rt-thread-official/bsp/at91sam9260/platform/at91_serial.h

/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2011-01-13     weety      first version
 */

#ifndef AT91_SERIAL_H
#define AT91_SERIAL_H

#ifdef __cplusplus
extern "C" {
#endif

#define AT91_US_CR      0x00            /* Control Register */
#define     AT91_US_RSTRX       (1 <<  2)       /* Reset Receiver */
#define     AT91_US_RSTTX       (1 <<  3)       /* Reset Transmitter */
#define     AT91_US_RXEN        (1 <<  4)       /* Receiver Enable */
#define     AT91_US_RXDIS       (1 <<  5)       /* Receiver Disable */
#define     AT91_US_TXEN        (1 <<  6)       /* Transmitter Enable */
#define     AT91_US_TXDIS       (1 <<  7)       /* Transmitter Disable */
#define     AT91_US_RSTSTA      (1 <<  8)       /* Reset Status Bits */
#define     AT91_US_STTBRK      (1 <<  9)       /* Start Break */
#define     AT91_US_STPBRK      (1 << 10)       /* Stop Break */
#define     AT91_US_STTTO       (1 << 11)       /* Start Time-out */
#define     AT91_US_SENDA       (1 << 12)       /* Send Address */
#define     AT91_US_RSTIT       (1 << 13)       /* Reset Iterations */
#define     AT91_US_RSTNACK (1 << 14)       /* Reset Non Acknowledge */
#define     AT91_US_RETTO       (1 << 15)       /* Rearm Time-out */
#define     AT91_US_DTREN       (1 << 16)       /* Data Terminal Ready Enable [AT91RM9200 only] */
#define     AT91_US_DTRDIS      (1 << 17)       /* Data Terminal Ready Disable [AT91RM9200 only] */
#define     AT91_US_RTSEN       (1 << 18)       /* Request To Send Enable */
#define     AT91_US_RTSDIS      (1 << 19)       /* Request To Send Disable */

#define AT91_US_MR      0x04            /* Mode Register */
#define     AT91_US_USMODE      (0xf <<  0)     /* Mode of the USART */
#define         AT91_US_USMODE_NORMAL       0
#define         AT91_US_USMODE_RS485        1
#define         AT91_US_USMODE_HWHS     2
#define         AT91_US_USMODE_MODEM        3
#define         AT91_US_USMODE_ISO7816_T0   4
#define         AT91_US_USMODE_ISO7816_T1   6
#define         AT91_US_USMODE_IRDA     8
#define     AT91_US_USCLKS      (3   <<  4)     /* Clock Selection */
#define         AT91_US_USCLKS_MCK      (0 <<  4)
#define         AT91_US_USCLKS_MCK_DIV8 (1 <<  4)
#define         AT91_US_USCLKS_SCK      (3 <<  4)
#define     AT91_US_CHRL        (3   <<  6)     /* Character Length */
#define         AT91_US_CHRL_5          (0 <<  6)
#define         AT91_US_CHRL_6          (1 <<  6)
#define         AT91_US_CHRL_7          (2 <<  6)
#define         AT91_US_CHRL_8          (3 <<  6)
#define     AT91_US_SYNC        (1 <<  8)       /* Synchronous Mode Select */
#define     AT91_US_PAR     (7 <<  9)       /* Parity Type */
#define         AT91_US_PAR_EVEN        (0 <<  9)
#define         AT91_US_PAR_ODD     (1 <<  9)
#define         AT91_US_PAR_SPACE       (2 <<  9)
#define         AT91_US_PAR_MARK        (3 <<  9)
#define         AT91_US_PAR_NONE        (4 <<  9)
#define         AT91_US_PAR_MULTI_DROP      (6 <<  9)
#define     AT91_US_NBSTOP      (3 << 12)       /* Number of Stop Bits */
#define         AT91_US_NBSTOP_1        (0 << 12)
#define         AT91_US_NBSTOP_1_5      (1 << 12)
#define         AT91_US_NBSTOP_2        (2 << 12)
#define     AT91_US_CHMODE      (3 << 14)       /* Channel Mode */
#define         AT91_US_CHMODE_NORMAL       (0 << 14)
#define         AT91_US_CHMODE_ECHO     (1 << 14)
#define         AT91_US_CHMODE_LOC_LOOP (2 << 14)
#define         AT91_US_CHMODE_REM_LOOP (3 << 14)
#define     AT91_US_MSBF        (1 << 16)       /* Bit Order */
#define     AT91_US_MODE9       (1 << 17)       /* 9-bit Character Length */
#define     AT91_US_CLKO        (1 << 18)       /* Clock Output Select */
#define     AT91_US_OVER        (1 << 19)       /* Oversampling Mode */
#define     AT91_US_INACK       (1 << 20)       /* Inhibit Non Acknowledge */
#define     AT91_US_DSNACK      (1 << 21)       /* Disable Successive NACK */
#define     AT91_US_MAX_ITER    (7 << 24)       /* Max Iterations */
#define     AT91_US_FILTER      (1 << 28)       /* Infrared Receive Line Filter */

#define AT91_US_IER     0x08            /* Interrupt Enable Register */
#define     AT91_US_RXRDY       (1 <<  0)       /* Receiver Ready */
#define     AT91_US_TXRDY       (1 <<  1)       /* Transmitter Ready */
#define     AT91_US_RXBRK       (1 <<  2)       /* Break Received / End of Break */
#define     AT91_US_ENDRX       (1 <<  3)       /* End of Receiver Transfer */
#define     AT91_US_ENDTX       (1 <<  4)       /* End of Transmitter Transfer */
#define     AT91_US_OVRE        (1 <<  5)       /* Overrun Error */
#define     AT91_US_FRAME       (1 <<  6)       /* Framing Error */
#define     AT91_US_PARE        (1 <<  7)       /* Parity Error */
#define     AT91_US_TIMEOUT (1 <<  8)       /* Receiver Time-out */
#define     AT91_US_TXEMPTY (1 <<  9)       /* Transmitter Empty */
#define     AT91_US_ITERATION   (1 << 10)       /* Max number of Repetitions Reached */
#define     AT91_US_TXBUFE      (1 << 11)       /* Transmission Buffer Empty */
#define     AT91_US_RXBUFF      (1 << 12)       /* Reception Buffer Full */
#define     AT91_US_NACK        (1 << 13)       /* Non Acknowledge */
#define     AT91_US_RIIC        (1 << 16)       /* Ring Indicator Input Change [AT91RM9200 only] */
#define     AT91_US_DSRIC       (1 << 17)       /* Data Set Ready Input Change [AT91RM9200 only] */
#define     AT91_US_DCDIC       (1 << 18)       /* Data Carrier Detect Input Change [AT91RM9200 only] */
#define     AT91_US_CTSIC       (1 << 19)       /* Clear to Send Input Change */
#define     AT91_US_RI      (1 << 20)       /* RI */
#define     AT91_US_DSR     (1 << 21)       /* DSR */
#define     AT91_US_DCD     (1 << 22)       /* DCD */
#define     AT91_US_CTS     (1 << 23)       /* CTS */

#define AT91_US_IDR     0x0c            /* Interrupt Disable Register */
#define AT91_US_IMR     0x10            /* Interrupt Mask Register */
#define AT91_US_CSR     0x14            /* Channel Status Register */
#define AT91_US_RHR     0x18            /* Receiver Holding Register */
#define AT91_US_THR     0x1c            /* Transmitter Holding Register */
#define     AT91_US_SYNH        (1 << 15)       /* Transmit/Receive Sync [AT91SAM9261 only] */

#define AT91_US_BRGR        0x20            /* Baud Rate Generator Register */
#define     AT91_US_CD      (0xffff << 0)       /* Clock Divider */

#define AT91_US_RTOR        0x24            /* Receiver Time-out Register */
#define     AT91_US_TO      (0xffff << 0)       /* Time-out Value */

#define AT91_US_TTGR        0x28            /* Transmitter Timeguard Register */
#define     AT91_US_TG      (0xff << 0)     /* Timeguard Value */

#define AT91_US_FIDI        0x40            /* FI DI Ratio Register */
#define AT91_US_NER     0x44            /* Number of Errors Register */
#define AT91_US_IF      0x4c            /* IrDA Filter Register */

#ifdef __cplusplus
}
#endif

#endif