rt-thread-official/bsp/x1000/drivers/slcd/drv_slcd_ili9488.c

177 lines
4.7 KiB
C
Raw Normal View History

2017-11-11 13:51:56 +08:00
/*
* File : drv_slcdc_ili9488.c
* COPYRIGHT (C) 2008 - 2016, RT-Thread Development Team
*
* Change Logs:
* Date Author Notes
* 2017<EFBFBD><EFBFBD>5<EFBFBD><EFBFBD>6<EFBFBD><EFBFBD> Urey the first version
*/
#include <rtthread.h>
#include <cache.h>
#include "board.h"
#include "drv_slcdc.h"
#include <drv_gpio.h>
#ifdef RT_USING_ILI9488
#define LCD_WIDTH 480
#define LCD_HEIGHT 320
const rt_uint32_t _lcm_cmd_table[]=
{
0x2C2C2C2C,
};
const struct slcd_data_table _lcm_data_table[] =
{
/* LCD init code */
{SMART_CONFIG_CMD, 0xE0}, //P-Gamma
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x07},
{SMART_CONFIG_DATA,0x0f},
{SMART_CONFIG_DATA,0x07},
{SMART_CONFIG_DATA,0x15},
{SMART_CONFIG_DATA,0x09},
{SMART_CONFIG_DATA,0x3c},
{SMART_CONFIG_DATA,0x99},
{SMART_CONFIG_DATA,0x4b},
{SMART_CONFIG_DATA,0x09},
{SMART_CONFIG_DATA,0x10},
{SMART_CONFIG_DATA,0x0d},
{SMART_CONFIG_DATA,0x1c},
{SMART_CONFIG_DATA,0x1e},
{SMART_CONFIG_DATA,0x0f},
{SMART_CONFIG_CMD, 0xE1}, //N-Gamma
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x20},
{SMART_CONFIG_DATA,0x23},
{SMART_CONFIG_DATA,0x02},
{SMART_CONFIG_DATA,0x0f},
{SMART_CONFIG_DATA,0x06},
{SMART_CONFIG_DATA,0x34},
{SMART_CONFIG_DATA,0x45},
{SMART_CONFIG_DATA,0x43},
{SMART_CONFIG_DATA,0x04},
{SMART_CONFIG_DATA,0x0a},
{SMART_CONFIG_DATA,0x08},
{SMART_CONFIG_DATA,0x30},
{SMART_CONFIG_DATA,0x37},
{SMART_CONFIG_DATA,0x0f},
{SMART_CONFIG_CMD, 0xC0}, //Power Control 1
{SMART_CONFIG_DATA, 0x17}, //Vreg1out
{SMART_CONFIG_DATA, 0x15}, //Verg2out
{SMART_CONFIG_CMD, 0xC1}, //Power Control 2
{SMART_CONFIG_DATA, 0x41}, //VGH,VGL
{SMART_CONFIG_CMD, 0xC5}, //Power Control 3
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x12},
{SMART_CONFIG_DATA,0x80},
{SMART_CONFIG_CMD,0x36}, //MemoryAccess
{SMART_CONFIG_DATA,0xE8}, //[<5B><><EFBFBD><EFBFBD>]0x48 0x88 [<5B><><EFBFBD><EFBFBD>]0x28 0xE8 0x68 //0x08
{SMART_CONFIG_CMD,0x3A}, //InterfacePixelFormat
{SMART_CONFIG_DATA,0x55}, //07 24bpp ,06 18bpp,05 16bpp
{SMART_CONFIG_CMD,0xB0}, //Interface Mode Control
{SMART_CONFIG_DATA,0x08},
{SMART_CONFIG_CMD,0xB1}, //Frame rate 60HZ
{SMART_CONFIG_DATA,0xA0},
{SMART_CONFIG_DATA,0x11},
{SMART_CONFIG_CMD,0xB4},
{SMART_CONFIG_DATA,0x02},
{SMART_CONFIG_CMD,0xB6}, //RGB/MCU Interface Control
{SMART_CONFIG_DATA,0x02},
{SMART_CONFIG_DATA,0x02},
{SMART_CONFIG_CMD,0xBE},
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x04},
{SMART_CONFIG_CMD,0xE9},
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_CMD,0xF7},
{SMART_CONFIG_DATA,0xA9},
{SMART_CONFIG_DATA,0x51},
{SMART_CONFIG_DATA,0x2C},
{SMART_CONFIG_DATA,0x82},
{SMART_CONFIG_CMD,0x11},
{SMART_CONFIG_UDELAY, 120000},
{SMART_CONFIG_CMD,0x29},
//Set Window
{SMART_CONFIG_CMD,0x2A}, //Set X
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,(LCD_WIDTH - 1) >> 8},
{SMART_CONFIG_DATA,(LCD_WIDTH - 1) & 0xFF},
{SMART_CONFIG_CMD,0x2B}, //Set Y
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,0x00},
{SMART_CONFIG_DATA,(LCD_HEIGHT - 1) >> 8},
{SMART_CONFIG_DATA,(LCD_HEIGHT - 1) & 0xFF},
// {SMART_CONFIG_CMD, 0x2C}
{SMART_CONFIG_CMD,0x35},
{SMART_CONFIG_DATA,0x00}
};
struct slcd_configure _lcm_config =
{
.rsply_cmd_high = 0,
.csply_active_high = 0,
.newcfg_fmt_conv = 1,
.width = LCD_WIDTH,
.height = LCD_HEIGHT,
.fmt = RTGRAPHIC_PIXEL_FORMAT_RGB565,
.bpp = 16,
.bus_width = 8,
.reg_width = 8,
.refresh = 60,
.data_table = &_lcm_data_table[0],
.data_table_num = sizeof(_lcm_data_table)/sizeof(_lcm_data_table[0]),
.cmd_table = &_lcm_cmd_table[0],
.cmd_table_num = sizeof(_lcm_cmd_table)/sizeof(_lcm_cmd_table[0])
};
int rt_hw_ili9488_init(void)
{
rt_thread_delay(rt_tick_from_millisecond(500));
/* Power ON */
// gpio_direction_output(GPIO_PORT_B,GPIO_Pin_16,1); //RD = 1
// gpio_direction_output(GPIO_PORT_B,GPIO_Pin_18,1); //CS = 1
//
// gpio_set_value(LCD_RST_PORT, LCD_RST_PIN, 0);
// rt_thread_delay(rt_tick_from_millisecond(20));
// gpio_set_value(LCD_RST_PORT, LCD_RST_PIN, 1);
// rt_thread_delay(rt_tick_from_millisecond(500));
// gpio_set_value(GPIO_PORT_B, GPIO_Pin_18, 0); //CS = 0
/* enable backlight */
gpio_direction_output(LCD_BL_PORT, LCD_BL_PIN,1);
/* init lcd & register lcd device */
rt_hw_slcd_init(&_lcm_config);
return 0;
}
INIT_DEVICE_EXPORT(rt_hw_ili9488_init);
#endif