newlib-cygwin/libgloss/configure.ac

dnl Process this file with autoconf to produce a configure script.
AC_INIT([libgloss],[LIBGLOSS_VERSION])
AC_CONFIG_HEADER(config.h)

if test "${enable_shared}" = "yes" ; then
  AC_MSG_WARN([Shared libraries not supported for cross compiling, ignored])
fi

AC_CONFIG_AUX_DIR(..)

dnl Support --disable-newlib-supplied-syscalls
dnl NB: This is kept in sync with the newlib/acinclude.m4 option code.
AC_ARG_ENABLE(newlib-supplied-syscalls,
[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
[case "${enableval}" in
  yes) newlib_may_supply_syscalls=yes ;;
  no)  newlib_may_supply_syscalls=no ;;
  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
 esac], [newlib_may_supply_syscalls=yes])dnl

AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)

AC_PROG_INSTALL

AC_CANONICAL_SYSTEM
AM_INIT_AUTOMAKE([foreign no-dist no-define subdir-objects 1.15.1])
AM_MAINTAINER_MODE
AM_SILENT_RULES(yes)

if test -z "${with_multisubdir}"; then
  have_multisubdir=no
else
  have_multisubdir=yes
fi
AM_CONDITIONAL(HAVE_DOC, test x$have_multisubdir = xno)
AM_CONDITIONAL(HAVE_MULTISUBDIR, test x$have_multisubdir = xyes)

AC_NO_EXECUTABLES

dnl indicates whether to run configure within the testsuite subdirectory
config_testsuite=true

dnl indicates whether to run configure within the libnosys subdirectory
config_libnosys=true

host_makefile_frag=${srcdir}/config/default.mh
target_makefile_frag=${srcdir}/config/default.mt

case "${target}" in
  aarch64*-*-*)
	config_aarch64=true
	config_testsuite=true
	;;
  arc-*-* | arceb-*-*)
	config_arc=true
	;;
  arc[[6432]]*-*-*)
	config_arc64=true
	;;
  csky*-*-*)
	config_csky=true
	;;
  epiphany-*-*)
	config_epiphany=true
	;;
  i[[3456]]86-*-elf* | i[[3456]]86-*-coff*)
	config_i386=true
	;;
  m32r-*-*)
	config_m32r=true
	;;
  m68hc11-*-* | m6811-*-* | m68hc12-*-* | m6812-*-*)
	AC_CONFIG_FILES([m68hc11/Makefile])
	subdirs="$subdirs m68hc11"
	;;
  nds32*-*-*)
	config_nds32=true
	;;
  fido-*-* | m68*-*-*)
	AC_CONFIG_FILES([m68k/Makefile])
	subdirs="$subdirs m68k"
	;;
  hppa*-*-pro*)
	AC_CONFIG_FILES([pa/Makefile])
	subdirs="$subdirs pa"
	;;
  i960-*-coff)
	config_i960=true
	;;
  sparc-*leon*-elf* | sparc-*leon*-none*)
	config_sparc_leon=true
	;;
  sparclet-*-aout* | sparc-*-elf* | sparc64-*-elf* | sparc86x-*-* | sparclite-*-*)
	config_sparc=true
	;;
  sh*-*-pe | mips*-*-pe | *arm*-wince-pe)
	config_wince=true
	;;
  mips*-*-*)
	AC_CONFIG_FILES([mips/Makefile])
	subdirs="$subdirs mips"
	target_makefile_frag=${srcdir}/config/mips.mt
	;;
  riscv*-*-*)
	config_riscv=true
	;;
  powerpc-*-*|powerpcle-*-*)
	AC_CONFIG_FILES([rs6000/Makefile])
	subdirs="$subdirs rs6000"
	host_makefile_frag=${srcdir}/config/ppc.mh
	;;
  mn10200-*-*)
	config_mn10200=true
	;;
  mn10300-*-*)
	config_mn10300=true
	;;
  bfin-*-*)
	config_bfin=true
	;;
  cr16-*-*)
	config_cr16=true
	;;
  cris-*-* | crisv32-*-*)
	AC_CONFIG_FILES([cris/Makefile])
	subdirs="$subdirs cris"
	;;
  crx-*-*)
	AC_CONFIG_FILES([crx/Makefile])
	subdirs="$subdirs crx"
	;;
  d30v-*-*)
	config_d30v=true
	;;
  fr30-*-*)
	config_fr30=true
	;;
  frv*-*-*)
	config_frv=true
	;;
  ft32*-*-*)
	config_ft32=true
	;;
  lm32*-*-*)
	config_lm32=true
	;;
  mcore-*-*)
	config_mcore=true
	;;
  mep-*-*)
	AC_CONFIG_FILES([mep/Makefile])
	subdirs="$subdirs mep"
	;;
  moxie-*-*)
	config_moxie=true
	;;
  microblaze*-*-*)
	config_microblaze=true
	;;
  mt-*-*)
	AC_CONFIG_FILES([mt/Makefile])
	subdirs="$subdirs mt"
	;;
  v850*-*-*)
	config_v850=true
	;;
  visium-*-*)
	config_visium=true
	config_testsuite=false
	;;
  xstormy16-*-*)
	config_xstormy16=true
	;;
  xtensa-*-*)
	config_xtensa=true
	;;
  m32c-*-*)
	AC_CONFIG_FILES([m32c/Makefile])
	subdirs="$subdirs m32c"
	;;
  msp430-*-elf*)
	config_msp430=true
	config_libnosys=false
	;;
  rl78*-*-elf)
	config_rl78=true
	;;
  rx*-*-elf)
	config_rx=true
	;;
  arm*-*-elf | arm*-*-coff | arm*-*-*)
	config_arm=true
	;;
  spu-*-elf)
	AC_CONFIG_FILES([spu/Makefile])
	subdirs="$subdirs spu"
	host_makefile_frag=${srcdir}/config/ppc.mh
	config_testsuite=false
	config_libnosys=false
	;;
  tic6x-*-*)
	config_tic6x=true
	config_testsuite=false
	;;
  iq2000-*-*)
	config_iq2000=true
	;;
  or1k-*-* | or1knd-*-* )
	config_or1k=true
	;;
  pru-*-*)
	config_pru=true
	;;
  nios2-*-*)
	config_nios2=true
	;;
esac
AC_SUBST(subdirs)

dnl These subdirs have converted to non-recursive make.  Hopefully someday all
dnl the ports above will too!
m4_foreach_w([SUBDIR], [
  aarch64 arc arc64 arm bfin cr16 csky d30v epiphany fr30 frv ft32 i386 i960 iq2000
  libnosys lm32
  m32r mcore microblaze mn10200 mn10300 moxie msp430
  nds32 nios2 or1k pru riscv rl78 rx sparc sparc_leon tic6x v850 visium
  wince xstormy16 xtensa
], [dnl
  AM_CONDITIONAL([CONFIG_]m4_toupper(SUBDIR), [test x$config_]SUBDIR = xtrue)
])

dnl For now, don't bother configuring testsuite
dnl
dnl if test "${config_testsuite}" = "true";
dnl   then AC_CONFIG_SUBDIRS([testsuite])
dnl fi

AC_PROG_CC
AM_PROG_AS
AM_PROG_AR
LD=${LD-ld}
AC_SUBST(LD)
AC_PROG_RANLIB
AC_CHECK_TOOL(OBJCOPY, objcopy, :)
AC_CHECK_TOOL(OBJDUMP, objdump, :)

AC_DEFINE(HAVE_GNU_LD, 1, [Using GNU LD])

AC_CACHE_CHECK([if target is ELF], libc_cv_is_elf, [dnl
  AC_PREPROC_IFELSE([AC_LANG_PROGRAM(
[[#ifndef __ELF__
# error "not ELF"
#endif
]])], [libc_cv_is_elf=yes], [libc_cv_is_elf=no])
])
if test "x${libc_cv_is_elf}" = "xyes"; then
  AC_DEFINE(HAVE_ELF, 1, [Using ELF format])
fi

AC_CACHE_CHECK([for .previous assembler directive],
	       libc_cv_asm_previous_directive, [dnl
  libc_cv_asm_previous_directive=no
  cat > conftest.s <<EOF
.section foo_section
.previous
EOF
  if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s 1>&AC_FD_CC); then
    libc_cv_asm_previous_directive=yes
  fi
  rm -f conftest*])
if test "x${libc_cv_asm_previous_directive}" = "xyes"; then
  AC_DEFINE(HAVE_ASM_PREVIOUS_DIRECTIVE, 1, [.previous directive allowed])
fi

AC_CACHE_CHECK([for .popsection assembler directive],
	       libc_cv_asm_popsection_directive, [dnl
  libc_cv_asm_popsection_directive=no
  cat > conftest.s <<EOF
.pushsection foo_section
.popsection
EOF
  if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s 1>&AC_FD_CC); then
    libc_cv_asm_popsection_directive=yes
  fi
  rm -f conftest*])
if test "x${libc_cv_asm_popsection_directive}" = "xyes"; then
  AC_DEFINE(HAVE_ASM_POPSECTION_DIRECTIVE, 1, [.pushsection/.popsection directives allowed])
fi

AC_CACHE_CHECK([for section attributes],
	       libc_cv_section_attributes, [dnl
  libc_cv_section_attributes=no
  cat > conftest.c <<EOF
int secttest __attribute__ ((section (".gnu.warning.secttest"))) = 10;
int main() {}
EOF
  if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.c 1>&AC_FD_CC); then
    libc_cv_section_attributes=yes
  fi
  rm -f conftest*])
if test "x${libc_cv_section_attributes}" = "xyes"; then
  AC_DEFINE(HAVE_SECTION_ATTRIBUTES, 1, [support for section attributes])
fi

AC_CACHE_CHECK([for symbol prefix], libc_cv_symbol_prefix, [dnl
  cat > conftest.c <<\EOF
foo () { }
EOF
dnl
  libc_cv_symbol_prefix=''
  if AC_TRY_COMMAND([${CC-cc} -S conftest.c -o - | fgrep "\$foo" > /dev/null]); then
    libc_cv_symbol_prefix='$'
  else
    if AC_TRY_COMMAND([${CC-cc} -S conftest.c -o - | fgrep "_foo" > /dev/null]); then
      libc_cv_symbol_prefix=_
    fi
  fi
  rm -f conftest* ])
AC_DEFINE_UNQUOTED(__SYMBOL_PREFIX, "$libc_cv_symbol_prefix", [symbol prefix])

m4_include([aarch64/acinclude.m4])
m4_include([arm/acinclude.m4])
m4_include([i386/acinclude.m4])
m4_include([libnosys/acinclude.m4])
m4_include([m68k/acinclude.m4])
m4_include([mcore/acinclude.m4])
m4_include([mips/acinclude.m4])
m4_include([mn10300/acinclude.m4])
m4_include([moxie/acinclude.m4])
m4_include([sparc/acinclude.m4])
m4_include([xtensa/acinclude.m4])

AC_CACHE_CHECK([for compiler search settings], libc_cv_compiler_isystem, [dnl
  for subdir in include include-fixed; do
    AS_IF([dir=`$CC -print-file-name=$subdir`], [dnl
      AS_IF([test -n "$dir"], [dnl
        libc_cv_compiler_isystem="$libc_cv_compiler_isystem -isystem $dir"
      ])
    ])
  done
])
CC="$CC -nostdinc $libc_cv_compiler_isystem"

dnl We have to assign the same value to other variables because autoconf
dnl doesn't provide a mechanism to substitute a replacement keyword with
dnl arbitrary data or pathnames.
dnl
host_makefile_frag_path=$host_makefile_frag
AC_SUBST(host_makefile_frag_path)
AC_SUBST_FILE(host_makefile_frag)
target_makefile_frag_path=$target_makefile_frag
AC_SUBST(target_makefile_frag_path)
AC_SUBST_FILE(target_makefile_frag)

dnl AM_ENABLE_MULTILIB only processes the top-level Makefile, but we want the
dnl multilib settings to propagate to all sub-Makefiles that we recurse into
dnl too.  This can go away if we ever get rid of sub-Makefiles and only use
dnl Automake + makefile include fragments.
AC_OUTPUT_COMMANDS([
for subdir in $subdirs; do
  case " $CONFIG_FILES " in
   *" $subdir/Makefile "*)
     ac_file=$subdir/Makefile . ${multi_basedir}/config-ml.in
     ;;
  esac
done], [subdirs="$subdirs"])

AM_ENABLE_MULTILIB(, ..)

AC_CONFIG_FILES([Makefile])
AC_OUTPUT