newlib-cygwin/libgloss/aarch64/Makefile.in

192 lines
5.7 KiB
Makefile

# Copyright (c) 2012 ARM Ltd. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. The name of the company may not be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY ARM LTD ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
DESTDIR =
VPATH = @srcdir@ @srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
objtype = @objtype@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
SHELL = /bin/sh
CC = @CC@
AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@
SUBDIRS = @subdirs@
OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
then echo ${objroot}/../binutils/objdump ; \
else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
then echo ${objroot}/../binutils/objcopy ; \
else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
OBJS = ftruncate.o libcfunc.o syscalls.o truncate.o _exit.o _kill.o
CRT0 = crt0.o
CRT0_INSTALL = install-crt0
CRT0_INSTALL = install-crt0
RDIMON_CRT0 = rdimon-crt0.o
RDIMON_BSP = librdimon.a
RDIMON_OBJS = $(patsubst %,rdimon-%,$(OBJS))
RDIMON_SCRIPTS = rdimon.specs aem-ve.specs aem-validation.specs
RDIMON_INSTALL = install-rdimon
CFLAGS = -g
# Host specific makefile fragment comes in here.
@host_makefile_frag@
#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: ${CRT0} ${RDIMON_CRT0} ${RDIMON_BSP} ${RDIMON_SCRIPTS}
@rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
for dir in .. ${SUBDIRS}; do \
if [ x$$dir != x.. ]; then \
if [ -d $$dir ]; then \
(cd $$dir; $(MAKE) $(FLAGS_TO_PASS)); \
else true; fi; \
else true; fi; \
done
#
# here's where we build the test programs for each target
#
.PHONY: test
test:
#
crt0.o: crt0.S
rdimon-crt0.o: crt0.S
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
#rdimon-trap.o: trap.S
# $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-_exit.o: _exit.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-ftruncate.o: ftruncate.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-_kill.o: _kill.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-libcfunc.o: libcfunc.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-syscalls.o: syscalls.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
rdimon-truncate.o: truncate.c
$(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<
$(RDIMON_BSP): $(RDIMON_OBJS)
${AR} ${ARFLAGS} $@ $^
${RANLIB} $@
clean mostlyclean:
rm -f a.out core *.i *.o *-test *.srec *.dis *.x $(SIM_BSP) ${RDIMON_SCRIPTS}
@rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
for dir in .. ${SUBDIRS}; do \
if [ x$$dir != x.. ]; then \
if [ -d $$dir ]; then \
(cd $$dir; $(MAKE) $(FLAGS_TO_PASS) clean); \
else true; fi; \
else true; fi; \
done
distclean maintainer-clean realclean: clean
rm -f Makefile config.status *~
.PHONY: install info install-info clean-info
install: ${CRT0_INSTALL} ${RDIMON_INSTALL}
@rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
for dir in .. ${SUBDIRS}; do \
if [ x$$dir != x.. ]; then \
if [ -d $$dir ]; then \
(cd $$dir; $(MAKE) $(FLAGS_TO_PASS) install); \
else true; fi; \
else true; fi; \
done
install-crt0:
${INSTALL_DATA} ${CRT0} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x
install-rdimon:
set -e; for x in ${RDIMON_CRT0} ${RDIMON_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
set -e; for x in ${RDIMON_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
# Make copies of the scripts to facilitate in-tree bootstrapping.
${RDIMON_SCRIPTS}: %: ${objtype}%
cp $< $@
doc:
info:
install-info:
clean-info:
Makefile: Makefile.in config.status @host_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck