libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/nuvoton/libraries/nu_packages/Kconfig

238 lines
6.2 KiB
Plaintext
Raw Permalink Normal View History

Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
menu "Nuvoton Packages Config"
config NU_PKG_USING_UTILS
bool
default y
config NU_PKG_USING_DEMO
bool "Enable demos"
default y
config NU_PKG_USING_BMX055
bool "BMX055 9-axis sensor."
select RT_USING_I2C
select RT_USING_SENSOR
[sensor-v2]将当前sensor框架revert回v1版本并独立为v2 (#7698)
2023-06-19 10:36:53 +08:00
select RT_USING_SENSOR_V2
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
default n
config NU_PKG_USING_MAX31875
bool "MAX31875 Temperature sensor."
select RT_USING_I2C
select RT_USING_SENSOR
[sensor-v2]将当前sensor框架revert回v1版本并独立为v2 (#7698)
2023-06-19 10:36:53 +08:00
select RT_USING_SENSOR_V2
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
default n
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) * [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-12 19:36:11 +08:00
config NU_PKG_USING_NCT7717U
bool "NCT7717U Temperature sensor."
select RT_USING_I2C
select RT_USING_SENSOR
[sensor-v2]将当前sensor框架revert回v1版本并独立为v2 (#7698)
2023-06-19 10:36:53 +08:00
select RT_USING_SENSOR_V2
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416) * [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-12 19:36:11 +08:00
default n
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
config NU_PKG_USING_NAU88L25
bool "NAU88L25 Audio Codec."
select BSP_USING_I2C
default n
Update nuvoton RTT porting. 1. Fix porting driver. 2. Add NAU8822 audio codec driver. 3. Add NUC980 I2S porting driver.
2020-12-25 18:39:12 +08:00
config NU_PKG_USING_NAU8822
bool "NAU8822 Audio Codec."
select BSP_USING_I2C
default n
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
[nuvoton] Update porting drivers and configurations.
2021-11-10 16:20:21 +08:00
config NU_PKG_USING_DA9062
bool "DA9062 PMIC."
select BSP_USING_I2C
default n
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
config NU_PKG_USING_ILI9341
bool "ILI9341 LCD Panel"
select BSP_USING_GPIO
default n
[Nuvoton] Update drivers (#5501) * Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0. * [Nuvoton] Update drivers. 1. Fix open-control order issue in CAN driver. 2. [N9H30] Improve N9H30 I2C busy-wait implementation. 3. [N9H30] Support 1024x600x32b LCD panel. 4. Move nu_packages menu into sub-menu of board. * Update menu-option. 1. Set BOARD_USING_LCM is on by default. 2. Fix default value setting in choice-option. * Fix control function in I2C driver. * Add sdk_dist.py and ADC touching calibration function. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
if NU_PKG_USING_ILI9341
choice
prompt "Select ili9341 interface"
config NU_PKG_USING_ILI9341_SPI
select BSP_USING_SPI
bool "ILI9341_SPI"
help
Choose this option if you the ili9341 device is with SPI interface.
config NU_PKG_USING_ILI9341_EBI
select BSP_USING_EBI
bool "ILI9341_EBI"
help
Choose this option if you the ili9341 device is with EBI interface.
endchoice
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
if NU_PKG_USING_ILI9341_SPI
config NU_PKG_USING_ILI9341_SPI_CLK_FREQ
int "Set SPI Clock frequency"
default 48000000
endif
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
config NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
bool "Create an offscreen framebuffer."
default n
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
if NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
config NU_PKG_ILI9341_LINE_BUFFER_NUMBER
int "Allocate Line buffer number."
range 1 240
default 240
endif
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
config NU_PKG_ILI9341_HORIZONTAL
[Nuvoton] Update drivers (#5501) * Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0. * [Nuvoton] Update drivers. 1. Fix open-control order issue in CAN driver. 2. [N9H30] Improve N9H30 I2C busy-wait implementation. 3. [N9H30] Support 1024x600x32b LCD panel. 4. Move nu_packages menu into sub-menu of board. * Update menu-option. 1. Set BOARD_USING_LCM is on by default. 2. Fix default value setting in choice-option. * Fix control function in I2C driver. * Add sdk_dist.py and ADC touching calibration function. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
bool
default y
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
[Nuvoton] Update drivers (#5501) * Update drivers. 1. Improve LVGL avg FPS. 2. Sync configuration to 4.1.0. * [Nuvoton] Update drivers. 1. Fix open-control order issue in CAN driver. 2. [N9H30] Improve N9H30 I2C busy-wait implementation. 3. [N9H30] Support 1024x600x32b LCD panel. 4. Move nu_packages menu into sub-menu of board. * Update menu-option. 1. Set BOARD_USING_LCM is on by default. 2. Fix default value setting in choice-option. * Fix control function in I2C driver. * Add sdk_dist.py and ADC touching calibration function. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
config BSP_LCD_BPP
int
default 16 if NU_PKG_USING_ILI9341
config BSP_LCD_WIDTH
int
default 320 if NU_PKG_ILI9341_HORIZONTAL
config BSP_LCD_HEIGHT
int
default 240 if NU_PKG_ILI9341_HORIZONTAL
Update nuvoton porting. 1. Make up sources and bugfix. 2. Add nu_gpio_pin_get. 3. Add PM operator in USB host driver. 4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:34:01 +08:00
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
endif
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
config NU_PKG_USING_SSD1963
bool "SSD1963 LCD Panel"
select BSP_USING_GPIO
default n
if NU_PKG_USING_SSD1963
choice
prompt "Select SSD1963 interface"
config NU_PKG_USING_SSD1963_EBI
select BSP_USING_EBI
bool "SSD1963_EBI"
help
Choose this option if you the SSD1963 device is with EBI interface.
endchoice
config NU_PKG_SSD1963_WITH_OFFSCREEN_FRAMEBUFFER
bool "Create an offscreen framebuffer."
default n
if NU_PKG_SSD1963_WITH_OFFSCREEN_FRAMEBUFFER
config NU_PKG_SSD1963_LINE_BUFFER_NUMBER
int "Allocate Line buffer number."
range 16 272
default 272
endif
config BSP_LCD_BPP
int
default 16 if NU_PKG_USING_SSD1963
config BSP_LCD_WIDTH
int
default 480 if NU_PKG_USING_SSD1963
config BSP_LCD_HEIGHT
int
default 272 if NU_PKG_USING_SSD1963
endif
[bsp/nuvoton] Update. (#6022) 1. Sync 4.1.1+. 2. Add SDIO drivers for M480/M2354 platforms. 3. Update LVGL porting. 4. Add N9H30 FMI NAND driver. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-06-03 10:01:15 +08:00
config NU_PKG_USING_FSA506
bool "FSA506 LCD Panel"
select BSP_USING_GPIO
default n
if NU_PKG_USING_FSA506
choice
prompt "Select FSA506 interface"
config NU_PKG_USING_FSA506_EBI
select BSP_USING_EBI
bool "FSA506_EBI"
help
Choose this option if you the FSA506 device is with EBI interface.
endchoice
config NU_PKG_FSA506_WITH_OFFSCREEN_FRAMEBUFFER
bool "Create an offscreen framebuffer."
default n
if NU_PKG_FSA506_WITH_OFFSCREEN_FRAMEBUFFER
config NU_PKG_FSA506_LINE_BUFFER_NUMBER
int "Allocate Line buffer number."
range 16 272
default 272
endif
config BSP_LCD_BPP
int
default 16 if NU_PKG_USING_FSA506
config BSP_LCD_WIDTH
int
default 480 if NU_PKG_USING_FSA506
config BSP_LCD_HEIGHT
int
default 272 if NU_PKG_USING_FSA506
endif
[nuvoton] Update drivers and project setting. (#5726)
2022-03-29 07:10:35 +08:00
config NU_PKG_USING_TPC
bool "Support Touch Panel Controller over I2C"
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
select RT_USING_TOUCH
[nuvoton] Update drivers and project setting. (#5726)
2022-03-29 07:10:35 +08:00
select RT_TOUCH_PIN_IRQ
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
select RT_USING_I2C
[nuvoton] Update drivers and project setting. (#5726)
2022-03-29 07:10:35 +08:00
if NU_PKG_USING_TPC
choice
prompt "Select TPC drivers"
config NU_PKG_USING_TPC_ILI
bool "ILI Series TPC"
config NU_PKG_USING_TPC_GT911
bool "GT911 TPC"
[bsp/nuvoton] Update. (#6022) 1. Sync 4.1.1+. 2. Add SDIO drivers for M480/M2354 platforms. 3. Update LVGL porting. 4. Add N9H30 FMI NAND driver. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-06-03 10:01:15 +08:00
config NU_PKG_USING_TPC_FT5446
bool "FT5446 TPC"
config NU_PKG_USING_TPC_ST1663I
bool "ST1663I TPC"
[nuvoton] Update drivers and project setting. (#5726)
2022-03-29 07:10:35 +08:00
endchoice
[bsp/nuvoton] Update. (#6022) 1. Sync 4.1.1+. 2. Add SDIO drivers for M480/M2354 platforms. 3. Update LVGL porting. 4. Add N9H30 FMI NAND driver. Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-06-03 10:01:15 +08:00
config NU_PKG_TPC_REVERSE_XY
bool "Reverse X-Y coordinate"
default n
[nuvoton] Update drivers and project setting. (#5726)
2022-03-29 07:10:35 +08:00
endif
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
config NU_PKG_USING_ADC_TOUCH
bool "ADC touch function"
default n
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
if NU_PKG_USING_ADC_TOUCH
config NU_PKG_USING_ADC_TOUCH_SW
bool "Using SW ADC touch"
select RT_USING_ADC
format Kconfig and sconscript
2023-01-09 10:14:23 +08:00
default n
Nuvoton drivers updating and more LVGL supporting. (#5647)
2022-03-12 07:00:53 +08:00
endif
Sync Nuvoton porting. 1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND. 2. Correct enter-quad-mode routine in board_dec.c. 3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
config NU_PKG_USING_SPINAND
bool "SPI NAND flash."
select BSP_USING_QSPI
select RT_USING_MTD_NAND
default n
Support Nuvoton NuMaker-IOT-M487 and NuMaker-PFM-M487 boards.
2020-06-17 16:30:11 +08:00
endmenu