2102 lines
118 KiB
C
2102 lines
118 KiB
C
/*
|
|
* The authors hereby grant permission to use, copy, modify, distribute,
|
|
* and license this software and its documentation for any purpose, provided
|
|
* that existing copyright notices are retained in all copies and that this
|
|
* notice is included verbatim in any distributions. No written agreement,
|
|
* license, or royalty fee is required for any of the authorized uses.
|
|
* Modifications to this software may be copyrighted by their authors
|
|
* and need not follow the licensing terms described here, provided that
|
|
* the new terms are clearly indicated on the first page of each file where
|
|
* they apply.
|
|
*/
|
|
|
|
/*
|
|
** defBF52x_base.h
|
|
**
|
|
** Copyright (C) 2008, 2009 Analog Devices, Inc.
|
|
**
|
|
************************************************************************************
|
|
**
|
|
** This include file contains a list of macro "defines" to enable the programmer
|
|
** to use symbolic names for the registers common to the ADSP-BF52x peripherals.
|
|
**
|
|
************************************************************************************
|
|
** System MMR Register Map
|
|
************************************************************************************/
|
|
|
|
#ifndef _DEF_BF52X_H
|
|
#define _DEF_BF52X_H
|
|
|
|
#ifdef _MISRA_RULES
|
|
#pragma diag(push)
|
|
#pragma diag(suppress:misra_rule_19_4)
|
|
#pragma diag(suppress:misra_rule_19_7)
|
|
#endif /* _MISRA_RULES */
|
|
|
|
|
|
/* ************************************************************** */
|
|
/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */
|
|
/* ************************************************************** */
|
|
|
|
/* ==== begin from defBF534.h ==== */
|
|
|
|
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
|
|
#define PLL_CTL 0xFFC00000 /* PLL Control Register */
|
|
#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
|
|
#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
|
|
#define PLL_STAT 0xFFC0000C /* PLL Status Register */
|
|
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
|
|
#define CHIPID 0xFFC00014 /* Device ID Register */
|
|
|
|
|
|
/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
|
|
#define SWRST 0xFFC00100 /* Software Reset Register */
|
|
#define SYSCR 0xFFC00104 /* System Configuration Register */
|
|
|
|
#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
|
|
/* legacy register name (below) provided for backwards code compatibility */
|
|
#define SIC_IMASK SIC_IMASK0
|
|
|
|
#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
|
|
#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
|
|
#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
|
|
#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
|
|
|
|
#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
|
|
/* legacy register name (below) provided for backwards code compatibility */
|
|
#define SIC_ISR SIC_ISR0
|
|
|
|
#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
|
|
/* legacy register name (below) provided for backwards code compatibility */
|
|
#define SIC_IWR SIC_IWR0
|
|
|
|
/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
|
|
#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
|
|
#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
|
|
#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
|
|
#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
|
|
#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
|
|
#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
|
|
#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
|
|
|
|
|
|
/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
|
|
#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
|
|
#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
|
|
#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
|
|
|
|
|
|
/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
|
|
#define RTC_STAT 0xFFC00300 /* RTC Status Register */
|
|
#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
|
|
#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
|
|
#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
|
|
#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
|
|
#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
|
|
#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
|
|
|
|
|
|
/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
|
|
#define UART0_THR 0xFFC00400 /* Transmit Holding register */
|
|
#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
|
|
#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
|
|
#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
|
|
#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
|
|
#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
|
|
#define UART0_LCR 0xFFC0040C /* Line Control Register */
|
|
#define UART0_MCR 0xFFC00410 /* Modem Control Register */
|
|
#define UART0_LSR 0xFFC00414 /* Line Status Register */
|
|
#define UART0_MSR 0xFFC00418 /* Modem Status Register */
|
|
#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
|
|
#define UART0_GCTL 0xFFC00424 /* Global Control Register */
|
|
|
|
|
|
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
|
|
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
|
|
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
|
|
#define SPI_STAT 0xFFC00508 /* SPI Status register */
|
|
#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
|
|
#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
|
|
#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
|
|
#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
|
|
|
|
|
|
/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
|
|
#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
|
|
#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
|
|
#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
|
|
#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
|
|
|
|
#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
|
|
#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
|
|
#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
|
|
#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
|
|
|
|
#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
|
|
#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
|
|
#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
|
|
#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
|
|
|
|
#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
|
|
#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
|
|
#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
|
|
#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
|
|
|
|
#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
|
|
#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
|
|
#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
|
|
#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
|
|
|
|
#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
|
|
#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
|
|
#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
|
|
#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
|
|
|
|
#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
|
|
#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
|
|
#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
|
|
#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
|
|
|
|
#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
|
|
#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
|
|
#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
|
|
#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
|
|
|
|
#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
|
|
#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
|
|
#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
|
|
|
|
|
|
/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
|
|
#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
|
|
#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
|
|
#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
|
|
#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
|
|
#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
|
|
#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
|
|
#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
|
|
#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
|
|
#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
|
|
#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
|
|
#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
|
|
#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
|
|
#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
|
|
#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
|
|
#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
|
|
|
|
|
|
/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
|
|
#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
|
|
#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
|
|
#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
|
|
#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
|
|
#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
|
|
#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
|
|
#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
|
|
#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
|
|
#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
|
|
#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
|
|
#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
|
|
|
|
|
|
/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
|
|
#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
|
|
#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
|
|
#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
|
|
#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
|
|
#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
|
|
#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
|
|
#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
|
|
#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
|
|
#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
|
|
#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
|
|
#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
|
|
|
|
|
|
/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
|
|
#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
|
|
#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
|
|
#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
|
|
#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
|
|
#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
|
|
#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
|
|
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
|
|
|
|
|
|
/* DMA Traffic Control Registers */
|
|
#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
|
|
#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
|
|
|
|
/* Alternate deprecated register names (below) provided for backwards code compatibility */
|
|
#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
|
|
#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
|
|
|
|
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
|
|
#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
|
|
#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
|
|
#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
|
|
#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
|
|
#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
|
|
#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
|
|
#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
|
|
#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
|
|
#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
|
|
#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
|
|
#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
|
|
#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
|
|
#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
|
|
|
|
#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
|
|
#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
|
|
#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
|
|
#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
|
|
#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
|
|
#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
|
|
#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
|
|
#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
|
|
#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
|
|
#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
|
|
#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
|
|
#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
|
|
#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
|
|
|
|
#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
|
|
#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
|
|
#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
|
|
#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
|
|
#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
|
|
#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
|
|
#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
|
|
#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
|
|
#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
|
|
#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
|
|
#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
|
|
#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
|
|
#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
|
|
|
|
#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
|
|
#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
|
|
#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
|
|
#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
|
|
#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
|
|
#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
|
|
#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
|
|
#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
|
|
#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
|
|
#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
|
|
#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
|
|
#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
|
|
#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
|
|
|
|
#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
|
|
#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
|
|
#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
|
|
#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
|
|
#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
|
|
#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
|
|
#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
|
|
#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
|
|
#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
|
|
#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
|
|
#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
|
|
#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
|
|
#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
|
|
|
|
#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
|
|
#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
|
|
#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
|
|
#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
|
|
#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
|
|
#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
|
|
#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
|
|
#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
|
|
#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
|
|
#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
|
|
#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
|
|
#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
|
|
#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
|
|
|
|
#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
|
|
#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
|
|
#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
|
|
#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
|
|
#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
|
|
#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
|
|
#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
|
|
#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
|
|
#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
|
|
#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
|
|
#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
|
|
#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
|
|
#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
|
|
|
|
#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
|
|
#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
|
|
#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
|
|
#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
|
|
#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
|
|
#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
|
|
#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
|
|
#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
|
|
#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
|
|
#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
|
|
#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
|
|
#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
|
|
#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
|
|
|
|
#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
|
|
#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
|
|
#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
|
|
#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
|
|
#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
|
|
#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
|
|
#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
|
|
#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
|
|
#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
|
|
#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
|
|
#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
|
|
#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
|
|
#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
|
|
|
|
#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
|
|
#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
|
|
#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
|
|
#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
|
|
#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
|
|
#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
|
|
#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
|
|
#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
|
|
#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
|
|
#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
|
|
#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
|
|
#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
|
|
#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
|
|
|
|
#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
|
|
#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
|
|
#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
|
|
#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
|
|
#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
|
|
#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
|
|
#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
|
|
#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
|
|
#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
|
|
#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
|
|
#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
|
|
#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
|
|
#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
|
|
|
|
#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
|
|
#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
|
|
#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
|
|
#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
|
|
#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
|
|
#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
|
|
#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
|
|
#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
|
|
#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
|
|
#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
|
|
#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
|
|
#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
|
|
#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
|
|
|
|
#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
|
|
#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
|
|
#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
|
|
#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
|
|
#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
|
|
#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
|
|
#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
|
|
#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
|
|
#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
|
|
#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
|
|
#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
|
|
#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
|
|
#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
|
|
|
|
#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
|
|
#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
|
|
#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
|
|
#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
|
|
#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
|
|
#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
|
|
#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
|
|
#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
|
|
#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
|
|
#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
|
|
#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
|
|
#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
|
|
#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
|
|
|
|
#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
|
|
#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
|
|
#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
|
|
#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
|
|
#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
|
|
#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
|
|
#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
|
|
#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
|
|
#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
|
|
#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
|
|
#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
|
|
#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
|
|
#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
|
|
|
|
#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
|
|
#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
|
|
#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
|
|
#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
|
|
#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
|
|
#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
|
|
#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
|
|
#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
|
|
#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
|
|
#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
|
|
#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
|
|
#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
|
|
#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
|
|
|
|
|
|
/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
|
|
#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
|
|
#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
|
|
#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
|
|
#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
|
|
#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
|
|
|
|
|
|
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
|
|
#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
|
|
#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
|
|
#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
|
|
#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
|
|
#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
|
|
#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
|
|
#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
|
|
#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
|
|
#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
|
|
#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
|
|
#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
|
|
#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
|
|
#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
|
|
#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
|
|
#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
|
|
#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
|
|
|
|
|
|
/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
|
|
#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
|
|
#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
|
|
#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
|
|
#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
|
|
#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
|
|
#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
|
|
#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
|
|
#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
|
|
#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
|
|
#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
|
|
#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
|
|
#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
|
|
#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
|
|
#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
|
|
#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
|
|
|
|
|
|
/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
|
|
#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
|
|
#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
|
|
#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
|
|
#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
|
|
#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
|
|
#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
|
|
#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
|
|
#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
|
|
#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
|
|
#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
|
|
#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
|
|
#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
|
|
#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
|
|
#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
|
|
#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
|
|
|
|
|
|
/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
|
|
#define UART1_THR 0xFFC02000 /* Transmit Holding register */
|
|
#define UART1_RBR 0xFFC02000 /* Receive Buffer register */
|
|
#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
|
|
#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
|
|
#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
|
|
#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
|
|
#define UART1_LCR 0xFFC0200C /* Line Control Register */
|
|
#define UART1_MCR 0xFFC02010 /* Modem Control Register */
|
|
#define UART1_LSR 0xFFC02014 /* Line Status Register */
|
|
#define UART1_MSR 0xFFC02018 /* Modem Status Register */
|
|
#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
|
|
#define UART1_GCTL 0xFFC02024 /* Global Control Register */
|
|
|
|
|
|
/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
|
|
|
|
/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
|
|
#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
|
|
#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
|
|
#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
|
|
|
|
|
|
/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
|
|
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
|
|
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
|
|
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
|
|
#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
|
|
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
|
|
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
|
|
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
|
|
|
|
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
|
|
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
|
|
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
|
|
#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
|
|
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
|
|
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
|
|
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
|
|
|
|
/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
|
|
#define PORTF_MUX 0xFFC03210 /* Port F mux control */
|
|
#define PORTG_MUX 0xFFC03214 /* Port G mux control */
|
|
#define PORTH_MUX 0xFFC03218 /* Port H mux control */
|
|
#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
|
|
#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
|
|
#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
|
|
#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
|
|
#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
|
|
#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
|
|
#define NONGPIO_DRIVE 0xFFC03280 /* Drive strength control for non-GPIO pins */
|
|
#define NONGPIO_HYSTERESIS 0xFFC03288 /* Schmitt trigger control for non-GPIO pins */
|
|
|
|
/***********************************************************************************
|
|
** System MMR Register Bits And Macros
|
|
**
|
|
** Disclaimer: All macros are intended to make C and Assembly code more readable.
|
|
** Use these macros carefully, as any that do left shifts for field
|
|
** depositing will result in the lower order bits being destroyed. Any
|
|
** macro that shifts left to properly position the bit-field should be
|
|
** used as part of an OR to initialize a register and NOT as a dynamic
|
|
** modifier UNLESS the lower order bits are saved and ORed back in when
|
|
** the macro is used.
|
|
*************************************************************************************/
|
|
/*
|
|
** ********************* PLL AND RESET MASKS ****************************************/
|
|
/* PLL_CTL Masks */
|
|
#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
|
|
#define PLL_OFF 0x0002 /* PLL Not Powered */
|
|
#define STOPCK 0x0008 /* Core Clock Off */
|
|
#define PDWN 0x0020 /* Enter Deep Sleep Mode */
|
|
#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
|
|
#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
|
|
#define BYPASS 0x0100 /* Bypass the PLL */
|
|
#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
|
|
/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
|
|
#ifdef _MISRA_RULES
|
|
#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
|
|
#else
|
|
#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* PLL_DIV Masks */
|
|
#define SSEL 0x000F /* System Select */
|
|
#define CSEL 0x0030 /* Core Select */
|
|
#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
|
|
#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
|
|
#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
|
|
#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
|
|
/* PLL_DIV Macros */
|
|
#ifdef _MISRA_RULES
|
|
#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
|
|
#else
|
|
#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* VR_CTL Masks */
|
|
#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
|
|
#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
|
|
|
|
#define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */
|
|
#define VLEV_085 0x0040 /* VLEV = 0.85 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_090 0x0050 /* VLEV = 0.90 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_095 0x0060 /* VLEV = 0.95 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_100 0x0070 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_105 0x0080 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_110 0x0090 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_115 0x00A0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
|
|
#define VLEV_120 0x00B0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
|
|
|
|
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
|
|
#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
|
|
#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
|
|
#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
|
|
#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
|
|
#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
|
|
|
|
/* PLL_STAT Masks */
|
|
#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
|
|
#define FULL_ON 0x0002 /* Processor In Full On Mode */
|
|
#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
|
|
#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
|
|
#define VSTAT 0x0080 /* Voltage Regulator Status: Regulator at programmed voltage */
|
|
|
|
/* SWRST Masks */
|
|
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
|
|
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
|
|
#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
|
|
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
|
|
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
|
|
|
|
/* SYSCR Masks */
|
|
|
|
#define BMODE_BYPASS 0x0000 /* Bypass boot ROM, execute from 16-bit external memory */
|
|
#define BMODE_FLASH 0x0001 /* Use Boot ROM to load from 8-bit or 16-bit flash */
|
|
#define BMODE_SPIMEM 0x0003 /* Boot from serial SPI memory */
|
|
#define BMODE_SPIHOST 0x0004 /* Boot from SPI0 host (slave mode) */
|
|
#define BMODE_TWIMEM 0x0005 /* Boot from serial TWI memory */
|
|
#define BMODE_TWIHOST 0x0006 /* Boot from TWI0 host (slave mode) */
|
|
#define BMODE_UART0HOST 0x0007 /* Boot from UART0 host */
|
|
#define BMODE_UART1HOST 0x0008 /* Boot from UART1 host */
|
|
#define BMODE_SDRAMMEM 0x000A /* Boot from SDRAM memory (warm boot) */
|
|
#define BMODE_OTPMEM 0x000B /* Boot from OTP memory */
|
|
#define BMODE_HOSTDMA_ACK 0x000E /* Boot from 16-bit host DMA (ACK mode) */
|
|
#define BMODE_HOSTDMA_INT 0x000F /* Boot from 8-bit host DMA (INT mode) */
|
|
#define BMODE 0x000F /* Boot Mode. Mirror of BMODE Mode Pins */
|
|
|
|
#define BCODE 0x00F0
|
|
#define BCODE_NORMAL 0x0000 /* normal boot, update PLL/VR, quickboot as by WURESET */
|
|
#define BCODE_NOBOOT 0x0010 /* bypass boot, don't update PLL/VR */
|
|
#define BCODE_QUICKBOOT 0x0020 /* quick boot, overrule WURESET, don't update PLL/VR */
|
|
#define BCODE_ALLBOOT 0x0040 /* no quick boot, overrule WURESET, don't update PLL/VR */
|
|
#define BCODE_FULLBOOT 0x0060 /* no quick boot, overrule WURESET, update PLL/VR */
|
|
|
|
#define DCB1_PRIO 0x0100 /* DCB1 requests are urgent */
|
|
#define DCB_ROT_PRIO 0x0200 /* enable rotating DCB priority */
|
|
#define DEB1_PRIO 0x0400 /* DEB1 requests are urgent */
|
|
#define DEB_ROT_PRIO 0x0800 /* enable rotating DEB priority */
|
|
|
|
#define WURESET 0x1000 /* wakeup event since last hardware reset */
|
|
#define DFRESET 0x2000 /* recent reset was due to a double fault event */
|
|
#define WDRESET 0x4000 /* recent reset was due to a watchdog event */
|
|
#define SWRESET 0x8000 /* recent reset was issued by software */
|
|
|
|
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
|
|
/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */
|
|
#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
|
|
|
|
#define IRQ_DMA_ERR0 0x00000002 /* Error Interrupt (DMA error 0 interrupt (generic)) */
|
|
#define IRQ_DMAR0 0x00000004 /* DMAR0 Block (DMAR0 block interrupt) */
|
|
#define IRQ_DMAR1 0x00000008 /* DMAR1 Block (DMAR1 block interrupt) */
|
|
#define IRQ_DMAR0_ERR 0x00000010 /* Error Interrupt (DMAR0 overflow error interrupt) */
|
|
#define IRQ_DMAR1_ERR 0x00000020 /* Error Interrupt (DMAR1 overflow error interrupt) */
|
|
#define IRQ_PPI_ERR 0x00000040 /* Error Interrupt (PPI error interrupt) */
|
|
#define IRQ_MAC_ERR 0x00000080 /* Error Interrupt (MAC status interrupt) */
|
|
#define IRQ_SPORT0_ERR 0x00000100 /* Error Interrupt (SPORT0 status interrupt) */
|
|
#define IRQ_SPORT1_ERR 0x00000200 /* Error Interrupt (SPORT1 status interrupt) */
|
|
#define IRQ_UART0_ERR 0x00001000 /* Error Interrupt (UART0 status interrupt) */
|
|
#define IRQ_UART1_ERR 0x00002000 /* Error Interrupt (UART1 status interrupt) */
|
|
#define IRQ_RTC 0x00004000 /* Real Time Clock Interrupt */
|
|
#define IRQ_DMA0 0x00008000 /* DMA channel 0 (PPI/NFC) Interrupt */
|
|
#define IRQ_DMA3 0x00010000 /* DMA Channel 3 (SPORT0 RX) Interrupt */
|
|
#define IRQ_DMA4 0x00020000 /* DMA Channel 4 (SPORT0 TX) Interrupt */
|
|
#define IRQ_DMA5 0x00040000 /* DMA Channel 5 (SPORT1 RX) Interrupt */
|
|
#define IRQ_DMA6 0x00080000 /* DMA Channel 6 (SPORT1 TX) Interrupt */
|
|
#define IRQ_TWI 0x00100000 /* TWI Interrupt */
|
|
#define IRQ_DMA7 0x00200000 /* DMA Channel 7 (SPI) Interrupt */
|
|
#define IRQ_DMA8 0x00400000 /* DMA Channel 8 (UART0 RX) Interrupt */
|
|
#define IRQ_DMA9 0x00800000 /* DMA Channel 9 (UART0 TX) Interrupt */
|
|
#define IRQ_DMA10 0x01000000 /* DMA Channel 10 (UART1 RX) Interrupt */
|
|
#define IRQ_DMA11 0x02000000 /* DMA Channel 11 (UART1 TX) Interrupt */
|
|
#define IRQ_OTP 0x04000000 /* OTP Interrupt */
|
|
#define IRQ_CNT 0x08000000 /* GP Counter Interrupt */
|
|
#define IRQ_DMA1 0x10000000 /* DMA Channel 1 (EthernetRX/HOSTDP) Interrupt */
|
|
#define IRQ_PFA_PORTH 0x20000000 /* PF Port H Interrupt A */
|
|
#define IRQ_DMA2 0x40000000 /* DMA Channel 2 (Ethernet TX/NFC) Interrupt */
|
|
#define IRQ_PFB_PORTH 0x80000000 /* PF Port H Interrupt B */
|
|
|
|
/* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1 */
|
|
|
|
#define IRQ_TIMER0 0x00000001 /* Timer 0 Interrupt */
|
|
#define IRQ_TIMER1 0x00000002 /* Timer 1 Interrupt */
|
|
#define IRQ_TIMER2 0x00000004 /* Timer 2 Interrupt */
|
|
#define IRQ_TIMER3 0x00000008 /* Timer 3 Interrupt */
|
|
#define IRQ_TIMER4 0x00000010 /* Timer 4 Interrupt */
|
|
#define IRQ_TIMER5 0x00000020 /* Timer 5 Interrupt */
|
|
#define IRQ_TIMER6 0x00000040 /* Timer 6 Interrupt */
|
|
#define IRQ_TIMER7 0x00000080 /* Timer 7 Interrupt */
|
|
#define IRQ_PFA_PORTG 0x00000100 /* PF Port G Interrupt A */
|
|
#define IRQ_PFB_PORTG 0x00000200 /* PF Port G Interrupt B */
|
|
#define IRQ_DMA12 0x00000400 /* DMA Channels 12 (MDMA0 Destination) TX Interrupt */
|
|
#define IRQ_DMA13 0x00000400 /* DMA Channels 13 (MDMA0 Source) RX Interrupt */
|
|
#define IRQ_DMA14 0x00000800 /* DMA Channels 14 (MDMA1 Destination) TX Interrupt */
|
|
#define IRQ_DMA15 0x00000800 /* DMA Channels 15 (MDMA1 Source) RX Interrupt */
|
|
#define IRQ_WDOG 0x00001000 /* Software Watchdog Timer Interrupt */
|
|
#define IRQ_PFA_PORTF 0x00002000 /* PF Port F Interrupt A */
|
|
#define IRQ_PFB_PORTF 0x00004000 /* PF Port F Interrupt B */
|
|
#define IRQ_SPI_ERR 0x00008000 /* Error Interrupt (SPI status interrupt) */
|
|
#define IRQ_NAND_ERR 0x00010000 /* NAND error interrupt */
|
|
#define IRQ_HOSTDP_STATUS 0x00020000 /* HOSTDP status interrupt */
|
|
#define IRQ_HOSTRD_DONE 0x00040000 /* Host Read Done interrupt */
|
|
#define IRQ_USB_EINT 0x00080000 /* USB EINT interrupt */
|
|
#define IRQ_USB_INT0 0x00100000 /* USB INT0 interrupt */
|
|
#define IRQ_USB_INT1 0x00200000 /* USB INT1 interrupt */
|
|
#define IRQ_USB_INT2 0x00400000 /* USB INT1 interrupt */
|
|
#define IRQ_USB_DMAINT 0x00800000 /* USB DMAINT interrupt */
|
|
|
|
/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
|
|
#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
|
|
#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
|
|
/* x = pos 0 to 31, for 32-63 use value-32 */
|
|
#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
|
|
#ifdef _MISRA_RULES
|
|
#define IWR_DISABLE(x) (0xFFFFFFFFu^(1<<(x)))/* Wakeup Disable Peripheral #x */
|
|
#else
|
|
#define IWR_DISABLE(x) (0xFFFFFFFF^(1<<(x)))/* Wakeup Disable Peripheral #x */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
|
|
#ifdef _MISRA_RULES
|
|
#define _MF15 0xFu
|
|
#define _MF7 7u
|
|
#else
|
|
#define _MF15 0xF
|
|
#define _MF7 7
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* SIC_IAR0 Macros */
|
|
#define P0_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #0 assigned IVG #x */
|
|
#define P1_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #1 assigned IVG #x */
|
|
#define P2_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #2 assigned IVG #x */
|
|
#define P3_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #3 assigned IVG #x */
|
|
#define P4_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #4 assigned IVG #x */
|
|
#define P5_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #5 assigned IVG #x */
|
|
#define P6_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #6 assigned IVG #x */
|
|
#define P7_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #7 assigned IVG #x */
|
|
|
|
/* SIC_IAR1 Macros */
|
|
#define P8_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #8 assigned IVG #x */
|
|
#define P9_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #9 assigned IVG #x */
|
|
#define P10_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #10 assigned IVG #x */
|
|
#define P11_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #11 assigned IVG #x */
|
|
#define P12_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #12 assigned IVG #x */
|
|
#define P13_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #13 assigned IVG #x */
|
|
|
|
/* SIC_IAR2 Macros */
|
|
#define P14_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #14 assigned IVG #x */
|
|
#define P15_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #15 assigned IVG #x */
|
|
#define P16_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #16 assigned IVG #x */
|
|
#define P17_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #17 assigned IVG #x */
|
|
#define P18_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #18 assigned IVG #x */
|
|
#define P19_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #19 assigned IVG #x */
|
|
#define P20_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #20 assigned IVG #x */
|
|
#define P21_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #21 assigned IVG #x */
|
|
|
|
/* SIC_IAR3 Macros */
|
|
#define P22_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #22 assigned IVG #x */
|
|
#define P23_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #23 assigned IVG #x */
|
|
#define P24_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #24 assigned IVG #x */
|
|
#define P25_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #25 assigned IVG #x */
|
|
#define P26_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #26 assigned IVG #x */
|
|
#define P27_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #27 assigned IVG #x */
|
|
#define P28_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #28 assigned IVG #x */
|
|
#define P29_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #29 assigned IVG #x */
|
|
|
|
/* SIC_IAR4 Macros */
|
|
#define P30_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #30 assigned IVG #x */
|
|
#define P31_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #31 assigned IVG #x */
|
|
#define P32_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #32 assigned IVG #x */
|
|
#define P33_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #33 assigned IVG #x */
|
|
#define P34_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #34 assigned IVG #x */
|
|
#define P35_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #35 assigned IVG #x */
|
|
#define P36_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #36 assigned IVG #x */
|
|
#define P37_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #37 assigned IVG #x */
|
|
|
|
/* SIC_IAR5 Macros */
|
|
#define P38_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #38assigned IVG #x */
|
|
#define P39_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #39assigned IVG #x */
|
|
#define P40_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #40 assigned IVG #x */
|
|
#define P41_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #41 assigned IVG #x */
|
|
#define P42_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #42 assigned IVG #x */
|
|
#define P43_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #43 assigned IVG #x */
|
|
#define P44_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #44 assigned IVG #x */
|
|
#define P45_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #45 assigned IVG #x */
|
|
|
|
/* SIC_IAR6 Macros */
|
|
#define P46_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #46 assigned IVG #x */
|
|
#define P47_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #47 assigned IVG #x */
|
|
#define P48_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #48 assigned IVG #x */
|
|
#define P49_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #49 assigned IVG #x */
|
|
#define P50_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #50 assigned IVG #x */
|
|
#define P51_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #51 assigned IVG #x */
|
|
#define P52_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #52 assigned IVG #x */
|
|
#define P53_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #53 assigned IVG #x */
|
|
|
|
/* SIC_IAR7 Macros */
|
|
#define P54_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #54 assigned IVG #x */
|
|
#define P55_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #55 assigned IVG #x */
|
|
#define P56_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #56 assigned IVG #x */
|
|
#define P57_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #57 assigned IVG #x */
|
|
#define P58_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #58 assigned IVG #x */
|
|
#define P59_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #59 assigned IVG #x */
|
|
#define P60_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #60 assigned IVG #x */
|
|
#define P61_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #61 assigned IVG #x */
|
|
|
|
/* SIC_IMASK0 Masks */
|
|
#define SIC_UNMASK0_ALL 0x00000000 /* Unmask all peripheral interrupts */
|
|
#define SIC_MASK0_ALL 0xFFFFF3FF /* Mask all peripheral interrupts */
|
|
#ifdef _MISRA_RULES
|
|
#define SIC_MASK0(x) (1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK0(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Unmask Peripheral #x interrupt */
|
|
#else
|
|
#define SIC_MASK0(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK0(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* SIC_IMASK1 Masks */
|
|
#define SIC_UNMASK1_ALL 0x00000000 /* Unmask all peripheral interrupts */
|
|
#define SIC_MASK1_ALL 0xFFFFFF /* Mask all peripheral interrupts */
|
|
#ifdef _MISRA_RULES
|
|
#define SIC_MASK1(x) (1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK1(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Unmask Peripheral #x interrupt */
|
|
#else
|
|
#define SIC_MASK1(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK1(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
|
|
/* SIC_IWR0 Masks */
|
|
#define IWR0_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
|
|
#define IWR0_ENABLE_ALL 0xFFFFF3FF /* Wakeup Enable all peripherals */
|
|
#ifdef _MISRA_RULES
|
|
#define IWR0_ENABLE(x) (1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR0_DISABLE(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Wakeup Disable Peripheral #x */
|
|
#else
|
|
#define IWR0_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR0_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* SIC_IWR1 Masks */
|
|
#define IWR1_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
|
|
#define IWR1_ENABLE_ALL 0xFFFFFF /* Wakeup Enable all peripherals */
|
|
#ifdef _MISRA_RULES
|
|
#define IWR1_ENABLE(x) (1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR1_DISABLE(x) (0xFFFFFFFFu ^ (1 << ((x)&0x1Fu))) /* Wakeup Disable Peripheral #x */
|
|
#else
|
|
#define IWR1_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR1_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
|
|
/* ********* WATCHDOG TIMER MASKS ******************** */
|
|
|
|
/* Watchdog Timer WDOG_CTL Register Masks */
|
|
|
|
#ifdef _MISRA_RULES
|
|
#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */
|
|
#else
|
|
#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
|
|
#endif /* _MISRA_RULES */
|
|
#define WDEV_RESET 0x0000 /* generate reset event on roll over */
|
|
#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
|
|
#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
|
|
#define WDEV_NONE 0x0006 /* no event on roll over */
|
|
#define WDEN 0x0FF0 /* enable watchdog */
|
|
#define WDDIS 0x0AD0 /* disable watchdog */
|
|
#define WDRO 0x8000 /* watchdog rolled over latch */
|
|
|
|
/* depreciated WDOG_CTL Register Masks for legacy code */
|
|
|
|
|
|
#define ICTL WDEV
|
|
#define ENABLE_RESET WDEV_RESET
|
|
#define WDOG_RESET WDEV_RESET
|
|
#define ENABLE_NMI WDEV_NMI
|
|
#define WDOG_NMI WDEV_NMI
|
|
#define ENABLE_GPI WDEV_GPI
|
|
#define WDOG_GPI WDEV_GPI
|
|
#define DISABLE_EVT WDEV_NONE
|
|
#define WDOG_NONE WDEV_NONE
|
|
|
|
#define TMR_EN WDEN
|
|
#define TMR_DIS WDDIS
|
|
#define TRO WDRO
|
|
#define ICTL_P0 0x01
|
|
#define ICTL_P1 0x02
|
|
#define TRO_P 0x0F
|
|
|
|
|
|
|
|
/* *************** REAL TIME CLOCK MASKS **************************/
|
|
/* RTC_STAT and RTC_ALARM Masks */
|
|
#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
|
|
#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
|
|
#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
|
|
#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
|
|
|
|
/* RTC_ALARM Macro z=day y=hr x=min w=sec */
|
|
#ifdef _MISRA_RULES
|
|
#define SET_ALARM(z,y,x,w) ((((z)&0x7FFFu)<<0x11)|(((y)&0x1Fu)<<0xC)|(((x)&0x3Fu)<<0x6)|((w)&0x3Fu))
|
|
#else
|
|
#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* RTC_ICTL and RTC_ISTAT Masks */
|
|
#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
|
|
#define ALARM 0x0002 /* Alarm Interrupt Enable */
|
|
#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
|
|
#define MINUTE 0x0008 /* Minutes Interrupt Enable */
|
|
#define HOUR 0x0010 /* Hours Interrupt Enable */
|
|
#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
|
|
#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
|
|
#define WRITE_PENDING 0x4000 /* Write Pending Status */
|
|
#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
|
|
|
|
/* RTC_FAST / RTC_PREN Mask */
|
|
#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
|
|
|
|
|
|
/* ************** UART CONTROLLER MASKS *************************/
|
|
/* UARTx_LCR Masks */
|
|
#ifdef _MISRA_RULES
|
|
#define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */
|
|
#else
|
|
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
|
|
#endif /* _MISRA_RULES */
|
|
#define STB 0x04 /* Stop Bits */
|
|
#define PEN 0x08 /* Parity Enable */
|
|
#define EPS 0x10 /* Even Parity Select */
|
|
#define STP 0x20 /* Stick Parity */
|
|
#define SB 0x40 /* Set Break */
|
|
#define DLAB 0x80 /* Divisor Latch Access */
|
|
|
|
/* UARTx_MCR Mask */
|
|
#define LOOP_ENA 0x10 /* Loopback Mode Enable */
|
|
#define LOOP_ENA_P 0x04
|
|
|
|
/* UARTx_LSR Masks */
|
|
#define DR 0x01 /* Data Ready */
|
|
#define OE 0x02 /* Overrun Error */
|
|
#define PE 0x04 /* Parity Error */
|
|
#define FE 0x08 /* Framing Error */
|
|
#define BI 0x10 /* Break Interrupt */
|
|
#define THRE 0x20 /* THR Empty */
|
|
#define TEMT 0x40 /* TSR and UART_THR Empty */
|
|
|
|
/* UARTx_IER Masks */
|
|
#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
|
|
#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
|
|
#define ELSI 0x04 /* Enable RX Status Interrupt */
|
|
|
|
/* UARTx_IIR Masks */
|
|
#define NINT 0x01 /* Pending Interrupt */
|
|
#define STATUS 0x06 /* Highest Priority Pending Interrupt */
|
|
|
|
/* UARTx_GCTL Masks */
|
|
#define UCEN 0x01 /* Enable UARTx Clocks */
|
|
#define IREN 0x02 /* Enable IrDA Mode */
|
|
#define TPOLC 0x04 /* IrDA TX Polarity Change */
|
|
#define RPOLC 0x08 /* IrDA RX Polarity Change */
|
|
#define FPE 0x10 /* Force Parity Error On Transmit */
|
|
#define FFE 0x20 /* Force Framing Error On Transmit */
|
|
|
|
/* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */
|
|
#define UARTDLL 0x00FF /* Divisor Latch Low Byte */
|
|
#define UARTDLH 0xFF00 /* Divisor Latch High Byte */
|
|
|
|
|
|
/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
|
|
/* SPI_CTL Masks */
|
|
#define TIMOD 0x0003 /* Transfer Initiate Mode */
|
|
#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
|
|
#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
|
|
#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
|
|
#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
|
|
#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
|
|
#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
|
|
#define PSSE 0x0010 /* Slave-Select Input Enable */
|
|
#define EMISO 0x0020 /* Enable MISO As Output */
|
|
#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
|
|
#define LSBF 0x0200 /* LSB First */
|
|
#define CPHA 0x0400 /* Clock Phase */
|
|
#define CPOL 0x0800 /* Clock Polarity */
|
|
#define MSTR 0x1000 /* Master/Slave* */
|
|
#define WOM 0x2000 /* Write Open Drain Master */
|
|
#define SPE 0x4000 /* SPI Enable */
|
|
|
|
/* SPI_FLG Masks */
|
|
#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
|
|
#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
|
|
#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
|
|
#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
|
|
#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
|
|
#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
|
|
#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
|
|
#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
|
|
#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
|
|
#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
|
|
#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
|
|
#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
|
|
#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
|
|
#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
|
|
|
|
/* SPI_STAT Masks */
|
|
#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
|
|
#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
|
|
#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
|
|
#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
|
|
#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
|
|
#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
|
|
#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
|
|
|
|
|
|
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
|
|
/* TIMER_ENABLE Masks */
|
|
#define TIMEN0 0x0001 /* Enable Timer 0 */
|
|
#define TIMEN1 0x0002 /* Enable Timer 1 */
|
|
#define TIMEN2 0x0004 /* Enable Timer 2 */
|
|
#define TIMEN3 0x0008 /* Enable Timer 3 */
|
|
#define TIMEN4 0x0010 /* Enable Timer 4 */
|
|
#define TIMEN5 0x0020 /* Enable Timer 5 */
|
|
#define TIMEN6 0x0040 /* Enable Timer 6 */
|
|
#define TIMEN7 0x0080 /* Enable Timer 7 */
|
|
|
|
/* TIMER_DISABLE Masks */
|
|
#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
|
|
#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
|
|
#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
|
|
#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
|
|
#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
|
|
#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
|
|
#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
|
|
#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
|
|
|
|
/* TIMER_STATUS Masks */
|
|
#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
|
|
#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
|
|
#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
|
|
#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
|
|
#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
|
|
#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
|
|
#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
|
|
#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
|
|
#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
|
|
#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
|
|
#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
|
|
#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
|
|
#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
|
|
#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
|
|
#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
|
|
#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
|
|
#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
|
|
#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
|
|
#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
|
|
#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
|
|
#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
|
|
#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
|
|
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
|
|
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
|
|
|
|
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
|
|
#define TOVL_ERR0 TOVF_ERR0
|
|
#define TOVL_ERR1 TOVF_ERR1
|
|
#define TOVL_ERR2 TOVF_ERR2
|
|
#define TOVL_ERR3 TOVF_ERR3
|
|
#define TOVL_ERR4 TOVF_ERR4
|
|
#define TOVL_ERR5 TOVF_ERR5
|
|
#define TOVL_ERR6 TOVF_ERR6
|
|
#define TOVL_ERR7 TOVF_ERR7
|
|
|
|
/* TIMERx_CONFIG Masks */
|
|
#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
|
|
#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
|
|
#define EXT_CLK 0x0003 /* External Clock Mode */
|
|
#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
|
|
#define PERIOD_CNT 0x0008 /* Period Count */
|
|
#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
|
|
#define TIN_SEL 0x0020 /* Timer Input Select */
|
|
#define OUT_DIS 0x0040 /* Output Pad Disable */
|
|
#define CLK_SEL 0x0080 /* Timer Clock Select */
|
|
#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
|
|
#define EMU_RUN 0x0200 /* Emulation Behavior Select */
|
|
#define ERR_TYP 0xC000 /* Error Type */
|
|
|
|
|
|
/* ****************** GPIO PORTS F, G, H MASKS ***********************/
|
|
/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
|
|
/* Port F Masks */
|
|
#define PF0 0x0001
|
|
#define PF1 0x0002
|
|
#define PF2 0x0004
|
|
#define PF3 0x0008
|
|
#define PF4 0x0010
|
|
#define PF5 0x0020
|
|
#define PF6 0x0040
|
|
#define PF7 0x0080
|
|
#define PF8 0x0100
|
|
#define PF9 0x0200
|
|
#define PF10 0x0400
|
|
#define PF11 0x0800
|
|
#define PF12 0x1000
|
|
#define PF13 0x2000
|
|
#define PF14 0x4000
|
|
#define PF15 0x8000
|
|
|
|
/* Port G Masks */
|
|
#define PG0 0x0001
|
|
#define PG1 0x0002
|
|
#define PG2 0x0004
|
|
#define PG3 0x0008
|
|
#define PG4 0x0010
|
|
#define PG5 0x0020
|
|
#define PG6 0x0040
|
|
#define PG7 0x0080
|
|
#define PG8 0x0100
|
|
#define PG9 0x0200
|
|
#define PG10 0x0400
|
|
#define PG11 0x0800
|
|
#define PG12 0x1000
|
|
#define PG13 0x2000
|
|
#define PG14 0x4000
|
|
#define PG15 0x8000
|
|
|
|
/* Port H Masks */
|
|
#define PH0 0x0001
|
|
#define PH1 0x0002
|
|
#define PH2 0x0004
|
|
#define PH3 0x0008
|
|
#define PH4 0x0010
|
|
#define PH5 0x0020
|
|
#define PH6 0x0040
|
|
#define PH7 0x0080
|
|
#define PH8 0x0100
|
|
#define PH9 0x0200
|
|
#define PH10 0x0400
|
|
#define PH11 0x0800
|
|
#define PH12 0x1000
|
|
#define PH13 0x2000
|
|
#define PH14 0x4000
|
|
#define PH15 0x8000
|
|
|
|
|
|
/* ******************* SERIAL PORT MASKS **************************************/
|
|
/* SPORTx_TCR1 Masks */
|
|
#define TSPEN 0x0001 /* Transmit Enable */
|
|
#define ITCLK 0x0002 /* Internal Transmit Clock Select */
|
|
#define DTYPE_NORM 0x0000 /* Data Format Normal */
|
|
#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
|
|
#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
|
|
#define TLSBIT 0x0010 /* Transmit Bit Order */
|
|
#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
|
|
#define TFSR 0x0400 /* Transmit Frame Sync Required Select */
|
|
#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
|
|
#define LTFS 0x1000 /* Low Transmit Frame Sync Select */
|
|
#define LATFS 0x2000 /* Late Transmit Frame Sync Select */
|
|
#define TCKFE 0x4000 /* Clock Falling Edge Select */
|
|
|
|
/* SPORTx_TCR2 Masks and Macro */
|
|
#ifdef _MISRA_RULES
|
|
#define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */
|
|
#else
|
|
#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
#define TXSE 0x0100 /* TX Secondary Enable */
|
|
#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
|
|
#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
|
|
|
|
/* SPORTx_RCR1 Masks */
|
|
#define RSPEN 0x0001 /* Receive Enable */
|
|
#define IRCLK 0x0002 /* Internal Receive Clock Select */
|
|
#define DTYPE_NORM 0x0000 /* Data Format Normal */
|
|
#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
|
|
#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
|
|
#define RLSBIT 0x0010 /* Receive Bit Order */
|
|
#define IRFS 0x0200 /* Internal Receive Frame Sync Select */
|
|
#define RFSR 0x0400 /* Receive Frame Sync Required Select */
|
|
#define LRFS 0x1000 /* Low Receive Frame Sync Select */
|
|
#define LARFS 0x2000 /* Late Receive Frame Sync Select */
|
|
#define RCKFE 0x4000 /* Clock Falling Edge Select */
|
|
|
|
/* SPORTx_RCR2 Masks */
|
|
#ifdef _MISRA_RULES
|
|
#define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */
|
|
#else
|
|
#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
|
|
#endif /* _MISRA_RULES */
|
|
#define RXSE 0x0100 /* RX Secondary Enable */
|
|
#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
|
|
#define RRFST 0x0400 /* Right-First Data Order */
|
|
|
|
/* SPORTx_STAT Masks */
|
|
#define RXNE 0x0001 /* Receive FIFO Not Empty Status */
|
|
#define RUVF 0x0002 /* Sticky Receive Underflow Status */
|
|
#define ROVF 0x0004 /* Sticky Receive Overflow Status */
|
|
#define TXF 0x0008 /* Transmit FIFO Full Status */
|
|
#define TUVF 0x0010 /* Sticky Transmit Underflow Status */
|
|
#define TOVF 0x0020 /* Sticky Transmit Overflow Status */
|
|
#define TXHRE 0x0040 /* Transmit Hold Register Empty */
|
|
|
|
/* SPORTx_MCMC1 Macros */
|
|
#ifdef _MISRA_RULES
|
|
#define WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */
|
|
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
|
|
#define WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */
|
|
|
|
#else
|
|
#define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
|
|
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
|
|
#define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
|
|
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* SPORTx_MCMC2 Masks */
|
|
#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
|
|
#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
|
|
#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
|
|
#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
|
|
#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
|
|
#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
|
|
#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
|
|
#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
|
|
#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
|
|
#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
|
|
#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
|
|
#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
|
|
#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
|
|
#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
|
|
#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
|
|
#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
|
|
#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
|
|
#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
|
|
#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
|
|
#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
|
|
#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
|
|
#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
|
|
#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
|
|
|
|
|
|
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
|
|
/* EBIU_AMGCTL Masks */
|
|
#define AMCKEN 0x0001 /* Enable CLKOUT */
|
|
#define AMBEN 0x000e /* Async bank enable */
|
|
#define AMBEN_NONE 0x0000 /* All Banks Disabled */
|
|
#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
|
|
#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
|
|
#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
|
|
#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
|
|
#define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */
|
|
|
|
/* EBIU_AMBCTL0 Masks */
|
|
#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
|
|
#define B0RDYPOL 0x00000002 /* B0 RDY Active High */
|
|
#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
|
|
#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
|
|
#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
|
|
#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
|
|
#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
|
|
#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
|
|
#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
|
|
#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
|
|
#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
|
|
#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
|
|
#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
|
|
#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
|
|
#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
|
|
#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
|
|
#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
|
|
#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
|
|
#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
|
|
#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
|
|
#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
|
|
#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
|
|
#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
|
|
#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
|
|
#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
|
|
#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
|
|
#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
|
|
#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
|
|
#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
|
|
#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
|
|
#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
|
|
#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
|
|
#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
|
|
#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
|
|
#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
|
|
#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
|
|
|
|
#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
|
|
#define B1RDYPOL 0x00020000 /* B1 RDY Active High */
|
|
#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
|
|
#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
|
|
#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
|
|
#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
|
|
#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
|
|
#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
|
|
#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
|
|
#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
|
|
#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
|
|
#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
|
|
#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
|
|
#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
|
|
#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
|
|
#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
|
|
#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
|
|
#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
|
|
#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
|
|
#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
|
|
#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
|
|
#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
|
|
#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
|
|
#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
|
|
#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
|
|
#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
|
|
#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
|
|
#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
|
|
#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
|
|
#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
|
|
#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
|
|
#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
|
|
#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
|
|
#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
|
|
#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
|
|
#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
|
|
|
|
/* EBIU_AMBCTL1 Masks */
|
|
#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
|
|
#define B2RDYPOL 0x00000002 /* B2 RDY Active High */
|
|
#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
|
|
#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
|
|
#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
|
|
#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
|
|
#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
|
|
#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
|
|
#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
|
|
#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
|
|
#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
|
|
#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
|
|
#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
|
|
#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
|
|
#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
|
|
#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
|
|
#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
|
|
#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
|
|
#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
|
|
#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
|
|
#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
|
|
#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
|
|
#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
|
|
#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
|
|
#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
|
|
#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
|
|
#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
|
|
#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
|
|
#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
|
|
#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
|
|
#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
|
|
#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
|
|
#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
|
|
#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
|
|
#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
|
|
#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
|
|
|
|
#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
|
|
#define B3RDYPOL 0x00020000 /* B3 RDY Active High */
|
|
#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
|
|
#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
|
|
#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
|
|
#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
|
|
#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
|
|
#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
|
|
#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
|
|
#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
|
|
#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
|
|
#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
|
|
#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
|
|
#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
|
|
#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
|
|
#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
|
|
#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
|
|
#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
|
|
#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
|
|
#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
|
|
#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
|
|
#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
|
|
#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
|
|
#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
|
|
#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
|
|
#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
|
|
#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
|
|
#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
|
|
#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
|
|
#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
|
|
#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
|
|
#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
|
|
#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
|
|
#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
|
|
#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
|
|
#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
|
|
|
|
|
|
/* ********************** SDRAM CONTROLLER MASKS **********************************************/
|
|
/* EBIU_SDGCTL Masks */
|
|
#define SCTLE 0x00000001 /* Enable SDRAM Signals */
|
|
#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
|
|
#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
|
|
/* EBIU_SDGCTL Masks */
|
|
#define CL 0x0000000C /* SDRAM CAS latency */
|
|
#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
|
|
#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
|
|
#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
|
|
#define PASR 0x00000030 /* SDRAM partial array self-refresh */
|
|
#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
|
|
#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
|
|
#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
|
|
#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
|
|
#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
|
|
#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
|
|
#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
|
|
#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
|
|
#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
|
|
#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
|
|
#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
|
|
#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
|
|
#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
|
|
#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
|
|
#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
|
|
#define TRAS 0x000003C0 /* SDRAM tRAS in SCLK cycles */
|
|
#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
|
|
#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
|
|
#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
|
|
#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
|
|
#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
|
|
#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
|
|
#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
|
|
#define TRP 0x00003800 /* SDRAM tRP in SCLK cycles */
|
|
#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
|
|
#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
|
|
#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
|
|
#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
|
|
#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
|
|
#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
|
|
#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
|
|
#define TRCD 0x00030000 /* SDRAM tRCD in SCLK cycles */
|
|
#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
|
|
#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
|
|
#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
|
|
#define TWR 0x00180000 /* SDRAM tWR in SCLK cycles */
|
|
#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
|
|
#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
|
|
#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
|
|
#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
|
|
#define EBUFE 0x02000000 /* Enable External Buffering Timing */
|
|
#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
|
|
#define EMREN 0x10000000 /* Extended Mode Register Enable */
|
|
#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
|
|
#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
|
|
|
|
/* EBIU_SDBCTL Masks */
|
|
#define EBE 0x0001 /* Enable SDRAM External Bank */
|
|
#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
|
|
#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
|
|
#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
|
|
#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
|
|
#define EBSZ 0x0006 /* SDRAM external bank size */
|
|
#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
|
|
#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
|
|
#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
|
|
#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
|
|
#define EBCAW 0x0030 /* SDRAM external bank column address width */
|
|
|
|
/* EBIU_SDSTAT Masks */
|
|
#define SDCI 0x0001 /* SDRAM Controller Idle */
|
|
#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
|
|
#define SDPUA 0x0004 /* SDRAM Power-Up Active */
|
|
#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
|
|
#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
|
|
#define BGSTAT 0x0020 /* Bus Grant Status */
|
|
|
|
|
|
/* ************************** DMA CONTROLLER MASKS ********************************/
|
|
/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
|
|
#define DMAEN 0x0001 /* DMA Channel Enable */
|
|
#define WNR 0x0002 /* Channel Direction (W/R*) */
|
|
#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
|
|
#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
|
|
#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
|
|
#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
|
|
#define SYNC 0x0020 /* DMA Buffer Clear */
|
|
#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
|
|
#define DI_EN 0x0080 /* Data Interrupt Enable */
|
|
#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
|
|
#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
|
|
#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
|
|
#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
|
|
#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
|
|
#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
|
|
#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
|
|
#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
|
|
#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
|
|
#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
|
|
#define FLOW_STOP 0x0000 /* Stop Mode */
|
|
#define FLOW_AUTO 0x1000 /* Autobuffer Mode */
|
|
#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */
|
|
#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
|
|
#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
|
|
|
|
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
|
|
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
|
|
#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
|
|
#define PMAP_PPI 0x0000 /* PPI Port DMA */
|
|
#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
|
|
#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
|
|
#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
|
|
#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
|
|
#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
|
|
#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
|
|
#define PMAP_SPI 0x7000 /* SPI Port DMA */
|
|
#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
|
|
#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
|
|
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
|
|
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
|
|
|
|
/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
|
|
#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
|
|
#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
|
|
#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
|
|
#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
|
|
|
|
|
|
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
|
|
/* PPI_CONTROL Masks */
|
|
#define PORT_EN 0x0001 /* PPI Port Enable */
|
|
#define PORT_DIR 0x0002 /* PPI Port Direction */
|
|
#define XFR_TYPE 0x000C /* PPI Transfer Type */
|
|
#define PORT_CFG 0x0030 /* PPI Port Configuration */
|
|
#define FLD_SEL 0x0040 /* PPI Active Field Select */
|
|
#define PACK_EN 0x0080 /* PPI Packing Mode */
|
|
/* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
|
|
#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
|
|
#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
|
|
#define DLEN_8 0x0000 /* Data Length = 8 Bits */
|
|
#define DLEN_10 0x0800 /* Data Length = 10 Bits */
|
|
#define DLEN_11 0x1000 /* Data Length = 11 Bits */
|
|
#define DLEN_12 0x1800 /* Data Length = 12 Bits */
|
|
#define DLEN_13 0x2000 /* Data Length = 13 Bits */
|
|
#define DLEN_14 0x2800 /* Data Length = 14 Bits */
|
|
#define DLEN_15 0x3000 /* Data Length = 15 Bits */
|
|
#define DLEN_16 0x3800 /* Data Length = 16 Bits */
|
|
#define POLC 0x4000 /* PPI Clock Polarity */
|
|
#define POLS 0x8000 /* PPI Frame Sync Polarity */
|
|
|
|
/* PPI_STATUS Masks */
|
|
#define LT_ERR_OVR 0x0100 /* Line Track Overflow Error */
|
|
#define LT_ERR_UNDR 0x0200 /* Line Track Underflow Error */
|
|
#define FLD 0x0400 /* Field Indicator */
|
|
#define FT_ERR 0x0800 /* Frame Track Error */
|
|
#define OVR 0x1000 /* FIFO Overflow Error */
|
|
#define UNDR 0x2000 /* FIFO Underrun Error */
|
|
#define ERR_DET 0x4000 /* Error Detected Indicator */
|
|
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
|
|
|
|
|
|
/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
|
|
/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
|
|
#ifdef _MISRA_RULES
|
|
#define CLKLOW(x) ((x) & 0xFFu) /* Periods Clock Is Held Low */
|
|
#define CLKHI(y) (((y)&0xFFu)<<0x8) /* Periods Before New Clock Low */
|
|
#else
|
|
#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
|
|
#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
|
|
#endif /* _MISRA_RULES */
|
|
|
|
/* TWI_PRESCALE Masks */
|
|
#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
|
|
#define TWI_ENA 0x0080 /* TWI Enable */
|
|
#define SCCB 0x0200 /* SCCB Compatibility Enable */
|
|
|
|
/* TWI_SLAVE_CTRL Masks */
|
|
#define SEN 0x0001 /* Slave Enable */
|
|
#define SADD_LEN 0x0002 /* Slave Address Length */
|
|
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
|
|
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
|
|
#define GEN 0x0010 /* General Call Adrress Matching Enabled */
|
|
|
|
/* TWI_SLAVE_STAT Masks */
|
|
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
|
|
#define GCALL 0x0002 /* General Call Indicator */
|
|
|
|
/* TWI_MASTER_CTRL Masks */
|
|
#define MEN 0x0001 /* Master Mode Enable */
|
|
#define MADD_LEN 0x0002 /* Master Address Length */
|
|
#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
|
|
#define FAST 0x0008 /* Use Fast Mode Timing Specs */
|
|
#define STOP 0x0010 /* Issue Stop Condition */
|
|
#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
|
|
#define DCNT 0x3FC0 /* Data Bytes To Transfer */
|
|
#define SDAOVR 0x4000 /* Serial Data Override */
|
|
#define SCLOVR 0x8000 /* Serial Clock Override */
|
|
|
|
/* TWI_MASTER_STAT Masks */
|
|
#define MPROG 0x0001 /* Master Transfer In Progress */
|
|
#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
|
|
#define ANAK 0x0004 /* Address Not Acknowledged */
|
|
#define DNAK 0x0008 /* Data Not Acknowledged */
|
|
#define BUFRDERR 0x0010 /* Buffer Read Error */
|
|
#define BUFWRERR 0x0020 /* Buffer Write Error */
|
|
#define SDASEN 0x0040 /* Serial Data Sense */
|
|
#define SCLSEN 0x0080 /* Serial Clock Sense */
|
|
#define BUSBUSY 0x0100 /* Bus Busy Indicator */
|
|
|
|
/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
|
|
#define SINIT 0x0001 /* Slave Transfer Initiated */
|
|
#define SCOMP 0x0002 /* Slave Transfer Complete */
|
|
#define SERR 0x0004 /* Slave Transfer Error */
|
|
#define SOVF 0x0008 /* Slave Overflow */
|
|
#define MCOMP 0x0010 /* Master Transfer Complete */
|
|
#define MERR 0x0020 /* Master Transfer Error */
|
|
#define XMTSERV 0x0040 /* Transmit FIFO Service */
|
|
#define RCVSERV 0x0080 /* Receive FIFO Service */
|
|
|
|
/* TWI_FIFO_CTRL Masks */
|
|
#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
|
|
#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
|
|
#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
|
|
#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
|
|
|
|
/* TWI_FIFO_STAT Masks */
|
|
#define XMTSTAT 0x0003 /* Transmit FIFO Status */
|
|
#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
|
|
#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
|
|
#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
|
|
|
|
#define RCVSTAT 0x000C /* Receive FIFO Status */
|
|
#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
|
|
#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
|
|
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
|
|
|
|
|
|
/* Omit CAN masks from defBF534.h */
|
|
|
|
/* ******************* PIN CONTROL REGISTER MASKS ************************/
|
|
/* PORT_MUX deleted in VisualDSP++ 5.0 Update 3 */
|
|
|
|
|
|
/* ****************** HANDSHAKE DMA (HMDMA) MASKS *********************/
|
|
/* HMDMAx_CTL Masks */
|
|
#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
|
|
#define REP 0x0002 /* HMDMA Request Polarity */
|
|
#define UTE 0x0004 /* Urgency Threshold Enable */
|
|
#define OIE 0x0010 /* Overflow Interrupt Enable */
|
|
#define BDIE 0x0020 /* Block Done Interrupt Enable */
|
|
#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
|
|
#define DRQ 0x0300 /* HMDMA Request Type */
|
|
#define DRQ_NONE 0x0000 /* No Request */
|
|
#define DRQ_SINGLE 0x0100 /* Channels Request Single */
|
|
#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
|
|
#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
|
|
#define RBC 0x1000 /* Reload BCNT With IBCNT */
|
|
#define PS 0x2000 /* HMDMA Pin Status */
|
|
#define OI 0x4000 /* Overflow Interrupt Generated */
|
|
#define BDI 0x8000 /* Block Done Interrupt Generated */
|
|
|
|
/* entry addresses of the user-callable Boot ROM functions */
|
|
|
|
#define _BOOTROM_RESET 0xEF000000
|
|
#define _BOOTROM_FINAL_INIT 0xEF000002
|
|
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
|
|
#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
|
|
#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
|
|
#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
|
|
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
|
|
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
|
|
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
|
|
|
|
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
|
|
#define PGDE_UART PFDE_UART
|
|
#define PGDE_DMA PFDE_DMA
|
|
#define CKELOW SCKELOW
|
|
|
|
/* ==== end from defBF534.h ==== */
|
|
|
|
/* HOST Port Registers */
|
|
|
|
#define HOST_CONTROL 0xffc03400 /* HOSTDP Control Register */
|
|
#define HOST_STATUS 0xffc03404 /* HOSTDP Status Register */
|
|
#define HOST_TIMEOUT 0xffc03408 /* HOSTDP Acknowledge Mode Timeout Register */
|
|
|
|
/* Counter Registers */
|
|
|
|
#define CNT_CONFIG 0xffc03500 /* Configuration Register */
|
|
#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
|
|
#define CNT_STATUS 0xffc03508 /* Status Register */
|
|
#define CNT_COMMAND 0xffc0350c /* Command Register */
|
|
#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
|
|
#define CNT_COUNTER 0xffc03514 /* Counter Register */
|
|
#define CNT_MAX 0xffc03518 /* Maximal Count Register */
|
|
#define CNT_MIN 0xffc0351c /* Minimal Count Register */
|
|
|
|
/* OTP/FUSE Registers */
|
|
|
|
#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
|
|
#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
|
|
#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
|
|
#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
|
|
|
|
/* Security Registers */
|
|
|
|
#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
|
|
#define SECURE_CONTROL 0xffc03624 /* Secure Control */
|
|
#define SECURE_STATUS 0xffc03628 /* Secure Status */
|
|
|
|
/* OTP Read/Write Data Buffer Registers */
|
|
|
|
#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
|
|
/* NFC Registers */
|
|
|
|
#define NFC_CTL 0xffc03700 /* NAND Control Register */
|
|
#define NFC_STAT 0xffc03704 /* NAND Status Register */
|
|
#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */
|
|
#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */
|
|
#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */
|
|
#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */
|
|
#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */
|
|
#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */
|
|
#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */
|
|
#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */
|
|
#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */
|
|
#define NFC_READ 0xffc0372c /* NAND Read Data Register */
|
|
#define NFC_ADDR 0xffc03740 /* NAND Address Register */
|
|
#define NFC_CMD 0xffc03744 /* NAND Command Register */
|
|
#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */
|
|
#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */
|
|
|
|
/* ********************************************************** */
|
|
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
|
|
/* and MULTI BIT READ MACROS */
|
|
/* ********************************************************** */
|
|
|
|
/* Bit masks for HOST_CONTROL */
|
|
|
|
#define HOSTDP_EN 0x1 /* HOSTDP Enable */
|
|
#define nHOSTDP_EN 0x0
|
|
#define HOSTDP_END 0x2 /* Host Endianess */
|
|
#define nHOSTDP_END 0x0
|
|
#define HOSTDP_DATA_SIZE 0x4 /* Data Size */
|
|
#define nHOSTDP_DATA_SIZE 0x0
|
|
#define HOSTDP_RST 0x8 /* HOSTDP Reset */
|
|
#define nHOSTDP_RST 0x0
|
|
#define HRDY_OVR 0x20 /* HRDY Override */
|
|
#define nHRDY_OVR 0x0
|
|
#define INT_MODE 0x40 /* Interrupt Mode */
|
|
#define nINT_MODE 0x0
|
|
#define BT_EN 0x80 /* Bus Timeout Enable */
|
|
#define nBT_EN 0x0
|
|
#define EHW 0x100 /* Enable Host Write */
|
|
#define nEHW 0x0
|
|
#define EHR 0x200 /* Enable Host Read */
|
|
#define nEHR 0x0
|
|
#define BDR 0x400 /* Burst DMA Requests */
|
|
#define nBDR 0x0
|
|
|
|
/* Bit masks for HOST_STATUS */
|
|
|
|
#define DMA_RDY 0x1 /* DMA Ready */
|
|
#define nDMA_RDY 0x0
|
|
#define FIFOFULL 0x2 /* FIFO Full */
|
|
#define nFIFOFULL 0x0
|
|
#define FIFOEMPTY 0x4 /* FIFO Empty */
|
|
#define nFIFOEMPTY 0x0
|
|
#define DMA_CMPLT 0x8 /* DMA Complete */
|
|
#define nDMA_CMPLT 0x0
|
|
#define HSHK 0x10 /* Host Handshake */
|
|
#define nHSHK 0x0
|
|
#define HOSTDP_TOUT 0x20 /* HOSTDP Timeout */
|
|
#define nHOSTDP_TOUT 0x0
|
|
#define HIRQ 0x40 /* Host Interrupt Request */
|
|
#define nHIRQ 0x0
|
|
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
|
|
#define nALLOW_CNFG 0x0
|
|
#define DMA_DIR 0x100 /* DMA Direction */
|
|
#define nDMA_DIR 0x0
|
|
#define BTE 0x200 /* Bus Timeout Enabled */
|
|
#define nBTE 0x0
|
|
#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
|
|
#define nHOSTRD_DONE 0x0
|
|
|
|
/* Bit masks for HOST_TIMEOUT */
|
|
|
|
#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
|
|
|
|
/* Bit masks for CNT_CONFIG */
|
|
|
|
#define CNTE 0x1 /* Counter Enable */
|
|
#define nCNTE 0x0
|
|
#define DEBE 0x2 /* Debounce Enable */
|
|
#define nDEBE 0x0
|
|
#define CDGINV 0x10 /* CDG Pin Polarity Invert */
|
|
#define nCDGINV 0x0
|
|
#define CUDINV 0x20 /* CUD Pin Polarity Invert */
|
|
#define nCUDINV 0x0
|
|
#define CZMINV 0x40 /* CZM Pin Polarity Invert */
|
|
#define nCZMINV 0x0
|
|
#define CNTMODE 0x700 /* Counter Operating Mode */
|
|
#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
|
|
#define nZMZC 0x0
|
|
#define BNDMODE 0x3000 /* Boundary register Mode */
|
|
#define INPDIS 0x8000 /* CUG and CDG Input Disable */
|
|
#define nINPDIS 0x0
|
|
|
|
/* Bit masks for CNT_IMASK */
|
|
|
|
#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
|
|
#define nICIE 0x0
|
|
#define UCIE 0x2 /* Up count Interrupt Enable */
|
|
#define nUCIE 0x0
|
|
#define DCIE 0x4 /* Down count Interrupt Enable */
|
|
#define nDCIE 0x0
|
|
#define MINCIE 0x8 /* Min Count Interrupt Enable */
|
|
#define nMINCIE 0x0
|
|
#define MAXCIE 0x10 /* Max Count Interrupt Enable */
|
|
#define nMAXCIE 0x0
|
|
#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
|
|
#define nCOV31IE 0x0
|
|
#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
|
|
#define nCOV15IE 0x0
|
|
#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
|
|
#define nCZEROIE 0x0
|
|
#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
|
|
#define nCZMIE 0x0
|
|
#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
|
|
#define nCZMEIE 0x0
|
|
#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
|
|
#define nCZMZIE 0x0
|
|
|
|
/* Bit masks for CNT_STATUS */
|
|
|
|
#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
|
|
#define nICII 0x0
|
|
#define UCII 0x2 /* Up count Interrupt Identifier */
|
|
#define nUCII 0x0
|
|
#define DCII 0x4 /* Down count Interrupt Identifier */
|
|
#define nDCII 0x0
|
|
#define MINCII 0x8 /* Min Count Interrupt Identifier */
|
|
#define nMINCII 0x0
|
|
#define MAXCII 0x10 /* Max Count Interrupt Identifier */
|
|
#define nMAXCII 0x0
|
|
#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
|
|
#define nCOV31II 0x0
|
|
#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
|
|
#define nCOV15II 0x0
|
|
#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
|
|
#define nCZEROII 0x0
|
|
#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
|
|
#define nCZMII 0x0
|
|
#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
|
|
#define nCZMEII 0x0
|
|
#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
|
|
#define nCZMZII 0x0
|
|
|
|
/* Bit masks for CNT_COMMAND */
|
|
|
|
#define W1LCNT 0xf /* Load Counter Register */
|
|
#define W1LMIN 0xf0 /* Load Min Register */
|
|
#define W1LMAX 0xf00 /* Load Max Register */
|
|
#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
|
|
#define nW1ZMONCE 0x0
|
|
|
|
/* Bit masks for CNT_DEBOUNCE */
|
|
|
|
#define DPRESCALE 0xf /* Load Counter Register */
|
|
|
|
/* Bit masks for SECURE_SYSSWT */
|
|
|
|
#define EMUDABL 0x1 /* Emulation Disable. */
|
|
#define nEMUDABL 0x0
|
|
#define RSTDABL 0x2 /* Reset Disable */
|
|
#define nRSTDABL 0x0
|
|
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
|
|
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
|
|
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
|
|
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
|
|
#define nDMA0OVR 0x0
|
|
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
|
|
#define nDMA1OVR 0x0
|
|
#define EMUOVR 0x4000 /* Emulation Override */
|
|
#define nEMUOVR 0x0
|
|
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
|
|
#define nOTPSEN 0x0
|
|
|
|
/* Bit masks for SECURE_CONTROL */
|
|
|
|
#define SECURE0 0x1 /* SECURE 0 */
|
|
#define nSECURE0 0x0
|
|
#define SECURE1 0x2 /* SECURE 1 */
|
|
#define nSECURE1 0x0
|
|
#define SECURE2 0x4 /* SECURE 2 */
|
|
#define nSECURE2 0x0
|
|
#define SECURE3 0x8 /* SECURE 3 */
|
|
#define nSECURE3 0x0
|
|
|
|
/* Bit masks for SECURE_STATUS */
|
|
|
|
#define SECMODE 0x3 /* Secured Mode Control State */
|
|
#define NMI 0x4 /* Non Maskable Interrupt */
|
|
#define nNMI 0x0
|
|
#define AFVALID 0x8 /* Authentication Firmware Valid */
|
|
#define nAFVALID 0x0
|
|
#define AFEXIT 0x10 /* Authentication Firmware Exit */
|
|
#define nAFEXIT 0x0
|
|
#define SECSTAT 0xe0 /* Secure Status */
|
|
|
|
/* Bit masks for NFC_CTL */
|
|
|
|
#define WR_DLY 0xf /* Write Strobe Delay */
|
|
#define RD_DLY 0xf0 /* Read Strobe Delay */
|
|
#define PG_SIZE 0x200 /* Page Size */
|
|
#define nPG_SIZE 0x0
|
|
|
|
/* Bit masks for NFC_STAT */
|
|
|
|
#define NBUSY 0x1 /* Not Busy */
|
|
#define nNBUSY 0x0
|
|
#define WB_FULL 0x2 /* Write Buffer Full */
|
|
#define nWB_FULL 0x0
|
|
#define PG_WR_STAT 0x4 /* Page Write Pending */
|
|
#define nPG_WR_STAT 0x0
|
|
#define PG_RD_STAT 0x8 /* Page Read Pending */
|
|
#define nPG_RD_STAT 0x0
|
|
#define WB_EMPTY 0x10 /* Write Buffer Empty */
|
|
#define nWB_EMPTY 0x0
|
|
|
|
/* Bit masks for NFC_IRQSTAT */
|
|
|
|
#define NBUSYIRQ 0x1 /* Not Busy IRQ */
|
|
#define nNBUSYIRQ 0x0
|
|
#define WB_OVF 0x2 /* Write Buffer Overflow */
|
|
#define nWB_OVF 0x0
|
|
#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
|
|
#define nWB_EDGE 0x0
|
|
#define RD_RDY 0x8 /* Read Data Ready */
|
|
#define nRD_RDY 0x0
|
|
#define WR_DONE 0x10 /* Page Write Done */
|
|
#define nWR_DONE 0x0
|
|
|
|
/* Bit masks for NFC_IRQMASK */
|
|
|
|
#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
|
|
#define nMASK_BUSYIRQ 0x0
|
|
#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
|
|
#define nMASK_WBOVF 0x0
|
|
#define MASK_WBEDGE 0x4 /* Mask Write Buffer Edge Detect */
|
|
#define nMASK_WBEDGE 0x0
|
|
#define MASK_RDRDY 0x8 /* Mask Read Data Ready */
|
|
#define nMASK_RDRDY 0x0
|
|
#define MASK_WRDONE 0x10 /* Mask Write Done */
|
|
#define nMASK_WRDONE 0x0
|
|
|
|
/* Bit masks for NFC_RST */
|
|
|
|
#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
|
|
#define nECC_RST 0x0
|
|
|
|
/* Bit masks for NFC_PGCTL */
|
|
|
|
#define PG_RD_START 0x1 /* Page Read Start */
|
|
#define nPG_RD_START 0x0
|
|
#define PG_WR_START 0x2 /* Page Write Start */
|
|
#define nPG_WR_START 0x0
|
|
|
|
/* Bit masks for NFC_ECC0 */
|
|
|
|
#define ECC0 0x7ff /* Parity Calculation Result0 */
|
|
|
|
/* Bit masks for NFC_ECC1 */
|
|
|
|
#define ECC1 0x7ff /* Parity Calculation Result1 */
|
|
|
|
/* Bit masks for NFC_ECC2 */
|
|
|
|
#define ECC2 0x7ff /* Parity Calculation Result2 */
|
|
|
|
/* Bit masks for NFC_ECC3 */
|
|
|
|
#define ECC3 0x7ff /* Parity Calculation Result3 */
|
|
|
|
/* Bit masks for NFC_COUNT */
|
|
|
|
#define ECCCNT 0x3ff /* Transfer Count */
|
|
|
|
#ifdef _MISRA_RULES
|
|
#pragma diag(pop)
|
|
#endif /* _MISRA_RULES */
|
|
|
|
#endif /* _DEF_BF52X_H */
|