RxFullInterruptEnable
* @arg kFLEXIO_SPI_TxEmptyInterruptEnable
*/
void FLEXIO_SPI_DisableInterrupts(FLEXIO_SPI_Type *base, uint32_t mask);
/*@}*/
/*!
* @name DMA Control
* @{
*/
/*!
* @brief Enables/disables the FlexIO SPI transmit DMA. This function enables/disables the FlexIO SPI Tx DMA,
* which means that asserting the kFLEXIO_SPI_TxEmptyFlag does/doesn't trigger the DMA request.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param mask SPI DMA source.
* @param enable True means enable DMA, false means disable DMA.
*/
void FLEXIO_SPI_EnableDMA(FLEXIO_SPI_Type *base, uint32_t mask, bool enable);
/*!
* @brief Gets the FlexIO SPI transmit data register address for MSB first transfer.
*
* This function returns the SPI data register address, which is mainly used by DMA/eDMA.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @return FlexIO SPI transmit data register address.
*/
static inline uint32_t FLEXIO_SPI_GetTxDataRegisterAddress(FLEXIO_SPI_Type *base,
flexio_spi_shift_direction_t direction)
{
if (direction == kFLEXIO_SPI_MsbFirst)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped,
base->shifterIndex[0]) +
3U;
}
else
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBuffer, base->shifterIndex[0]);
}
}
/*!
* @brief Gets the FlexIO SPI receive data register address for the MSB first transfer.
*
* This function returns the SPI data register address, which is mainly used by DMA/eDMA.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @return FlexIO SPI receive data register address.
*/
static inline uint32_t FLEXIO_SPI_GetRxDataRegisterAddress(FLEXIO_SPI_Type *base,
flexio_spi_shift_direction_t direction)
{
if (direction == kFLEXIO_SPI_MsbFirst)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped, base->shifterIndex[1]);
}
else
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBuffer, base->shifterIndex[1]) + 3U;
}
}
/*@}*/
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Enables/disables the FlexIO SPI module operation.
*
* @param base Pointer to the FLEXIO_SPI_Type.
* @param enable True to enable, false does not have any effect.
*/
static inline void FLEXIO_SPI_Enable(FLEXIO_SPI_Type *base, bool enable)
{
if (enable)
{
base->flexioBase->CTRL |= FLEXIO_CTRL_FLEXEN_MASK;
}
}
/*!
* @brief Sets baud rate for the FlexIO SPI transfer, which is only used for the master.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param baudRate_Bps Baud Rate needed in Hz.
* @param srcClockHz SPI source clock frequency in Hz.
*/
void FLEXIO_SPI_MasterSetBaudRate(FLEXIO_SPI_Type *base, uint32_t baudRate_Bps, uint32_t srcClockHz);
/*!
* @brief Writes one byte of data, which is sent using the MSB method.
*
* @note This is a non-blocking API, which returns directly after the data is put into the
* data register but the data transfer is not finished on the bus. Ensure that
* the TxEmptyFlag is asserted before calling this API.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @param data 8 bit/16 bit data.
*/
static inline void FLEXIO_SPI_WriteData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction, uint16_t data)
{
if (direction == kFLEXIO_SPI_MsbFirst)
{
base->flexioBase->SHIFTBUFBBS[base->shifterIndex[0]] = data;
}
else
{
base->flexioBase->SHIFTBUF[base->shifterIndex[0]] = data;
}
}
/*!
* @brief Reads 8 bit/16 bit data.
*
* @note This is a non-blocking API, which returns directly after the data is read from the
* data register. Ensure that the RxFullFlag is asserted before calling this API.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @return 8 bit/16 bit data received.
*/
static inline uint16_t FLEXIO_SPI_ReadData(FLEXIO_SPI_Type *base, flexio_spi_shift_direction_t direction)
{
if (direction == kFLEXIO_SPI_MsbFirst)
{
return base->flexioBase->SHIFTBUFBIS[base->shifterIndex[1]];
}
else
{
return base->flexioBase->SHIFTBUFBYS[base->shifterIndex[1]];
}
}
/*!
* @brief Sends a buffer of data bytes.
*
* @note This function blocks using the polling method until all bytes have been sent.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @param buffer The data bytes to send.
* @param size The number of data bytes to send.
*/
void FLEXIO_SPI_WriteBlocking(FLEXIO_SPI_Type *base,
flexio_spi_shift_direction_t direction,
const uint8_t *buffer,
size_t size);
/*!
* @brief Receives a buffer of bytes.
*
* @note This function blocks using the polling method until all bytes have been received.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param direction Shift direction of MSB first or LSB first.
* @param buffer The buffer to store the received bytes.
* @param size The number of data bytes to be received.
* @param direction Shift direction of MSB first or LSB first.
*/
void FLEXIO_SPI_ReadBlocking(FLEXIO_SPI_Type *base,
flexio_spi_shift_direction_t direction,
uint8_t *buffer,
size_t size);
/*!
* @brief Receives a buffer of bytes.
*
* @note This function blocks via polling until all bytes have been received.
*
* @param base pointer to FLEXIO_SPI_Type structure
* @param xfer FlexIO SPI transfer structure, see #flexio_spi_transfer_t.
*/
void FLEXIO_SPI_MasterTransferBlocking(FLEXIO_SPI_Type *base, flexio_spi_transfer_t *xfer);
/*Transactional APIs*/
/*!
* @name Transactional
* @{
*/
/*!
* @brief Initializes the FlexIO SPI Master handle, which is used in transactional functions.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
* @param callback The callback function.
* @param userData The parameter of the callback function.
* @retval kStatus_Success Successfully create the handle.
* @retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
*/
status_t FLEXIO_SPI_MasterTransferCreateHandle(FLEXIO_SPI_Type *base,
flexio_spi_master_handle_t *handle,
flexio_spi_master_transfer_callback_t callback,
void *userData);
/*!
* @brief Master transfer data using IRQ.
*
* This function sends data using IRQ. This is a non-blocking function, which returns
* right away. When all data is sent out/received, the callback function is called.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
* @param xfer FlexIO SPI transfer structure. See #flexio_spi_transfer_t.
* @retval kStatus_Success Successfully start a transfer.
* @retval kStatus_InvalidArgument Input argument is invalid.
* @retval kStatus_FLEXIO_SPI_Busy SPI is not idle, is running another transfer.
*/
status_t FLEXIO_SPI_MasterTransferNonBlocking(FLEXIO_SPI_Type *base,
flexio_spi_master_handle_t *handle,
flexio_spi_transfer_t *xfer);
/*!
* @brief Aborts the master data transfer, which used IRQ.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
*/
void FLEXIO_SPI_MasterTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle);
/*!
* @brief Gets the data transfer status which used IRQ.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
* @param count Number of bytes transferred so far by the non-blocking transaction.
* @retval kStatus_InvalidArgument count is Invalid.
* @retval kStatus_Success Successfully return the count.
*/
status_t FLEXIO_SPI_MasterTransferGetCount(FLEXIO_SPI_Type *base, flexio_spi_master_handle_t *handle, size_t *count);
/*!
* @brief FlexIO SPI master IRQ handler function.
*
* @param spiType Pointer to the FLEXIO_SPI_Type structure.
* @param spiHandle Pointer to the flexio_spi_master_handle_t structure to store the transfer state.
*/
void FLEXIO_SPI_MasterTransferHandleIRQ(void *spiType, void *spiHandle);
/*!
* @brief Initializes the FlexIO SPI Slave handle, which is used in transactional functions.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
* @param callback The callback function.
* @param userData The parameter of the callback function.
* @retval kStatus_Success Successfully create the handle.
* @retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
*/
status_t FLEXIO_SPI_SlaveTransferCreateHandle(FLEXIO_SPI_Type *base,
flexio_spi_slave_handle_t *handle,
flexio_spi_slave_transfer_callback_t callback,
void *userData);
/*!
* @brief Slave transfer data using IRQ.
*
* This function sends data using IRQ. This is a non-blocking function, which returns
* right away. When all data is sent out/received, the callback function is called.
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param xfer FlexIO SPI transfer structure. See #flexio_spi_transfer_t.
* @retval kStatus_Success Successfully start a transfer.
* @retval kStatus_InvalidArgument Input argument is invalid.
* @retval kStatus_FLEXIO_SPI_Busy SPI is not idle; it is running another transfer.
*/
status_t FLEXIO_SPI_SlaveTransferNonBlocking(FLEXIO_SPI_Type *base,
flexio_spi_slave_handle_t *handle,
flexio_spi_transfer_t *xfer);
/*!
* @brief Aborts the slave data transfer which used IRQ, share same API with master.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
*/
static inline void FLEXIO_SPI_SlaveTransferAbort(FLEXIO_SPI_Type *base, flexio_spi_slave_handle_t *handle)
{
FLEXIO_SPI_MasterTransferAbort(base, handle);
}
/*!
* @brief Gets the data transfer status which used IRQ, share same API with master.
*
* @param base Pointer to the FLEXIO_SPI_Type structure.
* @param handle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
* @param count Number of bytes transferred so far by the non-blocking transaction.
* @retval kStatus_InvalidArgument count is Invalid.
* @retval kStatus_Success Successfully return the count.
*/
static inline status_t FLEXIO_SPI_SlaveTransferGetCount(FLEXIO_SPI_Type *base,
flexio_spi_slave_handle_t *handle,
size_t *count)
{
return FLEXIO_SPI_MasterTransferGetCount(base, handle, count);
}
/*!
* @brief FlexIO SPI slave IRQ handler function.
*
* @param spiType Pointer to the FLEXIO_SPI_Type structure.
* @param spiHandle Pointer to the flexio_spi_slave_handle_t structure to store the transfer state.
*/
void FLEXIO_SPI_SlaveTransferHandleIRQ(void *spiType, void *spiHandle);
/*@}*/
#if defined(__cplusplus)
}
#endif /*_cplusplus*/
/*@}*/
#endif /*_FSL_FLEXIO_SPI_H_*/