rt-thread-official/bsp/ck802/drivers/pinmux.c

159 lines
4.4 KiB
C
Raw Permalink Normal View History

2018-06-05 14:36:29 +08:00
/*
* Copyright (C) 2017 C-SKY Microsystems Co., Ltd. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/******************************************************************************
* @file pinmux.c
* @brief source file for the pinmux
* @version V1.0
* @date 02. June 2017
******************************************************************************/
#include <stdint.h>
#include "pinmux.h"
#include "pin_name.h"
#define readl(addr) \
({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
/*******************************************************************************
* function: phobos_ioreuse_inital
*
* description:
* initial phobos_pinmux
*******************************************************************************/
void phobos_ioreuse_initial(void)
{
unsigned int value;
/* gpio data source select */
value = readl(PHOBOS_GIPO0_PORTCTL_REG);
value |= GPIO0_REUSE_EN;
writel(value, PHOBOS_GIPO0_PORTCTL_REG);
value = readl(PHOBOS_GIPO1_PORTCTL_REG);
value |= GPIO1_REUSE_EN;
writel(value, PHOBOS_GIPO1_PORTCTL_REG);
/* reuse function select */
value = readl(PHOBOS_IOMUX0L_REG);
value |= IOMUX0L_FUNCTION_SEL;
writel(value, PHOBOS_IOMUX0L_REG);
value = readl(PHOBOS_IOMUX0H_REG);
value |= IOMUX1L_FUNCTION_SEL;
writel(value, PHOBOS_IOMUX0H_REG);
value = readl(PHOBOS_IOMUX1L_REG);
value |= IOMUX1L_FUNCTION_SEL;
writel(value, PHOBOS_IOMUX1L_REG);
}
void phobos_pwm_ioreuse(void)
{
unsigned int value;
/* gpio data source select */
value = readl(PHOBOS_GIPO0_PORTCTL_REG);
value |= PWM_GPIO0_REUSE_EN;
writel(value, PHOBOS_GIPO0_PORTCTL_REG);
/* reuse function select */
value = readl(PHOBOS_IOMUX0L_REG);
value |= PWM_IOMUX0L_FUNCTION_SEL;
writel(value, PHOBOS_IOMUX0L_REG);
}
int32_t pin_mux(pin_name_t pin, uint16_t function)
{
unsigned int val = 0;
unsigned int reg_val = 0;
uint8_t offset;
if (function > 3)
{
if (pin < PB0_ADC0_SDA0_PWM5_XX)
{
offset = pin;
/* gpio data source select */
val = readl(PHOBOS_GIPO0_PORTCTL_REG);
val &= ~(1 << offset);
writel(val, PHOBOS_GIPO0_PORTCTL_REG);
return 0;
}
else if (pin >= PB0_ADC0_SDA0_PWM5_XX)
{
offset = pin - 32;
/* gpio data source select */
val = readl(PHOBOS_GIPO1_PORTCTL_REG);
val &= ~(1 << offset);
writel(val, PHOBOS_GIPO1_PORTCTL_REG);
return 0;
}
else
{
return -1;
}
}
if (pin >= PB0_ADC0_SDA0_PWM5_XX)
{
offset = pin - 32;
/* gpio data source select */
val = readl(PHOBOS_GIPO1_PORTCTL_REG);
val |= (1 << offset);
writel(val, PHOBOS_GIPO1_PORTCTL_REG);
reg_val = (0x3 << (offset * 2));
/* reuse function select */
val = readl(PHOBOS_IOMUX1L_REG);
val &= ~(reg_val);
val |= (function << (2 * offset));
writel(val, PHOBOS_IOMUX1L_REG);
return 0;
}
offset = pin;
/* gpio data source select */
val = readl(PHOBOS_GIPO0_PORTCTL_REG);
val |= (1 << offset);
writel(val, PHOBOS_GIPO0_PORTCTL_REG);
if (pin >= PA16_SPI1CLK_PWMTRIG1_XX_XX)
{
offset = pin - 16;
reg_val = (0x3 << (offset * 2));
/* reuse function select */
val = readl(PHOBOS_IOMUX0H_REG);
val &= ~(reg_val);
val |= (function << (2 * offset));
writel(val, PHOBOS_IOMUX0H_REG);
return 0;
}
reg_val = (0x3 << (offset * 2));
/* reuse function select */
val = readl(PHOBOS_IOMUX0L_REG);
val &= ~(reg_val);
val |= (function << (2 * offset));
writel(val, PHOBOS_IOMUX0L_REG);
return 0;
}