libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/essemi/es32vf2264/libraries/ALD/ES32VF2264/Source/ald_cmu.c

880 lines
23 KiB
C
Raw Permalink Normal View History

[bsp/essemi]增加rsicv芯片bsp：es32vf2264. (#7463)
2023-05-10 18:33:20 +08:00
/**
*********************************************************************************
*
* @file ald_cmu.c
* @brief CMU module driver.
*
* @version V1.0
* @date 13 Feb. 2023
* @author AE Team
* @note
* Change Logs:
* Date Author Notes
* 13 Feb. 2023 Lisq The first version
*
* Copyright (C) Shanghai Eastsoft Microelectronics Co. Ltd. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
**********************************************************************************
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
*** System clock configure ***
=================================
[..]
(+) If you don't change system clock, you can using ald_cmu_clock_config_default() API.
It will select HRC as system clock. The system clock is 48MHz.
(+) If you want to change system clock, you can using ald_cmu_clock_config() API.
You can select one of the following as system clock:
@ref CMU_CLOCK_HRC 4MHz or 48MHz
@ref CMU_CLOCK_LRC 32000Hz
@ref CMU_CLOCK_PLL 48MHz, 64MHz or 72MHz
@ref CMU_CLOCK_HOSC 32000Hz, 4MHz, 8MHz, 12MHz, 16MHz, 20MHz, 24MHz
(+) If you select CMU_CLOCK_PLL as system clock, it must config the PLL
using ald_cmu_pll_config() API.
(+) If you get current clock, you can using ald_cmu_get_clock() API.
******************************************************************************
*/
#include "ald_conf.h"
/** @addtogroup ES32VF2264_ALD
* @{
*/
/** @defgroup CMU CMU
* @brief CMU module driver
* @{
*/
/**
* @defgroup CMU_Private_Variables CMU Private Variables
* @{
*/
uint32_t __system_clock = 48000000U;
/**
* @}
*/
/** @defgroup CMU_Private_Functions CMU Private Functions
* @{
*/
/**
* @brief Update the current system clock. This function
* will be invoked, when system clock has changed.
* @param clock: The new clock.
* @retval None
*/
static void cmu_clock_update(uint32_t clock)
{
__system_clock = clock;
if (clock > 1000000)
ald_tick_init(TICK_INT_PRIORITY);
return;
}
/**
* @brief CMU module interrupt handler
* @retval None
*/
void ald_cmu_irq_handler(void)
{
/* HOSC stop */
if (READ_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIF_MSK) && READ_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIE_MSK))
{
SYSCFG_UNLOCK();
SET_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIF_MSK);
SYSCFG_LOCK();
if ((READ_BIT(CMU->HOSMCR, CMU_HOSMCR_FLAG_MSK))
&& ((READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == 3)
|| ((READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == 5))))
cmu_clock_update(4000000); /* HRC4M */
ald_cmu_irq_cbk(ALD_CMU_HOSC_STOP);
}
/* HOSC start */
if (READ_BIT(CMU->HOSMCR, CMU_HOSMCR_STRIF_MSK) && READ_BIT(CMU->HOSMCR, CMU_HOSMCR_STRIE_MSK))
{
SYSCFG_UNLOCK();
SET_BIT(CMU->HOSMCR, CMU_HOSMCR_STRIF_MSK);
SYSCFG_LOCK();
if (!(READ_BIT(CMU->HOSMCR, CMU_HOSMCR_FLAG_MSK))
&& ((READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == 3)))
{
if(READ_BITS(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, CMU_HOSCCFG_FREQ_POSS) > 0x5)
cmu_clock_update(4000000); /* HOSC4M */
else
cmu_clock_update((READ_BITS(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, CMU_HOSCCFG_FREQ_POSS) + 1) * 4000000);
}
ald_cmu_irq_cbk(ALD_CMU_HOSC_START);
}
/* PLL unlock */
if (READ_BIT(CMU->PULMCR, CMU_PULMCR_ULKIF_MSK) && READ_BIT(CMU->PULMCR, CMU_PULMCR_ULKIE_MSK))
{
SYSCFG_UNLOCK();
SET_BIT(CMU->PULMCR, CMU_PULMCR_ULKIF_MSK);
SYSCFG_LOCK();
if (READ_BIT(CMU->PULMCR, CMU_PULMCR_CLKS_MSK)
&& ((READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == 3)
|| ((READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == 5))))
cmu_clock_update(4000000); /* HRC4M */
ald_cmu_irq_cbk(ALD_CMU_PLL_UNLOCK);
}
return;
}
/**
* @}
*/
/** @defgroup CMU_Public_Functions CMU Public Functions
* @{
*/
/** @defgroup CMU_Public_Functions_Group1 System clock configuration
* @brief System clock configuration functions
*
==============================================================================
##### System clock Configuration functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Configure system clock using default parameters.
(+) Configure system clock using specified parameters.
(+) Configure PLL using specified parameters.
(+) Get system clock.
* @{
*/
/**
* @brief Configure system clock using default.
* Select CMU_CLOCK_HRC(48MHz) as system clock and
* enable CMU_CLOCK_LRC(32000Hz).
* @retval The status of ALD.
*/
ald_status_t ald_cmu_clock_config_default(void)
{
uint32_t cnt = 4000, tmp;
ald_flash_wait_config(2);
SYSCFG_UNLOCK();
WRITE_REG(CMU->CFGR, 0x0);
tmp = READ_REG(CMU->CLKENR);
/* Enable HRC48M */
SET_BIT(tmp, CMU_CLKENR_HRC48MEN_MSK);
WRITE_REG(CMU->CLKENR, tmp);
for (cnt = 4000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MRDY_MSK))) && (--cnt));
/* Select HRC48M */
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_HRC48M << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_HRC48M)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(48000000);
SYSCFG_LOCK();
return ALD_OK;
}
/**
* @brief Configure system clock using specified parameters
* @param clk: The parameter can be one of the following:
* @arg @ref CMU_CLOCK_HRC 4MHz or 48MHz
* @arg @ref CMU_CLOCK_LRC 32kHz
* @arg @ref CMU_CLOCK_PLL 48MHz, 64MHz, 72MHz
* @arg @ref CMU_CLOCK_HOSC 4MHz, 8MHz, 12MHz, 16MHz, 20MHz, 24MHz
* @param clock: The clock which will be set. the value depends
* on the parameter of clk.
* @retval The status of ALD.
*/
ald_status_t ald_cmu_clock_config(ald_cmu_clock_t clk, uint32_t clock)
{
uint32_t cnt = 8000;
ald_flash_wait_config(2);
assert_param(IS_CMU_CLOCK(clk));
SYSCFG_UNLOCK();
switch (clk) {
case ALD_CMU_CLOCK_HRC48M:
assert_param(clock == 48000000);
SET_BIT(CMU->CLKENR, CMU_CLKENR_HRC48MEN_MSK);
for (cnt = 4000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_HRC48M << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_HRC48M)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(clock);
break;
case ALD_CMU_CLOCK_LRC:
assert_param(clock == 32000);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_LRCRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_LRC << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_LRC)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(clock);
break;
case ALD_CMU_CLOCK_HOSC:
assert_param(clock == 4000000 || clock == 8000000 || clock == 12000000 ||
clock == 16000000 || clock == 20000000 || clock == 24000000);
if(clock > 12000000)
SET_BIT(CMU->CLKENR, CMU_CLKENR_HOSCFLYBPS_MSK); /* HOSC > 12MHz, enable HOSC Bypass Filter */
SET_BIT(CMU->CLKENR, CMU_CLKENR_HOSCEN_MSK);
MODIFY_REG(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, clock / 4000000 - 1);
for (cnt = 8000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HOSCACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HOSCRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_HOSC << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_HOSC)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(clock);
break;
case ALD_CMU_CLOCK_PLL:
assert_param(clock == 72000000 || clock == 64000000 || clock == 48000000);
SET_BIT(CMU->CLKENR, CMU_CLKENR_PLLEN_MSK);
for (cnt = 4000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_PLLACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_PLLRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_PLL << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_PLL)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(clock);
break;
case ALD_CMU_CLOCK_HRC4M:
assert_param(clock == 4000000);
SET_BIT(CMU->CLKENR, CMU_CLKENR_HRC4MEN_MSK);
for (cnt = 4000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC4MACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC4MRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_HRC4M << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
if (READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) != ALD_CMU_CLOCK_HRC4M)
{
SYSCFG_LOCK();
return ALD_ERROR;
}
cmu_clock_update(clock);
break;
default:
break;
}
SYSCFG_LOCK();
return ALD_OK;
}
/**
* @brief Configure PLL using specified parameters.
* @param input: The input clock type.
* @param output: The output clock which can be 48MHz/64MHz/72MHz.
* @retval None
*/
void ald_cmu_pll_config(ald_cmu_pll_input_t input, ald_cmu_pll_output_t output)
{
uint32_t cnt = 4000;
assert_param(IS_CMU_PLL_INPUT(input));
assert_param(IS_CMU_PLL_OUTPUT(output));
SYSCFG_UNLOCK();
if(READ_BITS(CMU->CSR, CMU_CSR_SYS_STU_MSK, CMU_CSR_SYS_STU_POSS) == ALD_CMU_CLOCK_PLL)
{
SET_BIT(CMU->CLKENR, CMU_CLKENR_HRC48MEN_MSK);
for (cnt = 4000; cnt; --cnt);
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MACT_MSK))) && (--cnt));
cnt = 4000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HRC48MRDY_MSK))) && (--cnt));
MODIFY_REG(CMU->CSR, CMU_CSR_SYS_CMD_MSK, ALD_CMU_CLOCK_HRC48M << CMU_CSR_SYS_CMD_POSS);
cnt = 4000;
while (READ_BIT(CMU->CSR, CMU_CSR_SYS_RDYN_MSK) && (--cnt));
}
if (input == ALD_CMU_PLL_INPUT_HRC4M)
{
SET_BIT(CMU->CLKENR, CMU_CLKENR_HRC4MEN_MSK);
}
else
{
SET_BIT(CMU->CLKENR, CMU_CLKENR_HOSCEN_MSK);
if(input == ALD_CMU_PLL_INPUT_HOSC4M)
{
MODIFY_REG(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, 0);
}
else if(input == ALD_CMU_PLL_INPUT_HOSC8M)
{
MODIFY_REG(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, 1);
}
else if(input == ALD_CMU_PLL_INPUT_HOSC16M)
{
/* HOSC > 12MHz, enable HOSC Bypass Filter */
SET_BIT(CMU->CLKENR, CMU_CLKENR_HOSCFLYBPS_MSK);
MODIFY_REG(CMU->HOSCCFG, CMU_HOSCCFG_FREQ_MSK, 3);
}
cnt = 20000;
while ((!(READ_BIT(CMU->CLKSR, CMU_CLKSR_HOSCRDY_MSK))) && (--cnt));
}
CLEAR_BIT(CMU->CLKENR, CMU_CLKENR_PLLEN_MSK);
MODIFY_REG(CMU->PLLCFG, CMU_PLLCFG_REFS_MSK, input << CMU_PLLCFG_REFS_POSS);
MODIFY_REG(CMU->PLLCFG, CMU_PLLCFG_CLKOS_MSK, output << CMU_PLLCFG_CLKOS_POSS);
SET_BIT(CMU->PULMCR, CMU_PULMCR_EN_MSK);
MODIFY_REG(CMU->PULMCR, CMU_PULMCR_MODE_MSK, 0x2 << CMU_PULMCR_MODE_POSS);
SYSCFG_LOCK();
return;
}
/**
* @brief Gets current system clock.
* @retval The value of system clock.
*/
uint32_t ald_cmu_get_clock(void)
{
return __system_clock;
}
/**
* @}
*/
/**
* @brief Configure the bus division.
* @param bus: The type of bus:
* @arg CMU_SYS
* @arg CMU_PCLK
* @param div: The value of divider.
* @retval None
*/
void ald_cmu_div_config(ald_cmu_bus_t bus, ald_cmu_div_t div)
{
assert_param(IS_CMU_BUS(bus));
assert_param(IS_CMU_DIV(div));
SYSCFG_UNLOCK();
switch (bus)
{
case ALD_CMU_SYS:
MODIFY_REG(CMU->CFGR, CMU_CFGR_SYSDIV_MSK, div << CMU_CFGR_SYSDIV_POSS);
ald_tick_init(TICK_INT_PRIORITY);
break;
case ALD_CMU_PCLK:
MODIFY_REG(CMU->CFGR, CMU_CFGR_PCLKDIV_MSK, div << CMU_CFGR_PCLKDIV_POSS);
break;
default:
break;
}
SYSCFG_LOCK();
return;
}
/**
* @brief Get SYS clock.
* @retval The value of SYS clock.
*/
uint32_t ald_cmu_get_sys_clock(void)
{
uint32_t sys_div = READ_BITS(CMU->CFGR, CMU_CFGR_SYSDIV_MSK, CMU_CFGR_SYSDIV_POSS);
return __system_clock >> sys_div;
}
/**
* @brief Get APB clock.
* @retval The value of APB clock.
*/
uint32_t ald_cmu_get_pclk_clock(void)
{
uint32_t sys_div = READ_BITS(CMU->CFGR, CMU_CFGR_SYSDIV_MSK, CMU_CFGR_SYSDIV_POSS);
uint32_t apb_div = READ_BITS(CMU->CFGR, CMU_CFGR_PCLKDIV_MSK, CMU_CFGR_PCLKDIV_POSS);
return (__system_clock >> sys_div) >> apb_div;
}
/**
* @}
*/
/** @defgroup CMU_Public_Functions_Group3 Clock safe configure
* @brief Clock safe configure functions
*
* @verbatim
==============================================================================
##### Clock safe configure functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Enable/Disable outer high crystal safe mode.
(+) Enable/Disable outer low crystal safe mode.
(+) Enable/Disable PLL safe mode.
(+) Interrupt callback function.
@endverbatim
* @{
*/
/**
* @brief Enable/Disable outer high crystal safe mode.
* @param clock: the value of outer crystal frequency.
* @param status: The new status.
* @retval None
*/
void ald_cmu_hosc_safe_config(ald_cmu_hosc_range_t clock, type_func_t status)
{
assert_param(IS_CMU_HOSC_RANGE(clock));
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (status)
{
SET_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIF_MSK);
MODIFY_REG(CMU->HOSMCR, CMU_HOSMCR_FRQS_MSK, clock << CMU_HOSMCR_FRQS_POSS);
SET_BIT(CMU->HOSMCR, CMU_HOSMCR_EN_MSK);
SET_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIE_MSK);
ald_mcu_irq_config(CMU_IRQn, 3, ENABLE);
}
else
{
CLEAR_BIT(CMU->HOSMCR, CMU_HOSMCR_EN_MSK);
CLEAR_BIT(CMU->HOSMCR, CMU_HOSMCR_STPIE_MSK);
if (READ_BIT(CMU->PULMCR, CMU_PULMCR_EN_MSK) == 0)
ald_mcu_irq_config(CMU_IRQn, 3, DISABLE);
}
SYSCFG_LOCK();
return;
}
/**
* @brief Enable/Disable PLL1 safe mode.
* @param status: The new status.
* @retval None
*/
void ald_cmu_pll_safe_config(type_func_t status)
{
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (status)
{
SET_BIT(CMU->PULMCR, CMU_PULMCR_ULKIF_MSK);
MODIFY_REG(CMU->PULMCR, CMU_PULMCR_MODE_MSK, 2 << CMU_PULMCR_MODE_POSS);
SET_BIT(CMU->PULMCR, CMU_PULMCR_EN_MSK);
SET_BIT(CMU->PULMCR, CMU_PULMCR_ULKIE_MSK);
ald_mcu_irq_config(CMU_IRQn, 3, ENABLE);
}
else
{
CLEAR_BIT(CMU->PULMCR, CMU_PULMCR_EN_MSK);
CLEAR_BIT(CMU->PULMCR, CMU_PULMCR_ULKIE_MSK);
if (READ_BIT(CMU->HOSMCR, CMU_HOSMCR_EN_MSK) == 0)
ald_mcu_irq_config(CMU_IRQn, 3, DISABLE);
}
SYSCFG_LOCK();
return;
}
/**
* @brief Get current clock source.
* @retval Status:
* - 0: Current clock is PLL
* - 1: Current clock is HRC
*/
uint32_t ald_cmu_pulmcr_current_clock_source_get(void)
{
return READ_BITS(CMU->PULMCR, CMU_PULMCR_CLKS_MSK, CMU_PULMCR_CLKS_POS);
}
/**
* @brief Get clock state.
* @param sr: The state type, see @ref cmu_clock_state_t.
* @retval SET/RESET
*/
flag_status_t ald_cmu_get_clock_state(ald_cmu_clock_state_t sr)
{
assert_param(IS_CMU_CLOCK_STATE(sr));
if (READ_BIT(CMU->CLKSR, sr))
return SET;
return RESET;
}
/**
* @brief Interrupt callback function.
* @note This function is declared as __weak to be overwritten in case of other
* implementations in user file.
* @retval None
*/
__weak void ald_cmu_irq_cbk(ald_cmu_security_t se)
{
return;
}
/**
* @}
*/
/** @defgroup CMU_Public_Functions_Group4 Clock output configure
* @brief Clock output configure functions
*
* @verbatim
==============================================================================
##### Clock output configure functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Configure the high-speed clock output.
(+) Configure the low-speed clock output.
@endverbatim
* @{
*/
/**
* @brief Configure the high-speed clock output.
* @param sel: Select the source:
* @arg CMU_OUTPUT_HIGH_SEL_HOSC
* @arg CMU_OUTPUT_HIGH_SEL_HOSM
* @arg CMU_OUTPUT_HIGH_SEL_HRC4M
* @arg CMU_OUTPUT_HIGH_SEL_LRC
* @arg CMU_OUTPUT_HIGH_SEL_SYSCLK
* @arg CMU_OUTPUT_HIGH_SEL_HOSC32K
* @arg CMU_OUTPUT_HIGH_SEL_HRC48M
* @arg CMU_OUTPUT_HIGH_SEL_PLL
* @param div: The value of divider:
* @arg CMU_OUTPUT_DIV_1
* @arg CMU_OUTPUT_DIV_2
* @arg CMU_OUTPUT_DIV_4
* @arg CMU_OUTPUT_DIV_8
* @arg CMU_OUTPUT_DIV_16
* @arg CMU_OUTPUT_DIV_32
* @arg CMU_OUTPUT_DIV_64
* @arg CMU_OUTPUT_DIV_128
* @param status: The new status.
* @retval None
*/
void ald_cmu_output_high_clock_config(ald_cmu_output_high_sel_t sel,
ald_cmu_output_high_div_t div, type_func_t status)
{
assert_param(IS_CMU_OUTPUT_HIGH_SEL(sel));
assert_param(IS_CMU_OUTPUT_HIGH_DIV(div));
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (status)
{
MODIFY_REG(CMU->CLKOCR, CMU_CLKOCR_HSCOS_MSK, sel << CMU_CLKOCR_HSCOS_POSS);
MODIFY_REG(CMU->CLKOCR, CMU_CLKOCR_HSCODIV_MSK, div << CMU_CLKOCR_HSCODIV_POSS);
SET_BIT(CMU->CLKOCR, CMU_CLKOCR_HSCOEN_MSK);
}
else
{
CLEAR_BIT(CMU->CLKOCR, CMU_CLKOCR_HSCOEN_MSK);
}
SYSCFG_LOCK();
return;
}
/**
* @brief Configure the low-speed clock output.
* @param sel: Select the source:
* @arg CMU_OUTPUT_LOW_SEL_LRC
* @arg CMU_OUTPUT_LOW_SEL_BUZZ
* @param status: The new status.
* @retval None
*/
void ald_cmu_output_low_clock_config(ald_cmu_output_low_sel_t sel, type_func_t status)
{
assert_param(IS_CMU_OUTPUT_LOW_SEL(sel));
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (status)
{
MODIFY_REG(CMU->CLKOCR, CMU_CLKOCR_LSCOS_MSK, sel << CMU_CLKOCR_LSCOS_POSS);
SET_BIT(CMU->CLKOCR, CMU_CLKOCR_LSCOEN_MSK);
}
else
{
CLEAR_BIT(CMU->CLKOCR, CMU_CLKOCR_LSCOEN_MSK);
}
SYSCFG_LOCK();
return;
}
/**
* @}
*/
/** @defgroup CMU_Public_Functions_Group5 Peripheral Clock configure
* @brief Peripheral clock configure functions
*
* @verbatim
==============================================================================
##### Peripheral clock configure functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Configure buzz clock.
(+) Enable/Disable peripheral clock.
@endverbatim
* @{
*/
/**
* @brief Configure buzz clock.
* freq = sysclk / (2^(div + 1) * (dat + 1))
* @param div: The value of divider.
* @param dat: The value of coefficient.
* @param status: The new status.
* @retval None
*/
void ald_cmu_buzz_config(ald_cmu_buzz_div_t div, uint16_t dat, type_func_t status)
{
assert_param(IS_CMU_BUZZ_DIV(div));
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (status)
{
MODIFY_REG(CMU->BUZZCR, CMU_BUZZCR_DIV_MSK, div << CMU_BUZZCR_DIV_POSS);
MODIFY_REG(CMU->BUZZCR, CMU_BUZZCR_DAT_MSK, dat << CMU_BUZZCR_DAT_POSS);
SET_BIT(CMU->BUZZCR, CMU_BUZZCR_EN_MSK);
}
else
{
CLEAR_BIT(CMU->BUZZCR, CMU_BUZZCR_EN_MSK);
}
SYSCFG_LOCK();
return;
}
/**
* @brief Enable/Disable peripheral clock.
* @param perh: The type of peripheral, you can see @ref cmu_perh_t
* @param status: The new status.
* @retval None
*/
void ald_cmu_perh_clock_config(ald_cmu_perh_t perh, type_func_t status)
{
uint32_t idx, pos;
assert_param(IS_CMU_PERH(perh));
assert_param(IS_FUNC_STATE(status));
SYSCFG_UNLOCK();
if (perh == ALD_CMU_PERH_ALL) {
if (status) {
WRITE_REG(CMU->AHBENR, ~0);
WRITE_REG(CMU->APBENR, ~0);
}
else {
WRITE_REG(CMU->AHBENR, 0);
WRITE_REG(CMU->APBENR, 0);
}
SYSCFG_LOCK();
return;
}
idx = ((uint32_t)perh >> 27) & 0x1;
pos = perh & ~(0x1 << 27);
if (status) {
switch (idx) {
case 0:
SET_BIT(CMU->AHBENR, pos);
break;
case 1:
SET_BIT(CMU->APBENR, pos);
break;
default:
break;
}
}
else {
switch (idx) {
case 0:
CLEAR_BIT(CMU->AHBENR, pos);
break;
case 1:
CLEAR_BIT(CMU->APBENR, pos);
break;
default:
break;
}
}
SYSCFG_LOCK();
return;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/