rt-thread-official/bsp/frdm-k64f/device/MK64F12/MK64F12_axbs.h

1079 lines
42 KiB
C
Raw Normal View History

2014-06-29 00:34:20 +08:00
/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_AXBS_REGISTERS_H__
#define __HW_AXBS_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 AXBS
*
* Crossbar switch
*
* Registers defined in this header file:
* - HW_AXBS_PRSn - Priority Registers Slave
* - HW_AXBS_CRSn - Control Register
* - HW_AXBS_MGPCR0 - Master General Purpose Control Register
* - HW_AXBS_MGPCR1 - Master General Purpose Control Register
* - HW_AXBS_MGPCR2 - Master General Purpose Control Register
* - HW_AXBS_MGPCR3 - Master General Purpose Control Register
* - HW_AXBS_MGPCR4 - Master General Purpose Control Register
* - HW_AXBS_MGPCR5 - Master General Purpose Control Register
*
* - hw_axbs_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_AXBS_BASE
#define HW_AXBS_INSTANCE_COUNT (1U) //!< Number of instances of the AXBS module.
#define REGS_AXBS_BASE (0x40004000U) //!< Base address for AXBS.
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_PRSn - Priority Registers Slave
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_PRSn - Priority Registers Slave (RW)
*
* Reset value: 0x00543210U
*
* The priority registers (PRSn) set the priority of each master port on a per
* slave port basis and reside in each slave port. The priority register can be
* accessed only with 32-bit accesses. After the CRSn[RO] bit is set, the PRSn
* register can only be read; attempts to write to it have no effect on PRSn and
* result in a bus-error response to the master initiating the write. Two available
* masters must not be programmed with the same priority level. Attempts to
* program two or more masters with the same priority level result in a bus-error
* response and the PRSn is not updated. Valid values for the Mn priority fields
* depend on which masters are available on the chip. This information can be found in
* the chip-specific information for the crossbar. If the chip contains less
* than five masters, values 0 to 3 are valid. Writing other values will result in
* an error. If the chip contains five or more masters, valid values are 0 to n-1,
* where n is the number of masters attached to the AXBS module. Other values
* will result in an error.
*/
typedef union _hw_axbs_prsn
{
uint32_t U;
struct _hw_axbs_prsn_bitfields
{
uint32_t M0 : 3; //!< [2:0] Master 0 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED0 : 1; //!< [3]
uint32_t M1 : 3; //!< [6:4] Master 1 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED1 : 1; //!< [7]
uint32_t M2 : 3; //!< [10:8] Master 2 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED2 : 1; //!< [11]
uint32_t M3 : 3; //!< [14:12] Master 3 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED3 : 1; //!< [15]
uint32_t M4 : 3; //!< [18:16] Master 4 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED4 : 1; //!< [19]
uint32_t M5 : 3; //!< [22:20] Master 5 Priority. Sets the arbitration
//! priority for this port on the associated slave port.
uint32_t RESERVED5 : 9; //!< [31:23]
} B;
} hw_axbs_prsn_t;
#endif
/*!
* @name Constants and macros for entire AXBS_PRSn register
*/
//@{
#define HW_AXBS_PRSn_COUNT (5U)
#define HW_AXBS_PRSn_ADDR(n) (REGS_AXBS_BASE + 0x0U + (0x100U * n))
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_PRSn(n) (*(__IO hw_axbs_prsn_t *) HW_AXBS_PRSn_ADDR(n))
#define HW_AXBS_PRSn_RD(n) (HW_AXBS_PRSn(n).U)
#define HW_AXBS_PRSn_WR(n, v) (HW_AXBS_PRSn(n).U = (v))
#define HW_AXBS_PRSn_SET(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) | (v)))
#define HW_AXBS_PRSn_CLR(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) & ~(v)))
#define HW_AXBS_PRSn_TOG(n, v) (HW_AXBS_PRSn_WR(n, HW_AXBS_PRSn_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_PRSn bitfields
*/
/*!
* @name Register AXBS_PRSn, field M0[2:0] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M0 (0U) //!< Bit position for AXBS_PRSn_M0.
#define BM_AXBS_PRSn_M0 (0x00000007U) //!< Bit mask for AXBS_PRSn_M0.
#define BS_AXBS_PRSn_M0 (3U) //!< Bit field size in bits for AXBS_PRSn_M0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M0 field.
#define BR_AXBS_PRSn_M0(n) (HW_AXBS_PRSn(n).B.M0)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M0.
#define BF_AXBS_PRSn_M0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M0), uint32_t) & BM_AXBS_PRSn_M0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M0 field to a new value.
#define BW_AXBS_PRSn_M0(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M0) | BF_AXBS_PRSn_M0(v)))
#endif
//@}
/*!
* @name Register AXBS_PRSn, field M1[6:4] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M1 (4U) //!< Bit position for AXBS_PRSn_M1.
#define BM_AXBS_PRSn_M1 (0x00000070U) //!< Bit mask for AXBS_PRSn_M1.
#define BS_AXBS_PRSn_M1 (3U) //!< Bit field size in bits for AXBS_PRSn_M1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M1 field.
#define BR_AXBS_PRSn_M1(n) (HW_AXBS_PRSn(n).B.M1)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M1.
#define BF_AXBS_PRSn_M1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M1), uint32_t) & BM_AXBS_PRSn_M1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M1 field to a new value.
#define BW_AXBS_PRSn_M1(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M1) | BF_AXBS_PRSn_M1(v)))
#endif
//@}
/*!
* @name Register AXBS_PRSn, field M2[10:8] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M2 (8U) //!< Bit position for AXBS_PRSn_M2.
#define BM_AXBS_PRSn_M2 (0x00000700U) //!< Bit mask for AXBS_PRSn_M2.
#define BS_AXBS_PRSn_M2 (3U) //!< Bit field size in bits for AXBS_PRSn_M2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M2 field.
#define BR_AXBS_PRSn_M2(n) (HW_AXBS_PRSn(n).B.M2)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M2.
#define BF_AXBS_PRSn_M2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M2), uint32_t) & BM_AXBS_PRSn_M2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M2 field to a new value.
#define BW_AXBS_PRSn_M2(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M2) | BF_AXBS_PRSn_M2(v)))
#endif
//@}
/*!
* @name Register AXBS_PRSn, field M3[14:12] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M3 (12U) //!< Bit position for AXBS_PRSn_M3.
#define BM_AXBS_PRSn_M3 (0x00007000U) //!< Bit mask for AXBS_PRSn_M3.
#define BS_AXBS_PRSn_M3 (3U) //!< Bit field size in bits for AXBS_PRSn_M3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M3 field.
#define BR_AXBS_PRSn_M3(n) (HW_AXBS_PRSn(n).B.M3)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M3.
#define BF_AXBS_PRSn_M3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M3), uint32_t) & BM_AXBS_PRSn_M3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M3 field to a new value.
#define BW_AXBS_PRSn_M3(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M3) | BF_AXBS_PRSn_M3(v)))
#endif
//@}
/*!
* @name Register AXBS_PRSn, field M4[18:16] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M4 (16U) //!< Bit position for AXBS_PRSn_M4.
#define BM_AXBS_PRSn_M4 (0x00070000U) //!< Bit mask for AXBS_PRSn_M4.
#define BS_AXBS_PRSn_M4 (3U) //!< Bit field size in bits for AXBS_PRSn_M4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M4 field.
#define BR_AXBS_PRSn_M4(n) (HW_AXBS_PRSn(n).B.M4)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M4.
#define BF_AXBS_PRSn_M4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M4), uint32_t) & BM_AXBS_PRSn_M4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M4 field to a new value.
#define BW_AXBS_PRSn_M4(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M4) | BF_AXBS_PRSn_M4(v)))
#endif
//@}
/*!
* @name Register AXBS_PRSn, field M5[22:20] (RW)
*
* Values:
* - 000 - This master has level 1, or highest, priority when accessing the
* slave port.
* - 001 - This master has level 2 priority when accessing the slave port.
* - 010 - This master has level 3 priority when accessing the slave port.
* - 011 - This master has level 4 priority when accessing the slave port.
* - 100 - This master has level 5 priority when accessing the slave port.
* - 101 - This master has level 6 priority when accessing the slave port.
* - 110 - This master has level 7 priority when accessing the slave port.
* - 111 - This master has level 8, or lowest, priority when accessing the slave
* port.
*/
//@{
#define BP_AXBS_PRSn_M5 (20U) //!< Bit position for AXBS_PRSn_M5.
#define BM_AXBS_PRSn_M5 (0x00700000U) //!< Bit mask for AXBS_PRSn_M5.
#define BS_AXBS_PRSn_M5 (3U) //!< Bit field size in bits for AXBS_PRSn_M5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_PRSn_M5 field.
#define BR_AXBS_PRSn_M5(n) (HW_AXBS_PRSn(n).B.M5)
#endif
//! @brief Format value for bitfield AXBS_PRSn_M5.
#define BF_AXBS_PRSn_M5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_PRSn_M5), uint32_t) & BM_AXBS_PRSn_M5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the M5 field to a new value.
#define BW_AXBS_PRSn_M5(n, v) (HW_AXBS_PRSn_WR(n, (HW_AXBS_PRSn_RD(n) & ~BM_AXBS_PRSn_M5) | BF_AXBS_PRSn_M5(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_CRSn - Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_CRSn - Control Register (RW)
*
* Reset value: 0x00000000U
*
* These registers control several features of each slave port and must be
* accessed using 32-bit accesses. After CRSn[RO] is set, the PRSn can only be read;
* attempts to write to it have no effect and result in an error response.
*/
typedef union _hw_axbs_crsn
{
uint32_t U;
struct _hw_axbs_crsn_bitfields
{
uint32_t PARK : 3; //!< [2:0] Park
uint32_t RESERVED0 : 1; //!< [3]
uint32_t PCTL : 2; //!< [5:4] Parking Control
uint32_t RESERVED1 : 2; //!< [7:6]
uint32_t ARB : 2; //!< [9:8] Arbitration Mode
uint32_t RESERVED2 : 20; //!< [29:10]
uint32_t HLP : 1; //!< [30] Halt Low Priority
uint32_t RO : 1; //!< [31] Read Only
} B;
} hw_axbs_crsn_t;
#endif
/*!
* @name Constants and macros for entire AXBS_CRSn register
*/
//@{
#define HW_AXBS_CRSn_COUNT (5U)
#define HW_AXBS_CRSn_ADDR(n) (REGS_AXBS_BASE + 0x10U + (0x100U * n))
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_CRSn(n) (*(__IO hw_axbs_crsn_t *) HW_AXBS_CRSn_ADDR(n))
#define HW_AXBS_CRSn_RD(n) (HW_AXBS_CRSn(n).U)
#define HW_AXBS_CRSn_WR(n, v) (HW_AXBS_CRSn(n).U = (v))
#define HW_AXBS_CRSn_SET(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) | (v)))
#define HW_AXBS_CRSn_CLR(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) & ~(v)))
#define HW_AXBS_CRSn_TOG(n, v) (HW_AXBS_CRSn_WR(n, HW_AXBS_CRSn_RD(n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_CRSn bitfields
*/
/*!
* @name Register AXBS_CRSn, field PARK[2:0] (RW)
*
* Determines which master port the current slave port parks on when no masters
* are actively making requests and the PCTL bits are cleared. Select only master
* ports that are present on the chip. Otherwise, undefined behavior might occur.
*
* Values:
* - 000 - Park on master port M0
* - 001 - Park on master port M1
* - 010 - Park on master port M2
* - 011 - Park on master port M3
* - 100 - Park on master port M4
* - 101 - Park on master port M5
* - 110 - Park on master port M6
* - 111 - Park on master port M7
*/
//@{
#define BP_AXBS_CRSn_PARK (0U) //!< Bit position for AXBS_CRSn_PARK.
#define BM_AXBS_CRSn_PARK (0x00000007U) //!< Bit mask for AXBS_CRSn_PARK.
#define BS_AXBS_CRSn_PARK (3U) //!< Bit field size in bits for AXBS_CRSn_PARK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_CRSn_PARK field.
#define BR_AXBS_CRSn_PARK(n) (HW_AXBS_CRSn(n).B.PARK)
#endif
//! @brief Format value for bitfield AXBS_CRSn_PARK.
#define BF_AXBS_CRSn_PARK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_PARK), uint32_t) & BM_AXBS_CRSn_PARK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the PARK field to a new value.
#define BW_AXBS_CRSn_PARK(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_PARK) | BF_AXBS_CRSn_PARK(v)))
#endif
//@}
/*!
* @name Register AXBS_CRSn, field PCTL[5:4] (RW)
*
* Determines the slave port's parking control. The low-power park feature
* results in an overall power savings if the slave port is not saturated. However,
* this forces an extra latency clock when any master tries to access the slave
* port while not in use because it is not parked on any master.
*
* Values:
* - 00 - When no master makes a request, the arbiter parks the slave port on
* the master port defined by the PARK field
* - 01 - When no master makes a request, the arbiter parks the slave port on
* the last master to be in control of the slave port
* - 10 - When no master makes a request, the slave port is not parked on a
* master and the arbiter drives all outputs to a constant safe state
* - 11 - Reserved
*/
//@{
#define BP_AXBS_CRSn_PCTL (4U) //!< Bit position for AXBS_CRSn_PCTL.
#define BM_AXBS_CRSn_PCTL (0x00000030U) //!< Bit mask for AXBS_CRSn_PCTL.
#define BS_AXBS_CRSn_PCTL (2U) //!< Bit field size in bits for AXBS_CRSn_PCTL.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_CRSn_PCTL field.
#define BR_AXBS_CRSn_PCTL(n) (HW_AXBS_CRSn(n).B.PCTL)
#endif
//! @brief Format value for bitfield AXBS_CRSn_PCTL.
#define BF_AXBS_CRSn_PCTL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_PCTL), uint32_t) & BM_AXBS_CRSn_PCTL)
#ifndef __LANGUAGE_ASM__
//! @brief Set the PCTL field to a new value.
#define BW_AXBS_CRSn_PCTL(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_PCTL) | BF_AXBS_CRSn_PCTL(v)))
#endif
//@}
/*!
* @name Register AXBS_CRSn, field ARB[9:8] (RW)
*
* Selects the arbitration policy for the slave port.
*
* Values:
* - 00 - Fixed priority
* - 01 - Round-robin, or rotating, priority
* - 10 - Reserved
* - 11 - Reserved
*/
//@{
#define BP_AXBS_CRSn_ARB (8U) //!< Bit position for AXBS_CRSn_ARB.
#define BM_AXBS_CRSn_ARB (0x00000300U) //!< Bit mask for AXBS_CRSn_ARB.
#define BS_AXBS_CRSn_ARB (2U) //!< Bit field size in bits for AXBS_CRSn_ARB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_CRSn_ARB field.
#define BR_AXBS_CRSn_ARB(n) (HW_AXBS_CRSn(n).B.ARB)
#endif
//! @brief Format value for bitfield AXBS_CRSn_ARB.
#define BF_AXBS_CRSn_ARB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_ARB), uint32_t) & BM_AXBS_CRSn_ARB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ARB field to a new value.
#define BW_AXBS_CRSn_ARB(n, v) (HW_AXBS_CRSn_WR(n, (HW_AXBS_CRSn_RD(n) & ~BM_AXBS_CRSn_ARB) | BF_AXBS_CRSn_ARB(v)))
#endif
//@}
/*!
* @name Register AXBS_CRSn, field HLP[30] (RW)
*
* Sets the initial arbitration priority for low power mode requests . Setting
* this bit will not affect the request for low power mode from attaining highest
* priority once it has control of the slave ports.
*
* Values:
* - 0 - The low power mode request has the highest priority for arbitration on
* this slave port
* - 1 - The low power mode request has the lowest initial priority for
* arbitration on this slave port
*/
//@{
#define BP_AXBS_CRSn_HLP (30U) //!< Bit position for AXBS_CRSn_HLP.
#define BM_AXBS_CRSn_HLP (0x40000000U) //!< Bit mask for AXBS_CRSn_HLP.
#define BS_AXBS_CRSn_HLP (1U) //!< Bit field size in bits for AXBS_CRSn_HLP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_CRSn_HLP field.
#define BR_AXBS_CRSn_HLP(n) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_HLP))
#endif
//! @brief Format value for bitfield AXBS_CRSn_HLP.
#define BF_AXBS_CRSn_HLP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_HLP), uint32_t) & BM_AXBS_CRSn_HLP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the HLP field to a new value.
#define BW_AXBS_CRSn_HLP(n, v) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_HLP) = (v))
#endif
//@}
/*!
* @name Register AXBS_CRSn, field RO[31] (RW)
*
* Forces the slave port's CSRn and PRSn registers to be read-only. After set,
* only a hardware reset clears it.
*
* Values:
* - 0 - The slave port's registers are writeable
* - 1 - The slave port's registers are read-only and cannot be written.
* Attempted writes have no effect on the registers and result in a bus error
* response.
*/
//@{
#define BP_AXBS_CRSn_RO (31U) //!< Bit position for AXBS_CRSn_RO.
#define BM_AXBS_CRSn_RO (0x80000000U) //!< Bit mask for AXBS_CRSn_RO.
#define BS_AXBS_CRSn_RO (1U) //!< Bit field size in bits for AXBS_CRSn_RO.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_CRSn_RO field.
#define BR_AXBS_CRSn_RO(n) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_RO))
#endif
//! @brief Format value for bitfield AXBS_CRSn_RO.
#define BF_AXBS_CRSn_RO(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_CRSn_RO), uint32_t) & BM_AXBS_CRSn_RO)
#ifndef __LANGUAGE_ASM__
//! @brief Set the RO field to a new value.
#define BW_AXBS_CRSn_RO(n, v) (BITBAND_ACCESS32(HW_AXBS_CRSn_ADDR(n), BP_AXBS_CRSn_RO) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR0 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR0 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr0
{
uint32_t U;
struct _hw_axbs_mgpcr0_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr0_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR0 register
*/
//@{
#define HW_AXBS_MGPCR0_ADDR (REGS_AXBS_BASE + 0x800U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR0 (*(__IO hw_axbs_mgpcr0_t *) HW_AXBS_MGPCR0_ADDR)
#define HW_AXBS_MGPCR0_RD() (HW_AXBS_MGPCR0.U)
#define HW_AXBS_MGPCR0_WR(v) (HW_AXBS_MGPCR0.U = (v))
#define HW_AXBS_MGPCR0_SET(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() | (v)))
#define HW_AXBS_MGPCR0_CLR(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() & ~(v)))
#define HW_AXBS_MGPCR0_TOG(v) (HW_AXBS_MGPCR0_WR(HW_AXBS_MGPCR0_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR0 bitfields
*/
/*!
* @name Register AXBS_MGPCR0, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR0_AULB (0U) //!< Bit position for AXBS_MGPCR0_AULB.
#define BM_AXBS_MGPCR0_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR0_AULB.
#define BS_AXBS_MGPCR0_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR0_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR0_AULB field.
#define BR_AXBS_MGPCR0_AULB (HW_AXBS_MGPCR0.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR0_AULB.
#define BF_AXBS_MGPCR0_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR0_AULB), uint32_t) & BM_AXBS_MGPCR0_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR0_AULB(v) (HW_AXBS_MGPCR0_WR((HW_AXBS_MGPCR0_RD() & ~BM_AXBS_MGPCR0_AULB) | BF_AXBS_MGPCR0_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR1 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR1 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr1
{
uint32_t U;
struct _hw_axbs_mgpcr1_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr1_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR1 register
*/
//@{
#define HW_AXBS_MGPCR1_ADDR (REGS_AXBS_BASE + 0x900U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR1 (*(__IO hw_axbs_mgpcr1_t *) HW_AXBS_MGPCR1_ADDR)
#define HW_AXBS_MGPCR1_RD() (HW_AXBS_MGPCR1.U)
#define HW_AXBS_MGPCR1_WR(v) (HW_AXBS_MGPCR1.U = (v))
#define HW_AXBS_MGPCR1_SET(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() | (v)))
#define HW_AXBS_MGPCR1_CLR(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() & ~(v)))
#define HW_AXBS_MGPCR1_TOG(v) (HW_AXBS_MGPCR1_WR(HW_AXBS_MGPCR1_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR1 bitfields
*/
/*!
* @name Register AXBS_MGPCR1, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR1_AULB (0U) //!< Bit position for AXBS_MGPCR1_AULB.
#define BM_AXBS_MGPCR1_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR1_AULB.
#define BS_AXBS_MGPCR1_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR1_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR1_AULB field.
#define BR_AXBS_MGPCR1_AULB (HW_AXBS_MGPCR1.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR1_AULB.
#define BF_AXBS_MGPCR1_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR1_AULB), uint32_t) & BM_AXBS_MGPCR1_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR1_AULB(v) (HW_AXBS_MGPCR1_WR((HW_AXBS_MGPCR1_RD() & ~BM_AXBS_MGPCR1_AULB) | BF_AXBS_MGPCR1_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR2 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR2 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr2
{
uint32_t U;
struct _hw_axbs_mgpcr2_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr2_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR2 register
*/
//@{
#define HW_AXBS_MGPCR2_ADDR (REGS_AXBS_BASE + 0xA00U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR2 (*(__IO hw_axbs_mgpcr2_t *) HW_AXBS_MGPCR2_ADDR)
#define HW_AXBS_MGPCR2_RD() (HW_AXBS_MGPCR2.U)
#define HW_AXBS_MGPCR2_WR(v) (HW_AXBS_MGPCR2.U = (v))
#define HW_AXBS_MGPCR2_SET(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() | (v)))
#define HW_AXBS_MGPCR2_CLR(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() & ~(v)))
#define HW_AXBS_MGPCR2_TOG(v) (HW_AXBS_MGPCR2_WR(HW_AXBS_MGPCR2_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR2 bitfields
*/
/*!
* @name Register AXBS_MGPCR2, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR2_AULB (0U) //!< Bit position for AXBS_MGPCR2_AULB.
#define BM_AXBS_MGPCR2_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR2_AULB.
#define BS_AXBS_MGPCR2_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR2_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR2_AULB field.
#define BR_AXBS_MGPCR2_AULB (HW_AXBS_MGPCR2.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR2_AULB.
#define BF_AXBS_MGPCR2_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR2_AULB), uint32_t) & BM_AXBS_MGPCR2_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR2_AULB(v) (HW_AXBS_MGPCR2_WR((HW_AXBS_MGPCR2_RD() & ~BM_AXBS_MGPCR2_AULB) | BF_AXBS_MGPCR2_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR3 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR3 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr3
{
uint32_t U;
struct _hw_axbs_mgpcr3_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr3_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR3 register
*/
//@{
#define HW_AXBS_MGPCR3_ADDR (REGS_AXBS_BASE + 0xB00U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR3 (*(__IO hw_axbs_mgpcr3_t *) HW_AXBS_MGPCR3_ADDR)
#define HW_AXBS_MGPCR3_RD() (HW_AXBS_MGPCR3.U)
#define HW_AXBS_MGPCR3_WR(v) (HW_AXBS_MGPCR3.U = (v))
#define HW_AXBS_MGPCR3_SET(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() | (v)))
#define HW_AXBS_MGPCR3_CLR(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() & ~(v)))
#define HW_AXBS_MGPCR3_TOG(v) (HW_AXBS_MGPCR3_WR(HW_AXBS_MGPCR3_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR3 bitfields
*/
/*!
* @name Register AXBS_MGPCR3, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR3_AULB (0U) //!< Bit position for AXBS_MGPCR3_AULB.
#define BM_AXBS_MGPCR3_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR3_AULB.
#define BS_AXBS_MGPCR3_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR3_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR3_AULB field.
#define BR_AXBS_MGPCR3_AULB (HW_AXBS_MGPCR3.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR3_AULB.
#define BF_AXBS_MGPCR3_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR3_AULB), uint32_t) & BM_AXBS_MGPCR3_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR3_AULB(v) (HW_AXBS_MGPCR3_WR((HW_AXBS_MGPCR3_RD() & ~BM_AXBS_MGPCR3_AULB) | BF_AXBS_MGPCR3_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR4 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR4 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr4
{
uint32_t U;
struct _hw_axbs_mgpcr4_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr4_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR4 register
*/
//@{
#define HW_AXBS_MGPCR4_ADDR (REGS_AXBS_BASE + 0xC00U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR4 (*(__IO hw_axbs_mgpcr4_t *) HW_AXBS_MGPCR4_ADDR)
#define HW_AXBS_MGPCR4_RD() (HW_AXBS_MGPCR4.U)
#define HW_AXBS_MGPCR4_WR(v) (HW_AXBS_MGPCR4.U = (v))
#define HW_AXBS_MGPCR4_SET(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() | (v)))
#define HW_AXBS_MGPCR4_CLR(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() & ~(v)))
#define HW_AXBS_MGPCR4_TOG(v) (HW_AXBS_MGPCR4_WR(HW_AXBS_MGPCR4_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR4 bitfields
*/
/*!
* @name Register AXBS_MGPCR4, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR4_AULB (0U) //!< Bit position for AXBS_MGPCR4_AULB.
#define BM_AXBS_MGPCR4_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR4_AULB.
#define BS_AXBS_MGPCR4_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR4_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR4_AULB field.
#define BR_AXBS_MGPCR4_AULB (HW_AXBS_MGPCR4.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR4_AULB.
#define BF_AXBS_MGPCR4_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR4_AULB), uint32_t) & BM_AXBS_MGPCR4_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR4_AULB(v) (HW_AXBS_MGPCR4_WR((HW_AXBS_MGPCR4_RD() & ~BM_AXBS_MGPCR4_AULB) | BF_AXBS_MGPCR4_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_AXBS_MGPCR5 - Master General Purpose Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_AXBS_MGPCR5 - Master General Purpose Control Register (RW)
*
* Reset value: 0x00000000U
*
* The MGPCR controls only whether the master's undefined length burst accesses
* are allowed to complete uninterrupted or whether they can be broken by
* requests from higher priority masters. The MGPCR can be accessed only in Supervisor
* mode with 32-bit accesses.
*/
typedef union _hw_axbs_mgpcr5
{
uint32_t U;
struct _hw_axbs_mgpcr5_bitfields
{
uint32_t AULB : 3; //!< [2:0] Arbitrates On Undefined Length Bursts
uint32_t RESERVED0 : 29; //!< [31:3]
} B;
} hw_axbs_mgpcr5_t;
#endif
/*!
* @name Constants and macros for entire AXBS_MGPCR5 register
*/
//@{
#define HW_AXBS_MGPCR5_ADDR (REGS_AXBS_BASE + 0xD00U)
#ifndef __LANGUAGE_ASM__
#define HW_AXBS_MGPCR5 (*(__IO hw_axbs_mgpcr5_t *) HW_AXBS_MGPCR5_ADDR)
#define HW_AXBS_MGPCR5_RD() (HW_AXBS_MGPCR5.U)
#define HW_AXBS_MGPCR5_WR(v) (HW_AXBS_MGPCR5.U = (v))
#define HW_AXBS_MGPCR5_SET(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() | (v)))
#define HW_AXBS_MGPCR5_CLR(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() & ~(v)))
#define HW_AXBS_MGPCR5_TOG(v) (HW_AXBS_MGPCR5_WR(HW_AXBS_MGPCR5_RD() ^ (v)))
#endif
//@}
/*
* Constants & macros for individual AXBS_MGPCR5 bitfields
*/
/*!
* @name Register AXBS_MGPCR5, field AULB[2:0] (RW)
*
* Determines whether, and when, the crossbar switch arbitrates away the slave
* port the master owns when the master is performing undefined length burst
* accesses.
*
* Values:
* - 000 - No arbitration is allowed during an undefined length burst
* - 001 - Arbitration is allowed at any time during an undefined length burst
* - 010 - Arbitration is allowed after four beats of an undefined length burst
* - 011 - Arbitration is allowed after eight beats of an undefined length burst
* - 100 - Arbitration is allowed after 16 beats of an undefined length burst
* - 101 - Reserved
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_AXBS_MGPCR5_AULB (0U) //!< Bit position for AXBS_MGPCR5_AULB.
#define BM_AXBS_MGPCR5_AULB (0x00000007U) //!< Bit mask for AXBS_MGPCR5_AULB.
#define BS_AXBS_MGPCR5_AULB (3U) //!< Bit field size in bits for AXBS_MGPCR5_AULB.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the AXBS_MGPCR5_AULB field.
#define BR_AXBS_MGPCR5_AULB (HW_AXBS_MGPCR5.B.AULB)
#endif
//! @brief Format value for bitfield AXBS_MGPCR5_AULB.
#define BF_AXBS_MGPCR5_AULB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AXBS_MGPCR5_AULB), uint32_t) & BM_AXBS_MGPCR5_AULB)
#ifndef __LANGUAGE_ASM__
//! @brief Set the AULB field to a new value.
#define BW_AXBS_MGPCR5_AULB(v) (HW_AXBS_MGPCR5_WR((HW_AXBS_MGPCR5_RD() & ~BM_AXBS_MGPCR5_AULB) | BF_AXBS_MGPCR5_AULB(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_axbs_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All AXBS module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_axbs
{
struct {
__IO hw_axbs_prsn_t PRSn; //!< [0x0] Priority Registers Slave
uint8_t _reserved0[12];
__IO hw_axbs_crsn_t CRSn; //!< [0x10] Control Register
uint8_t _reserved1[236];
} SLAVE[5];
uint8_t _reserved0[768];
__IO hw_axbs_mgpcr0_t MGPCR0; //!< [0x800] Master General Purpose Control Register
uint8_t _reserved1[252];
__IO hw_axbs_mgpcr1_t MGPCR1; //!< [0x900] Master General Purpose Control Register
uint8_t _reserved2[252];
__IO hw_axbs_mgpcr2_t MGPCR2; //!< [0xA00] Master General Purpose Control Register
uint8_t _reserved3[252];
__IO hw_axbs_mgpcr3_t MGPCR3; //!< [0xB00] Master General Purpose Control Register
uint8_t _reserved4[252];
__IO hw_axbs_mgpcr4_t MGPCR4; //!< [0xC00] Master General Purpose Control Register
uint8_t _reserved5[252];
__IO hw_axbs_mgpcr5_t MGPCR5; //!< [0xD00] Master General Purpose Control Register
} hw_axbs_t;
#pragma pack()
//! @brief Macro to access all AXBS registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_AXBS</code>.
#define HW_AXBS (*(hw_axbs_t *) REGS_AXBS_BASE)
#endif
#endif // __HW_AXBS_REGISTERS_H__
// v22/130726/0.9
// EOF