487 lines
20 KiB
C
487 lines
20 KiB
C
|
/******************************************************************************
|
|||
|
|
* Copyright (C) 2017, Huada Semiconductor Co.,Ltd All rights reserved.
|
|||
|
|
*
|
|||
|
|
* This software is owned and published by:
|
|||
|
|
* Huada Semiconductor Co.,Ltd ("HDSC").
|
|||
|
|
*
|
|||
|
|
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
|
|||
|
|
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
|
|||
|
|
*
|
|||
|
|
* This software contains source code for use with HDSC
|
|||
|
|
* components. This software is licensed by HDSC to be adapted only
|
|||
|
|
* for use in systems utilizing HDSC components. HDSC shall not be
|
|||
|
|
* responsible for misuse or illegal use of this software for devices not
|
|||
|
|
* supported herein. HDSC is providing this software "AS IS" and will
|
|||
|
|
* not be responsible for issues arising from incorrect user implementation
|
|||
|
|
* of the software.
|
|||
|
|
*
|
|||
|
|
* Disclaimer:
|
|||
|
|
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
|
|||
|
|
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
|
|||
|
|
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
|
|||
|
|
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
|
|||
|
|
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
|
|||
|
|
* WARRANTY OF NONINFRINGEMENT.
|
|||
|
|
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
|
|||
|
|
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
|
|||
|
|
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
|
|||
|
|
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
|
|||
|
|
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
|
|||
|
|
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
|
|||
|
|
* SAVINGS OR PROFITS,
|
|||
|
|
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
|||
|
|
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
|
|||
|
|
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
|
|||
|
|
* FROM, THE SOFTWARE.
|
|||
|
|
*
|
|||
|
|
* This software may be replicated in part or whole for the licensed use,
|
|||
|
|
* with the restriction that this Disclaimer and Copyright notice must be
|
|||
|
|
* included with each copy of this software, whether used in part or whole,
|
|||
|
|
* at all times.
|
|||
|
|
*/
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/** \file adc.h
|
|||
|
|
**
|
|||
|
|
** Header file for AD Converter functions
|
|||
|
|
** @link ADC Group Some description @endlink
|
|||
|
|
**
|
|||
|
|
** - 2017-06-28 Alex First Version
|
|||
|
|
**
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
#ifndef __ADC_H__
|
|||
|
|
#define __ADC_H__
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/* Include files */
|
|||
|
|
/******************************************************************************/
|
|||
|
|
#include "ddl.h"
|
|||
|
|
#include "interrupts_hc32l136.h"
|
|||
|
|
|
|||
|
|
/* C binding of definitions if building with C++ compiler */
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
extern "C"
|
|||
|
|
{
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \defgroup AdcGroup AD Converter (ADC)
|
|||
|
|
**
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
//@{
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global definitions
|
|||
|
|
******************************************************************************/
|
|||
|
|
#define ADC_SCAN_CH0_EN (0x1u) /*!< SCAN模式使用ADC CH0 */
|
|||
|
|
#define ADC_SCAN_CH1_EN (0x1u<<1) /*!< SCAN模式使用ADC CH1 */
|
|||
|
|
#define ADC_SCAN_CH2_EN (0x1u<<2) /*!< SCAN模式使用ADC CH2 */
|
|||
|
|
#define ADC_SCAN_CH3_EN (0x1u<<3) /*!< SCAN模式使用ADC CH3 */
|
|||
|
|
#define ADC_SCAN_CH4_EN (0x1u<<4) /*!< SCAN模式使用ADC CH4 */
|
|||
|
|
#define ADC_SCAN_CH5_EN (0x1u<<5) /*!< SCAN模式使用ADC CH5 */
|
|||
|
|
#define ADC_SCAN_CH6_EN (0x1u<<6) /*!< SCAN模式使用ADC CH6 */
|
|||
|
|
#define ADC_SCAN_CH7_EN (0x1u<<7) /*!< SCAN模式使用ADC CH7 */
|
|||
|
|
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
** Global type definitions
|
|||
|
|
*****************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC采样模式
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_op_mode
|
|||
|
|
{
|
|||
|
|
AdcSglMode = 0u, /*!< 单输入通道单次采样模式 */
|
|||
|
|
AdcSCanMode = 1u, /*!< 多输入通道顺序扫描采样模式,多输入通道插队扫描采样模式*/
|
|||
|
|
} en_adc_op_mode_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC时钟选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_clk_sel
|
|||
|
|
{
|
|||
|
|
AdcClkSysTDiv1 = 0u, /*!< PCLK */
|
|||
|
|
AdcClkSysTDiv2 = 1u, /*!< 1/2 PCLK */
|
|||
|
|
AdcClkSysTDiv4 = 2u, /*!< 1/4 PCLK */
|
|||
|
|
AdcClkSysTDiv8 = 3u, /*!< 1/8 PCLK */
|
|||
|
|
|
|||
|
|
} en_adc_clk_div_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC参考电压
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_ref_vol_sel
|
|||
|
|
{
|
|||
|
|
RefVolSelInBgr1p5 = 0u, /*!<内部参考电压1.5V(SPS<=200kHz)*/
|
|||
|
|
RefVolSelInBgr2p5 = 1u, /*!<内部参考电压2.5V(avdd>3V,SPS<=200kHz)*/
|
|||
|
|
RefVolSelExtern1 = 2u, /*!<外部输入(max avdd) PB01*/
|
|||
|
|
RefVolSelAVDD = 3u, /*!<AVDD*/
|
|||
|
|
|
|||
|
|
}en_adc_ref_vol_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC采样通道选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_samp_ch_sel
|
|||
|
|
{
|
|||
|
|
AdcExInputCH0 = 0u, /*!<使用通道0输入PA00*/
|
|||
|
|
AdcExInputCH1 = 1u, /*!<使用通道1输入PA01*/
|
|||
|
|
AdcExInputCH2 = 2u, /*!<使用通道2输入PA02*/
|
|||
|
|
AdcExInputCH3 = 3u, /*!<使用通道3输入PA03*/
|
|||
|
|
AdcExInputCH4 = 4u, /*!<使用通道4输入PA04*/
|
|||
|
|
AdcExInputCH5 = 5u, /*!<使用通道5输入PA05*/
|
|||
|
|
AdcExInputCH6 = 6u, /*!<使用通道6输入PA06*/
|
|||
|
|
AdcExInputCH7 = 7u, /*!<使用通道7输入PA07*/
|
|||
|
|
AdcExInputCH8 = 8u, /*!<使用通道8输入PB00*/
|
|||
|
|
AdcExInputCH9 = 9u, /*!<使用通道8输入PB01*/
|
|||
|
|
AdcExInputCH10 = 10u, /*!<使用通道8输入PC00*/
|
|||
|
|
AdcExInputCH11 = 11u, /*!<使用通道1输入PC01*/
|
|||
|
|
AdcExInputCH12 = 12u, /*!<使用通道2输入PC02*/
|
|||
|
|
AdcExInputCH13 = 13u, /*!<使用通道3输入PC03*/
|
|||
|
|
AdcExInputCH14 = 14u, /*!<使用通道4输入PC04*/
|
|||
|
|
AdcExInputCH15 = 15u, /*!<使用通道5输入PC05*/
|
|||
|
|
AdcExInputCH16 = 16u, /*!<使用通道6输入PB02*/
|
|||
|
|
AdcExInputCH17 = 17u, /*!<使用通道7输入PB10*/
|
|||
|
|
AdcExInputCH18 = 18u, /*!<使用通道8输入PB11*/
|
|||
|
|
AdcExInputCH19 = 19u, /*!<使用通道8输入PB12*/
|
|||
|
|
AdcExInputCH20 = 20u, /*!<使用通道7输入PB13*/
|
|||
|
|
AdcExInputCH21 = 21u, /*!<使用通道8输入PB14*/
|
|||
|
|
AdcExInputCH22 = 22u, /*!<使用通道8输入PB15*/
|
|||
|
|
AdcExInputCH23 = 23u, /*!<使用通道8输入PC06*/
|
|||
|
|
AdcOPA0Input = 24u, /*!<使用通道8输入OPA0*/
|
|||
|
|
AdcOPA1Input = 25u, /*!<使用通道8输入OPA1*/
|
|||
|
|
AdcOPA2Input = 26u, /*!<使用通道8输入OPA2*/
|
|||
|
|
AdcAVccDiV3Input = 27u, /*!<使用1/3 AVCC(必须使用输入增益)*/
|
|||
|
|
AdcAiTsInput = 28u, /*!<使用BGR_TS(必须使用输入增益)*/
|
|||
|
|
AdcVref1P2Input = 29u, /*!<使用Vref1P2(必须使用输入增益)*/
|
|||
|
|
|
|||
|
|
}en_adc_samp_ch_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC采样周期数选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_samp_time_sel
|
|||
|
|
{
|
|||
|
|
AdcSampTime4Clk = 0u, /*!<4个采样时钟*/
|
|||
|
|
AdcSampTime6Clk = 1u, /*!<6个采样时钟*/
|
|||
|
|
AdcSampTime8Clk = 2u, /*!<8个采样时钟*/
|
|||
|
|
AdcSampTime12Clk = 3u, /*!<12个采样时钟*/
|
|||
|
|
|
|||
|
|
}en_adc_samp_time_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC周边模块反射源选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_trig_sel
|
|||
|
|
{
|
|||
|
|
AdcTrigTimer0 = 0u, /*!<选择timer0中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer1 = 1u, /*!<选择timer1中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer2 = 2u, /*!<选择timer2中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer3 = 3u, /*!<选择timer3中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer4 = 4u, /*!<选择timer4中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer5 = 5u, /*!<选择timer5中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigTimer6 = 6u, /*!<选择timer6中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigUart0 = 7u, /*!<选择uart0中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigUart1 = 8u, /*!<选择uart1中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigLpuart0 = 9u, /*!<选择lpuart0中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigLpuart1 = 10u, /*!<选择lpuart1中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigVC0 = 11u, /*!<选择VC0中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigVC1 = 12u, /*!<选择VC1中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigRTC = 13u, /*!<选择RTC中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPCA = 14u, /*!<选择PCA中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigSPI0 = 15u, /*!<选择SPI0中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigSPI1 = 16u, /*!<选择SPI1中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigDMA = 17u, /*!<选择DMA中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPA03 = 18u, /*!<选择PA03中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPB03 = 19u, /*!<选择PB03中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPC03 = 20u, /*!<选择PC03中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPD03 = 21u, /*!<选择PD03中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPA07 = 22u, /*!<选择PA07中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPB07 = 23u, /*!<选择PB07中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPC07 = 24u, /*!<选择PC07中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPD07 = 25u, /*!<选择PD07中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPA11 = 26u, /*!<选择PA11中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPB11 = 27u, /*!<选择PB11中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPC11 = 28u, /*!<选择PC11中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPA15 = 29u, /*!<选择PA15中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPB15 = 30u, /*!<选择PB15中断源，自动触发ADC采样*/
|
|||
|
|
AdcTrigPC15 = 31u, /*!<选择PC15中断源，自动触发ADC采样*/
|
|||
|
|
}en_adc_trig_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC外部触发源寄存器选择
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_ext_trig_sel
|
|||
|
|
{
|
|||
|
|
AdcExtTrig0 = 0u, /*!<单次及顺序扫描转换 外部触发源选择寄存器*/
|
|||
|
|
AdcExtTrig1 = 1u, /*!<插队扫描转换 外部触发源选择寄存器*/
|
|||
|
|
}en_adc_ext_trig_sel_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC顺序转换通道
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_sqr_chmux
|
|||
|
|
{
|
|||
|
|
CH0MUX = 0u, /*!<转换通道0*/
|
|||
|
|
CH1MUX = 1u, /*!<转换通道1*/
|
|||
|
|
CH2MUX = 2u, /*!<转换通道2*/
|
|||
|
|
CH3MUX = 3u, /*!<转换通道3*/
|
|||
|
|
CH4MUX = 4u, /*!<转换通道4*/
|
|||
|
|
CH5MUX = 5u, /*!<转换通道5*/
|
|||
|
|
CH6MUX = 6u, /*!<转换通道6*/
|
|||
|
|
CH7MUX = 7u, /*!<转换通道7*/
|
|||
|
|
CH8MUX = 8u, /*!<转换通道8*/
|
|||
|
|
CH9MUX = 9u, /*!<转换通道9*/
|
|||
|
|
CH10MUX = 10u, /*!<转换通道10*/
|
|||
|
|
CH11MUX = 11u, /*!<转换通道11*/
|
|||
|
|
CH12MUX = 12u, /*!<转换通道12*/
|
|||
|
|
CH13MUX = 13u, /*!<转换通道13*/
|
|||
|
|
CH14MUX = 14u, /*!<转换通道14*/
|
|||
|
|
CH15MUX = 15u, /*!<转换通道15*/
|
|||
|
|
}en_adc_sqr_chmux_t;
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC插队转换通道
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_jqr_chmux
|
|||
|
|
{
|
|||
|
|
JQRCH0MUX = 0u, /*!<转换通道0*/
|
|||
|
|
JQRCH1MUX = 1u, /*!<转换通道1*/
|
|||
|
|
JQRCH2MUX = 2u, /*!<转换通道2*/
|
|||
|
|
JQRCH3MUX = 3u, /*!<转换通道3*/
|
|||
|
|
}en_adc_jqr_chmux_t;
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC结果对齐方式
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_align
|
|||
|
|
{
|
|||
|
|
AlignRight = 0u,
|
|||
|
|
AlignLeft = 1u,
|
|||
|
|
}en_adc_align_t;
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Extern type definitions ('typedef') *
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC配置
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_cfg
|
|||
|
|
{
|
|||
|
|
/*! ADC操作模式*/
|
|||
|
|
en_adc_op_mode_t enAdcOpMode;
|
|||
|
|
|
|||
|
|
/*! ADC时钟选择*/
|
|||
|
|
en_adc_clk_div_t enAdcClkDiv;
|
|||
|
|
|
|||
|
|
/*! ADC采样时间*/
|
|||
|
|
en_adc_samp_time_sel_t enAdcSampTimeSel;
|
|||
|
|
|
|||
|
|
/*! ADC参考电压*/
|
|||
|
|
en_adc_ref_vol_sel_t enAdcRefVolSel;
|
|||
|
|
|
|||
|
|
/*! ADC输入增益使能*/
|
|||
|
|
boolean_t bAdcInBufEn;
|
|||
|
|
}stc_adc_cfg_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC DMA触发源寄存器配置
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef enum en_adc_dmatrig
|
|||
|
|
{
|
|||
|
|
/*!插队扫描触发DMA读取控制*/
|
|||
|
|
DmaJqr = 0,
|
|||
|
|
/*!顺序扫描触发DMA读取控制*/
|
|||
|
|
DmaSqr = 1
|
|||
|
|
}en_adc_dmatrig_t;
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC外部触发源寄存器配置
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_ext_trig_cfg
|
|||
|
|
{
|
|||
|
|
/*! 外部触发源寄存器选择*/
|
|||
|
|
en_adc_ext_trig_sel_t enAdcExtTrigRegSel;
|
|||
|
|
|
|||
|
|
/*! ADC单次及顺序转换触发选择*/
|
|||
|
|
en_adc_trig_sel_t enAdcTrig0Sel;
|
|||
|
|
|
|||
|
|
/*! ADC插队转换触发选择*/
|
|||
|
|
en_adc_trig_sel_t enAdcTrig1Sel;
|
|||
|
|
|
|||
|
|
}stc_adc_ext_trig_cfg_t;
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC中断配置
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_irq
|
|||
|
|
{
|
|||
|
|
/*!<ADC插队扫描完成中断*/
|
|||
|
|
boolean_t bAdcJQRIrq;
|
|||
|
|
/*!<ADC顺序扫描完成中断*/
|
|||
|
|
boolean_t bAdcSQRIrq;
|
|||
|
|
/*! ADC区间中断*/
|
|||
|
|
boolean_t bAdcRegCmp;
|
|||
|
|
/*! ADC上超出区间中断*/
|
|||
|
|
boolean_t bAdcHhtCmp;
|
|||
|
|
/*! ADC下超出区间中断*/
|
|||
|
|
boolean_t bAdcLltCmp;
|
|||
|
|
/*!<ADC单次转换完成中断*/
|
|||
|
|
boolean_t bAdcIrq;
|
|||
|
|
}stc_adc_irq_t;
|
|||
|
|
|
|||
|
|
typedef struct stc_adc_threshold_cfg
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
boolean_t bAdcRegCmp ; /*!ADC区间使能*/
|
|||
|
|
|
|||
|
|
boolean_t bAdcHhtCmp ; /*!ADC上超出区间使能*/
|
|||
|
|
|
|||
|
|
boolean_t bAdcLltCmp ; /*!ADC下超出区间使能*/
|
|||
|
|
|
|||
|
|
uint32_t u32AdcRegHighThd; /*!ADC下超出区间*/
|
|||
|
|
|
|||
|
|
uint32_t u32AdcRegLowThd; /*!ADC下超出区间*/
|
|||
|
|
|
|||
|
|
en_adc_samp_ch_sel_t enThCh; /*!阈值比较通道选择*/
|
|||
|
|
|
|||
|
|
}stc_adc_threshold_cfg_t;
|
|||
|
|
/**
|
|||
|
|
******************************************************************************
|
|||
|
|
** \brief ADC中断回调函数
|
|||
|
|
*****************************************************************************/
|
|||
|
|
typedef struct stc_adc_irq_calbakfn_pt
|
|||
|
|
{
|
|||
|
|
/*! ADC插队扫描中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcJQRIrq;
|
|||
|
|
/*! ADC顺序扫描中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcSQRIrq;
|
|||
|
|
/*! ADC区间中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcRegIrq;
|
|||
|
|
/*! ADC上超出区间中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcHhtIrq;
|
|||
|
|
/*! ADC下超出区间中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcLltIrq;
|
|||
|
|
/*! ADC单次转换中断回调函数指针*/
|
|||
|
|
func_ptr_t pfnAdcIrq;
|
|||
|
|
}stc_adc_irq_calbakfn_pt_t;
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global variable definitions ('extern')
|
|||
|
|
******************************************************************************/
|
|||
|
|
|
|||
|
|
/******************************************************************************
|
|||
|
|
* Global function prototypes (definition in C source)
|
|||
|
|
******************************************************************************/
|
|||
|
|
//ADC initialization
|
|||
|
|
en_result_t Adc_Init(stc_adc_cfg_t* pstcAdcConfig);
|
|||
|
|
//ADC ExtTrig Register config
|
|||
|
|
en_result_t Adc_ExtTrigCfg(stc_adc_ext_trig_cfg_t* pstcExtTrigConfig);
|
|||
|
|
//ADC de-init
|
|||
|
|
void Adc_DeInit(void);
|
|||
|
|
|
|||
|
|
//ADC conversion start
|
|||
|
|
void Adc_SGL_Start(void);
|
|||
|
|
//ADC conversion stop
|
|||
|
|
void Adc_SGL_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC SQR conversion start
|
|||
|
|
void Adc_SQR_Start(void);
|
|||
|
|
//ADC SQR conversion stop
|
|||
|
|
void Adc_SQR_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC JQR conversion start
|
|||
|
|
void Adc_JQR_Start(void);
|
|||
|
|
//ADC JQR conversion stop
|
|||
|
|
void Adc_JQR_Stop(void);
|
|||
|
|
|
|||
|
|
//ADC conversion enable
|
|||
|
|
void Adc_Enable(void);
|
|||
|
|
//ADC conversion disable
|
|||
|
|
void Adc_Disable(void);
|
|||
|
|
|
|||
|
|
//ADC single covert mode configuration
|
|||
|
|
en_result_t Adc_ConfigSglMode(stc_adc_cfg_t* pstcAdcConfig);
|
|||
|
|
//ADC SQR mode configuration
|
|||
|
|
en_result_t Adc_ConfigSqrMode(stc_adc_cfg_t* pstcAdcConfig, uint8_t u8AdcSampCnt,boolean_t bAdcResultAccEn);
|
|||
|
|
//ADC JQR mode configuration
|
|||
|
|
en_result_t Adc_ConfigJqrMode(stc_adc_cfg_t* pstcAdcConfig, uint8_t u8AdcSampCnt,boolean_t bAdcResultAccEn);
|
|||
|
|
|
|||
|
|
//ADC single covert mode channel configuraion
|
|||
|
|
en_result_t Adc_ConfigSglChannel( en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
//ADC SQR mode channel configuraion
|
|||
|
|
en_result_t Adc_ConfigSqrChannel(en_adc_sqr_chmux_t enstcAdcSqrChMux, en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
//ADC JQR mode channel configuraion
|
|||
|
|
en_result_t Adc_ConfigJqrChannel(en_adc_jqr_chmux_t enstcAdcJqrChMux, en_adc_samp_ch_sel_t enstcAdcSampCh);
|
|||
|
|
//ADC DMA Trigger
|
|||
|
|
en_result_t Adc_ConfigDmaTrig(en_adc_dmatrig_t enAdcDmaTrig);
|
|||
|
|
//ADC IRQ configuration
|
|||
|
|
void Adc_ConfigIrq(stc_adc_irq_t* pstcAdcIrqCfg,
|
|||
|
|
stc_adc_irq_calbakfn_pt_t* pstcAdcIrqCalbaks);
|
|||
|
|
//ADC enable IRQ
|
|||
|
|
void Adc_EnableIrq(void);
|
|||
|
|
//ADC disable IRQ
|
|||
|
|
void Adc_DisableIrq(void);
|
|||
|
|
//ADC enable threshold compare
|
|||
|
|
void Adc_ThresholdCfg(stc_adc_threshold_cfg_t* stcAdcThrCfg);
|
|||
|
|
//ADC get IRQ state
|
|||
|
|
void Adc_GetIrqState(stc_adc_irq_t* pstcAdcIrqState);
|
|||
|
|
//ADC clear IRQ states
|
|||
|
|
void Adc_ClrSglIrqState(void);
|
|||
|
|
void Adc_ClrJqrIrqState(void);
|
|||
|
|
void Adc_ClrSqrIrqState(void);
|
|||
|
|
void Adc_ClrRegIrqState(void);
|
|||
|
|
void Adc_ClrHtIrqState(void);
|
|||
|
|
void Adc_ClrLtIrqState(void);
|
|||
|
|
|
|||
|
|
//查询ADC单次转换状态
|
|||
|
|
boolean_t Adc_PollSglBusyState(void);
|
|||
|
|
//查询ADC顺序扫描转换转换状态
|
|||
|
|
boolean_t Adc_PollSqrBusyState(void);
|
|||
|
|
//查询ADC插队扫描转换状态
|
|||
|
|
boolean_t Adc_PollJqrBusyState(void);
|
|||
|
|
//查询ADC结果比较区间状态
|
|||
|
|
boolean_t Adc_PollRegBusyState(void);
|
|||
|
|
//查询ADC结果比较上阈值状态
|
|||
|
|
boolean_t Adc_PollHTBusyState(void);
|
|||
|
|
//查询ADC结果比较下阈值状态
|
|||
|
|
boolean_t Adc_PollLtBusyState(void);
|
|||
|
|
//获取单次转换采样值
|
|||
|
|
en_result_t Adc_GetSglResult(uint16_t* pu16AdcResult);
|
|||
|
|
//获取顺序扫描采样值
|
|||
|
|
en_result_t Adc_GetSqrResult(uint16_t* pu16AdcResult,uint8_t SQRChannelIndex);
|
|||
|
|
//获取插队扫描采样值
|
|||
|
|
en_result_t Adc_GetJqrResult(uint16_t* pu16AdcResult,uint8_t JQRChannelIndex);
|
|||
|
|
//获取累加采样值
|
|||
|
|
en_result_t Adc_GetAccResult(uint32_t* pu32AdcAccResult);
|
|||
|
|
//clear ADC accumulated result
|
|||
|
|
void Adc_ClrAccResult(void);
|
|||
|
|
//设置参考电压
|
|||
|
|
en_result_t Adc_SetVref(en_adc_ref_vol_sel_t enAdcRefVolSel);
|
|||
|
|
//设置结果对齐方式
|
|||
|
|
en_result_t Adc_SetAlign(en_adc_align_t enAlign);
|
|||
|
|
//@}
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
}
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
#endif /* __ADC_H__ */
|
|||
|
|
/******************************************************************************/
|
|||
|
|
/* EOF (not truncated) */
|
|||
|
|
/******************************************************************************/
|