libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/gd32450z-eval/Libraries/GD32F4xx_standard_peripheral/Source/gd32f4xx_exmc.c

1139 lines
48 KiB
C
Raw Normal View History

add gd32f450 bsp
2017-08-22 15:52:57 +08:00
/*!
\file gd32f4xx_exmc.c
\brief EXMC driver
*/
/*
Copyright (C) 2016 GigaDevice
2016-08-15, V1.0.0, firmware for GD32F4xx
*/
#include "gd32f4xx_exmc.h"
/* EXMC bank0 register reset value */
#define BANK0_SNCTL_REGION_RESET ((uint32_t)0x000030DAU)
#define BANK0_SNTCFG_RESET ((uint32_t)0x0FFFFFFFU)
#define BANK0_SNWTCFG_RESET ((uint32_t)0x0FFFFFFFU)
/* EXMC bank1/2 register reset mask*/
#define BANK1_2_NPCTL_RESET ((uint32_t)0x00000018U)
#define BANK1_2_NPINTEN_RESET ((uint32_t)0x00000040U)
#define BANK1_2_NPCTCFG_RESET ((uint32_t)0xFCFCFCFCU)
#define BANK1_2_NPATCFG_RESET ((uint32_t)0xFCFCFCFCU)
/* EXMC bank3 register reset mask*/
#define BANK3_NPCTL_RESET ((uint32_t)0x00000018U)
#define BANK3_NPINTEN_RESET ((uint32_t)0x00000000U)
#define BANK3_NPCTCFG_RESET ((uint32_t)0xFCFCFCFCU)
#define BANK3_NPATCFG_RESET ((uint32_t)0xFCFCFCFCU)
#define BANK3_PIOTCFG3_RESET ((uint32_t)0xFCFCFCFCU)
/* EXMC SDRAM device register reset mask */
#define SDRAM_DEVICE_SDCTL_RESET ((uint32_t)0x000002D0U)
#define SDRAM_DEVICE_SDTCFG_RESET ((uint32_t)0x0FFFFFFFU)
#define SDRAM_DEVICE_SDCMD_RESET ((uint32_t)0x00000000U)
#define SDRAM_DEVICE_SDARI_RESET ((uint32_t)0x00000000U)
#define SDRAM_DEVICE_SDSTAT_RESET ((uint32_t)0x00000000U)
#define SDRAM_DEVICE_SDRSCTL_RESET ((uint32_t)0x00000000U)
/* EXMC bank0 SQPI-PSRAM register reset mask */
#define BANK0_SQPI_SINIT_RESET ((uint32_t)0x18010000U)
#define BANK0_SQPI_SRCMD_RESET ((uint32_t)0x00000000U)
#define BANK0_SQPI_SWCMD_RESET ((uint32_t)0x00000000U)
#define BANK0_SQPI_SIDL_RESET ((uint32_t)0x00000000U)
#define BANK0_SQPI_SIDH_RESET ((uint32_t)0x00000000U)
/* EXMC register bit offset */
#define SNCTL_NRMUX_OFFSET ((uint32_t)1U)
#define SNCTL_SBRSTEN_OFFSET ((uint32_t)8U)
#define SNCTL_WRAPEN_OFFSET ((uint32_t)10U)
#define SNCTL_WREN_OFFSET ((uint32_t)12U)
#define SNCTL_NRWTEN_OFFSET ((uint32_t)13U)
#define SNCTL_EXMODEN_OFFSET ((uint32_t)14U)
#define SNCTL_ASYNCWAIT_OFFSET ((uint32_t)15U)
#define SNTCFG_AHLD_OFFSET ((uint32_t)4U)
#define SNTCFG_DSET_OFFSET ((uint32_t)8U)
#define SNTCFG_BUSLAT_OFFSET ((uint32_t)16U)
#define NPCTL_NDWTEN_OFFSET ((uint32_t)1U)
#define NPCTL_ECCEN_OFFSET ((uint32_t)6U)
#define NPCTCFG_COMWAIT_OFFSET ((uint32_t)8U)
#define NPCTCFG_COMHLD_OFFSET ((uint32_t)16U)
#define NPCTCFG_COMHIZ_OFFSET ((uint32_t)24U)
#define NPATCFG_COMWAIT_OFFSET ((uint32_t)8U)
#define NPATCFG_COMHLD_OFFSET ((uint32_t)16U)
#define NPATCFG_COMHIZ_OFFSET ((uint32_t)24U)
#define PIOTCFG_COMWAIT_OFFSET ((uint32_t)8U)
#define PIOTCFG_COMHLD_OFFSET ((uint32_t)16U)
#define PIOTCFG_COMHIZ_OFFSET ((uint32_t)24U)
#define SDCTL_WPEN_OFFSET ((uint32_t)9U)
#define SDCTL_BRSTRD_OFFSET ((uint32_t)12U)
#define SDTCFG_XSRD_OFFSET ((uint32_t)4U)
#define SDTCFG_RASD_OFFSET ((uint32_t)8U)
#define SDTCFG_ARFD_OFFSET ((uint32_t)12U)
#define SDTCFG_WRD_OFFSET ((uint32_t)16U)
#define SDTCFG_RPD_OFFSET ((uint32_t)20U)
#define SDTCFG_RCD_OFFSET ((uint32_t)24U)
#define SDCMD_NARF_OFFSET ((uint32_t)5U)
#define SDCMD_MRC_OFFSET ((uint32_t)9U)
#define SDARI_ARINTV_OFFSET ((uint32_t)1U)
#define SDRSCTL_SSCR_OFFSET ((uint32_t)1U)
#define SDRSCTL_SDSC_OFFSET ((uint32_t)4U)
#define SDSTAT_STA0_OFFSET ((uint32_t)1U)
#define SDSTAT_STA1_OFFSET ((uint32_t)3U)
#define SRCMD_RWAITCYCLE_OFFSET ((uint32_t)16U)
#define SWCMD_WWAITCYCLE_OFFSET ((uint32_t)16U)
#define INTEN_INTEN_OFFSET ((uint32_t)3U)
/*!
\brief deinitialize EXMC NOR/SRAM region
\param[in] exmc_norsram_region: select the region of bank0
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3)
\param[out] none
\retval none
*/
void exmc_norsram_deinit(uint32_t exmc_norsram_region)
{
/* reset the registers */
EXMC_SNCTL(exmc_norsram_region) = BANK0_SNCTL_REGION_RESET;
EXMC_SNTCFG(exmc_norsram_region) = BANK0_SNTCFG_RESET;
EXMC_SNWTCFG(exmc_norsram_region) = BANK0_SNWTCFG_RESET;
}
/*!
\brief initialize EXMC NOR/SRAM region
\param[in] exmc_norsram_parameter_struct: configure the EXMC NOR/SRAM parameter
norsram_region: EXMC_BANK0_NORSRAM_REGIONx,x=0..3
write_mode: EXMC_ASYN_WRITE,EXMC_SYN_WRITE
extended_mode: ENABLE or DISABLE
asyn_wait: ENABLE or DISABLE
nwait_signal: ENABLE or DISABLE
memory_write: ENABLE or DISABLE
nwait_config: EXMC_NWAIT_CONFIG_BEFORE,EXMC_NWAIT_CONFIG_DURING
wrap_burst_mode: ENABLE or DISABLE
nwait_polarity: EXMC_NWAIT_POLARITY_LOW,EXMC_NWAIT_POLARITY_HIGH
burst_mode: ENABLE or DISABLE
databus_width: EXMC_NOR_DATABUS_WIDTH_8B,EXMC_NOR_DATABUS_WIDTH_16B
memory_type: EXMC_MEMORY_TYPE_SRAM,EXMC_MEMORY_TYPE_PSRAM,EXMC_MEMORY_TYPE_NOR
address_data_mux: ENABLE or DISABLE
read_write_timing: struct exmc_norsram_timing_parameter_struct set the time
write_timing: struct exmc_norsram_timing_parameter_struct set the time
\param[out] none
\retval none
*/
void exmc_norsram_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct)
{
uint32_t snctl = 0x00000000U,sntcfg = 0x00000000U,snwtcfg = 0x00000000U;
/* get the register value */
snctl = EXMC_SNCTL(exmc_norsram_init_struct->norsram_region);
/* clear relative bits */
snctl &= ((uint32_t)~(EXMC_SNCTL_EXMODEN | EXMC_SNCTL_NRTP | EXMC_SNCTL_NRW | EXMC_SNCTL_SBRSTEN |
EXMC_SNCTL_NRWTPOL | EXMC_SNCTL_WRAPEN | EXMC_SNCTL_NRWTCFG | EXMC_SNCTL_WREN |
EXMC_SNCTL_NRWTEN | EXMC_SNCTL_EXMODEN | EXMC_SNCTL_ASYNCWAIT | EXMC_SNCTL_SYNCWR |
EXMC_SNCTL_NRBKEN));
snctl = (uint32_t)(exmc_norsram_init_struct->address_data_mux << SNCTL_NRMUX_OFFSET) |
exmc_norsram_init_struct->memory_type |
exmc_norsram_init_struct->databus_width |
(exmc_norsram_init_struct->burst_mode << SNCTL_SBRSTEN_OFFSET) |
exmc_norsram_init_struct->nwait_polarity |
(exmc_norsram_init_struct->wrap_burst_mode << SNCTL_WRAPEN_OFFSET) |
exmc_norsram_init_struct->nwait_config |
(exmc_norsram_init_struct->memory_write << SNCTL_WREN_OFFSET) |
(exmc_norsram_init_struct->nwait_signal << SNCTL_NRWTEN_OFFSET) |
(exmc_norsram_init_struct->extended_mode << SNCTL_EXMODEN_OFFSET) |
(exmc_norsram_init_struct->asyn_wait << SNCTL_ASYNCWAIT_OFFSET) |
exmc_norsram_init_struct->write_mode;
sntcfg = (uint32_t)exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime |
(exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime << SNTCFG_AHLD_OFFSET) |
(exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime << SNTCFG_DSET_OFFSET) |
(exmc_norsram_init_struct->read_write_timing->bus_latency << SNTCFG_BUSLAT_OFFSET) |
exmc_norsram_init_struct->read_write_timing->syn_clk_division |
exmc_norsram_init_struct->read_write_timing->syn_data_latency |
exmc_norsram_init_struct->read_write_timing->asyn_access_mode;
/* nor flash access enable */
if(EXMC_MEMORY_TYPE_NOR == exmc_norsram_init_struct->memory_type)
{
snctl |= (uint32_t)EXMC_SNCTL_NREN;
}
/* extended mode configure */
if(ENABLE == exmc_norsram_init_struct->extended_mode)
{
snwtcfg = (uint32_t)exmc_norsram_init_struct->write_timing->asyn_address_setuptime |
(exmc_norsram_init_struct->write_timing->asyn_address_holdtime << SNTCFG_AHLD_OFFSET )|
(exmc_norsram_init_struct->write_timing->asyn_data_setuptime << SNTCFG_DSET_OFFSET) |
(exmc_norsram_init_struct->write_timing->bus_latency << SNTCFG_BUSLAT_OFFSET) |
exmc_norsram_init_struct->write_timing->asyn_access_mode;
}
else
{
snwtcfg = BANK0_SNWTCFG_RESET;
}
/* configure the registers */
EXMC_SNCTL(exmc_norsram_init_struct->norsram_region) = snctl;
EXMC_SNTCFG(exmc_norsram_init_struct->norsram_region) = sntcfg;
EXMC_SNWTCFG(exmc_norsram_init_struct->norsram_region) = snwtcfg;
}
/*!
\brief initialize the struct exmc_norsram_parameter_struct
\param[in] none
\param[out] exmc_norsram_init_struct: the initialized struct exmc_norsram_parameter_struct pointer
\retval none
*/
void exmc_norsram_parameter_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct)
{
/* configure the structure with default value */
exmc_norsram_init_struct->norsram_region = EXMC_BANK0_NORSRAM_REGION0;
exmc_norsram_init_struct->address_data_mux = ENABLE;
exmc_norsram_init_struct->memory_type = EXMC_MEMORY_TYPE_SRAM;
exmc_norsram_init_struct->databus_width = EXMC_NOR_DATABUS_WIDTH_8B;
exmc_norsram_init_struct->burst_mode = DISABLE;
exmc_norsram_init_struct->nwait_polarity = EXMC_NWAIT_POLARITY_LOW;
exmc_norsram_init_struct->wrap_burst_mode = DISABLE;
exmc_norsram_init_struct->nwait_config = EXMC_NWAIT_CONFIG_BEFORE;
exmc_norsram_init_struct->memory_write = ENABLE;
exmc_norsram_init_struct->nwait_signal = ENABLE;
exmc_norsram_init_struct->extended_mode = DISABLE;
exmc_norsram_init_struct->asyn_wait = DISABLE;
exmc_norsram_init_struct->write_mode = EXMC_ASYN_WRITE;
/* read/write timing configure */
exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime = 0xFU;
exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime = 0xFU;
exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime = 0xFFU;
exmc_norsram_init_struct->read_write_timing->bus_latency = 0xFU;
exmc_norsram_init_struct->read_write_timing->syn_clk_division = EXMC_SYN_CLOCK_RATIO_16_CLK;
exmc_norsram_init_struct->read_write_timing->syn_data_latency = EXMC_DATALAT_17_CLK;
exmc_norsram_init_struct->read_write_timing->asyn_access_mode = EXMC_ACCESS_MODE_A;
/* write timing configure, when extended mode is used */
exmc_norsram_init_struct->write_timing->asyn_address_setuptime = 0xFU;
exmc_norsram_init_struct->write_timing->asyn_address_holdtime = 0xFU;
exmc_norsram_init_struct->write_timing->asyn_data_setuptime = 0xFFU;
exmc_norsram_init_struct->write_timing->bus_latency = 0xFU;
exmc_norsram_init_struct->write_timing->asyn_access_mode = EXMC_ACCESS_MODE_A;
}
/*!
\brief consecutive clock configure
\param[in] clock_mode: specifie when the clock is generated
\arg EXMC_CLOCK_SYN_MODE: the clock is generated only during synchronous access
\arg EXMC_CLOCK_UNCONDITIONALLY: the clock is generated unconditionally
\param[out] none
\retval none
*/
void exmc_norsram_consecutive_clock_config(uint32_t clock_mode)
{
if (EXMC_CLOCK_UNCONDITIONALLY == clock_mode){
EXMC_SNCTL(EXMC_BANK0_NORSRAM_REGION0) |= EXMC_CLOCK_UNCONDITIONALLY;
}else{
EXMC_SNCTL(EXMC_BANK0_NORSRAM_REGION0) &= ~EXMC_CLOCK_UNCONDITIONALLY;
}
}
/*!
\brief CRAM page size configure
\param[in] page_size: CRAM page size
\arg EXMC_CRAM_AUTO_SPLIT: the clock is generated only during synchronous access
\arg EXMC_CRAM_PAGE_SIZE_128_BYTES: page size is 128 bytes
\arg EXMC_CRAM_PAGE_SIZE_256_BYTES: page size is 256 bytes
\arg EXMC_CRAM_PAGE_SIZE_512_BYTES: page size is 512 bytes
\arg EXMC_CRAM_PAGE_SIZE_1024_BYTES: page size is 1024 bytes
\param[out] none
\retval none
*/
void exmc_norsram_page_size_config(uint32_t page_size)
{
/* reset the bits */
EXMC_SNCTL(EXMC_BANK0_NORSRAM_REGION0) &= ~EXMC_SNCTL_CPS;
/* set the CPS bits */
EXMC_SNCTL(EXMC_BANK0_NORSRAM_REGION0) |= page_size;
}
/*!
\brief enable EXMC NOR/PSRAM bank region
\param[in] exmc_norsram_region: specifie the region of NOR/PSRAM bank
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3)
\param[out] none
\retval none
*/
void exmc_norsram_enable(uint32_t exmc_norsram_region)
{
EXMC_SNCTL(exmc_norsram_region) |= (uint32_t)EXMC_SNCTL_NRBKEN;
}
/*!
\brief disable EXMC NOR/PSRAM bank region
\param[in] exmc_norsram_region: specifie the region of NOR/PSRAM Bank
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0..3)
\param[out] none
\retval none
*/
void exmc_norsram_disable(uint32_t exmc_norsram_region)
{
EXMC_SNCTL(exmc_norsram_region) &= ~(uint32_t)EXMC_SNCTL_NRBKEN;
}
/*!
\brief deinitialize EXMC NAND bank
\param[in] exmc_nand_bank: select the bank of NAND
\arg EXMC_BANKx_NAND(x=1..2)
\param[out] none
\retval none
*/
void exmc_nand_deinit(uint32_t exmc_nand_bank)
{
/* EXMC_BANK1_NAND or EXMC_BANK2_NAND */
EXMC_NPCTL(exmc_nand_bank) = BANK1_2_NPCTL_RESET;
EXMC_NPINTEN(exmc_nand_bank) = BANK1_2_NPINTEN_RESET;
EXMC_NPCTCFG(exmc_nand_bank) = BANK1_2_NPCTCFG_RESET;
EXMC_NPATCFG(exmc_nand_bank) = BANK1_2_NPATCFG_RESET;
}
/*!
\brief initialize EXMC NAND bank
\param[in] exmc_nand_parameter_struct: configure the EXMC NAND parameter
nand_bank: EXMC_BANK1_NAND,EXMC_BANK2_NAND
ecc_size: EXMC_ECC_SIZE_xBYTES,x=256,512,1024,2048,4096
atr_latency: EXMC_ALE_RE_DELAY_x_HCLK,x=1..16
ctr_latency: EXMC_CLE_RE_DELAY_x_HCLK,x=1..16
ecc_logic: ENABLE or DISABLE
databus_width: EXMC_NAND_DATABUS_WIDTH_8B,EXMC_NAND_DATABUS_WIDTH_16B
wait_feature: ENABLE or DISABLE
common_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time
attribute_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time
\param[out] none
\retval none
*/
void exmc_nand_init(exmc_nand_parameter_struct* exmc_nand_init_struct)
{
uint32_t npctl = 0x00000000U, npctcfg = 0x00000000U, npatcfg = 0x00000000U;
npctl = (uint32_t)(exmc_nand_init_struct->wait_feature << NPCTL_NDWTEN_OFFSET)|
EXMC_NPCTL_NDTP |
exmc_nand_init_struct->databus_width |
(exmc_nand_init_struct->ecc_logic << NPCTL_ECCEN_OFFSET)|
exmc_nand_init_struct->ecc_size |
exmc_nand_init_struct->ctr_latency |
exmc_nand_init_struct->atr_latency;
npctcfg = (uint32_t)(exmc_nand_init_struct->common_space_timing->setuptime - 1U) |
((exmc_nand_init_struct->common_space_timing->waittime - 1U) << NPCTCFG_COMWAIT_OFFSET) |
(exmc_nand_init_struct->common_space_timing->holdtime << NPCTCFG_COMHLD_OFFSET)|
((exmc_nand_init_struct->common_space_timing->databus_hiztime - 1U) << NPCTCFG_COMHIZ_OFFSET);
npatcfg = (uint32_t)(exmc_nand_init_struct->attribute_space_timing->setuptime - 1U) |
((exmc_nand_init_struct->attribute_space_timing->waittime - 1U) << NPATCFG_COMWAIT_OFFSET) |
(exmc_nand_init_struct->attribute_space_timing->holdtime << NPATCFG_COMHLD_OFFSET)|
(exmc_nand_init_struct->attribute_space_timing->databus_hiztime << NPATCFG_COMHIZ_OFFSET);
/* EXMC_BANK1_NAND or EXMC_BANK2_NAND initialize */
EXMC_NPCTL(exmc_nand_init_struct->nand_bank) = npctl;
EXMC_NPCTCFG(exmc_nand_init_struct->nand_bank) = npctcfg;
EXMC_NPATCFG(exmc_nand_init_struct->nand_bank) = npatcfg;
}
/*!
\brief initialize the struct exmc_norsram_parameter_struct
\param[in] none
\param[out] the initialized struct exmc_norsram_parameter_struct pointer
\retval none
*/
void exmc_nand_parameter_init(exmc_nand_parameter_struct* exmc_nand_init_struct)
{
/* configure the structure with default value */
exmc_nand_init_struct->nand_bank = EXMC_BANK1_NAND;
exmc_nand_init_struct->wait_feature = DISABLE;
exmc_nand_init_struct->databus_width = EXMC_NAND_DATABUS_WIDTH_8B;
exmc_nand_init_struct->ecc_logic = DISABLE;
exmc_nand_init_struct->ecc_size = EXMC_ECC_SIZE_256BYTES;
exmc_nand_init_struct->ctr_latency = 0x0U;
exmc_nand_init_struct->atr_latency = 0x0U;
exmc_nand_init_struct->common_space_timing->setuptime = 0xfcU;
exmc_nand_init_struct->common_space_timing->waittime = 0xfcU;
exmc_nand_init_struct->common_space_timing->holdtime = 0xfcU;
exmc_nand_init_struct->common_space_timing->databus_hiztime = 0xfcU;
exmc_nand_init_struct->attribute_space_timing->setuptime = 0xfcU;
exmc_nand_init_struct->attribute_space_timing->waittime = 0xfcU;
exmc_nand_init_struct->attribute_space_timing->holdtime = 0xfcU;
exmc_nand_init_struct->attribute_space_timing->databus_hiztime = 0xfcU;
}
/*!
\brief enable NAND bank
\param[in] exmc_nand_bank: specifie the NAND bank
\arg EXMC_BANKx_NAND(x=1,2)
\param[out] none
\retval none
*/
void exmc_nand_enable(uint32_t exmc_nand_bank)
{
EXMC_NPCTL(exmc_nand_bank) |= EXMC_NPCTL_NDBKEN;
}
/*!
\brief disable NAND bank
\param[in] exmc_nand_bank: specifie the NAND bank
\arg EXMC_BANKx_NAND(x=1,2)
\param[out] none
\retval none
*/
void exmc_nand_disable(uint32_t exmc_nand_bank)
{
EXMC_NPCTL(exmc_nand_bank) &= ~EXMC_NPCTL_NDBKEN;
}
/*!
\brief enable or disable the EXMC NAND ECC function
\param[in] exmc_nand_bank: specifie the NAND bank
\arg EXMC_BANKx_NAND(x=1,2)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void exmc_nand_ecc_config(uint32_t exmc_nand_bank, ControlStatus newvalue)
{
if (ENABLE == newvalue)
{
/* enable the selected NAND bank ECC function */
EXMC_NPCTL(exmc_nand_bank) |= EXMC_NPCTL_ECCEN;
}
else
{
/* disable the selected NAND bank ECC function */
EXMC_NPCTL(exmc_nand_bank) &= ~EXMC_NPCTL_ECCEN;
}
}
/*!
\brief get the EXMC ECC value
\param[in] exmc_nand_bank: specifie the NAND bank
\arg EXMC_BANKx_NAND(x=1,2)
\param[out] none
\retval the error correction code(ECC) value
*/
uint32_t exmc_ecc_get(uint32_t exmc_nand_bank)
{
return(EXMC_NECC(exmc_nand_bank));
}
/*!
\brief deinitialize EXMC PC card bank
\param[in] none
\param[out] none
\retval none
*/
void exmc_pccard_deinit(void)
{
/* EXMC_BANK3_PCCARD */
EXMC_NPCTL3 = BANK3_NPCTL_RESET;
EXMC_NPINTEN3 = BANK3_NPINTEN_RESET;
EXMC_NPCTCFG3 = BANK3_NPCTCFG_RESET;
EXMC_NPATCFG3 = BANK3_NPATCFG_RESET;
EXMC_PIOTCFG3 = BANK3_PIOTCFG3_RESET;
}
/*!
\brief initialize EXMC PC card bank
\param[in] exmc_pccard_parameter_struct: configure the EXMC NAND parameter
atr_latency: EXMC_ALE_RE_DELAY_x_HCLK,x=1..16
ctr_latency: EXMC_CLE_RE_DELAY_x_HCLK,x=1..16
wait_feature: ENABLE or DISABLE
common_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time
attribute_space_timing: struct exmc_nand_pccard_timing_parameter_struct set the time
io_space_timing: exmc_nand_pccard_timing_parameter_struct set the time
\param[out] none
\retval none
*/
void exmc_pccard_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct)
{
/* configure the EXMC bank3 PC card control register */
EXMC_NPCTL3 = (uint32_t)(exmc_pccard_init_struct->wait_feature << NPCTL_NDWTEN_OFFSET) |
EXMC_NAND_DATABUS_WIDTH_16B |
exmc_pccard_init_struct->ctr_latency |
exmc_pccard_init_struct->atr_latency ;
/* configure the EXMC bank3 PC card common space timing configuration register */
EXMC_NPCTCFG3 = (uint32_t)(exmc_pccard_init_struct->common_space_timing->setuptime - 1U) |
((exmc_pccard_init_struct->common_space_timing->waittime - 1U) << NPCTCFG_COMWAIT_OFFSET) |
(exmc_pccard_init_struct->common_space_timing->holdtime << NPCTCFG_COMHLD_OFFSET)|
((exmc_pccard_init_struct->common_space_timing->databus_hiztime - 1U) << NPCTCFG_COMHIZ_OFFSET);
/* configure the EXMC bank3 PC card attribute space timing configuration register */
EXMC_NPATCFG3 = (uint32_t)(exmc_pccard_init_struct->attribute_space_timing->setuptime - 1U) |
((exmc_pccard_init_struct->attribute_space_timing->waittime - 1U) << NPATCFG_COMWAIT_OFFSET) |
(exmc_pccard_init_struct->attribute_space_timing->holdtime << NPATCFG_COMHLD_OFFSET)|
(exmc_pccard_init_struct->attribute_space_timing->databus_hiztime << NPATCFG_COMHIZ_OFFSET);
/* configure the EXMC bank3 PC card io space timing configuration register */
EXMC_PIOTCFG3 = (uint32_t)(exmc_pccard_init_struct->io_space_timing->setuptime - 1U) |
((exmc_pccard_init_struct->io_space_timing->waittime - 1U) << PIOTCFG_COMWAIT_OFFSET) |
(exmc_pccard_init_struct->io_space_timing->holdtime << PIOTCFG_COMHLD_OFFSET)|
(exmc_pccard_init_struct->io_space_timing->databus_hiztime << PIOTCFG_COMHIZ_OFFSET);
}
/*!
\brief initialize the struct exmc_pccard_parameter_struct
\param[in] none
\param[out] the initialized struct exmc_pccard_parameter_struct pointer
\retval none
*/
void exmc_pccard_parameter_init(exmc_pccard_parameter_struct* exmc_pccard_init_struct)
{
/* configure the structure with default value */
exmc_pccard_init_struct->wait_feature = DISABLE;
exmc_pccard_init_struct->ctr_latency = 0x0U;
exmc_pccard_init_struct->atr_latency = 0x0U;
exmc_pccard_init_struct->common_space_timing->setuptime = 0xFCU;
exmc_pccard_init_struct->common_space_timing->waittime = 0xFCU;
exmc_pccard_init_struct->common_space_timing->holdtime = 0xFCU;
exmc_pccard_init_struct->common_space_timing->databus_hiztime = 0xFCU;
exmc_pccard_init_struct->attribute_space_timing->setuptime = 0xFCU;
exmc_pccard_init_struct->attribute_space_timing->waittime = 0xFCU;
exmc_pccard_init_struct->attribute_space_timing->holdtime = 0xFCU;
exmc_pccard_init_struct->attribute_space_timing->databus_hiztime = 0xFCU;
exmc_pccard_init_struct->io_space_timing->setuptime = 0xFCU;
exmc_pccard_init_struct->io_space_timing->waittime = 0xFCU;
exmc_pccard_init_struct->io_space_timing->holdtime = 0xFCU;
exmc_pccard_init_struct->io_space_timing->databus_hiztime = 0xFCU;
}
/*!
\brief enable PC Card Bank
\param[in] none
\param[out] none
\retval none
*/
void exmc_pccard_enable(void)
{
EXMC_NPCTL3 |= EXMC_NPCTL_NDBKEN;
}
/*!
\brief disable PC Card Bank
\param[in] none
\param[out] none
\retval none
*/
void exmc_pccard_disable(void)
{
EXMC_NPCTL3 &= ~EXMC_NPCTL_NDBKEN;
}
/*!
\brief deinitialize EXMC SDRAM device
\param[in] none
\param[out] none
\retval none
*/
void exmc_sdram_deinit(uint32_t exmc_sdram_device)
{
/* reset SDRAM registers */
EXMC_SDCTL(exmc_sdram_device) = SDRAM_DEVICE_SDCTL_RESET;
EXMC_SDTCFG(exmc_sdram_device) = SDRAM_DEVICE_SDTCFG_RESET;
EXMC_SDCMD = SDRAM_DEVICE_SDCMD_RESET;
EXMC_SDARI = SDRAM_DEVICE_SDARI_RESET;
EXMC_SDRSCTL = SDRAM_DEVICE_SDRSCTL_RESET;
}
/*!
\brief initialize EXMC SDRAM device
\param[in] exmc_sdram_parameter_struct: configure the EXMC SDRAM parameter
sdram_device: EXMC_SDRAM_DEVICE0,EXMC_SDRAM_DEVICE1
pipeline_read_delay: EXMC_PIPELINE_DELAY_x_HCLK,x=0..2
brust_read_switch: ENABLE or DISABLE
sdclock_config: EXMC_SDCLK_DISABLE,EXMC_SDCLK_PERIODS_2_HCLK,EXMC_SDCLK_PERIODS_3_HCLK
write_protection: ENABLE or DISABLE
cas_latency: EXMC_CAS_LATENCY_x_SDCLK,x=1..3
internal_bank_number: EXMC_SDRAM_2_INTER_BANK,EXMC_SDRAM_4_INTER_BANK
data_width: EXMC_SDRAM_DATABUS_WIDTH_8B,EXMC_SDRAM_DATABUS_WIDTH_16B,EXMC_SDRAM_DATABUS_WIDTH_32B
row_address_width: EXMC_SDRAM_ROW_ADDRESS_x,x=11..13
column_address_width: EXMC_SDRAM_COW_ADDRESS_x,x=8..11
timing: exmc_sdram_timing_parameter_struct set the time
\param[out] none
\retval none
*/
void exmc_sdram_init(exmc_sdram_parameter_struct* exmc_sdram_init_struct)
{
uint32_t sdctl0, sdctl1, sdtcfg0, sdtcfg1;
/* configuration EXMC_SDCTL0 or EXMC_SDCTL1 */
if(EXMC_SDRAM_DEVICE0 == exmc_sdram_init_struct->sdram_device){
/* configuration EXMC_SDCTL0 */
EXMC_SDCTL(EXMC_SDRAM_DEVICE0) = (uint32_t)exmc_sdram_init_struct->column_address_width |
exmc_sdram_init_struct->row_address_width |
exmc_sdram_init_struct->data_width |
exmc_sdram_init_struct->internal_bank_number |
exmc_sdram_init_struct->cas_latency |
(exmc_sdram_init_struct->write_protection << SDCTL_WPEN_OFFSET)|
exmc_sdram_init_struct->sdclock_config |
(exmc_sdram_init_struct->brust_read_switch << SDCTL_BRSTRD_OFFSET)|
exmc_sdram_init_struct->pipeline_read_delay;
/* configuration EXMC_SDTCFG0 */
EXMC_SDTCFG(EXMC_SDRAM_DEVICE0) = (uint32_t)((exmc_sdram_init_struct->timing->load_mode_register_delay)-1U) |
(((exmc_sdram_init_struct->timing->exit_selfrefresh_delay)-1U) << SDTCFG_XSRD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_address_select_delay)-1U) << SDTCFG_RASD_OFFSET) |
(((exmc_sdram_init_struct->timing->auto_refresh_delay)-1U) << SDTCFG_ARFD_OFFSET) |
(((exmc_sdram_init_struct->timing->write_recovery_delay)-1U) << SDTCFG_WRD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_precharge_delay)-1U) << SDTCFG_RPD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_to_column_delay)-1U) << SDTCFG_RCD_OFFSET);
}else{
/* configuration EXMC_SDCTL0 and EXMC_SDCTL1 */
/* some bits in the EXMC_SDCTL1 register are reserved */
sdctl0 = EXMC_SDCTL(EXMC_SDRAM_DEVICE0) & (~( EXMC_SDCTL_PIPED | EXMC_SDCTL_BRSTRD | EXMC_SDCTL_SDCLK ));
sdctl0 |= (uint32_t)exmc_sdram_init_struct->sdclock_config |
exmc_sdram_init_struct->brust_read_switch |
exmc_sdram_init_struct->pipeline_read_delay;
sdctl1 = (uint32_t)exmc_sdram_init_struct->column_address_width |
exmc_sdram_init_struct->row_address_width |
exmc_sdram_init_struct->data_width |
exmc_sdram_init_struct->internal_bank_number |
exmc_sdram_init_struct->cas_latency |
exmc_sdram_init_struct->write_protection ;
EXMC_SDCTL(EXMC_SDRAM_DEVICE0) = sdctl0;
EXMC_SDCTL(EXMC_SDRAM_DEVICE1) = sdctl1;
/* configuration EXMC_SDTCFG0 and EXMC_SDTCFG1 */
/* some bits in the EXMC_SDTCFG1 register are reserved */
sdtcfg0 = EXMC_SDTCFG(EXMC_SDRAM_DEVICE0) & (~(EXMC_SDTCFG_RPD | EXMC_SDTCFG_WRD | EXMC_SDTCFG_ARFD));
sdtcfg0 |= (uint32_t)(((exmc_sdram_init_struct->timing->auto_refresh_delay)-1U) << SDTCFG_ARFD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_precharge_delay)-1U) << SDTCFG_RPD_OFFSET) |
(((exmc_sdram_init_struct->timing->write_recovery_delay)-1U) << SDTCFG_WRD_OFFSET);
sdtcfg1 = (uint32_t)((exmc_sdram_init_struct->timing->load_mode_register_delay)-1U) |
(((exmc_sdram_init_struct->timing->exit_selfrefresh_delay)-1U) << SDTCFG_XSRD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_address_select_delay)-1U) << SDTCFG_RASD_OFFSET) |
(((exmc_sdram_init_struct->timing->row_to_column_delay)-1U) << SDTCFG_RCD_OFFSET);
EXMC_SDTCFG(EXMC_SDRAM_DEVICE0) = sdtcfg0;
EXMC_SDTCFG(EXMC_SDRAM_DEVICE1) = sdtcfg1;
}
}
/*!
\brief initialize the struct exmc_pccard_parameter_struct
\param[in] none
\param[out] the initialized struct exmc_pccard_parameter_struct pointer
\retval none
*/
void exmc_sdram_parameter_init(exmc_sdram_parameter_struct* exmc_sdram_init_struct)
{
/* configure the structure with default value */
exmc_sdram_init_struct->sdram_device = EXMC_SDRAM_DEVICE0;
exmc_sdram_init_struct->column_address_width = EXMC_SDRAM_COW_ADDRESS_8;
exmc_sdram_init_struct->row_address_width = EXMC_SDRAM_ROW_ADDRESS_11;
exmc_sdram_init_struct->data_width = EXMC_SDRAM_DATABUS_WIDTH_16B;
exmc_sdram_init_struct->internal_bank_number = EXMC_SDRAM_4_INTER_BANK;
exmc_sdram_init_struct->cas_latency = EXMC_CAS_LATENCY_1_SDCLK;
exmc_sdram_init_struct->write_protection = ENABLE;
exmc_sdram_init_struct->sdclock_config = EXMC_SDCLK_DISABLE;
exmc_sdram_init_struct->brust_read_switch = DISABLE;
exmc_sdram_init_struct->pipeline_read_delay = EXMC_PIPELINE_DELAY_0_HCLK;
exmc_sdram_init_struct->timing->load_mode_register_delay = 16U;
exmc_sdram_init_struct->timing->exit_selfrefresh_delay = 16U;
exmc_sdram_init_struct->timing->row_address_select_delay = 16U;
exmc_sdram_init_struct->timing->auto_refresh_delay = 16U;
exmc_sdram_init_struct->timing->write_recovery_delay = 16U;
exmc_sdram_init_struct->timing->row_precharge_delay = 16U;
exmc_sdram_init_struct->timing->row_to_column_delay = 16U;
}
/*!
\brief configure the SDRAM memory command
\param[in] the struct exmc_sdram_command_parameter_struct pointer
\param[out] none
\retval none
*/
void exmc_sdram_command_config(exmc_sdram_command_parameter_struct* exmc_sdram_command_init_struct)
{
/* configure command register */
EXMC_SDCMD = (uint32_t)((exmc_sdram_command_init_struct->command) |
(exmc_sdram_command_init_struct->bank_select) |
((exmc_sdram_command_init_struct->auto_refresh_number)) |
((exmc_sdram_command_init_struct->mode_register_content)<<SDCMD_MRC_OFFSET) );
}
/*!
\brief set auto-refresh interval
\param[in] exmc_count: the number SDRAM clock cycles unit between two successive auto-refresh commands
\param[out] none
\retval none
*/
void exmc_sdram_refresh_count_set(uint32_t exmc_count)
{
uint32_t sdari;
sdari = EXMC_SDARI & (~EXMC_SDARI_ARINTV);
EXMC_SDARI = sdari | (uint32_t)((exmc_count << SDARI_ARINTV_OFFSET) & EXMC_SDARI_ARINTV);
}
/*!
\brief set the number of successive auto-refresh command
\param[in] exmc_number: the number SDRAM clock cycles unit between two successive auto-refresh commands
\param[out] none
\retval none
*/
void exmc_sdram_autorefresh_number_set(uint32_t exmc_number)
{
uint32_t sdcmd;
sdcmd = EXMC_SDCMD & (~EXMC_SDCMD_NARF);
EXMC_SDCMD = sdcmd | (uint32_t)((exmc_number << SDCMD_NARF_OFFSET) & EXMC_SDCMD_NARF) ;
}
/*!
\brief config the write protection function
\param[in] exmc_sdram_device: specifie the SDRAM device
\arg EXMC_SDRAM_DEVICEx(x=0,1)
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void exmc_sdram_write_protection_config(uint32_t exmc_sdram_device, ControlStatus newvalue)
{
if (ENABLE == newvalue){
EXMC_SDCTL(exmc_sdram_device) |= (uint32_t)EXMC_SDCTL_WPEN;
}else{
EXMC_SDCTL(exmc_sdram_device) &= ~((uint32_t)EXMC_SDCTL_WPEN);
}
}
/*!
\brief get the status of SDRAM device0 or device1
\param[in] exmc_sdram_device: specifie the SDRAM device
\arg EXMC_SDRAM_DEVICEx(x=0,1)
\param[out] none
\retval the status of SDRAM device
*/
uint32_t exmc_sdram_bankstatus_get(uint32_t exmc_sdram_device)
{
uint32_t sdstat = 0U;
if(EXMC_SDRAM_DEVICE0 == exmc_sdram_device)
{
sdstat = ((uint32_t)(EXMC_SDSTAT & EXMC_SDSDAT_STA0) >> SDSTAT_STA0_OFFSET);
}
else
{
sdstat = ((uint32_t)(EXMC_SDSTAT & EXMC_SDSDAT_STA1) >> SDSTAT_STA1_OFFSET);
}
return sdstat;
}
/*!
\brief configure the delayed sample clock of read data
\param[in] delay_cell: SDRAM the delayed sample clock of read data
\arg EXMC_SDRAM_x_DELAY_CELL(x=0..15)
\param[in] extra_hclk: sample cycle of read data
\arg EXMC_SDRAM_READSAMPLE_x_EXTRAHCLK(x=0,1)
\param[out] none
\retval none
*/
void exmc_sdram_readsample_config(uint32_t delay_cell, uint32_t extra_hclk)
{
uint32_t sdrsctl = 0U;
sdrsctl = EXMC_SDRSCTL & (~(EXMC_SDRSCTL_SDSC | EXMC_SDRSCTL_SSCR));
sdrsctl |= (uint32_t)(delay_cell & EXMC_SDRSCTL_SDSC) |
((extra_hclk << SDRSCTL_SSCR_OFFSET) & EXMC_SDRSCTL_SSCR);
EXMC_SDRSCTL = sdrsctl;
}
/*!
\brief enable or disable read sample
\param[in] newvalue: ENABLE or DISABLE
\param[out] none
\retval none
*/
void exmc_sdram_readsample_enable(ControlStatus newvalue)
{
if (ENABLE == newvalue){
EXMC_SDRSCTL |= EXMC_SDRSCTL_RSEN;
}else{
EXMC_SDRSCTL &= (uint32_t)(~EXMC_SDRSCTL_RSEN);
}
}
/*!
\brief deinitialize exmc SQPIPSRAM
\param[in] none
\param[out] none
\retval none
*/
void exmc_sqpipsram_deinit(void)
{
/* reset the registers */
EXMC_SINIT = BANK0_SQPI_SINIT_RESET;
EXMC_SRCMD = BANK0_SQPI_SRCMD_RESET;
EXMC_SWCMD = BANK0_SQPI_SWCMD_RESET;
EXMC_SIDL = BANK0_SQPI_SIDL_RESET;
EXMC_SIDH = BANK0_SQPI_SIDH_RESET;
}
/*!
\brief initialize EXMC SQPIPSRAM
\param[in] exmc_sqpipsram_parameter_struct: configure the EXMC SQPIPSRAM parameter
sample_polarity: EXMC_SDRAM_SAMPLE_RISING_EDGE,EXMC_SDRAM_SAMPLE_FALLING_EDGE
id_length: EXMC_SQPIPSRAM_ID_LENGTH_xB,x=8,16,32,64
address_bits: EXMC_SQPIPSRAM_ADDR_LENGTH_xB,x=1..26
command_bits: EXMC_SQPIPSRAM_COMMAND_LENGTH_xB,x=4,8,16
\param[out] none
\retval none
*/
void exmc_sqpipsram_init(exmc_sqpipsram_parameter_struct* exmc_sqpipsram_init_struct)
{
/* initialize SQPI controller */
EXMC_SINIT = (uint32_t)exmc_sqpipsram_init_struct->sample_polarity |
exmc_sqpipsram_init_struct->id_length |
exmc_sqpipsram_init_struct->address_bits |
exmc_sqpipsram_init_struct->command_bits;
}
/*!
\brief initialize the struct exmc_sqpipsram_parameter_struct
\param[in] the struct exmc_sqpipsram_parameter_struct pointer
\param[out] none
\retval none
*/
void exmc_sqpipsram_parameter_init(exmc_sqpipsram_parameter_struct* exmc_sqpipsram_init_struct)
{
/* configure the structure with default value */
exmc_sqpipsram_init_struct->sample_polarity = EXMC_SDRAM_SAMPLE_RISING_EDGE;
exmc_sqpipsram_init_struct->id_length = EXMC_SQPIPSRAM_ID_LENGTH_64B;
exmc_sqpipsram_init_struct->address_bits = EXMC_SQPIPSRAM_ADDR_LENGTH_24B;
exmc_sqpipsram_init_struct->command_bits = EXMC_SQPIPSRAM_COMMAND_LENGTH_8B;
}
/*!
\brief set the read command
\param[in] read_command_mode: configure SPI PSRAM read command mode
\arg EXMC_SQPIPSRAM_READ_MODE_DISABLE: not SPI mode
\arg EXMC_SQPIPSRAM_READ_MODE_SPI: SPI mode
\arg EXMC_SQPIPSRAM_READ_MODE_SQPI: SQPI mode
\arg EXMC_SQPIPSRAM_READ_MODE_QPI: QPI mode
\param[in] read_wait_cycle: wait cycle number after address phase,0..15
\param[in] read_command_code: read command for AHB read transfer
\param[out] none
\retval none
*/
void exmc_sqpipsram_read_command_set(uint32_t read_command_mode,uint32_t read_wait_cycle,uint32_t read_command_code)
{
uint32_t srcmd;
srcmd = (uint32_t) read_command_mode |
((read_wait_cycle << SRCMD_RWAITCYCLE_OFFSET) & EXMC_SRCMD_RWAITCYCLE) |
((read_command_code & EXMC_SRCMD_RCMD));
EXMC_SRCMD = srcmd;
}
/*!
\brief set the write command
\param[in] write_command_mode: configure SPI PSRAM write command mode
\arg EXMC_SQPIPSRAM_WRITE_MODE_DISABLE: not SPI mode
\arg EXMC_SQPIPSRAM_WRITE_MODE_SPI: SPI mode
\arg EXMC_SQPIPSRAM_WRITE_MODE_SQPI: SQPI mode
\arg EXMC_SQPIPSRAM_WRITE_MODE_QPI: QPI mode
\param[in] write_wait_cycle: wait cycle number after address phase,0..15
\param[in] write_command_code: read command for AHB read transfer
\param[out] none
\retval none
*/
void exmc_sqpipsram_write_command_set(uint32_t write_command_mode,uint32_t write_wait_cycle,uint32_t write_command_code)
{
uint32_t swcmd;
swcmd = (uint32_t) write_command_mode |
((write_wait_cycle << SWCMD_WWAITCYCLE_OFFSET) & EXMC_SWCMD_WWAITCYCLE) |
((write_command_code & EXMC_SWCMD_WCMD));
EXMC_SWCMD = swcmd;
}
/*!
\brief send SPI read ID command
\param[in] none
\param[out] none
\retval none
*/
void exmc_sqpipsram_read_id_command_send(void)
{
EXMC_SRCMD |= EXMC_SRCMD_RDID;
}
/*!
\brief send SPI special command which does not have address and data phase
\param[in] none
\param[out] none
\retval none
*/
void exmc_sqpipsram_write_cmd_send(void)
{
EXMC_SWCMD |= EXMC_SWCMD_SC;
}
/*!
\brief get the EXMC SPI ID low data
\param[in] none
\param[out] none
\retval the ID low data
*/
uint32_t exmc_sqpipsram_low_id_get(void)
{
return (EXMC_SIDL);
}
/*!
\brief get the EXMC SPI ID high data
\param[in] none
\param[out] none
\retval the ID high data
*/
uint32_t exmc_sqpipsram_high_id_get(void)
{
return (EXMC_SIDH);
}
/*!
\brief get the bit value of EXMC send write command bit or read ID command
\param[in] send_command_flag: the send command flag
\arg EXMC_SEND_COMMAND_FLAG_RDID: EXMC_SRCMD_RDID flag bit
\arg EXMC_SEND_COMMAND_FLAG_SC: EXMC_SWCMD_SC flag bit
\param[out] none
\retval the new value of send command flag
*/
FlagStatus exmc_sqpipsram_send_command_state_get(uint32_t send_command_flag)
{
uint32_t flag = 0x00000000U;
if(EXMC_SEND_COMMAND_FLAG_RDID == send_command_flag){
flag = EXMC_SRCMD;
}else if(EXMC_SEND_COMMAND_FLAG_SC == send_command_flag){
flag = EXMC_SWCMD;
}else{
}
if (flag & send_command_flag){
/* flag is set */
return SET;
}else{
/* flag is reset */
return RESET;
}
}
/*!
\brief check EXMC flag is set or not
\param[in] exmc_bank: specifies the NAND bank , PC card bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC Card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] flag: specify get which flag
\arg EXMC_NAND_PCCARD_FLAG_RISE: interrupt rising edge status
\arg EXMC_NAND_PCCARD_FLAG_LEVEL: interrupt high-level status
\arg EXMC_NAND_PCCARD_FLAG_FALL: interrupt falling edge status
\arg EXMC_NAND_PCCARD_FLAG_FIFOE: FIFO empty flag
\arg EXMC_SDRAM_FLAG_REFRESH: refresh error interrupt flag
\arg EXMC_SDRAM_FLAG_NREADY: not ready status
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus exmc_flag_get(uint32_t exmc_bank,uint32_t flag)
{
uint32_t status = 0x00000000U;
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
status = EXMC_NPINTEN(exmc_bank);
}else{
/* SDRAM device0 or device1 */
status = EXMC_SDSTAT;
}
if ((status & flag) != (uint32_t)flag ){
/* flag is reset */
return RESET;
}else{
/* flag is set */
return SET;
}
}
/*!
\brief clear EXMC a channel flag
\param[in] exmc_bank: specifie the NAND bank , PCCARD bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] flag: specify get which flag
\arg EXMC_NAND_PCCARD_FLAG_RISE: interrupt rising edge status
\arg EXMC_NAND_PCCARD_FLAG_LEVEL: interrupt high-level status
\arg EXMC_NAND_PCCARD_FLAG_FALL: interrupt falling edge status
\arg EXMC_NAND_PCCARD_FLAG_FIFOE: FIFO empty flag
\arg EXMC_SDRAM_FLAG_REFRESH: refresh error interrupt flag
\arg EXMC_SDRAM_FLAG_NREADY: not ready status
\param[out] none
\retval none
*/
void exmc_flag_clear(uint32_t exmc_bank,uint32_t flag)
{
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
EXMC_NPINTEN(exmc_bank) &= ~flag;
}else{
/* SDRAM device0 or device1 */
EXMC_SDSTAT &= ~flag;
}
}
/*!
\brief check EXMC interrupt flag is set or not
\param[in] exmc_bank: specifies the NAND bank , PC card bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] interrupt_source: specify get which interrupt flag
\arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge
\arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level
\arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge
\arg EXMC_SDRAM_INT_REFRESH: interrupt source of refresh error
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus exmc_interrupt_flag_get(uint32_t exmc_bank,uint32_t interrupt_source)
{
uint32_t status = 0x00000000U,interrupt_enable = 0x00000000U,interrupt_state = 0x00000000U;
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
status = EXMC_NPINTEN(exmc_bank);
interrupt_enable = (status & (interrupt_source >> INTEN_INTEN_OFFSET));
}else{
/* SDRAM device0 or device1 */
status = EXMC_SDARI;
interrupt_enable = (EXMC_SDSTAT & EXMC_SDSDAT_REIF);
}
interrupt_state = (status & interrupt_source);
if ((interrupt_enable) && (interrupt_state)){
/* interrupt flag is set */
return SET;
}else{
/* interrupt flag is reset */
return RESET;
}
}
/*!
\brief clear EXMC one channel interrupt flag
\param[in] exmc_bank: specifies the NAND bank , PC card bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] interrupt_source: specify get which interrupt flag
\arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge
\arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level
\arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge
\arg EXMC_SDRAM_INT_REFRESH: interrupt source of refresh error
\param[out] none
\retval none
*/
void exmc_interrupt_flag_clear(uint32_t exmc_bank,uint32_t interrupt_source)
{
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
EXMC_NPINTEN(exmc_bank) &= ~(interrupt_source >> INTEN_INTEN_OFFSET);
}else{
/* SDRAM device0 or device1 */
EXMC_SDARI |= EXMC_SDARI_REC;
}
}
/*!
\brief enable EXMC interrupt
\param[in] exmc_bank: specifies the NAND bank,PC card bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] interrupt_source: specify get which interrupt flag
\arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge
\arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level
\arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge
\arg EXMC_SDRAM_INT_REFRESH: interrupt source of refresh error
\param[out] none
\retval none
*/
void exmc_interrupt_enable(uint32_t exmc_bank,uint32_t interrupt_source)
{
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
EXMC_NPINTEN(exmc_bank) |= interrupt_source;
}else{
/* SDRAM device0 or device1 */
EXMC_SDARI |= EXMC_SDARI_REIE;
}
}
/*!
\brief disable EXMC interrupt
\param[in] exmc_bank: specifies the NAND bank , PC card bank or SDRAM device
\arg EXMC_BANK1_NAND: the NAND bank1
\arg EXMC_BANK2_NAND: the NAND bank2
\arg EXMC_BANK3_PCCARD: the PC card bank
\arg EXMC_SDRAM_DEVICE0: the SDRAM device0
\arg EXMC_SDRAM_DEVICE1: the SDRAM device1
\param[in] interrupt_source: specify get which interrupt flag
\arg EXMC_NAND_PCCARD_INT_RISE: interrupt source of rising edge
\arg EXMC_NAND_PCCARD_INT_LEVEL: interrupt source of high-level
\arg EXMC_NAND_PCCARD_INT_FALL: interrupt source of falling edge
\arg EXMC_SDRAM_INT_REFRESH: interrupt source of refresh error
\param[out] none
\retval none
*/
void exmc_interrupt_disable(uint32_t exmc_bank,uint32_t interrupt_source)
{
if((EXMC_BANK1_NAND == exmc_bank) || (EXMC_BANK2_NAND == exmc_bank) || (EXMC_BANK3_PCCARD == exmc_bank)){
/* NAND bank1,bank2 or PC card bank3 */
EXMC_NPINTEN(exmc_bank) &= ~interrupt_source;
}else{
/* SDRAM device0 or device1 */
EXMC_SDARI &= ~EXMC_SDARI_REIE;
}
}