rt-thread-official/bsp/cvitek/drivers/SConscript

from building import *

cwd     = GetCurrentDir()
src     = Split('''
    drv_uart.c
    drv_por.c
    drv_gpio.c
''')
CPPDEFINES = []

CPPPATH = [cwd]

CHIP_TYPE = 'cv180x'
if GetDepend('BOARD_TYPE_MILKV_DUO256M') or GetDepend('BOARD_TYPE_MILKV_DUO256M_SPINOR') or GetDepend('BOARD_TYPE_MILKV_DUO256M_SPINAND'):
    CHIP_TYPE = 'cv181x'
elif GetDepend('BOARD_TYPE_MILKV_DUO') or GetDepend('BOARD_TYPE_MILKV_DUO_SPINOR') or GetDepend('BOARD_TYPE_MILKV_DUO_SPINAND'):
    CHIP_TYPE = 'cv180x'

CPPPATH += [cwd + r'/libraries']
CPPPATH += [cwd + r'/libraries/' + CHIP_TYPE]

if GetDepend('BSP_USING_I2C'):
    src += ['drv_hw_i2c.c']

if GetDepend('BSP_USING_ADC'):
    src += ['drv_adc.c']

if GetDepend('BSP_USING_WDT'):
    src += ['drv_wdt.c']

if GetDepend(['BSP_USING_SPI']):
    src += ['drv_spi.c']

if GetDepend('BSP_USING_PWM'):
    src += ['drv_pwm.c']
    CPPPATH += [cwd + r'/libraries/cv180x/pwm']

if GetDepend('BSP_USING_SDH'):
    src += ['drv_sdhci.c', 'port/mnt.c']
    CPPPATH += [cwd + r'/libraries/sdif']


if GetDepend('BSP_USING_ETH'):
    src += Split('''
        drv_eth.c
        libraries/eth/dw_eth_mac.c
        libraries/eth/cvi_eth_phy.c
        libraries/eth/eth_phy_cvitek.c
    ''')
    CPPPATH += [cwd + r'/libraries/eth']

CPPDEFINES += ['-DCONFIG_64BIT']

if GetDepend('BSP_USING_RTC'):
    src += ['drv_rtc.c']

group = DefineGroup('drivers', src, depend = [''], CPPDEFINES = CPPDEFINES, CPPPATH = CPPPATH)

Return('group')