rt-thread-official/bsp/acm32/acm32f0x0-nucleo/drivers/Kconfig

menu "Hardware Drivers Config"

config SOC_ACM32F070RBT7
    bool
    select SOC_SERIES_ACM32F0
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

config SOC_SRAM_START_ADDR
    hex
    default 0x20000000

config SOC_SRAM_SIZE
    hex
    default 0x20

config SOC_FLASH_START_ADDR
    hex
    default 0x00000000

config SOC_FLASH_SIZE
    hex
    default 0x80

menu "Onboard Peripheral Drivers"

endmenu

menu "On-chip Peripheral Drivers"

    menu "Hardware GPIO"
        config BSP_USING_GPIO1
            bool "Enable GPIOAB"
            default y
            select RT_USING_PIN
        config BSP_USING_GPIO2
            bool "Enable GPIOCD"
            default y
            select RT_USING_PIN
    endmenu

    config BSP_USING_ADC
        bool "Enable ADC"
        select RT_USING_ADC
        default n

    menu "Hardware UART"
        config BSP_USING_UART1
            bool "Enable UART1 (PA9/PA10)"
            default y
            select RT_USING_SERIAL

        config BSP_USING_UART2
            bool "Enable UART2 (PA2/PA3)"
            default y
            select RT_USING_SERIAL

        if BSP_USING_UART2
            config BSP_UART2_RX_USING_DMA
                bool "Enable UART2 RX DMA"
                depends on BSP_USING_UART2
                select RT_SERIAL_USING_DMA
                default n

            config BSP_UART2_TX_USING_DMA
                bool "Enable UART2 TX DMA"
                depends on BSP_USING_UART2
                select RT_SERIAL_USING_DMA
                default n
        endif

        config BSP_USING_UART3
            bool "Enable UART3 (PC4/PC5)"
            default n
            select RT_USING_SERIAL

        if BSP_USING_UART3
            config BSP_UART3_RX_USING_DMA
                bool "Enable UART3 RX DMA"
                depends on BSP_USING_UART3
                select RT_SERIAL_USING_DMA
                default n

            config BSP_UART3_TX_USING_DMA
                bool "Enable UART3 TX DMA"
                depends on BSP_USING_UART3
                select RT_SERIAL_USING_DMA
                default n
        endif
    endmenu

    config BSP_USING_RTC
        bool "Enable RTC"
        select RT_USING_RTC
        default n

    menu "Hardware I2C"
        config BSP_USING_I2C1
            bool "Enable I2C1"
            default n
            select RT_USING_I2C
        config BSP_USING_I2C2
            bool "Enable I2C2"
            default n
            select RT_USING_I2C
    endmenu

    menuconfig BSP_USING_SOFT_I2C
        bool "Enable Soft I2C"
        select RT_USING_I2C
        select RT_USING_I2C_BITOPS
        select RT_USING_PIN
        default n
        if BSP_USING_SOFT_I2C
            menuconfig BSP_USING_I2C0
                bool "Enable I2C1 BUS (software simulation)"
                default n
                if BSP_USING_I2C0
                    config BSP_I2C0_SCL_PIN
                        int "i2c0 scl pin number (PD, 6)"
                        range 0 63
                        default 54
                    config BSP_I2C0_SDA_PIN
                        int "I2C0 sda pin number (PD, 7)"
                        range 0 63
                        default 55
                endif
        endif

    menu "Hardware CAN"
        config BSP_USING_CAN1
            bool "Enable CAN1"
            default n
            select RT_USING_CAN
    endmenu

    menu "Hardware TIMER"
        config BSP_USING_TIM1
            bool "Enable Timer1"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM3
            bool "Enable Timer3"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM6
            bool "Enable Timer6"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM14
            bool "Enable Timer14"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM15
            bool "Enable Timer15"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM16
            bool "Enable Timer16"
            default n
            select RT_USING_HWTIMER
        config BSP_USING_TIM17
            bool "Enable Timer17"
            default n
            select RT_USING_HWTIMER
    endmenu

    menu "Hardware WDT"
        config BSP_USING_WDT
            bool "Enable Watch Dog Timer"
            default n
            select RT_USING_WDT
        config BSP_USING_IWDT
            bool "Enable Independent Watch Dog Timer"
            default n
            select RT_USING_WDT
    endmenu

    config BSP_USING_LCD
        bool "Enable LCD"
        default n

    menu "Hardware SPI"
        config BSP_USING_SPI1
            bool "Enable SPI1"
            select RT_USING_SPI
            default n

        if BSP_USING_SPI1
            config BSP_SPI1_RX_USING_DMA
                bool "Enable SPI1 RX DMA"
                default n

            config BSP_SPI1_TX_USING_DMA
                bool "Enable SPI1 TX DMA"
                default n
        endif

        config BSP_USING_SPI2
            bool "Enable SPI2"
            select RT_USING_SPI
            default n

        if BSP_USING_SPI2
            config BSP_SPI2_RX_USING_DMA
                bool "Enable SPI2 RX DMA"
                default n

            config BSP_SPI2_TX_USING_DMA
                bool "Enable SPI2 TX DMA"
                default n
        endif
    endmenu

    menu "Hardware CRYPTO"
        config BSP_USING_CRC
            select RT_HWCRYPTO_USING_CRC
            bool "Enable CRC"
            default n
            select RT_USING_HWCRYPTO
        config BSP_USING_AES
            select RT_HWCRYPTO_USING_AES
            bool "Enable AES"
            default n
            select RT_USING_HWCRYPTO

        config BSP_USING_HRNG
            select RT_HWCRYPTO_USING_RNG
            bool "Enable HRNG"
            default n
            select RT_USING_HWCRYPTO
    endmenu

    config BSP_USING_CMP
        bool "Enable Analog Voltage Comparer"
        default n

    config BSP_USING_OPA
        bool "Enable Operational Amplifier"
        default n

    config BSP_USING_TKEY
        bool "Enable Touch Key"
        select RT_USING_TOUCH
        default n

    config BSP_USING_RPMU
        bool "Enable RTC PMU"
        select RT_USING_PM
        default n

endmenu

menu "Board extended module Drivers"

endmenu

endmenu
警告消除及代码格式化修改文件头信息修改ACM32F030 BSP的文件格式新增BSP驱动中的lib文件 IAR和GCC支持备份 1. 修复不能包含HAL_EFLASH.h问题， 2. 消除GCC编译的几个警告 1. gcc启动文件重命名；2. 文件头信息修改; 3. 硬件timer支持修改移动 .ignore_format.yml到bsp的目录下修改目录成相对目录 2021-08-23 10:13:53 +08:00			`menu "Hardware Drivers Config"`

			`config SOC_ACM32F070RBT7`
			`bool`
			`select SOC_SERIES_ACM32F0`
			`select RT_USING_COMPONENTS_INIT`
分离内存分配接口与内存分配算法 (#5175) * [kernel][mem] Multiple instances of small memory allocation algorithm * [kernel][mem] Change small memory management algorithm memory header flag * [kernel][mem] Fix assertion problem * [kernel][slab] Multiple instances of slab memory management algorithm * [kernel][memheap] Remove rt_malloc/rt_free/rt_realloc and other related memory interfaces * [kernel][mem] Clean up memory space of small memory management objects * [kernel][kservice] Add memory application interface and thread protection interface * [kernel][kservice] Fix function return value problem * [kernel][memheap] Optimize memheaptrace print * [kernel][memheap] Support best mode * [kernel][memory] Remove semaphore lock * [kernel][memheap] Add locked flag * [kernel][memory] Support malloc memory in interrupt * [kernel][memheap] Add 'memheapcheck' cmd * [kernel][mem] Fix failure to request full memory * [kernel][memheap] Fix compilation warning * [kernel][mem] Fix mem realloc ASSERT * [examples][testcases] Add small mem testcase * [examples][mem_tc] Modify test memory size * [examples][testcases] Add slab memory management algorithm test case * [examples][testcases] fix small memory management algorithm test case * [kernel][memory] Adjusting memory allocation algorithm object definition and interface * [kernel][memory] Fix compilation warning * [examples][utest] Fix mem test case * [examples][utest] fix slab test case * [utest][testcases] Shorten test time * [kernel][memory] Formatting code * [examples][utest] Adjust test run time * [examples][utest] Formatting code * [bsp] update all rtconfig.h 2021-12-16 16:23:58 +08:00			`select RT_USING_USER_MAIN`
警告消除及代码格式化修改文件头信息修改ACM32F030 BSP的文件格式新增BSP驱动中的lib文件 IAR和GCC支持备份 1. 修复不能包含HAL_EFLASH.h问题， 2. 消除GCC编译的几个警告 1. gcc启动文件重命名；2. 文件头信息修改; 3. 硬件timer支持修改移动 .ignore_format.yml到bsp的目录下修改目录成相对目录 2021-08-23 10:13:53 +08:00			`default y`

			`config SOC_SRAM_START_ADDR`
			`hex`
			`default 0x20000000`

			`config SOC_SRAM_SIZE`
			`hex`
			`default 0x20`

			`config SOC_FLASH_START_ADDR`
			`hex`
			`default 0x00000000`

			`config SOC_FLASH_SIZE`
			`hex`
			`default 0x80`

			`menu "Onboard Peripheral Drivers"`

			`endmenu`

			`menu "On-chip Peripheral Drivers"`

			`menu "Hardware GPIO"`
			`config BSP_USING_GPIO1`
			`bool "Enable GPIOAB"`
			`default y`
			`select RT_USING_PIN`
			`config BSP_USING_GPIO2`
			`bool "Enable GPIOCD"`
			`default y`
			`select RT_USING_PIN`
			`endmenu`

			`config BSP_USING_ADC`
			`bool "Enable ADC"`
			`select RT_USING_ADC`
			`default n`

			`menu "Hardware UART"`
			`config BSP_USING_UART1`
			`bool "Enable UART1 (PA9/PA10)"`
			`default y`
			`select RT_USING_SERIAL`

			`config BSP_USING_UART2`
			`bool "Enable UART2 (PA2/PA3)"`
			`default y`
			`select RT_USING_SERIAL`

			`if BSP_USING_UART2`
			`config BSP_UART2_RX_USING_DMA`
			`bool "Enable UART2 RX DMA"`
			`depends on BSP_USING_UART2`
			`select RT_SERIAL_USING_DMA`
			`default n`

			`config BSP_UART2_TX_USING_DMA`
			`bool "Enable UART2 TX DMA"`
			`depends on BSP_USING_UART2`
			`select RT_SERIAL_USING_DMA`
			`default n`
			`endif`

			`config BSP_USING_UART3`
			`bool "Enable UART3 (PC4/PC5)"`
			`default n`
			`select RT_USING_SERIAL`

			`if BSP_USING_UART3`
			`config BSP_UART3_RX_USING_DMA`
			`bool "Enable UART3 RX DMA"`
			`depends on BSP_USING_UART3`
			`select RT_SERIAL_USING_DMA`
			`default n`

			`config BSP_UART3_TX_USING_DMA`
			`bool "Enable UART3 TX DMA"`
			`depends on BSP_USING_UART3`
			`select RT_SERIAL_USING_DMA`
			`default n`
			`endif`
			`endmenu`

			`config BSP_USING_RTC`
			`bool "Enable RTC"`
			`select RT_USING_RTC`
			`default n`

			`menu "Hardware I2C"`
			`config BSP_USING_I2C1`
			`bool "Enable I2C1"`
			`default n`
			`select RT_USING_I2C`
			`config BSP_USING_I2C2`
			`bool "Enable I2C2"`
			`default n`
			`select RT_USING_I2C`
			`endmenu`

[i2c] adjust the timing for I2C initialization 2024-04-30 08:46:12 +08:00			`menuconfig BSP_USING_SOFT_I2C`
			`bool "Enable Soft I2C"`
			`select RT_USING_I2C`
			`select RT_USING_I2C_BITOPS`
			`select RT_USING_PIN`
			`default n`
			`if BSP_USING_SOFT_I2C`
			`menuconfig BSP_USING_I2C0`
			`bool "Enable I2C1 BUS (software simulation)"`
			`default n`
			`if BSP_USING_I2C0`
			`config BSP_I2C0_SCL_PIN`
			`int "i2c0 scl pin number (PD, 6)"`
			`range 0 63`
			`default 54`
			`config BSP_I2C0_SDA_PIN`
			`int "I2C0 sda pin number (PD, 7)"`
			`range 0 63`
			`default 55`
			`endif`
			`endif`

警告消除及代码格式化修改文件头信息修改ACM32F030 BSP的文件格式新增BSP驱动中的lib文件 IAR和GCC支持备份 1. 修复不能包含HAL_EFLASH.h问题， 2. 消除GCC编译的几个警告 1. gcc启动文件重命名；2. 文件头信息修改; 3. 硬件timer支持修改移动 .ignore_format.yml到bsp的目录下修改目录成相对目录 2021-08-23 10:13:53 +08:00			`menu "Hardware CAN"`
			`config BSP_USING_CAN1`
			`bool "Enable CAN1"`
			`default n`
			`select RT_USING_CAN`
			`endmenu`

			`menu "Hardware TIMER"`
			`config BSP_USING_TIM1`
			`bool "Enable Timer1"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM3`
			`bool "Enable Timer3"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM6`
			`bool "Enable Timer6"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM14`
			`bool "Enable Timer14"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM15`
			`bool "Enable Timer15"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM16`
			`bool "Enable Timer16"`
			`default n`
			`select RT_USING_HWTIMER`
			`config BSP_USING_TIM17`
			`bool "Enable Timer17"`
			`default n`
			`select RT_USING_HWTIMER`
			`endmenu`

			`menu "Hardware WDT"`
			`config BSP_USING_WDT`
			`bool "Enable Watch Dog Timer"`
			`default n`
			`select RT_USING_WDT`
			`config BSP_USING_IWDT`
			`bool "Enable Independent Watch Dog Timer"`
			`default n`
			`select RT_USING_WDT`
			`endmenu`

			`config BSP_USING_LCD`
			`bool "Enable LCD"`
			`default n`

			`menu "Hardware SPI"`
			`config BSP_USING_SPI1`
			`bool "Enable SPI1"`
			`select RT_USING_SPI`
			`default n`

			`if BSP_USING_SPI1`
			`config BSP_SPI1_RX_USING_DMA`
			`bool "Enable SPI1 RX DMA"`
			`default n`

			`config BSP_SPI1_TX_USING_DMA`
			`bool "Enable SPI1 TX DMA"`
			`default n`
			`endif`

			`config BSP_USING_SPI2`
			`bool "Enable SPI2"`
			`select RT_USING_SPI`
			`default n`

			`if BSP_USING_SPI2`
			`config BSP_SPI2_RX_USING_DMA`
			`bool "Enable SPI2 RX DMA"`
			`default n`

			`config BSP_SPI2_TX_USING_DMA`
			`bool "Enable SPI2 TX DMA"`
			`default n`
			`endif`
			`endmenu`

			`menu "Hardware CRYPTO"`
			`config BSP_USING_CRC`
			`select RT_HWCRYPTO_USING_CRC`
			`bool "Enable CRC"`
			`default n`
			`select RT_USING_HWCRYPTO`
			`config BSP_USING_AES`
			`select RT_HWCRYPTO_USING_AES`
			`bool "Enable AES"`
			`default n`
			`select RT_USING_HWCRYPTO`

			`config BSP_USING_HRNG`
			`select RT_HWCRYPTO_USING_RNG`
			`bool "Enable HRNG"`
			`default n`
			`select RT_USING_HWCRYPTO`
			`endmenu`

			`config BSP_USING_CMP`
			`bool "Enable Analog Voltage Comparer"`
			`default n`

			`config BSP_USING_OPA`
			`bool "Enable Operational Amplifier"`
			`default n`

			`config BSP_USING_TKEY`
			`bool "Enable Touch Key"`
			`select RT_USING_TOUCH`
			`default n`

			`config BSP_USING_RPMU`
			`bool "Enable RTC PMU"`
			`select RT_USING_PM`
			`default n`

			`endmenu`

			`menu "Board extended module Drivers"`

			`endmenu`

			`endmenu`