libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/gd32350r-eval/Libraries/GD32F3x0_standard_peripheral/Include/gd32f3x0_usart.h

596 lines
38 KiB
C
Raw Normal View History

[add]add gd32350r-eval bsp
2021-06-18 22:34:45 +08:00
/*!
\file gd32f3x0_usart.h
\brief definitions for the USART
\version 2017-06-06, V1.0.0, firmware for GD32F3x0
\version 2019-06-01, V2.0.0, firmware for GD32F3x0
*/
/*
Copyright (c) 2019, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef GD32F3X0_USART_H
#define GD32F3X0_USART_H
#include "gd32f3x0.h"
/* USARTx(x=0,1) definitions */
#define USART0 (USART_BASE + 0x0000F400U)
#define USART1 USART_BASE
/* registers definitions */
#define USART_CTL0(usartx) REG32((usartx) + 0x00000000U) /*!< USART control register 0 */
#define USART_CTL1(usartx) REG32((usartx) + 0x00000004U) /*!< USART control register 1 */
#define USART_CTL2(usartx) REG32((usartx) + 0x00000008U) /*!< USART control register 2 */
#define USART_BAUD(usartx) REG32((usartx) + 0x0000000CU) /*!< USART baud rate register */
#define USART_GP(usartx) REG32((usartx) + 0x00000010U) /*!< USART guard time and prescaler register */
#define USART_RT(usartx) REG32((usartx) + 0x00000014U) /*!< USART receiver timeout register */
#define USART_CMD(usartx) REG32((usartx) + 0x00000018U) /*!< USART command register */
#define USART_STAT(usartx) REG32((usartx) + 0x0000001CU) /*!< USART status register */
#define USART_INTC(usartx) REG32((usartx) + 0x00000020U) /*!< USART status clear register */
#define USART_RDATA(usartx) REG32((usartx) + 0x00000024U) /*!< USART receive data register */
#define USART_TDATA(usartx) REG32((usartx) + 0x00000028U) /*!< USART transmit data register */
#define USART_RFCS(usartx) REG32((usartx) + 0x000000D0U) /*!< USART receive FIFO control and status register */
/* bits definitions */
/* USARTx_CTL0 */
#define USART_CTL0_UEN BIT(0) /*!< USART enable */
#define USART_CTL0_UESM BIT(1) /*!< USART enable in deep-sleep mode */
#define USART_CTL0_REN BIT(2) /*!< receiver enable */
#define USART_CTL0_TEN BIT(3) /*!< transmitter enable */
#define USART_CTL0_IDLEIE BIT(4) /*!< idle line detected interrupt enable */
#define USART_CTL0_RBNEIE BIT(5) /*!< read data buffer not empty interrupt and overrun error interrupt enable */
#define USART_CTL0_TCIE BIT(6) /*!< transmission complete interrupt enable */
#define USART_CTL0_TBEIE BIT(7) /*!< transmitter register empty interrupt enable */
#define USART_CTL0_PERRIE BIT(8) /*!< parity error interrupt enable */
#define USART_CTL0_PM BIT(9) /*!< parity mode */
#define USART_CTL0_PCEN BIT(10) /*!< parity control enable */
#define USART_CTL0_WM BIT(11) /*!< wakeup method in mute mode */
#define USART_CTL0_WL BIT(12) /*!< word length */
#define USART_CTL0_MEN BIT(13) /*!< mute mode enable */
#define USART_CTL0_AMIE BIT(14) /*!< address match interrupt enable */
#define USART_CTL0_OVSMOD BIT(15) /*!< oversample mode */
#define USART_CTL0_DED BITS(16,20) /*!< driver enable deassertion time */
#define USART_CTL0_DEA BITS(21,25) /*!< driver enable assertion time */
#define USART_CTL0_RTIE BIT(26) /*!< receiver timeout interrupt enable */
#define USART_CTL0_EBIE BIT(27) /*!< end of block interrupt enable */
/* USARTx_CTL1 */
#define USART_CTL1_ADDM BIT(4) /*!< address detection mode */
#define USART_CTL1_LBLEN BIT(5) /*!< LIN break frame length */
#define USART_CTL1_LBDIE BIT(6) /*!< LIN break detection interrupt enable */
#define USART_CTL1_CLEN BIT(8) /*!< last bit clock pulse */
#define USART_CTL1_CPH BIT(9) /*!< clock phase */
#define USART_CTL1_CPL BIT(10) /*!< clock polarity */
#define USART_CTL1_CKEN BIT(11) /*!< ck pin enable */
#define USART_CTL1_STB BITS(12,13) /*!< stop bits length */
#define USART_CTL1_LMEN BIT(14) /*!< LIN mode enable */
#define USART_CTL1_STRP BIT(15) /*!< swap TX/RX pins */
#define USART_CTL1_RINV BIT(16) /*!< RX pin level inversion */
#define USART_CTL1_TINV BIT(17) /*!< TX pin level inversion */
#define USART_CTL1_DINV BIT(18) /*!< data bit level inversion */
#define USART_CTL1_MSBF BIT(19) /*!< most significant bit first */
#define USART_CTL1_ABDEN BIT(20) /*!< auto baud rate enable */
#define USART_CTL1_ABDM BITS(21,22) /*!< auto baud rate mode */
#define USART_CTL1_RTEN BIT(23) /*!< receiver timeout enable */
#define USART_CTL1_ADDR BITS(24,31) /*!< address of the USART terminal */
/* USARTx_CTL2 */
#define USART_CTL2_ERRIE BIT(0) /*!< error interrupt enable in multibuffer communication */
#define USART_CTL2_IREN BIT(1) /*!< IrDA mode enable */
#define USART_CTL2_IRLP BIT(2) /*!< IrDA low-power */
#define USART_CTL2_HDEN BIT(3) /*!< half-duplex enable */
#define USART_CTL2_NKEN BIT(4) /*!< NACK enable in smartcard mode */
#define USART_CTL2_SCEN BIT(5) /*!< smartcard mode enable */
#define USART_CTL2_DENR BIT(6) /*!< DMA enable for reception */
#define USART_CTL2_DENT BIT(7) /*!< DMA enable for transmission */
#define USART_CTL2_RTSEN BIT(8) /*!< RTS enable */
#define USART_CTL2_CTSEN BIT(9) /*!< CTS enable */
#define USART_CTL2_CTSIE BIT(10) /*!< CTS interrupt enable */
#define USART_CTL2_OSB BIT(11) /*!< one sample bit mode */
#define USART_CTL2_OVRD BIT(12) /*!< overrun disable */
#define USART_CTL2_DDRE BIT(13) /*!< disable DMA on reception error */
#define USART_CTL2_DEM BIT(14) /*!< driver enable mode */
#define USART_CTL2_DEP BIT(15) /*!< driver enable polarity mode */
#define USART_CTL2_SCRTNUM BITS(17,19) /*!< smartcard auto-retry number */
#define USART_CTL2_WUM BITS(20,21) /*!< wakeup mode from deep-sleep mode */
#define USART_CTL2_WUIE BIT(22) /*!< wakeup from deep-sleep mode interrupt enable */
/* USARTx_BAUD */
#define USART_BAUD_FRADIV BITS(0,3) /*!< fraction of baud-rate divider */
#define USART_BAUD_INTDIV BITS(4,15) /*!< integer of baud-rate divider */
/* USARTx_GP */
#define USART_GP_PSC BITS(0,7) /*!< prescaler value for dividing the system clock */
#define USART_GP_GUAT BITS(8,15) /*!< guard time value in smartcard mode */
/* USARTx_RT */
#define USART_RT_RT BITS(0,23) /*!< receiver timeout threshold */
#define USART_RT_BL BITS(24,31) /*!< block length */
/* USARTx_CMD */
#define USART_CMD_ABDCMD BIT(0) /*!< auto baudrate detection command */
#define USART_CMD_SBKCMD BIT(1) /*!< send break command */
#define USART_CMD_MMCMD BIT(2) /*!< mute mode command */
#define USART_CMD_RXFCMD BIT(3) /*!< receive data flush command */
#define USART_CMD_TXFCMD BIT(4) /*!< transmit data flush request */
/* USARTx_STAT */
#define USART_STAT_PERR BIT(0) /*!< parity error flag */
#define USART_STAT_FERR BIT(1) /*!< frame error flag */
#define USART_STAT_NERR BIT(2) /*!< noise error flag */
#define USART_STAT_ORERR BIT(3) /*!< overrun error */
#define USART_STAT_IDLEF BIT(4) /*!< idle line detected flag */
#define USART_STAT_RBNE BIT(5) /*!< read data buffer not empty */
#define USART_STAT_TC BIT(6) /*!< transmission completed */
#define USART_STAT_TBE BIT(7) /*!< transmit data register empty */
#define USART_STAT_LBDF BIT(8) /*!< LIN break detected flag */
#define USART_STAT_CTSF BIT(9) /*!< CTS change flag */
#define USART_STAT_CTS BIT(10) /*!< CTS level */
#define USART_STAT_RTF BIT(11) /*!< receiver timeout flag */
#define USART_STAT_EBF BIT(12) /*!< end of block flag */
#define USART_STAT_ABDE BIT(14) /*!< auto baudrate detection error */
#define USART_STAT_ABDF BIT(15) /*!< auto baudrate detection flag */
#define USART_STAT_BSY BIT(16) /*!< busy flag */
#define USART_STAT_AMF BIT(17) /*!< address match flag */
#define USART_STAT_SBF BIT(18) /*!< send break flag */
#define USART_STAT_RWU BIT(19) /*!< receiver wakeup from mute mode */
#define USART_STAT_WUF BIT(20) /*!< wakeup from deep-sleep mode flag */
#define USART_STAT_TEA BIT(21) /*!< transmit enable acknowledge flag */
#define USART_STAT_REA BIT(22) /*!< receive enable acknowledge flag */
/* USARTx_INTC */
#define USART_INTC_PEC BIT(0) /*!< parity error clear */
#define USART_INTC_FEC BIT(1) /*!< frame error flag clear */
#define USART_INTC_NEC BIT(2) /*!< noise detected clear */
#define USART_INTC_OREC BIT(3) /*!< overrun error clear */
#define USART_INTC_IDLEC BIT(4) /*!< idle line detected clear */
#define USART_INTC_TCC BIT(6) /*!< transmission complete clear */
#define USART_INTC_LBDC BIT(8) /*!< LIN break detected clear */
#define USART_INTC_CTSC BIT(9) /*!< CTS change clear */
#define USART_INTC_RTC BIT(11) /*!< receiver timeout clear */
#define USART_INTC_EBC BIT(12) /*!< end of timeout clear */
#define USART_INTC_AMC BIT(17) /*!< address match clear */
#define USART_INTC_WUC BIT(20) /*!< wakeup from deep-sleep mode clear */
/* USARTx_RDATA */
#define USART_RDATA_RDATA BITS(0,8) /*!< receive data value */
/* USARTx_TDATA */
#define USART_TDATA_TDATA BITS(0,8) /*!< transmit data value */
/* USARTx_RFCS */
#define USART_RFCS_ELNACK BIT(0) /*!< early NACK */
#define USART_RFCS_RFEN BIT(8) /*!< receive FIFO enable */
#define USART_RFCS_RFFIE BIT(9) /*!< receive FIFO full interrupt enable */
#define USART_RFCS_RFE BIT(10) /*!< receive FIFO empty flag */
#define USART_RFCS_RFF BIT(11) /*!< receive FIFO full flag */
#define USART_RFCS_RFCNT BITS(12,14) /*!< receive FIFO counter number */
#define USART_RFCS_RFFINT BIT(15) /*!< receive FIFO full interrupt flag */
/* constants definitions */
/* define the USART bit position and its register index offset */
#define USART_REGIDX_BIT(regidx, bitpos) (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos))
#define USART_REG_VAL(usartx, offset) (REG32((usartx) + (((uint32_t)(offset) & 0x0000FFFFU) >> 6)))
#define USART_BIT_POS(val) ((uint32_t)(val) & 0x0000001FU)
#define USART_REGIDX_BIT2(regidx, bitpos, regidx2, bitpos2) (((uint32_t)(regidx2) << 22) | (uint32_t)((bitpos2) << 16)\
| (((uint32_t)(regidx) << 6) | (uint32_t)(bitpos)))
#define USART_REG_VAL2(usartx, offset) (REG32((usartx) + ((uint32_t)(offset) >> 22)))
#define USART_BIT_POS2(val) (((uint32_t)(val) & 0x001F0000U) >> 16)
/* register offset */
#define USART_CTL0_REG_OFFSET (0x00000000U) /*!< CTL0 register offset */
#define USART_CTL1_REG_OFFSET (0x00000004U) /*!< CTL1 register offset */
#define USART_CTL2_REG_OFFSET (0x00000008U) /*!< CTL2 register offset */
#define USART_STAT_REG_OFFSET (0x0000001CU) /*!< STAT register offset */
#define USART_RFCS_REG_OFFSET (0x000000D0U) /*!< RFCS register offset */
/* USART flags */
typedef enum{
/* flags in STAT register */
USART_FLAG_REA = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 22U), /*!< receive enable acknowledge flag */
USART_FLAG_TEA = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 21U), /*!< transmit enable acknowledge flag */
USART_FLAG_WU = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 20U), /*!< wakeup from deep-sleep mode flag */
USART_FLAG_RWU = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 19U), /*!< receiver wakeup from mute mode */
USART_FLAG_SB = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 18U), /*!< send break flag */
USART_FLAG_AM = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 17U), /*!< ADDR match flag */
USART_FLAG_BSY = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 16U), /*!< busy flag */
USART_FLAG_ABD = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 15U), /*!< auto baudrate detection flag */
USART_FLAG_ABDE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 14U), /*!< auto baudrate detection error */
USART_FLAG_EB = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 12U), /*!< end of block flag */
USART_FLAG_RT = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 11U), /*!< receiver timeout flag */
USART_FLAG_CTS = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 10U), /*!< CTS level */
USART_FLAG_CTSF = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 9U), /*!< CTS change flag */
USART_FLAG_LBD = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 8U), /*!< LIN break detected flag */
USART_FLAG_TBE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 7U), /*!< transmit data buffer empty */
USART_FLAG_TC = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 6U), /*!< transmission complete */
USART_FLAG_RBNE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 5U), /*!< read data buffer not empty */
USART_FLAG_IDLE = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 4U), /*!< IDLE line detected flag */
USART_FLAG_ORERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 3U), /*!< overrun error */
USART_FLAG_NERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 2U), /*!< noise error flag */
USART_FLAG_FERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 1U), /*!< frame error flag */
USART_FLAG_PERR = USART_REGIDX_BIT(USART_STAT_REG_OFFSET, 0U), /*!< parity error flag */
/* flags in RFCS register */
USART_FLAG_RFF = USART_REGIDX_BIT(USART_RFCS_REG_OFFSET, 11U), /*!< receive FIFO full flag */
USART_FLAG_RFE = USART_REGIDX_BIT(USART_RFCS_REG_OFFSET, 10U), /*!< receive FIFO empty flag */
}usart_flag_enum;
/* USART interrupt flags */
typedef enum
{
/* interrupt flags in CTL0 register */
USART_INT_FLAG_EB = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 27U, USART_STAT_REG_OFFSET, 12U), /*!< end of block interrupt flag */
USART_INT_FLAG_RT = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 26U, USART_STAT_REG_OFFSET, 11U), /*!< receiver timeout interrupt flag */
USART_INT_FLAG_AM = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 14U, USART_STAT_REG_OFFSET, 17U), /*!< address match interrupt flag */
USART_INT_FLAG_PERR = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 8U, USART_STAT_REG_OFFSET, 0U), /*!< parity error interrupt flag */
USART_INT_FLAG_TBE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 7U, USART_STAT_REG_OFFSET, 7U), /*!< transmitter buffer empty interrupt flag */
USART_INT_FLAG_TC = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 6U, USART_STAT_REG_OFFSET, 6U), /*!< transmission complete interrupt flag */
USART_INT_FLAG_RBNE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 5U, USART_STAT_REG_OFFSET, 5U), /*!< read data buffer not empty interrupt flag */
USART_INT_FLAG_RBNE_ORERR = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 5U, USART_STAT_REG_OFFSET, 3U), /*!< overrun error interrupt flag */
USART_INT_FLAG_IDLE = USART_REGIDX_BIT2(USART_CTL0_REG_OFFSET, 4U, USART_STAT_REG_OFFSET, 4U), /*!< IDLE line detected interrupt flag */
/* interrupt flags in CTL1 register */
USART_INT_FLAG_LBD = USART_REGIDX_BIT2(USART_CTL1_REG_OFFSET, 6U, USART_STAT_REG_OFFSET, 8U), /*!< LIN break detected interrupt flag */
/* interrupt flags in CTL2 register */
USART_INT_FLAG_WU = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 22U, USART_STAT_REG_OFFSET, 20U), /*!< wakeup from deep-sleep mode interrupt flag */
USART_INT_FLAG_CTS = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 10U, USART_STAT_REG_OFFSET, 9U), /*!< CTS interrupt flag */
USART_INT_FLAG_ERR_NERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 2U), /*!< noise error interrupt flag */
USART_INT_FLAG_ERR_ORERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 3U), /*!< overrun error interrupt flag */
USART_INT_FLAG_ERR_FERR = USART_REGIDX_BIT2(USART_CTL2_REG_OFFSET, 0U, USART_STAT_REG_OFFSET, 1U), /*!< frame error interrupt flag */
/* interrupt flags in RFCS register */
USART_INT_FLAG_RFFINT = USART_REGIDX_BIT2(USART_RFCS_REG_OFFSET, 9U, USART_RFCS_REG_OFFSET, 15U), /*!< receive FIFO full interrupt flag */
}usart_interrupt_flag_enum;
/* USART interrupt enable or disable */
typedef enum
{
/* interrupt in CTL0 register */
USART_INT_EB = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 27U), /*!< end of block interrupt */
USART_INT_RT = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 26U), /*!< receiver timeout interrupt */
USART_INT_AM = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 14U), /*!< address match interrupt */
USART_INT_PERR = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 8U), /*!< parity error interrupt */
USART_INT_TBE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 7U), /*!< transmitter buffer empty interrupt */
USART_INT_TC = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 6U), /*!< transmission complete interrupt */
USART_INT_RBNE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 5U), /*!< read data buffer not empty interrupt and overrun error interrupt */
USART_INT_IDLE = USART_REGIDX_BIT(USART_CTL0_REG_OFFSET, 4U), /*!< IDLE line detected interrupt */
/* interrupt in CTL1 register */
USART_INT_LBD = USART_REGIDX_BIT(USART_CTL1_REG_OFFSET, 6U), /*!< LIN break detected interrupt */
/* interrupt in CTL2 register */
USART_INT_WU = USART_REGIDX_BIT(USART_CTL2_REG_OFFSET, 22U), /*!< wakeup from deep-sleep mode interrupt */
USART_INT_CTS = USART_REGIDX_BIT(USART_CTL2_REG_OFFSET, 10U), /*!< CTS interrupt */
USART_INT_ERR = USART_REGIDX_BIT(USART_CTL2_REG_OFFSET, 0U), /*!< error interrupt */
/* interrupt in RFCS register */
USART_INT_RFF = USART_REGIDX_BIT(USART_RFCS_REG_OFFSET, 9U), /*!< receive FIFO full interrupt */
}usart_interrupt_enum;
/* USART invert configure */
typedef enum {
/* data bit level inversion */
USART_DINV_ENABLE, /*!< data bit level inversion */
USART_DINV_DISABLE, /*!< data bit level not inversion */
/* TX pin level inversion */
USART_TXPIN_ENABLE, /*!< TX pin level inversion */
USART_TXPIN_DISABLE, /*!< TX pin level not inversion */
/* RX pin level inversion */
USART_RXPIN_ENABLE, /*!< RX pin level inversion */
USART_RXPIN_DISABLE, /*!< RX pin level not inversion */
/* swap TX/RX pins */
USART_SWAP_ENABLE, /*!< swap TX/RX pins */
USART_SWAP_DISABLE, /*!< not swap TX/RX pins */
}usart_invert_enum;
/* USART receiver configure */
#define CTL0_REN(regval) (BIT(2) & ((uint32_t)(regval) << 2))
#define USART_RECEIVE_ENABLE CTL0_REN(1) /*!< enable receiver */
#define USART_RECEIVE_DISABLE CTL0_REN(0) /*!< disable receiver */
/* USART transmitter configure */
#define CTL0_TEN(regval) (BIT(3) & ((uint32_t)(regval) << 3))
#define USART_TRANSMIT_ENABLE CTL0_TEN(1) /*!< enable transmitter */
#define USART_TRANSMIT_DISABLE CTL0_TEN(0) /*!< disable transmitter */
/* USART parity bits definitions */
#define CTL0_PM(regval) (BITS(9,10) & ((uint32_t)(regval) << 9))
#define USART_PM_NONE CTL0_PM(0) /*!< no parity */
#define USART_PM_EVEN CTL0_PM(2) /*!< even parity */
#define USART_PM_ODD CTL0_PM(3) /*!< odd parity */
/* USART wakeup method in mute mode */
#define CTL0_WM(regval) (BIT(11) & ((uint32_t)(regval) << 11))
#define USART_WM_IDLE CTL0_WM(0) /*!< idle line */
#define USART_WM_ADDR CTL0_WM(1) /*!< address match */
/* USART word length definitions */
#define CTL0_WL(regval) (BIT(12) & ((uint32_t)(regval) << 12))
#define USART_WL_8BIT CTL0_WL(0) /*!< 8 bits */
#define USART_WL_9BIT CTL0_WL(1) /*!< 9 bits */
/* USART oversample mode */
#define CTL0_OVSMOD(regval) (BIT(15) & ((uint32_t)(regval) << 15))
#define USART_OVSMOD_8 CTL0_OVSMOD(1) /*!< oversampling by 8 */
#define USART_OVSMOD_16 CTL0_OVSMOD(0) /*!< oversampling by 16 */
/* USART address detection mode */
#define CTL1_ADDM(regval) (BIT(4) & ((uint32_t)(regval) << 4))
#define USART_ADDM_4BIT CTL1_ADDM(0) /*!< 4-bit address detection */
#define USART_ADDM_FULLBIT CTL1_ADDM(1) /*!< full-bit address detection */
/* USART LIN break frame length */
#define CTL1_LBLEN(regval) (BIT(5) & ((uint32_t)(regval) << 5))
#define USART_LBLEN_10B CTL1_LBLEN(0) /*!< 10 bits break detection */
#define USART_LBLEN_11B CTL1_LBLEN(1) /*!< 11 bits break detection */
/* USART last bit clock pulse */
#define CTL1_CLEN(regval) (BIT(8) & ((uint32_t)(regval) << 8))
#define USART_CLEN_NONE CTL1_CLEN(0) /*!< clock pulse of the last data bit (MSB) is not output to the CK pin */
#define USART_CLEN_EN CTL1_CLEN(1) /*!< clock pulse of the last data bit (MSB) is output to the CK pin */
/* USART clock phase */
#define CTL1_CPH(regval) (BIT(9) & ((uint32_t)(regval) << 9))
#define USART_CPH_1CK CTL1_CPH(0) /*!< first clock transition is the first data capture edge */
#define USART_CPH_2CK CTL1_CPH(1) /*!< second clock transition is the first data capture edge */
/* USART clock polarity */
#define CTL1_CPL(regval) (BIT(10) & ((uint32_t)(regval) << 10))
#define USART_CPL_LOW CTL1_CPL(0) /*!< steady low value on CK pin */
#define USART_CPL_HIGH CTL1_CPL(1) /*!< steady high value on CK pin */
/* USART stop bits definitions */
#define CTL1_STB(regval) (BITS(12,13) & ((uint32_t)(regval) << 12))
#define USART_STB_1BIT CTL1_STB(0) /*!< 1 bit */
#define USART_STB_0_5BIT CTL1_STB(1) /*!< 0.5 bit */
#define USART_STB_2BIT CTL1_STB(2) /*!< 2 bits */
#define USART_STB_1_5BIT CTL1_STB(3) /*!< 1.5 bits */
/* USART data is transmitted/received with the LSB/MSB first */
#define CTL1_MSBF(regval) (BIT(19) & ((uint32_t)(regval) << 19))
#define USART_MSBF_LSB CTL1_MSBF(0) /*!< LSB first */
#define USART_MSBF_MSB CTL1_MSBF(1) /*!< MSB first */
/* USART auto baud rate detection mode bits definitions */
#define CTL1_ABDM(regval) (BITS(21,22) & ((uint32_t)(regval) << 21))
#define USART_ABDM_FTOR CTL1_ABDM(0) /*!< falling edge to rising edge measurement */
#define USART_ABDM_FTOF CTL1_ABDM(1) /*!< falling edge to falling edge measurement */
/* USART IrDA low-power enable */
#define CTL2_IRLP(regval) (BIT(2) & ((uint32_t)(regval) << 2))
#define USART_IRLP_LOW CTL2_IRLP(1) /*!< low-power */
#define USART_IRLP_NORMAL CTL2_IRLP(0) /*!< normal */
/* DMA enable for reception */
#define CTL2_DENR(regval) (BIT(6) & ((uint32_t)(regval) << 6))
#define USART_DENR_ENABLE CTL2_DENR(1) /*!< enable for reception */
#define USART_DENR_DISABLE CTL2_DENR(0) /*!< disable for reception */
/* DMA enable for transmission */
#define CTL2_DENT(regval) (BIT(7) & ((uint32_t)(regval) << 7))
#define USART_DENT_ENABLE CTL2_DENT(1) /*!< enable for transmission */
#define USART_DENT_DISABLE CTL2_DENT(0) /*!< disable for transmission */
/* USART RTS hardware flow control configure */
#define CTL2_RTSEN(regval) (BIT(8) & ((uint32_t)(regval) << 8))
#define USART_RTS_ENABLE CTL2_RTSEN(1) /*!< RTS hardware flow control enabled */
#define USART_RTS_DISABLE CTL2_RTSEN(0) /*!< RTS hardware flow control disabled */
/* USART CTS hardware flow control configure */
#define CTL2_CTSEN(regval) (BIT(9) & ((uint32_t)(regval) << 9))
#define USART_CTS_ENABLE CTL2_CTSEN(1) /*!< CTS hardware flow control enabled */
#define USART_CTS_DISABLE CTL2_CTSEN(0) /*!< CTS hardware flow control disabled */
/* USART one sample bit method configure */
#define CTL2_OSB(regval) (BIT(11) & ((uint32_t)(regval) << 11))
#define USART_OSB_1BIT CTL2_OSB(1) /*!< 1 sample bit */
#define USART_OSB_3BIT CTL2_OSB(0) /*!< 3 sample bits */
/* USART driver enable polarity mode */
#define CTL2_DEP(regval) (BIT(15) & ((uint32_t)(regval) << 15))
#define USART_DEP_HIGH CTL2_DEP(0) /*!< DE signal is active high */
#define USART_DEP_LOW CTL2_DEP(1) /*!< DE signal is active low */
/* USART wakeup mode from deep-sleep mode */
#define CTL2_WUM(regval) (BITS(20,21) & ((uint32_t)(regval) << 20))
#define USART_WUM_ADDR CTL2_WUM(0) /*!< WUF active on address match */
#define USART_WUM_STARTB CTL2_WUM(2) /*!< WUF active on start bit */
#define USART_WUM_RBNE CTL2_WUM(3) /*!< WUF active on RBNE */
/* function declarations */
/* initialization functions */
/* reset USART */
void usart_deinit(uint32_t usart_periph);
/* configure USART baud rate value */
void usart_baudrate_set(uint32_t usart_periph, uint32_t baudval);
/* configure USART parity function */
void usart_parity_config(uint32_t usart_periph, uint32_t paritycfg);
/* configure USART word length */
void usart_word_length_set(uint32_t usart_periph, uint32_t wlen);
/* configure USART stop bit length */
void usart_stop_bit_set(uint32_t usart_periph, uint32_t stblen);
/* enable USART */
void usart_enable(uint32_t usart_periph);
/* disable USART */
void usart_disable(uint32_t usart_periph);
/* configure USART transmitter */
void usart_transmit_config(uint32_t usart_periph, uint32_t txconfig);
/* configure USART receiver */
void usart_receive_config(uint32_t usart_periph, uint32_t rxconfig);
/* USART normal mode communication */
/* data is transmitted/received with the LSB/MSB first */
void usart_data_first_config(uint32_t usart_periph, uint32_t msbf);
/* configure USART inverted */
void usart_invert_config(uint32_t usart_periph, usart_invert_enum invertpara);
/* enable the USART overrun function */
void usart_overrun_enable(uint32_t usart_periph);
/* disable the USART overrun function */
void usart_overrun_disable(uint32_t usart_periph);
/* configure the USART oversample mode */
void usart_oversample_config(uint32_t usart_periph, uint32_t oversamp);
/* configure sample bit method */
void usart_sample_bit_config(uint32_t usart_periph, uint32_t osb);
/* enable receiver timeout */
void usart_receiver_timeout_enable(uint32_t usart_periph);
/* disable receiver timeout */
void usart_receiver_timeout_disable(uint32_t usart_periph);
/* configure receiver timeout threshold */
void usart_receiver_timeout_threshold_config(uint32_t usart_periph, uint32_t rtimeout);
/* USART transmit data function */
void usart_data_transmit(uint32_t usart_periph, uint32_t data);
/* USART receive data function */
uint16_t usart_data_receive(uint32_t usart_periph);
/* auto baud rate detection */
/* enable auto baud rate detection */
void usart_autobaud_detection_enable(uint32_t usart_periph);
/* disable auto baud rate detection */
void usart_autobaud_detection_disable(uint32_t usart_periph);
/* configure auto baud rate detection mode */
void usart_autobaud_detection_mode_config(uint32_t usart_periph, uint32_t abdmod);
/* multi-processor communication */
/* configure the address of the USART in wake up by address match mode */
void usart_address_config(uint32_t usart_periph, uint8_t addr);
/* configure address detection mode */
void usart_address_detection_mode_config(uint32_t usart_periph, uint32_t addmod);
/* enable mute mode */
void usart_mute_mode_enable(uint32_t usart_periph);
/* disable mute mode */
void usart_mute_mode_disable(uint32_t usart_periph);
/* configure wakeup method in mute mode */
void usart_mute_mode_wakeup_config(uint32_t usart_periph, uint32_t wmethod);
/* LIN mode communication */
/* enable LIN mode */
void usart_lin_mode_enable(uint32_t usart_periph);
/* disable LIN mode */
void usart_lin_mode_disable(uint32_t usart_periph);
/* configure LIN break frame length */
void usart_lin_break_detection_length_config(uint32_t usart_periph, uint32_t lblen);
/* half-duplex communication */
/* enable half-duplex mode */
void usart_halfduplex_enable(uint32_t usart_periph);
/* disable half-duplex mode */
void usart_halfduplex_disable(uint32_t usart_periph);
/* synchronous communication */
/* enable USART clock */
void usart_clock_enable(uint32_t usart_periph);
/* disable USART clock */
void usart_clock_disable(uint32_t usart_periph);
/* configure USART synchronous mode parameters */
void usart_synchronous_clock_config(uint32_t usart_periph, uint32_t clen, uint32_t cph, uint32_t cpl);
/* smartcard communication */
/* configure guard time value in smartcard mode */
void usart_guard_time_config(uint32_t usart_periph, uint32_t guat);
/* enable smartcard mode */
void usart_smartcard_mode_enable(uint32_t usart_periph);
/* disable smartcard mode */
void usart_smartcard_mode_disable(uint32_t usart_periph);
/* enable NACK in smartcard mode */
void usart_smartcard_mode_nack_enable(uint32_t usart_periph);
/* disable NACK in smartcard mode */
void usart_smartcard_mode_nack_disable(uint32_t usart_periph);
/* enable early NACK in smartcard mode */
void usart_smartcard_mode_early_nack_enable(uint32_t usart_periph);
/* disable early NACK in smartcard mode */
void usart_smartcard_mode_early_nack_disable(uint32_t usart_periph);
/* configure smartcard auto-retry number */
void usart_smartcard_autoretry_config(uint32_t usart_periph, uint32_t scrtnum);
/* configure block length */
void usart_block_length_config(uint32_t usart_periph, uint32_t bl);
/* IrDA communication */
/* enable IrDA mode */
void usart_irda_mode_enable(uint32_t usart_periph);
/* disable IrDA mode */
void usart_irda_mode_disable(uint32_t usart_periph);
/* configure the peripheral clock prescaler in USART IrDA low-power mode or SmartCard mode */
void usart_prescaler_config(uint32_t usart_periph, uint32_t psc);
/* configure IrDA low-power */
void usart_irda_lowpower_config(uint32_t usart_periph, uint32_t irlp);
/* hardware flow communication */
/* configure hardware flow control RTS */
void usart_hardware_flow_rts_config(uint32_t usart_periph, uint32_t rtsconfig);
/* configure hardware flow control CTS */
void usart_hardware_flow_cts_config(uint32_t usart_periph, uint32_t ctsconfig);
/* enable RS485 driver */
void usart_rs485_driver_enable(uint32_t usart_periph);
/* disable RS485 driver */
void usart_rs485_driver_disable(uint32_t usart_periph);
/* configure driver enable assertion time */
void usart_driver_assertime_config(uint32_t usart_periph, uint32_t deatime);
/* configure driver enable de-assertion time */
void usart_driver_deassertime_config(uint32_t usart_periph, uint32_t dedtime);
/* configure driver enable polarity mode */
void usart_depolarity_config(uint32_t usart_periph, uint32_t dep);
/* USART DMA */
/* configure USART DMA for reception */
void usart_dma_receive_config(uint32_t usart_periph, uint32_t dmacmd);
/* configure USART DMA for transmission */
void usart_dma_transmit_config(uint32_t usart_periph, uint32_t dmacmd);
/* disable DMA on reception error */
void usart_reception_error_dma_disable(uint32_t usart_periph);
/* enable DMA on reception error */
void usart_reception_error_dma_enable(uint32_t usart_periph);
/* enable USART to wakeup the mcu from deep-sleep mode */
void usart_wakeup_enable(uint32_t usart_periph);
/* disable USART to wakeup the mcu from deep-sleep mode */
void usart_wakeup_disable(uint32_t usart_periph);
/* configure the USART wakeup mode from deep-sleep mode */
void usart_wakeup_mode_config(uint32_t usart_periph, uint32_t wum);
/* enable USART command */
void usart_command_enable(uint32_t usart_periph, uint32_t cmdtype);
/* USART receive FIFO */
/* enable receive FIFO */
void usart_receive_fifo_enable(uint32_t usart_periph);
/* disable receive FIFO */
void usart_receive_fifo_disable(uint32_t usart_periph);
/* read receive FIFO counter number */
uint8_t usart_receive_fifo_counter_number(uint32_t usart_periph);
/* flag & interrupt functions */
/* get flag in STAT/RFCS register */
FlagStatus usart_flag_get(uint32_t usart_periph, usart_flag_enum flag);
/* clear flag in STAT register */
void usart_flag_clear(uint32_t usart_periph, usart_flag_enum flag);
/* enable USART interrupt */
void usart_interrupt_enable(uint32_t usart_periph, usart_interrupt_enum interrupt);
/* disable USART interrupt */
void usart_interrupt_disable(uint32_t usart_periph, usart_interrupt_enum interrupt);
/* get USART interrupt and flag status */
FlagStatus usart_interrupt_flag_get(uint32_t usart_periph, usart_interrupt_flag_enum int_flag);
/* clear USART interrupt flag */
void usart_interrupt_flag_clear(uint32_t usart_periph, usart_interrupt_flag_enum int_flag);
#endif /* GD32F3X0_USART_H */