libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/lm4f232/Libraries/inc/hw_fan.h

637 lines
34 KiB
C
Raw Normal View History

Re-normalizing the repo
2013-01-08 22:40:58 +08:00
//*****************************************************************************
//
// hw_fan.h - Macros used when accessing the fan control hardware.
//
// Copyright (c) 2010-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_FAN_H__
#define __HW_FAN_H__
//*****************************************************************************
//
// The following are defines for the Fan Control register offsets.
//
//*****************************************************************************
#define FAN_O_STS 0x00000000 // FAN Status
#define FAN_O_CTL 0x00000004 // FAN Control
#define FAN_O_CH0 0x00000010 // FAN Channel Command
#define FAN_O_CMD0 0x00000014 // FAN Channel Command
#define FAN_O_CST0 0x00000018 // FAN Channel Status
#define FAN_O_CH1 0x00000020 // FAN Channel Setup
#define FAN_O_CMD1 0x00000024 // FAN Channel Command
#define FAN_O_CST1 0x00000028 // FAN Channel Status
#define FAN_O_CH2 0x00000030 // FAN Channel Setup
#define FAN_O_CMD2 0x00000034 // FAN Channel Command
#define FAN_O_CST2 0x00000038 // FAN Channel Status
#define FAN_O_CH3 0x00000040 // FAN Channel Setup
#define FAN_O_CMD3 0x00000044 // FAN Channel Command
#define FAN_O_CST3 0x00000048 // FAN Channel Status
#define FAN_O_CH4 0x00000050 // FAN Channel Setup
#define FAN_O_CMD4 0x00000054 // FAN Channel Command
#define FAN_O_CST4 0x00000058 // FAN Channel Status
#define FAN_O_CH5 0x00000060 // FAN Channel Setup
#define FAN_O_CMD5 0x00000064 // FAN Channel Command
#define FAN_O_CST5 0x00000068 // FAN Channel Status
#define FAN_O_CH6 0x00000070 // FAN Channel Setup
#define FAN_O_CMD6 0x00000074 // FAN Channel Command
#define FAN_O_CST6 0x00000078 // FAN Channel Status
#define FAN_O_CH7 0x00000080 // FAN Channel Setup
#define FAN_O_CMD7 0x00000084 // FAN Channel Command
#define FAN_O_CST7 0x00000088 // FAN Channel Status
#define FAN_O_IM 0x00000090 // FAN Interrupt Mask
#define FAN_O_RIS 0x00000094 // FAN Raw Interrupt Status
#define FAN_O_MIS 0x00000098 // FAN Masked Interrupt Status
#define FAN_O_IC 0x0000009C // FAN Interrupt Clear
#define FAN_O_PP 0x00000FC0 // FAN Peripheral Properties
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_STS register.
//
//*****************************************************************************
#define FAN_STS_FANCNT_M 0x000F0000 // Fan Count
#define FAN_STS_ST5_M 0x00000C00 // Fan 5 Status
#define FAN_STS_ST5_STALLED 0x00000000 // Stalled
#define FAN_STS_ST5_CHANGING 0x00000400 // Changing
#define FAN_STS_ST5_LOCKED 0x00000800 // Locked
#define FAN_STS_ST5_UNBALANCED 0x00000C00 // Unbalanced Spin
#define FAN_STS_ST4_M 0x00000300 // Fan 4 Status
#define FAN_STS_ST3_M 0x000000C0 // Fan 3 Status
#define FAN_STS_ST2_M 0x00000030 // Fan 2 Status
#define FAN_STS_ST1_M 0x0000000C // Fan 1 Status
#define FAN_STS_ST0_M 0x00000003 // Fan 0 Status
#define FAN_STS_FANCNT_S 16
#define FAN_STS_ST4_S 8
#define FAN_STS_ST3_S 6
#define FAN_STS_ST2_S 4
#define FAN_STS_ST1_S 2
#define FAN_STS_ST0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CTL register.
//
//*****************************************************************************
#define FAN_CTL_E5 0x00000020 // Fan 5 Enable
#define FAN_CTL_E4 0x00000010 // Fan 4 Enable
#define FAN_CTL_E3 0x00000008 // Fan 3 Enable
#define FAN_CTL_E2 0x00000004 // Fan 2 Enable
#define FAN_CTL_E1 0x00000002 // Fan 1 Enable
#define FAN_CTL_E0 0x00000001 // Fan 0 Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH0 register.
//
//*****************************************************************************
#define FAN_CH0_ASTART 0x00008000 // Auto Restart
#define FAN_CH0_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH0_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH0_STPER_M 0x00000700 // Start Period
#define FAN_CH0_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH0_START_NOFAST 0x00000000 // No fast start
#define FAN_CH0_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH0_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH0_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH0_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH0_AVG_0 0x00000000 // No averaging
#define FAN_CH0_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH0_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH0_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH0_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH0_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH0_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH0_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH0_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH0_MAN 0x00000001 // Control Type
#define FAN_CH0_HYST_S 11
#define FAN_CH0_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD0 register.
//
//*****************************************************************************
#define FAN_CMD0_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD0_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD0_DC_S 16
#define FAN_CMD0_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST0 register.
//
//*****************************************************************************
#define FAN_CST0_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST0_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST0_COUNT_S 16
#define FAN_CST0_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH1 register.
//
//*****************************************************************************
#define FAN_CH1_ASTART 0x00008000 // Auto Restart
#define FAN_CH1_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH1_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH1_STPER_M 0x00000700 // Start Period
#define FAN_CH1_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH1_START_NOFAST 0x00000000 // No fast start
#define FAN_CH1_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH1_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH1_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH1_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH1_AVG_0 0x00000000 // No averaging
#define FAN_CH1_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH1_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH1_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH1_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH1_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH1_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH1_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH1_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH1_MAN 0x00000001 // Control Type
#define FAN_CH1_HYST_S 11
#define FAN_CH1_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD1 register.
//
//*****************************************************************************
#define FAN_CMD1_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD1_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD1_DC_S 16
#define FAN_CMD1_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST1 register.
//
//*****************************************************************************
#define FAN_CST1_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST1_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST1_COUNT_S 16
#define FAN_CST1_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH2 register.
//
//*****************************************************************************
#define FAN_CH2_ASTART 0x00008000 // Auto Restart
#define FAN_CH2_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH2_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH2_STPER_M 0x00000700 // Start Period
#define FAN_CH2_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH2_START_NOFAST 0x00000000 // No fast start
#define FAN_CH2_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH2_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH2_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH2_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH2_AVG_0 0x00000000 // No averaging
#define FAN_CH2_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH2_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH2_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH2_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH2_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH2_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH2_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH2_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH2_MAN 0x00000001 // Control Type
#define FAN_CH2_HYST_S 11
#define FAN_CH2_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD2 register.
//
//*****************************************************************************
#define FAN_CMD2_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD2_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD2_DC_S 16
#define FAN_CMD2_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST2 register.
//
//*****************************************************************************
#define FAN_CST2_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST2_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST2_COUNT_S 16
#define FAN_CST2_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH3 register.
//
//*****************************************************************************
#define FAN_CH3_ASTART 0x00008000 // Auto Restart
#define FAN_CH3_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH3_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH3_STPER_M 0x00000700 // Start Period
#define FAN_CH3_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH3_START_NOFAST 0x00000000 // No fast start
#define FAN_CH3_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH3_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH3_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH3_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH3_AVG_0 0x00000000 // No averaging
#define FAN_CH3_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH3_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH3_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH3_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH3_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH3_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH3_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH3_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH3_MAN 0x00000001 // Control Type
#define FAN_CH3_HYST_S 11
#define FAN_CH3_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD3 register.
//
//*****************************************************************************
#define FAN_CMD3_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD3_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD3_DC_S 16
#define FAN_CMD3_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST3 register.
//
//*****************************************************************************
#define FAN_CST3_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST3_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST3_COUNT_S 16
#define FAN_CST3_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH4 register.
//
//*****************************************************************************
#define FAN_CH4_ASTART 0x00008000 // Auto Restart
#define FAN_CH4_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH4_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH4_STPER_M 0x00000700 // Start Period
#define FAN_CH4_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH4_START_NOFAST 0x00000000 // No fast start
#define FAN_CH4_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH4_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH4_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH4_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH4_AVG_0 0x00000000 // No averaging
#define FAN_CH4_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH4_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH4_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH4_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH4_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH4_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH4_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH4_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH4_MAN 0x00000001 // Control Type
#define FAN_CH4_HYST_S 11
#define FAN_CH4_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD4 register.
//
//*****************************************************************************
#define FAN_CMD4_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD4_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD4_DC_S 16
#define FAN_CMD4_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST4 register.
//
//*****************************************************************************
#define FAN_CST4_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST4_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST4_COUNT_S 16
#define FAN_CST4_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH5 register.
//
//*****************************************************************************
#define FAN_CH5_ASTART 0x00008000 // Auto Restart
#define FAN_CH5_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH5_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH5_STPER_M 0x00000700 // Start Period
#define FAN_CH5_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH5_START_NOFAST 0x00000000 // No fast start
#define FAN_CH5_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH5_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH5_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH5_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH5_AVG_0 0x00000000 // No averaging
#define FAN_CH5_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH5_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH5_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH5_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH5_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH5_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH5_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH5_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH5_MAN 0x00000001 // Control Type
#define FAN_CH5_HYST_S 11
#define FAN_CH5_STPER_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD5 register.
//
//*****************************************************************************
#define FAN_CMD5_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD5_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD5_DC_S 16
#define FAN_CMD5_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST5 register.
//
//*****************************************************************************
#define FAN_CST5_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST5_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST5_COUNT_S 16
#define FAN_CST5_RPM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH6 register.
//
//*****************************************************************************
#define FAN_CH6_MAN 0x00000001 // Control Type
#define FAN_CH6_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH6_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH6_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH6_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH6_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH6_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH6_AVG_0 0x00000000 // No averaging
#define FAN_CH6_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH6_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH6_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH6_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH6_START_NOFAST 0x00000000 // No fast start
#define FAN_CH6_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH6_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH6_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH6_STPER_M 0x00000700 // Start Period
#define FAN_CH6_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH6_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH6_ASTART 0x00008000 // Auto Restart
#define FAN_CH6_STPER_S 8
#define FAN_CH6_HYST_S 11
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD6 register.
//
//*****************************************************************************
#define FAN_CMD6_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD6_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD6_RPM_S 0
#define FAN_CMD6_DC_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST6 register.
//
//*****************************************************************************
#define FAN_CST6_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST6_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST6_RPM_S 0
#define FAN_CST6_COUNT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CH7 register.
//
//*****************************************************************************
#define FAN_CH7_MAN 0x00000001 // Control Type
#define FAN_CH7_PPR_M 0x0000000C // Pulse per Revolution on
// Tachometer
#define FAN_CH7_PPR_1 0x00000000 // 1 pulse per revolution
#define FAN_CH7_PPR_2 0x00000004 // 2 pulses per revolution
#define FAN_CH7_PPR_4 0x00000008 // 4 pulses per revolution
#define FAN_CH7_PPR_8 0x0000000C // 8 pulses per revolution
#define FAN_CH7_AVG_M 0x00000030 // Averaging of Tachometer
#define FAN_CH7_AVG_0 0x00000000 // No averaging
#define FAN_CH7_AVG_2 0x00000010 // Average 2 edges
#define FAN_CH7_AVG_4 0x00000020 // Average 4 edges
#define FAN_CH7_AVG_8 0x00000030 // Average 8 edges
#define FAN_CH7_START_M 0x000000C0 // Fast Start Rule
#define FAN_CH7_START_NOFAST 0x00000000 // No fast start
#define FAN_CH7_START_50DC 0x00000040 // 50% duty cycle
#define FAN_CH7_START_75DC 0x00000080 // 75% duty cycle
#define FAN_CH7_START_100DC 0x000000C0 // 100% duty cycle
#define FAN_CH7_STPER_M 0x00000700 // Start Period
#define FAN_CH7_HYST_M 0x00003800 // Hysteresis Adjustment on PID
// Adjust
#define FAN_CH7_ACCEL 0x00004000 // Acceleration and Deceleration
// Rule
#define FAN_CH7_ASTART 0x00008000 // Auto Restart
#define FAN_CH7_STPER_S 8
#define FAN_CH7_HYST_S 11
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CMD7 register.
//
//*****************************************************************************
#define FAN_CMD7_RPM_M 0x00001FFF // Fan Speed (in RPM)
#define FAN_CMD7_DC_M 0x01FF0000 // PWM Duty Cycle
#define FAN_CMD7_RPM_S 0
#define FAN_CMD7_DC_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_CST7 register.
//
//*****************************************************************************
#define FAN_CST7_RPM_M 0x00001FFF // Last Read RPM Speed Computed
#define FAN_CST7_COUNT_M 0x07FF0000 // Last Read Tachometer Count
#define FAN_CST7_RPM_S 0
#define FAN_CST7_COUNT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_IM register.
//
//*****************************************************************************
#define FAN_IM_C5INT1IM 0x00400000 // Channel 5 Interrupt 1 Mask
#define FAN_IM_C5INT0IM 0x00200000 // Channel 5 Interrupt 0 Mask
#define FAN_IM_C5STALLIM 0x00100000 // Channel 5 Stall Interrupt Mask
#define FAN_IM_C4INT1IM 0x00040000 // Channel 4 Interrupt 1 Mask
#define FAN_IM_C4INT0IM 0x00020000 // Channel 4 Interrupt 0 Mask
#define FAN_IM_C4STALLIM 0x00010000 // Channel 4 Stall Interrupt Mask
#define FAN_IM_C3INT1IM 0x00004000 // Channel 3 Interrupt 1 Mask
#define FAN_IM_C3INT0IM 0x00002000 // Channel 3 Interrupt 0 Mask
#define FAN_IM_C3STALLIM 0x00001000 // Channel 3 Stall Interrupt Mask
#define FAN_IM_C2INT1IM 0x00000400 // Channel 2 Interrupt 1 Mask
#define FAN_IM_C2INT0IM 0x00000200 // Channel 2 Interrupt 0 Mask
#define FAN_IM_C2STALLIM 0x00000100 // Channel 2 Stall Interrupt Mask
#define FAN_IM_C1INT1IM 0x00000040 // Channel 1 Interrupt 1 Mask
#define FAN_IM_C1INT0IM 0x00000020 // Channel 1 Interrupt 0 Mask
#define FAN_IM_C1STALLIM 0x00000010 // Channel 1 Stall Interrupt Mask
#define FAN_IM_C0INT1IM 0x00000004 // Channel 0 Interrupt 1 Mask
#define FAN_IM_C0INT0IM 0x00000002 // Channel 0 Interrupt 0 Mask
#define FAN_IM_C0STALLIM 0x00000001 // Channel 0 Stall Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_RIS register.
//
//*****************************************************************************
#define FAN_RIS_C5INT1RIS 0x00400000 // Channel 5 Raw Interrupt 1 Status
#define FAN_RIS_C5INT0RIS 0x00200000 // Channel 5 Raw Interrupt 0 Status
#define FAN_RIS_C5STALLRIS 0x00100000 // Channel 5 Raw Stall Interrupt
// Status
#define FAN_RIS_C4INT1RIS 0x00040000 // Channel 4 Raw Interrupt 1 Status
#define FAN_RIS_C4INT0RIS 0x00020000 // Channel 4 Raw Interrupt 0 Status
#define FAN_RIS_C4STALLRIS 0x00010000 // Channel 4 Raw Stall Interrupt
// Status
#define FAN_RIS_C3INT1RIS 0x00004000 // Channel 3 Raw Interrupt 1 Status
#define FAN_RIS_C3INT0RIS 0x00002000 // Channel 3 Raw Interrupt 0 Status
#define FAN_RIS_C3STALLRIS 0x00001000 // Channel 3 Raw Stall Interrupt
// Status
#define FAN_RIS_C2INT1RIS 0x00000400 // Channel 2 Raw Interrupt 1 Status
#define FAN_RIS_C2INT0RIS 0x00000200 // Channel 2 Raw Interrupt 0 Status
#define FAN_RIS_C2STALLRIS 0x00000100 // Channel 2 Raw Stall Interrupt
// Status
#define FAN_RIS_C1INT1RIS 0x00000040 // Channel 1 Raw Interrupt 1 Status
#define FAN_RIS_C1INT0RIS 0x00000020 // Channel 1 Raw Interrupt 0 Status
#define FAN_RIS_C1STALLRIS 0x00000010 // Channel 1 Raw Stall Interrupt
// Status
#define FAN_RIS_C0INT1RIS 0x00000004 // Channel 0 Raw Interrupt 1 Status
#define FAN_RIS_C0INT0RIS 0x00000002 // Channel 0 Raw Interrupt 0 Status
#define FAN_RIS_C0STALLRIS 0x00000001 // Channel 0 Raw Stall Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_MIS register.
//
//*****************************************************************************
#define FAN_MIS_C5INT1MIS 0x00400000 // Channel 5 Masked Interrupt 1
// Status
#define FAN_MIS_C5INT0MIS 0x00200000 // Channel 5 Masked Interrupt 0
// Status
#define FAN_MIS_C5STALLMIS 0x00100000 // Channel 5 Masked Stall Interrupt
// Status
#define FAN_MIS_C54NT1MIS 0x00040000 // Channel 4 Masked Interrupt 1
// Status
#define FAN_MIS_C4INT0MIS 0x00020000 // Channel 4 Masked Interrupt 0
// Status
#define FAN_MIS_C4STALLMIS 0x00010000 // Channel 4 Masked Stall Interrupt
// Status
#define FAN_MIS_C3INT1MIS 0x00004000 // Channel 3 Masked Interrupt 1
// Status
#define FAN_MIS_C3INT0MIS 0x00002000 // Channel 3 Masked Interrupt 0
// Status
#define FAN_MIS_C3STALLMIS 0x00001000 // Channel 3 Masked Stall Interrupt
// Status
#define FAN_MIS_C2INT1MIS 0x00000400 // Channel 2 Masked Interrupt 1
// Status
#define FAN_MIS_C2INT0MIS 0x00000200 // Channel 2 Masked Interrupt 0
// Status
#define FAN_MIS_C2STALLMIS 0x00000100 // Channel 2 Masked Stall Interrupt
// Status
#define FAN_MIS_C1INT1MIS 0x00000040 // Channel 1 Masked Interrupt 1
// Status
#define FAN_MIS_C1INT0MIS 0x00000020 // Channel 1 Masked Interrupt 0
// Status
#define FAN_MIS_C1STALLMIS 0x00000010 // Channel 1 Masked Stall Interrupt
// Status
#define FAN_MIS_C0INT1MIS 0x00000004 // Channel 0 Masked Interrupt 1
// Status
#define FAN_MIS_C0INT0MIS 0x00000002 // Channel 0 Masked Interrupt 0
// Status
#define FAN_MIS_C0STALLMIS 0x00000001 // Channel 0 Masked Stall Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_IC register.
//
//*****************************************************************************
#define FAN_IC_C5INT1IC 0x00400000 // Channel 5 Interrupt 1 Clear
#define FAN_IC_C5INT0IC 0x00200000 // Channel 5 Interrupt 0 Clear
#define FAN_IC_C5STALLIC 0x00100000 // Channel 5 Stall Interrupt Clear
#define FAN_IC_C4INT1IC 0x00040000 // Channel 4 Interrupt 1 Clear
#define FAN_IC_C4INT0IC 0x00020000 // Channel 4 Interrupt 0 Clear
#define FAN_IC_C4STALLIC 0x00010000 // Channel 4 Stall Interrupt Clear
#define FAN_IC_C3INT1IC 0x00004000 // Channel 3 Interrupt 1 Clear
#define FAN_IC_C53INT0IC 0x00002000 // Channel 3 Interrupt 0 Clear
#define FAN_IC_C3STALLIC 0x00001000 // Channel 3 Stall Interrupt Clear
#define FAN_IC_C2INT1IC 0x00000400 // Channel 2 Interrupt 1 Clear
#define FAN_IC_C2INT0IC 0x00000200 // Channel 2 Interrupt 0 Clear
#define FAN_IC_C2STALLIC 0x00000100 // Channel 2 Stall Interrupt Clear
#define FAN_IC_C1INT1IC 0x00000040 // Channel 1 Interrupt 1 Clear
#define FAN_IC_C1INT0IC 0x00000020 // Channel 1 Interrupt 0 Clear
#define FAN_IC_C1STALLIC 0x00000010 // Channel 1 Stall Interrupt Clear
#define FAN_IC_C0INT1IC 0x00000004 // Channel 0 Interrupt 1 Clear
#define FAN_IC_C0INT0IC 0x00000002 // Channel 0 Interrupt 0 Clear
#define FAN_IC_C0STALLIC 0x00000001 // Channel 0 Stall Interrupt Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the FAN_O_PP register.
//
//*****************************************************************************
#define FAN_PP_CHAN_M 0x0000000F // Channel Count
#define FAN_PP_CHAN_S 0
#endif // __HW_FAN_H__