rt-thread-official/bsp/efm32/board.c

417 lines
13 KiB
C
Raw Normal View History

2013-01-08 22:40:58 +08:00
/***************************************************************************//**
* @file board.c
* @brief Board support of RT-Thread RTOS for EFM32
* COPYRIGHT (C) 2012, RT-Thread Development Team
* @author onelife
* @version 1.0
*******************************************************************************
* @section License
* The license and distribution terms for this file may be found in the file
* LICENSE in this distribution or at http://www.rt-thread.org/license/LICENSE
*******************************************************************************
* @section Change Logs
* Date Author Notes
* 2010-12-21 onelife Initial creation for EFM32
* 2011-05-06 onelife Add EFM32 development kit and SPI Flash support
* 2011-07-12 onelife Add SWO output enable function
* 2011-12-08 onelife Add giant gecko development kit support
* 2011-12-09 onelife Add giant gecko support
* 2011-12-09 onelife Add LEUART module support
* 2011-12-14 onelife Add LFXO enabling routine in driver initialization
* function
* 2011-12-15 onelife Add MicroSD initialization routine in driver
* initialization function
* 2011-12-29 onelife Add keys and joystick initialization routine in
* driver initialization function
* 2012-02-15 onelife Modify SWO setup function to support giant gecko
* 2012-xx-xx onelife Modify system clock and ticket related code
******************************************************************************/
/***************************************************************************//**
* @addtogroup efm32
* @{
******************************************************************************/
/* Includes ------------------------------------------------------------------*/
#include "board.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == RAM_MEM_BASE) || \
((VECTTAB) == FLASH_MEM_BASE))
#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
/***************************************************************************//**
* @addtogroup SysTick_clock_source
* @{
******************************************************************************/
#define SysTick_CLKSource_MASK ((rt_uint32_t)0x00000004)
#define SysTick_CLKSource_RTC ((rt_uint32_t)0x00000000)
#define SysTick_CLKSource_HFCORECLK ((rt_uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_RTC) || \
((SOURCE) == SysTick_CLKSource_HFCORECLK))
/***************************************************************************//**
* @}
******************************************************************************/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/***************************************************************************//**
* @brief
* Set the allocation and offset of the vector table
*
* @details
*
* @note
*
* @param[in] NVIC_VectTab
* Indicate the vector table is allocated in RAM or ROM
*
* @param[in] Offset
* The vector table offset
******************************************************************************/
static void NVIC_SetVectorTable(
rt_uint32_t NVIC_VectTab,
rt_uint32_t Offset)
{
/* Check the parameters */
RT_ASSERT(IS_NVIC_VECTTAB(NVIC_VectTab));
RT_ASSERT(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (rt_uint32_t)0x1FFFFF80);
}
/***************************************************************************//**
* @brief
* Configure the address of vector table
*
* @details
*
* @note
*
******************************************************************************/
static void NVIC_Configuration(void)
{
#ifdef VECT_TAB_RAM
/* Set the vector table allocated at 0x20000000 */
NVIC_SetVectorTable(RAM_MEM_BASE, 0x0);
#else /* VECT_TAB_FLASH */
/* Set the vector table allocated at 0x00000000 */
NVIC_SetVectorTable(FLASH_MEM_BASE, 0x0);
#endif
/* Set NVIC Preemption Priority Bits: 0 bit for pre-emption, 4 bits for
subpriority */
NVIC_SetPriorityGrouping(0x7UL);
/* Set Base Priority Mask Register */
__set_BASEPRI(EFM32_BASE_PRI_DEFAULT);
}
/***************************************************************************//**
* @brief
* Configure the SysTick clock source
*
* @details
*
* @note
*
* @param[in] SysTick_CLKSource
* Specifies the SysTick clock source.
*
* @arg SysTick_CLKSource_HCLK_Div8
* AHB clock divided by 8 selected as SysTick clock source.
*
* @arg SysTick_CLKSource_HCLK
* AHB clock selected as SysTick clock source.
******************************************************************************/
static void SysTick_CLKSourceConfig(rt_uint32_t SysTick_CLKSource)
{
/* Check the parameters */
RT_ASSERT(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
rt_uint32_t ctrl = SysTick->CTRL;
ctrl &= ~SysTick_CLKSource_MASK;
ctrl |= SysTick_CLKSource;
SysTick->CTRL = ctrl;
}
/***************************************************************************//**
* @brief
* Configure the SysTick for OS tick.
*
* @details
*
* @note
*
******************************************************************************/
static void SysTick_Configuration(void)
{
#if defined(EFM32_USING_LFXO)
/* LETIMER0 configurations */
const LETIMER_Init_TypeDef letimerInit =
{
.enable = true, /* Start counting when init completed. */
.debugRun = false, /* Counter shall not keep running during debug halt. */
.rtcComp0Enable = false, /* Don't start counting on RTC COMP0 match. */
.rtcComp1Enable = false, /* Don't start counting on RTC COMP1 match. */
.comp0Top = true, /* Load COMP0 register into CNT when counter underflows. COMP is used as TOP */
.bufTop = false, /* Don't load COMP1 into COMP0 when REP0 reaches 0. */
.out0Pol = 0, /* Idle value for output 0. */
.out1Pol = 0, /* Idle value for output 1. */
.ufoa0 = letimerUFOANone, /* No output on output 0. */
.ufoa1 = letimerUFOANone, /* No output on output 1. */
.repMode = letimerRepeatFree /* Count until stopped by SW. */
};
CMU_ClockDivSet(cmuClock_LETIMER0, cmuClkDiv_8);
CMU_ClockEnable(cmuClock_LETIMER0, true);
LETIMER_CompareSet(LETIMER0, 0,
EFM32_LETIMER_TOP_100HZ * RT_TICK_PER_SECOND / 100);
/* Enable underflow interrupt */
LETIMER_IntClear(LETIMER0, LETIMER_IF_UF);
LETIMER_IntEnable(LETIMER0, LETIMER_IF_UF);
/* Enable LETIMER0 interrupt vector in NVIC */
NVIC_ClearPendingIRQ(LETIMER0_IRQn);
NVIC_SetPriority(LETIMER0_IRQn, EFM32_IRQ_PRI_DEFAULT);
NVIC_EnableIRQ(LETIMER0_IRQn);
/* Start LETIMER0 */
LETIMER_Init(LETIMER0, &letimerInit);
#else
rt_uint32_t coreClk;
rt_uint32_t cnts;
coreClk = SystemCoreClockGet();
cnts = coreClk / RT_TICK_PER_SECOND;
SysTick_Config(cnts);
SysTick_CLKSourceConfig(SysTick_CLKSource_HFCORECLK);
#endif
}
/***************************************************************************//**
* @brief
* Enable SWO.
*
* @details
*
* @note
*
******************************************************************************/
void Swo_Configuration(void)
{
rt_uint32_t *dwt_ctrl = (rt_uint32_t *) 0xE0001000;
rt_uint32_t *tpiu_prescaler = (rt_uint32_t *) 0xE0040010;
rt_uint32_t *tpiu_protocol = (rt_uint32_t *) 0xE00400F0;
CMU->HFPERCLKEN0 |= CMU_HFPERCLKEN0_GPIO;
/* Enable Serial wire output pin */
GPIO->ROUTE |= GPIO_ROUTE_SWOPEN;
#if defined(_EFM32_GIANT_FAMILY)
/* Set location 0 */
GPIO->ROUTE = (GPIO->ROUTE & ~(_GPIO_ROUTE_SWLOCATION_MASK)) | GPIO_ROUTE_SWLOCATION_LOC0;
/* Enable output on pin - GPIO Port F, Pin 2 */
GPIO->P[5].MODEL &= ~(_GPIO_P_MODEL_MODE2_MASK);
GPIO->P[5].MODEL |= GPIO_P_MODEL_MODE2_PUSHPULL;
#else
/* Set location 1 */
GPIO->ROUTE = (GPIO->ROUTE & ~(_GPIO_ROUTE_SWLOCATION_MASK)) | GPIO_ROUTE_SWLOCATION_LOC1;
/* Enable output on pin */
GPIO->P[2].MODEH &= ~(_GPIO_P_MODEH_MODE15_MASK);
GPIO->P[2].MODEH |= GPIO_P_MODEH_MODE15_PUSHPULL;
#endif
/* Enable debug clock AUXHFRCO */
CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCOEN;
while(!(CMU->STATUS & CMU_STATUS_AUXHFRCORDY));
/* Enable trace in core debug */
CoreDebug->DHCSR |= 1;
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
/* Enable PC and IRQ sampling output */
*dwt_ctrl = 0x400113FF;
/* Set TPIU prescaler to 16. */
*tpiu_prescaler = 0xf;
/* Set protocol to NRZ */
*tpiu_protocol = 2;
/* Unlock ITM and output data */
ITM->LAR = 0xC5ACCE55;
ITM->TCR = 0x10009;
}
/***************************************************************************//**
* @brief
* Initialize the board.
*
* @details
*
* @note
*
******************************************************************************/
void rt_hw_board_init(void)
{
/* Chip errata */
CHIP_Init();
/* Initialize DVK board register access */
#if defined(EFM32_GXXX_DK)
DVK_init();
#elif defined(EFM32GG_DK3750)
DVK_init(DVK_Init_EBI);
/* Disable all DVK interrupts */
DVK_disableInterrupt(BC_INTEN_MASK);
DVK_clearInterruptFlags(BC_INTFLAG_MASK);
#endif
/* config NVIC Configuration */
NVIC_Configuration();
#if defined(EFM32_USING_HFXO)
/* Configure external oscillator */
SystemHFXOClockSet(EFM32_HFXO_FREQUENCY);
/* Switching the CPU clock source to HFXO */
CMU_ClockSelectSet(cmuClock_HF, cmuSelect_HFXO);
/* Turning off the high frequency RC Oscillator (HFRCO) */
CMU_OscillatorEnable(cmuOsc_HFRCO, false, false);
#endif
#if defined(EFM32_USING_LFXO)
CMU_ClockSelectSet(cmuClock_LFA,cmuSelect_LFXO);
CMU_ClockSelectSet(cmuClock_LFB, cmuSelect_LFXO);
#endif
#if defined(EFM32_SWO_ENABLE)
/* Enable SWO */
Swo_Configuration();
#endif
/* Enable high frequency peripheral clock */
CMU_ClockEnable(cmuClock_HFPER, true);
/* Enabling clock to the interface of the low energy modules */
CMU_ClockEnable(cmuClock_CORELE, true);
/* Enable GPIO clock */
CMU_ClockEnable(cmuClock_GPIO, true);
/* Configure the SysTick */
SysTick_Configuration();
}
/***************************************************************************//**
* @brief
* Initialize the hardware drivers.
*
* @details
*
* @note
*
******************************************************************************/
void rt_hw_driver_init(void)
{
/* Initialize DMA */
rt_hw_dma_init();
/* Select LFXO for specified module (and wait for it to stabilize) */
#if (!defined(EFM32_USING_LFXO) && defined(RT_USING_RTC))
#error "Low frequency clock source is needed for using RTC"
#endif
#if (!defined(EFM32_USING_LFXO )&& \
(defined(RT_USING_LEUART0) || defined(RT_USING_LEUART1)))
#error "Low frequency clock source is needed for using LEUART"
#endif
/* Initialize USART */
#if (defined(RT_USING_USART0) || defined(RT_USING_USART1) || \
defined(RT_USING_USART2) || defined(RT_USING_UART0) || \
defined(RT_USING_UART1))
rt_hw_usart_init();
#endif
/* Initialize LEUART */
#if (defined(RT_USING_LEUART0) || defined(RT_USING_LEUART1))
rt_hw_leuart_init();
#endif
/* Setup Console */
#if defined(EFM32_GXXX_DK)
DVK_enablePeripheral(DVK_RS232A);
DVK_enablePeripheral(DVK_SPI);
#elif defined(EFM32GG_DK3750)
#if (RT_CONSOLE_DEVICE == EFM_UART1)
DVK_enablePeripheral(DVK_RS232_UART);
#elif (RT_CONSOLE_DEVICE == EFM_LEUART1)
DVK_enablePeripheral(DVK_RS232_LEUART);
#endif
#endif
rt_console_set_device(CONSOLE_DEVICE);
/* Initialize Timer */
#if (defined(RT_USING_TIMER0) || defined(RT_USING_TIMER1) || defined(RT_USING_TIMER2))
rt_hw_timer_init();
#endif
/* Initialize ADC */
#if defined(RT_USING_ADC0)
rt_hw_adc_init();
#endif
/* Initialize ACMP */
#if (defined(RT_USING_ACMP0) || defined(RT_USING_ACMP1))
rt_hw_acmp_init();
#endif
/* Initialize IIC */
#if (defined(RT_USING_IIC0) || defined(RT_USING_IIC1))
rt_hw_iic_init();
#endif
/* Initialize RTC */
#if defined(RT_USING_RTC)
rt_hw_rtc_init();
#endif
/* Enable SPI access to MicroSD card */
#if defined(EFM32_USING_SPISD)
#if defined(EFM32_GXXX_DK)
DVK_writeRegister(BC_SPI_CFG, 1);
#elif defined(EFM32GG_DK3750)
DVK_enablePeripheral(DVK_MICROSD);
#endif
#endif
/* Enable SPI access to Ethernet */
#if defined(EFM32_USING_ETHERNET)
#if defined(EFM32GG_DK3750)
DVK_enablePeripheral(DVK_ETH);
#endif
#endif
/* Initialize LCD */
#if defined(EFM32_USING_LCD)
efm32_spiLcd_init();
#endif
/* Initialize Keys */
#if defined(EFM32_USING_KEYS)
#if defined(EFM32GG_DK3750)
efm32_hw_keys_init();
#endif
#endif
}
/***************************************************************************//**
* @}
******************************************************************************/