rt-thread-official/bsp/maxim/libraries/MAX32660PeriphDriver/Include/flc.h

201 lines
7.0 KiB
C
Raw Permalink Normal View History

2021-02-11 04:45:50 +08:00
/**
* @file
* @brief Flash Controler driver.
* @details This driver can be used to operate on the embedded flash memory.
*/
/* ****************************************************************************
* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Except as contained in this notice, the name of Maxim Integrated
* Products, Inc. shall not be used except as stated in the Maxim Integrated
* Products, Inc. Branding Policy.
*
* The mere transfer of this software does not imply any licenses
* of trade secrets, proprietary technology, copyrights, patents,
* trademarks, maskwork rights, or any other form of intellectual
* property whatsoever. Maxim Integrated Products, Inc. retains all
* ownership rights.
*
* $Date: 2019-06-05 16:53:29 -0500 (Wed, 05 Jun 2019) $
* $Revision: 43696 $
*
*************************************************************************** */
#ifndef _FLC_H_
#define _FLC_H_
/* **** Includes **** */
#include "flc_regs.h"
#include "mxc_sys.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup flc Flash Controller
* @ingroup periphlibs
* @{
*/
/***** Definitions *****/
/// Bit mask that can be used to find the starting address of a page in flash
#define MXC_FLASH_PAGE_MASK ~(MXC_FLASH_PAGE_SIZE - 1)
/// Calculate the address of a page in flash from the page number
#define MXC_FLASH_PAGE_ADDR(page) (MXC_FLASH_MEM_BASE + ((unsigned long)page * MXC_FLASH_PAGE_SIZE))
/***** Function Prototypes *****/
/**
* @brief Initializes the flash controller for erase/write operations
* @param sys_cfg Reserved for future use. Use NULL as this parameter's value.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if unsuccessful.
*/
int FLC_Init(const sys_cfg_flc_t *sys_cfg);
/**
* @brief Checks if Flash controller is busy.
* @details Reading or executing from flash is not possible if flash is busy
* with an erase or write operation.
* @return If non-zero, flash operation is in progress
*/
int FLC_Busy(void);
/**
* @brief Erases the entire flash array.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if unsuccessful.
*/
int FLC_MassErase(void);
/**
* @brief Erases the page of flash at the specified address.
* @param address Any address within the page to erase.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if unsuccessful.
*/
int FLC_PageErase(uint32_t address);
/**
* @brief Page erase from start to end address.
* @note All data within the selected pages will be erased.
* @param start Any address within the first page to erase.
* @param end Any address within the last page to erase.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if unsuccessful.
*/
int FLC_Erase(uint32_t start, uint32_t end);
/**
* @brief Erase from start to end address. Restoring any flash page contents outside the given range.
* @param start Starting address to erase, inclusive.
* @param end Ending address to erase, exclusive.
* @param buffer Data buffer to restore data in beginning and ending pages.
* @param length Length of given buffer.
*
* @note Buffer should be appropriate size to store all of the data remaining in the
* first and last pages. length should be greater than or equal to
* (start % MXC_FLASH_PAGE_SIZE) and ((MXC_FLASH_PAGE_SIZE - (end % MXC_FLASH_PAGE_SIZE)) % MXC_FLASH_PAGE_SIZE).
*
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if unsuccessful.
*/
int FLC_BufferErase(uint32_t start, uint32_t end, uint8_t *buffer, unsigned length);
/**
* @brief Writes the specified 32-bit value to flash.
* @param address 32-bit aligned address in flash to write.
* @param data value to be written to flash.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_Write32(uint32_t address, uint32_t data);
/**
* @brief Writes the specified 128-bits of data to flash.
* @param address 128-bit aligned address in flash to write.
* @param data pointer to data to be written to flash.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_Write128(uint32_t address, uint32_t *data);
/**
* @brief Writes data to flash.
* @param address Address in flash to start writing from.
* @param length Number of bytes to be written.
* @param buffer Pointer to data to be written to flash.
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_Write(uint32_t address, uint32_t length, uint8_t *buffer);
/**
* @brief Enable flash interrupts
* @param mask Interrupts to enable
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_EnableInt(uint32_t mask);
/**
* @brief Disable flash interrupts
* @param mask Interrupts to disable
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_DisableInt(uint32_t mask);
/**
* @brief Retrieve flash interrupt flags
* @return Mask of active flags.
*/
int FLC_GetFlags(void);
/**
* @brief Clear flash interrupt flags
* @note Provide the bit position to clear, even if the flag is write-0-to-clear
* @param mask Mask of flags to clear
* @return #E_NO_ERROR if successful, @ref MXC_Error_Codes "error" if
* unsuccessful.
*/
int FLC_ClearFlags(uint32_t mask);
/**
* @brief Unlock info block
*
* @return #E_NO_ERROR If function is successful.
*/
int FLC_UnlockInfoBlock(void);
/**
* @brief Lock info block
*
* @return #E_NO_ERROR If function is successful.
*/
int FLC_LockInfoBlock(void);
/**@} end of group flc */
#ifdef __cplusplus
}
#endif
#endif /* _FLC_H_ */