newlib-cygwin/newlib/libc/machine/powerpc/setjmp.S

269 lines
7.1 KiB
ArmAsm

/* This is a simple version of setjmp and longjmp for the PowerPC.
Ian Lance Taylor, Cygnus Support, 9 Feb 1994.
Modified by Jeff Johnston, Red Hat Inc. 2 Oct 2001. */
#include "ppc-asm.h"
FUNC_START(setjmp)
#ifdef __ALTIVEC__
addi 3,3,15 # align Altivec to 16 byte boundary
rlwinm 3,3,0,0,27
#else
addi 3,3,7 # align to 8 byte boundary
rlwinm 3,3,0,0,28
#endif
#if __SPE__
/* If we are E500, then save 64-bit registers. */
evstdd 1,0(3) # offset 0
evstdd 2,8(3) # offset 8
evstdd 13,16(3) # offset 16
evstdd 14,24(3) # offset 24
evstdd 15,32(3) # offset 32
evstdd 16,40(3) # offset 40
evstdd 17,48(3) # offset 48
evstdd 18,56(3) # offset 56
evstdd 19,64(3) # offset 64
evstdd 20,72(3) # offset 72
evstdd 21,80(3) # offset 80
evstdd 22,88(3) # offset 88
evstdd 23,96(3) # offset 96
evstdd 24,104(3) # offset 104
evstdd 25,112(3) # offset 112
evstdd 26,120(3) # offset 120
evstdd 27,128(3) # offset 128
evstdd 28,136(3) # offset 136
evstdd 29,144(3) # offset 144
evstdd 30,152(3) # offset 152
evstdd 31,160(3) # offset 160
/* Add 164 to r3 to account for the amount of data we just
stored. Note that we are not adding 168 because the next
store instruction uses an offset of 4. */
addi 3,3,164
#else
stw 1,0(3) # offset 0
stwu 2,4(3) # offset 4
stwu 13,4(3) # offset 8
stwu 14,4(3) # offset 12
stwu 15,4(3) # offset 16
stwu 16,4(3) # offset 20
stwu 17,4(3) # offset 24
stwu 18,4(3) # offset 28
stwu 19,4(3) # offset 32
stwu 20,4(3) # offset 36
stwu 21,4(3) # offset 40
stwu 22,4(3) # offset 44
stwu 23,4(3) # offset 48
stwu 24,4(3) # offset 52
stwu 25,4(3) # offset 56
stwu 26,4(3) # offset 60
stwu 27,4(3) # offset 64
stwu 28,4(3) # offset 68
stwu 29,4(3) # offset 72
stwu 30,4(3) # offset 76
stwu 31,4(3) # offset 80
#endif
/* From this point on until the end of this function, add 84
to the offset shown if __SPE__. This difference comes from
the fact that we save 21 64-bit registers instead of 21
32-bit registers above. */
mflr 4
stwu 4,4(3) # offset 84
mfcr 4
stwu 4,4(3) # offset 88
# one word pad to get floating point aligned on 8 byte boundary
/* Check whether we need to save FPRs. Checking __NO_FPRS__
on its own would be enough for GCC 4.1 and above, but older
compilers only define _SOFT_FLOAT, so check both. */
#if !defined (__NO_FPRS__) && !defined (_SOFT_FLOAT)
stfdu 14,8(3) # offset 96
stfdu 15,8(3) # offset 104
stfdu 16,8(3) # offset 112
stfdu 17,8(3) # offset 120
stfdu 18,8(3) # offset 128
stfdu 19,8(3) # offset 136
stfdu 20,8(3) # offset 144
stfdu 21,8(3) # offset 152
stfdu 22,8(3) # offset 160
stfdu 23,8(3) # offset 168
stfdu 24,8(3) # offset 176
stfdu 25,8(3) # offset 184
stfdu 26,8(3) # offset 192
stfdu 27,8(3) # offset 200
stfdu 28,8(3) # offset 208
stfdu 29,8(3) # offset 216
stfdu 30,8(3) # offset 224
stfdu 31,8(3) # offset 232
#endif
/* This requires a total of 21 * 4 + 18 * 8 + 4 + 4 + 4
bytes == 60 * 4 bytes == 240 bytes. */
#ifdef __ALTIVEC__
/* save Altivec vrsave and vr20-vr31 registers */
mfspr 4,256 # vrsave register
stwu 4,16(3) # offset 248
addi 3,3,8
stvx 20,0,3 # offset 256
addi 3,3,16
stvx 21,0,3 # offset 272
addi 3,3,16
stvx 22,0,3 # offset 288
addi 3,3,16
stvx 23,0,3 # offset 304
addi 3,3,16
stvx 24,0,3 # offset 320
addi 3,3,16
stvx 25,0,3 # offset 336
addi 3,3,16
stvx 26,0,3 # offset 352
addi 3,3,16
stvx 27,0,3 # offset 368
addi 3,3,16
stvx 28,0,3 # offset 384
addi 3,3,16
stvx 29,0,3 # offset 400
addi 3,3,16
stvx 30,0,3 # offset 416
addi 3,3,16
stvx 31,0,3 # offset 432
/* This requires a total of 240 + 8 + 8 + 12 * 16 == 448 bytes. */
#endif
li 3,0
blr
FUNC_END(setjmp)
FUNC_START(longjmp)
#ifdef __ALTIVEC__
addi 3,3,15 # align Altivec to 16 byte boundary
rlwinm 3,3,0,0,27
#else
addi 3,3,7 # align to 8 byte boundary
rlwinm 3,3,0,0,28
#endif
#if __SPE__
/* If we are E500, then restore 64-bit registers. */
evldd 1,0(3) # offset 0
evldd 2,8(3) # offset 8
evldd 13,16(3) # offset 16
evldd 14,24(3) # offset 24
evldd 15,32(3) # offset 32
evldd 16,40(3) # offset 40
evldd 17,48(3) # offset 48
evldd 18,56(3) # offset 56
evldd 19,64(3) # offset 64
evldd 20,72(3) # offset 72
evldd 21,80(3) # offset 80
evldd 22,88(3) # offset 88
evldd 23,96(3) # offset 96
evldd 24,104(3) # offset 104
evldd 25,112(3) # offset 112
evldd 26,120(3) # offset 120
evldd 27,128(3) # offset 128
evldd 28,136(3) # offset 136
evldd 29,144(3) # offset 144
evldd 30,152(3) # offset 152
evldd 31,160(3) # offset 160
/* Add 164 to r3 to account for the amount of data we just
loaded. Note that we are not adding 168 because the next
load instruction uses an offset of 4. */
addi 3,3,164
#else
lwz 1,0(3) # offset 0
lwzu 2,4(3) # offset 4
lwzu 13,4(3) # offset 8
lwzu 14,4(3) # offset 12
lwzu 15,4(3) # offset 16
lwzu 16,4(3) # offset 20
lwzu 17,4(3) # offset 24
lwzu 18,4(3) # offset 28
lwzu 19,4(3) # offset 32
lwzu 20,4(3) # offset 36
lwzu 21,4(3) # offset 40
lwzu 22,4(3) # offset 44
lwzu 23,4(3) # offset 48
lwzu 24,4(3) # offset 52
lwzu 25,4(3) # offset 56
lwzu 26,4(3) # offset 60
lwzu 27,4(3) # offset 64
lwzu 28,4(3) # offset 68
lwzu 29,4(3) # offset 72
lwzu 30,4(3) # offset 76
lwzu 31,4(3) # offset 80
#endif
/* From this point on until the end of this function, add 84
to the offset shown if __SPE__. This difference comes from
the fact that we restore 21 64-bit registers instead of 21
32-bit registers above. */
lwzu 5,4(3) # offset 84
mtlr 5
lwzu 5,4(3) # offset 88
mtcrf 255,5
# one word pad to get floating point aligned on 8 byte boundary
/* Check whether we need to restore FPRs. Checking
__NO_FPRS__ on its own would be enough for GCC 4.1 and
above, but older compilers only define _SOFT_FLOAT, so
check both. */
#if !defined (__NO_FPRS__) && !defined (_SOFT_FLOAT)
lfdu 14,8(3) # offset 96
lfdu 15,8(3) # offset 104
lfdu 16,8(3) # offset 112
lfdu 17,8(3) # offset 120
lfdu 18,8(3) # offset 128
lfdu 19,8(3) # offset 136
lfdu 20,8(3) # offset 144
lfdu 21,8(3) # offset 152
lfdu 22,8(3) # offset 160
lfdu 23,8(3) # offset 168
lfdu 24,8(3) # offset 176
lfdu 25,8(3) # offset 184
lfdu 26,8(3) # offset 192
lfdu 27,8(3) # offset 200
lfdu 28,8(3) # offset 208
lfdu 29,8(3) # offset 216
lfdu 30,8(3) # offset 224
lfdu 31,8(3) # offset 232
#endif
#ifdef __ALTIVEC__
/* restore Altivec vrsave and v20-v31 registers */
lwzu 5,16(3) # offset 248
mtspr 256,5 # vrsave
addi 3,3,8
lvx 20,0,3 # offset 256
addi 3,3,16
lvx 21,0,3 # offset 272
addi 3,3,16
lvx 22,0,3 # offset 288
addi 3,3,16
lvx 23,0,3 # offset 304
addi 3,3,16
lvx 24,0,3 # offset 320
addi 3,3,16
lvx 25,0,3 # offset 336
addi 3,3,16
lvx 26,0,3 # offset 352
addi 3,3,16
lvx 27,0,3 # offset 368
addi 3,3,16
lvx 28,0,3 # offset 384
addi 3,3,16
lvx 29,0,3 # offset 400
addi 3,3,16
lvx 30,0,3 # offset 416
addi 3,3,16
lvx 31,0,3 # offset 432
#endif
mr. 3,4
bclr+ 4,2
li 3,1
blr
FUNC_END(longjmp)