newlib-cygwin/winsup/cygserver/cygserver.conf

148 lines
5.3 KiB
Plaintext

# cygserver.conf
#
# Contains configurable parameters for the cygserver.
#
# The format of this file is easy. Lines beginning with a hash `#' are
# comments and ignored. Lines consisting of only whitespaces are ignored.
# Any other line is a setting for cygserver.
# A setting consists of a name/value pair, separated by whitespace.
# Each line must only consist of one name/value pair.
# Lines must not be longer than 1023 characters.
#
# Some settings can be overridden by a command line switch. If so, it's
# mentioned below.
#
# Settings which are commented out will use the default values. These are
# mentioned below, too.
# kern.srv.cleanup_threads: No. of cygserver threads used for cleanup tasks.
# Default: 2, Min: 1, Max: 16, command line option -c, --cleanup-threads
#kern.srv.cleanup_threads 2
# kern.srv.request_threads: No. of cygserver threads used to serve
# application requests.
# Default: 10, Min: 1, Max: 310, command line option -r, --request-threads
#kern.srv.request_threads 10
# kern.srv.process_cache_size: No. of concurrent processes which can be handled
# by Cygserver concurrently.
# Default: 62, Min: 1, Max: 310, command line option -p, --process-cache
#kern.srv.process_cache_size 62
# kern.srv.msgqueues: Determines whether XSI Message Queue support should be
# started, "yes" (or "true", "y", "t", "1") or "no" (or "false", "n", "f", "0").
# These values are valid for all binary type options.
# Default is "yes". Command line option -q, --no-msgqueues
#kern.srv.msgqueues yes
# kern.srv.semaphores: Determines whether XSI Semaphore support should be
# started. Default is "yes". Command line option -s, --no-semaphores
#kern.srv.semaphores yes
# kern.srv.sharedmem: Determines whether XSI Shared Memory support should be
# started. Default is "yes". Command line option -m, --no-sharedmem
#kern.srv.sharedmem yes
# LOGGING
# kern.log.syslog: Determines whether logging should go to the syslog,
# Default is "yes", if stderr is no tty, "no" otherwise.
# Command line option -y, --syslog or -Y, --no-syslog.
#kern.log.syslog no
# kern.log.stderr: Determines whether logging should go to stderr,
# Default is "yes", if stderr is a tty, "no" otherwise.
# Command line option -e, --stderr or -E, --no-stderr.
#kern.log.stderr no
# kern.log.level: Logging level. Valid values are 1 to 7 with a bigger
# value emitting more logging output. Default level is 6.
# Command line option -l, --log-level.
#kern.log.level 6
# kern.log.debug: Determines whether debug output should be printed to stderr.
# Default is "no". Command line option -d, --debug
#kern.log.debug no
# XSI message queue parameters.
#
# Each message is broken up and stored in segments that are msgssz bytes
# long. For efficiency reasons, this should be a power of two. Also,
# it doesn't make sense if it is less than 8 or greater than about 256.
# kern.ipc.msgseg: Maximum no. of message queue segments hold concurrently.
# Default: 2048, Min: 256, Max: 65535
#kern.ipc.msgseg 2048
# kern.ipc.msgssz: Size of segment in bytes. Must be a power of 2 value.
# Default: 8, Min: 8, Max: 1024
#kern.ipc.msgssz 8
# kern.ipc.msgmnb: Maximum no. of bytes in a single message queue.
# Default: 2048, Min: 1, Max: 65535
#kern.ipc.msgmnb 2048
# kern.ipc.msgmni: Maximum no. of message queue identifiers hold concurrently.
# Default: 40, Min: 1, Max: 1024
#kern.ipc.msgmni 40
# kern.ipc.msgtql: Maximum no. of messages hold concurrently.
# Default: 40, Min: 1, Max: 1024
#kern.ipc.msgtql 40
# XSI semaphore parameters
# kern.ipc.semmni: Maximum no. of semaphore identifiers hold concurrently.
# Default: 10, Min: 1, Max: 1024
#kern.ipc.semmni 10
# kern.ipc.semmns: Maximum no. of semaphores hold concurrently.
# Default: 60, Min: 1, Max: 1024
#kern.ipc.semmns 60
# kern.ipc.semmnu: Total no. of undo structures hold by server.
# Default: 30, Min: 1, Max: 1024
#kern.ipc.semmnu 30
# kern.ipc.semmsl: Maximum no. of semaphores per semaphore id.
# Default: 60, Min: 1, Max: 1024
#kern.ipc.semmsl 60
# kern.ipc.semopm: Maximum no. of operations per semop call.
# Default: 100, Min: 1, Max: 1024
#kern.ipc.semopm 100
# kern.ipc.semume: Maximum no. of undo entries per process.
# Default: 10, Min: 1, Max: 1024
#kern.ipc.semume 10
# kern.ipc.semvmx: Maximum value of a semaphore.
# Default: 32767, Min: 1, Max: 32767
#kern.ipc.semvmx 32767
# kern.ipc.semaem: Maximum value to adjust on process exit.
# Default: 16384, Min: 1, Max: 32767
#kern.ipc.semaem 16384
# XSI shared memory parameters
# kern.ipc.shmmaxpgs: Maximum pages available for XSI shared memory.
# Changing shmmaxpgs immediately affects setting SHMMAX. The relation
# between shmmaxpgs and SHMMAX is: SHMMAX = shmmaxpgs * getpagesize().
# Default: 8192, Min: 1, Max: 32767
#kern.ipc.shmmaxpgs 8192
# kern.ipc.shmmni: Maximum number of shared memory segments, system wide.
# Default: 192, Min: 1, Max: 32767
#kern.ipc.shmmni 192
# kern.ipc.shmseg: Maximum number of shared memory segments per process.
# Default: 128, Min: 1, Max: 32767
#kern.ipc.shmseg 128
# kern.ipc.shm_allow_removed: Determines whether a process is allowed to
# attach to a shared memory segment (using the shmat call) after a successful
# call to shmctl(IPC_RMID). This is a Linux-specific, and therefore
# non-portable feature. Use with care. Default is "no".
#kern.ipc.shm_allow_removed no